Association of preharvest management with oxidative protection and enzymatic browning in minimally processed cassava

Chemical and Thermal Treatment for Drying Cassava Tubers: Optimization, Microstructure, and Dehydration Kinetics

Perishable commodities like cassava necessitate effective postharvest preservation for various industrial applications. Hence, optimizing pretreatment processes and modeling drying kinetics hold paramount importance. This study aimed to optimize cassava pretreatment using the central composite design of a response surface methodology while also assessing microstructure and dehydration kinetics. Diverse chemical and thermal pretreatments were explored, encompassing sodium metabisulfite concentrations (0-4% w/w), citric acid concentrations (0-4% w/w), and blanching time (0-4 min). The four investigated responses were moisture content, whiteness index, activation energy (Ea), and effective moisture diffusivity (Deff). Employing five established drying models, suitability was appraised after optimal pretreatment conditions were determined. The findings revealed that moisture content ranged from 5.82 to 9.42% db, whereas the whiteness index ranged from 87.16 to 94.23. Deff and Ea ranged from 5.06 × 10-9 to 6.71 × 10-9 m2/s and 29.65-33.28 kJ/mol, respectively. The optimal pretreatment conditions for dried cassava were identified by optimizing the use of 1.31% citric acid, 1.03% sodium metabisulfite, and blanching time for 1.01 min. The microstructure indicated that particular chemical and thermal pretreatment configurations yielded particles in the shape of circular and elliptical granules. The logarithmic model provided the most accurate description of the dehydration kinetics, with the highest R2 value (0.9859) and the lowest χ2, RSME, and SSE values of 0.0351, 0.0015, and 0.0123, respectively.

Application of Central Composite Design and Superimposition Approach for Optimization of Drying Parameters of Pretreated Cassava Flour

The primary goals of this study were to identify the influence of temperature and drying time on pretreated cassava flour, as well as the optimal settings for the factors and to analyze the microstructure of cassava flour. The experiment was designed using the response surface methodology with central composite design and the superimposition approach in order to assess the effect of drying temperature (45.85-74.14 °C) and drying time (3.96-11.03 h) and the optimal drying conditions of the cassava flour investigated. Soaking and blanching were applied as pretreatments to freshly sliced cassava tubers. The value moisture content of cassava flour was between 6.22% and 11.07%, whereas the observed whiteness index in cassava flour ranged from 72.62 to 92.67 in all pretreated cassava flour samples. Through analysis of variance, each drying factor, their interaction, and all squared terms had a substantial impact on moisture content and whiteness index. The optimized values for drying temperature and drying time for each pretreated cassava flour were 70 °C and 10 h, respectively. The microstructure showed a non-gelatinized, relatively homogeneous in size and shape sample with pretreatment soaked in distilled water at room temperature. These study results are relevant to the development of more sustainable cassava flour production.

A method for rapid and homogenous initiation of post-harvest physiological deterioration in cassava storage roots identifies Indonesian cultivars with improved shelf-life performance

Cassava is the most cultivated and consumed root crop in the world. One of the major constraints to the cassava value chain is the short shelf life of cassava storage roots which is primarily due to the so-called post-harvest physiological deterioration (PPD). The identification of natural sources of PPD tolerance represents a key approach to mitigating PPD losses by generating farmer- and industry-preferred cassava cultivars with prolonged shelf life. In the present study, a PPD assessment method was developed to screen for PPD tolerance in the cassava germplasm. The proposed PPD assessment method displayed a reduced rate of microbial infection and allowed a rapid and homogenous development of typical PPD symptoms in the cassava storage roots. We successfully used the PPD assessment method in combination with an image-based PPD scoring method to identify and characterize PPD tolerance in 28 cassava cultivars from the Indonesian cassava germplasm. Our analysis showed a significant and positive correlation between PPD score and dry matter content (r = 0.589-0.664, p-value < 0.001). Analysis of additional root parameters showed a significant and positive correlation between PPD scores at 2 days post-harvest (dph) and root length (r = 0.388, p-value < 0.05). Our analysis identified at least 4 cultivars displaying a significantly delayed onset of PPD symptoms as compared to the other selected cultivars. The availability of cassava cultivars contrasting for tolerance to PPD will be particularly instrumental to understanding the molecular mechanisms associated with delayed PPD in cassava roots.

Use of the abrasion technique in minimal processing as an alternative to increase purchase acceptability and minimize browning in yam

BACKGROUND

The present study investigated the sensory acceptance, oxidative damage and protection, and possible anatomical-structural damage of cells from the surface of shapes of minimally processed yam. The tubers were minimally processed into the peeled rondelle, dice and 'chateau cut' (chateau) shapes, the latter of which was obtained after performing the abrasion technique. Control treatment corresponded to the rondelle shape with the periderm. The pieces were kept packed at 5 ± 2 °C for 14 days.

