Identification of Cardamom Encapsulated Alginate-Whey Protein Concentrates Microcapsule Release Kinetics and Mechanism during Storage, Stew Process and Oral Consumption

Multi-agent simulation of doughnut deep fat frying considering two domain heating media and sample flipping

Two domain heating media and sample flipping during processing were considered when developing an agent-based model to explain coupled heat and mass transfer phenomena during deep fat frying of doughnuts. The model was validated by comparing the moisture content, oil content and temperature profiles obtained from the experimental results with those obtained from the model. Results of this study showed that the water content of crumb raised to 60% (based on dry weight) whereas, it decreased to less than 10% in the case of doughnut crust during deep fat frying. Simulated profile of oil penetration illustrated that the oil content of different parts of crust were not equal and were affected by frying temperature and crust structure. In general, as the surface of doughnut (a porous material) was heated from the surface, evaporation zones were formed in the thinner parts of the crust and gradually formed oil penetrating areas. Moreover, experimental and simulated data indicated that flipping of samples in the middle of processing time had an important effect on heat and mass transfer during frying. Variation of thermophysical properties in each part of doughnut had a unique behavior. The changes in the density, specific heat capacity and thermal conductivity of crumb followed a sigmoid pattern; whereas, a dominant falling rate period with some variations was observed in crust. Moreover, any changes in moisture content and temperature of crust occurred faster than the crumb. The output of simulation was in a good agreement with the experimental data. With the power of simulation now available for design, the results of this study greatly improve the design of fried foods and frying processes.

Recent advances in the extraction, chemical composition, therapeutic potential, and delivery of cardamom phytochemicals

Dietary phytochemicals including plant-derived alkaloids, carotenoids, organosulfur compounds, phenolics, and phytosterols, are health-promoting bioactive compounds that help in the prevention and mitigation of chronic diseases and microbial infections beyond basic nutrition supply. This article covers recent advances in the extraction, chemical composition, therapeutic potential (nutraceutical and antimicrobial), and delivery of black and green cardamom-derived phytochemicals. In recent years, advance extraction techniques (e.g., enzyme- assisted-, instant controlled pressure drop-, microwave- assisted-, pressurized liquid-, sub- critical-, supercritical fluid-, and ultrasound-assisted extractions) have been applied to obtain phytochemicals from cardamom. The bioactive constituents identification techniques, specifically GC-MS analysis revealed that 1,8-cineole and α-terpinyl acetate were the principle bioactive components in black and green cardamom. Regarding therapeutic potential, research findings have indicated desirable health properties of cardamom phytochemicals, including antioxidant-, anti-hypercholesterolemic, anti-platelet aggregation, anti-hypertensive, and gastro-protective effects. Moreover, antimicrobial investigations revealed that cardamom phytochemicals effectively inhibited growth of pathogenic microorganisms (bacteria and fungi), biofilm formation inhibition (Gram-negative and Gram-positive bacteria) and bacterial quorum sensing inhibition. Encapsulation and delivery vehicles, including microcapsules, nanoparticles, nanostructured lipid carriers, and nanoliposomes were effective strategies to enhance their stability, bioavailability and bioefficacy. In conclusion, cardamom phytochemicals had promising therapeutic potentials (antioxidant and antimicrobial) due to polyphenols, thus could be used as functional additive to increase shelf life, inhibit oxidative rancidity and confer pleasant aroma to commercial edibles as well as mitigate oxidative stress and lifestyle related chronic diseases (e.g., cardiovascular and gastrointestinal diseases). A future perspective concerning the fabrication of functional foods, nutraceuticals and antibiotics to promote cardamom phytochemicals applications as biotherapeutic agents at large-scale requires thorough investigations, e.g., optimum dose and physical form of supplementation to obtain maximum health benefits.

