Adsorption Isotherms of Maria Biscuits from Different Brands

Properties, Structure, and Acceptability of Innovative Legume-Based Biscuits with Alternative Sweeteners

The effects of legume incorporation and sweetener substitution on the quality characteristics of innovative biscuits were investigated. The wheat flour was substituted with chickpea and lentil flour at ratios ranging from 0 to 30% legume to whole-meal dicoccum wheat flour. The sugar was substituted by oligofructose at 50 and 100% levels. The quality characteristics, including physicochemical properties (moisture content, water activity, and color), sorption characteristics, structural and textural properties, and sensory properties, were significantly affected by the substitutions. Sorption phenomena were excellently described by the Guggenheim, Anderson, and de Boer (GAB) model, while its parameters were affected by substitutions. Scanning electron microscopy revealed a porous structure with starch granules embedded within the protein matrix, showing restricted gelatinization and keeping largely their form. The incorporation of legume flour increased the biscuit density, hardness, and spread ratio and decreased the color of the products. Furthermore, principal component analysis (PCA) analysis of instrumental and sensory characteristics showed that texture and sweetness were the key quality characteristics for product acceptance. It was found that highly acceptable legume-based biscuits with alternative sweeteners can be produced, with 50% oligofructose substitution and legume flour incorporation (chickpea or lentil) up to 30%.

A High-Efficiency Radio-Frequency-Assisted Hot-Air Drying Method for the Production of Restructured Bitter Melon and Apple Chips

Nowadays, consumers are increasingly demanding processed food products with high levels of beneficial components. Bitter melon and apple are both nutritious foods rich in bioactive compounds. In this study, restructured bitter melon and apple chips were processed using four drying techniques: hot-air drying with/without exhaust air recirculation (EAR), and radio-frequency-assisted hot-air drying (RFHAD) with/without EAR. The drying characteristics, effective moisture diffusivity (Deff), specific energy consumption (SEC), total energy consumption (TEC), and some selected quality characteristics of the dehydrated chips were evaluated. The experimental results show that the application of radio frequency (RF) energy significantly facilitates water evaporation in the drying material, resulting in a significant (p < 0.05) reduction of drying duration by 31~39% over the experimental test parameters. The higher Deff values obtained from RFHAD and RFHAD + EAR were 6.062 × 10-9 to 6.889 × 10-9 m2/s, while lower SEC values ranged from 301.57 to 328.79 kW·h/kg. Furthermore, the dried products possessed better or fairly good quality (such as a lower color difference of 5.41~6.52, a lower shrinkage ratio of 18.24~19.13%, better antioxidant capacity, higher chlorophyll, total flavonoid, and total phenolic content, a lower polyphenol oxidase activity of 49.82~52.04 U·min-1g-1, smaller diameter and thickness changes, and a lower hardness of 27.75~30.48 N) compared to those of hot-air-dried chips. The combination of RF-assisted air drying and partial recirculating of dryer exhaust air achieved the highest saving in TEC of about 12.4%, along with a lower moisture absorption capacity and no deterioration of product quality attributes. This drying concept is therefore recommended for the industrial drying of several food materials.

Assessment of Textural Properties of Puffed Corn Cakes during Storage at Different Relative Humidity

Moisture adsorption is considered a critical factor during production and shelf-life of puffed corn cakes (PCC). This study aims to develop and validate an instrumental method and a mathematical model for the characterization of the textural modifications caused by the moisture adsorption in PCC. For that purpose, PCC were stored at different relative humidities to achieve a wide range of water activities (from 0.1 to 0.8 at 22 ± 1 °C). A flexion-compression test was successfully validated in order to characterize the average textural properties of a PCC batch. A mathematical model considering consecutive elastic and plastic zones satisfactorily fitted (average VAR 99.65% and MRE 3.29%) the average stress-strain profiles of PCC and reported useful textural parameters, such as the deformability modulus (E), critical strain (ε_c), and n curvature parameter. The structural modifications caused by moisture adsorption led to the reduction in E and n and the increase in ε_c. Even minor changes on the PCC moisture content involve remarkable modifications of the textural properties, which has to be considered for industry and retail distribution.

Moisture adsorption behaviour of biscuit during storage investigated by using a new Dynamic Dewpoint method

The changes in moisture adsorption isotherms of commercial biscuits during storage were investigated by means of a rapid Dynamic Dewpoint Isotherms (DDIs) method. Moreover, the relationships between the changes in moisture content and some quality characteristics of biscuits (moisture, aw, peroxide value - PV and texture) were studied during 92 days of storage at 35 °C. GAB model was used to fit the experimental sorption behaviours. During storage, moisture content and aw of biscuits increased and the obtained isotherms showed modifications in behaviour and shape. Significant changes were observed in PV values and texture, particularly during the first 40 days of storage. The monolayer moisture content, obtained by the BET equation, significantly increased during storage from 1.473 to 2.080 g water 100 g db(-1), probably because of the increase in the active sites for water binding due to the chemical and physical changes of the main components, induced by product ageing.