RESULTS

Peeled rondelle and chateau were sensorially the most well-accepted yam shapes and achieved the highest purchase intention. The enzymes were partially modulated by the detected H₂ O₂ levels. Oxidative burst lasted longer in the minimally processed tissues than in the control. Polyphenol oxidase activity showed a clear difference in behavior between the minimally processed pieces and the control. Minimal processing induced transient increases in phenolic compounds, for which the expression was lowest in the abraded pieces. On the other hand, these pieces exhibited greater cell collapse on the surface of the amyliferous parenchyma.

CONCLUSION

Based on the results of the trained panel, the abrasion technique is an alternative to provide shapes that are better accepted and marketable, more resistant to browning, and can be stored for up to 12 days. Resistance to browning may be related to a more efficient modulation of enzymatic antioxidant systems and intense deposition of cell debris on the surface of the amyliferous parenchyma. © 2021 Society of Chemical Industry.

Effects of vacuum packaging storage of minimally processed cassava roots at various temperatures on microflora, tissue structure, starch extraction by wet milling and granule quality

BACKGROUND

Vacuum package storage is commonly applied to reduce postharvest deterioration in minimally processed cassava roots. However, the influence of vacuum packaging conditions on root end-use quality is poorly understood. Hence, the effects of vacuum packaged storage at ambient, refrigerated and freezing temperatures on microflora, cassava tissue structure and starch extraction by wet milling were studied.

RESULTS

Vacuum packaged storage temperature strongly affected cassava root quality. Minimal adverse effects were obtained with frozen storage. With refrigerated storage, there was negligible microbial growth but some disruption of the parenchyma cell wall structure suggestive of chilling injury. With ambient temperature storage, there was considerable Lactobacilli dominated fermentation. This caused substantial cell degradation, probably due to the production of extracellular cellulolytic and other cell wall degrading enzymes. A benefit of this cell wall breakdown was that it substantially improved starch extraction with wet milling from the stored cassava pieces; by 18% with pieces that had been ambient vacuum packaged and wet milled using a 2000 μm opening screen. However, ambient temperature storage resulted in some starch granule pitting due to the action of extracellular amylases from the fermenting microorganisms.

CONCLUSION

The best vacuum packaging storage conditions for minimally processed cassava depends on application and cost. For short-term storage, refrigeration would be best for vegetable-type products. For several months storage, freezing is best. For wet milling applications, this could be combined with subsequent short-term ambient temperature storage as it improves starch extraction efficiency and could reduce distribution energy costs. © 2021 Society of Chemical Industry.

Phosphate Fertilization as a Modulator of Enzymatic Browning in Minimally Processed Cassava

This study proposes to relate the increase in phosphorus (P) supply in the soil, via phosphate fertilization, to oxidative damage and protection, phenylpropanoid metabolism, and enzymatic browning in minimally processed cassava. The roots were grown with 0, 60, and 120 kg ha^-1 P₂O₅. The roots were harvested, and the yield and P content in the root, stem, and leaves were quantified. The roots were minimally processed and stored for 12 days at 5 °C. The higher supply of P in the soil increased the P content of roots and stems but not the agro-industrial yields. Roots grown at 120 kg ha^-1 P₂O₅ showed higher detection of hydrogen peroxide, which was accompanied by increased phenolic compounds, soluble quinones, and antioxidant capacity and increased activities of the enzymes superoxide dismutase, catalase, ascorbate peroxidase, polyphenol oxidase, and peroxidase. The present study thus demonstrates the role of phosphorus application, induction of the synthesis of phenolic compounds, and quality of fresh-cut cassava.

Interactive Effects of Chemical Pretreatment and Drying on the Physicochemical Properties of Cassava Flour Using Response Surface Methodology

Calcium chloride and citric acid (0.6-3.4%w/v) were separately applied in the pretreatment of two South African cassava landraces (white and red) processed into flour at drying temperatures of 45-74°C. Optimisation using the response surface methodology showed ash (0.79-4.42%) and crude fibre (2.77-5.12%) increased as the drying temperature (DT) and concentration of pretreatment (COP) increased. Starch content (78.06-84.71%) was not influenced by the processing variables. Both pretreatments improved the lightness and whiteness index of cassava flour. Optimal processing conditions of 70°C DT and 3%w/v COP were the same for the proximate composition of cassava flour from all experimental groups.