Application of cellulose plate modified with encapsulated Cinnamomum zelanicum essential oil in active packaging of walnut kernel

In this study, Cinnamomum zelanicum essential oil was encapsulated with β-cyclodextrin and sodium caseinate (EO/BCD/Ca) and nanoemulsion was optained. In order to encapsulation of essential oil, different formulations of nanoemulsions containing essential oil were produced by ultrasound method and the effect of different polymers on the particle size and turbidity of the nanoemulsion was investigated. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) techniques were used to study the structure and morphology of the produced nanoemulsions. Cinnamomum zelanicum essential oil encapsulated with β-cyclodextrin and sodium caseinate was used to modify porous cellulose plates (Cel/EO/BCD/Ca). Cellulose/encapsulated essential oil plates were used to package the walnut kernel to control oxidative changes during storage. The effect of packaging type (under vacuum and ordinal), plate type and storage time on quality control of walnut kernel and oil extracted from walnut kernel was investigated. The results showed that the particle size of essential oil, essential oil/β-cyclodextrin and essential oil/β-cyclodextrin/sodium caseinate were in the range of 84-85, 713-713 and 237-234 (nm), respectively. The encapsulation efficiency of both formulations was above 70%. Zeta potential was negative for essential oil/β-cyclodextrin/sodium caseinate samples and free essential oil samples. The effect of different polymers on the turbidity of emulsions was significant. The results of sensory evaluation of walnut kernel showed that the use of encapsulated essential oil compared to free essential oil caused the protection of color, taste and other quality characteristics during storage. Also, the essential oil encapsulated with β-cyclodextrin/sodium caseinate had a greater effect on quality control of walnut kernel and its oil than the essential oil encapsulated with β-cyclodextrin. Also, the quality characteristics of walnut kernels and walnut kernel oil packed in vacuum conditions were better than walnut kernels and walnut kernel oil packed in non-vacuum conditions during storage.

Experimental aspects of NPY-decorated gold nanoclusters using randomized hybrid design against breast cancer cell line

Gold nanoclusters (AuNCs) are potential carrier system for bioactive like proteins and peptides used in various therapeutics against various ailments. Neuropeptide Y (NPY) is consists of 36 amino acids used to treat depression, obesity, epilepsy, and so on. but possess instability at higher temperatures causing its limited usage. The present study focused on the NPY-decorated AuNCs prepared using desolvation reduction technique and optimized through randomized hybrid design. ATR-FTIR, ¹ H NMR and CD spectroscopic studies confirmed the AuNCs structure interaction with NPY. The optimized NPY-decorated AuNCs possessed 85.6 ± 2.08% of entrapment efficiency with 85.32 ± 7.55% of NPY release for 24 h. It displayed dose-dependent cell cytotoxicity, IC₅₀ value of 0.7 ± 0.05 μg mL^-1 and apoptosis of 68.48 ± 7.35% with controlled cell migration causing G0G1 cell arrest by penetrating cancer cell membrane on MCF-7 cell line. Furthermore, the AuNCs caused surface disruption of the cancerous cell further interrupting the protein synthesis by MAPK pathway leading to cell death. The AuNCs were stable for 3 months at 25 ± 2°C due to steric hindrance. Hence, NPY-decorated AuNCs were found to be effective on MCF-7 cell line with a significant anti-apoptotic effect, further emerging as a novel therapeutic delivery system in the management of breast cancer.

An innovative model for describing oil penetration into the doughnut crust during hot air frying

Hot air frying is one of the newest processing methods that can make healthier fried foods. The mechanism of frying using this method is not understood entirely yet. There is no model available to describe the oil absorption for air-fried foods. In this research, an agent-based model was extended to describe the oil penetration procedure and study the different effects of the cellular structure of crust on oil distribution during hot air frying. Netlogo software was used for the model simulation. The simulation results of oil penetration were in good agreement with experimental data. Obtained results show that the oil penetration procedure divided into three main steps named latent phase, acceleration phase, and deceleration phase. The acceleration phase is the most critical step in doughnut oil absorption. Simulated data also show that oil penetration starts from the thinner parts of the crust. Therefore, it seems that the structure of the crust has an important effect on oil absorption pattern.

