Evaluation of Organic Acids and Ultrasound as Pretreatment in Convective Drying Kinetics and Quality Parameters of Pumpkin

There is a growing interest in the food industry in new drying technologies that reduce the time required for dehydration, combined with low energy consumption, low environmental impact, and maintenance of the overall quality of the product. This work investigated convective drying of pumpkin with and without ultrasound-organic (citric or acetic) acid pretreatment for different durations (10, 20, and 30 min). Drying was carried out at 60 °C, and the Wang and Singh model had the best fit for the experimental data. Samples pretreated for 30 min had the shortest drying times. Water diffusivities ranged from 6.68 × 10-8 m2/s to 7.31 × 10-8 m2/s, with the pretreated samples presenting the highest values. The dried pumpkin water activity values were below 0.60. Regarding color parameters, there was a slight increase in luminosity, a slight reduction in a*, and a significant increase in b*. Drying resulted in the loss of ascorbic acid and phenolic compounds, but the samples pretreated with citric acid showed better retention. There was also a reduction in the total carotenoid content, but samples pretreated with acetic acid for 10 and 20 min showed the best retention.

Optimization of Convective Tray-Drying Process Parameters for Green Banana Slices Using Response Surface Methodology and Its Characterization

Green banana (Musa spp.) is a significant source of starch (resistant starch ∼50%), phenolics and flavonoid compounds, and minerals (K, Mg, Zn, and Fe). The utilization of green bananas in their fresh form is limited, whereas the drying of bananas provides the opportunity to use them for various purposes. Drying temperature and slice thickness are important to be optimized for drying of bananas as they affect the quality parameters. The present study was conducted using response surface methodology to optimize tray-drying temperatures (50–80°C) and slice thicknesses (2–8 mm) on the basis of phytochemical and physical parameters of dried green banana slices. The cubic model was found to be the best fit for most of the responses (R2 = 0.95–1), and the quadratic model was fit for water activity ( ${\mathrm{a}}_{\mathrm{w}}$ ) (R2 = 0.92). The optimized drying conditions were found as drying temperature of 50°C and slice thickness of 4.5 mm. Experimental responses exhibited maximum L ${}^{\ast }$ (84.06), C ${}^{\ast }$ (13.73), and ho(83.53) and minimum losses of total phenolic content (89.22 mg GAE/100 g) and total flavonoid content (3.10 mg QE/100 g) along with lower ${\mathrm{a}}_{\mathrm{w}}$ (0.25). The optimized green banana flour was rich in carbohydrates (77.25 ± 0.06%) and low in fat (1.79 ± 0.11%). The flour obtained had good flowability with a mean particle size of 60.75 ± 1.99 µm. Flour’s gelatinization and decomposition temperatures were 102.7 and 292°C, respectively. In addition, flour’s water absorption, oil absorption, and solubility were 5.19 ± 0.01, 1.58 ± 0.01, and 0.14 ± 0.02 g/g, respectively. Green bananas dried at optimized conditions resulted in a better product with less phytochemical loss than dried with other methods.

Impact of ultrasonication applications on color profile of foods

Food color is a feature that provides preliminary information about their preference or consumption. There are dominant pigments that determine the color of each food; the most important pigments are anthocyanins (red-purple color), chlorophylls (green color), carotenoids (yellow-orange color), and betalains (red color). These pigments can be easily affected by temperature, light, oxygen, or pH, thereby altering their properties. Therefore, while processing, it is necessary to prevent the deterioration of these pigments to the maximum possible extent. Ultrasonication, which is one of the emerging non-thermal methods, has multidimensional applications in the food industry. The present review collates information on various aspects of ultrasonication technology, its mechanism of action, influencing factors, and the competence of different ultrasonication applications (drying, irradiation, extraction, pasteurization, cooking, tempering, etc.) in preserving the color of food. It was concluded that ultrasonication treatments provide low-temperature processing at a short time, which positively influences the color properties. However, selecting optimum ultrasonic processing conditions (frequency, power, time, etc.) is crucial for each food to obtain the best color. The key challenges and limitations of the technique and possible future applications are also covered in the paper, serving as a touchstone for further research in this area.