Modeling the release of food bioactive ingredients from carriers/nanocarriers by the empirical, semiempirical, and mechanistic models

The encapsulation process has been utilized in the field of food technology to enhance the technofunctional properties of food products and the delivery of nutraceutical ingredients via food into the human body. The latter application is very similar to drug delivery systems. The inherent sophisticated nature of release mechanisms requires the utilization of mathematical equations and statistics to predict the release behavior during the time. The science of mathematical modeling of controlled release has gained a tremendous advancement in drug delivery in recent years. Many of these modeling methods could be transferred to food. In order to develop and design enhanced food controlled/targeted bioactive release systems, understanding of the underlying physiological and chemical processes, mechanisms, and principles of release and applying the knowledge gained in the pharmaceutical field to food products is a big challenge. Ideally, by using an appropriate mathematical model, the formulation parameters could be predicted to achieve a specific release behavior. So, designing new products could be optimized. Many papers are dealing with encapsulation approaches and evaluation of the impact of process and the utilized system on release characteristics of encapsulated food bioactives, but still, there is no deep insight into the mathematical release modeling of encapsulated food materials. In this study, information gained from the pharmaceutical field is collected and discussed to investigate the probable application in the food industry.

Electrospun chia seed mucilage/PVA encapsulated with green cardamonmum essential oils: Antioxidant and antibacterial property

In this work, the potential of chia seed mucilage (CSM) as a new source of carbohydrate for encapsulation of green cardamonmum Essential oils (GCEOs) was evaluated. ¹H NMR spectrum, FTIR spectrum and, SEM image has confirmed the existence of the GCEOs in the nanofibers. The nanofibers of CSM and polyvinyl alcohol have not antibacterial property, while nanofibers containing GCEOs show antibacterial activity against E. coli and S. aureus. Incorporating GCEOs in CSM nanofibers improved the antioxidant of the generated nanofibers. The amount of radical scavenging for the nanofibers containing 16 (mg/ml) of GCEOs was 18% and increasing the GCEOs concentration up to 64 (mg/ml) leads to grow the activity up to 41%. Thus, our studies indicate that nanofiber can be used as a novel antioxidant and antibacterial agent in the food and pharmaceutical industry.

A Novel Shell Material-Highland Barley Starch for Microencapsulation of Cinnamon Essential Oil with Different Preparation Methods

Highland barley starch (HBS), as a carbohydrate shell material with excellent performance in microcapsule applications, has rarely been reported. In the present study, three different microcapsules (CEO-SWSM, CEO-PM, and CEO-UM) were synthesized successfully via saturated aqueous solution method, molecular inclusion method and ultrasonic method, respectively, using HBS as shell material coupled with cinnamon essential oil (CEO) as the core material. The potential of HBS as a new shell material and the influence of synthetic methods on the performance of microcapsules, encapsulation efficiency (EE), yield, and release rate of CEO-SWSM, CEO-PM, and CEO-UM were determined, respectively. The results confirmed that CEO-PM had the most excellent EE (88.2%), yield (79.1%), as well as lowest release rate (11.5%, after 25 days of storage). Moreover, different kinetic models were applied to fit the release process of these three kinds of microcapsules: CEO-SWSM, CEO-PM, and CEO-UM had the uppermost R-squared value in the Higuchi model, the zero-order model, and the first-level model, respectively. Over all, this work put forward a novel perspective for the improved encapsulation effect of perishable core materials (e.g., essential oil) for the food industry.

High correlation between octanol-air partition coefficient and aroma release rate from O/W emulsions under non-equilibrium

Aroma release kinetics determines the palatability of food consumed by humans. Therefore, to estimate release behaviors of aroma compounds is important. We investigated the relationship between the rates of the release of aroma compounds from food matrices and octanol-water, octanol-air, and water-air partition coefficients. The aroma compounds used were limonene, ethyl hexanoate, 2-methylpyrazine, nonanal, benzaldehyde, ethyl benzoate, α-terpineol, geraniol, benzyl alcohol, and octanoic acid. The rates of their release from oil-in-water (O/W) emulsions were measured under non-equilibrium conditions using a purge-and-trap dynamic headspace extraction system. The results indicated that the octanol-air partition coefficients correlated better with the logarithms of the aroma compound release rates than either the octanol-water or the water-air partition coefficients. Furthermore, this correlation was independent of the oil volume ratios in the O/W emulsions. Our findings therefore suggest that octanol-air partition coefficients can be used to predict the release rates of aroma compounds from O/W emulsions.