The Conometric Concept: Definitive Fixed Lithium Disilicate Restorations Supported by Conical Abutments

Conometric Connection for Implant-Supported Crowns: A Prospective Clinical Cohort Study

BACKGROUND

Traditional screw or cemented connections in dental implants present limitations, prompting the exploration of alternative methods. This study assesses the clinical outcomes of single crowns and fixed partial prostheses supported by conometric connections after one year of follow-up.

METHODS

Twenty-two patients received 70 implants, supporting 33 rehabilitations. Biological responses and prosthodontic complications were evaluated at baseline, 6 months, and 12 months.

RESULTS

All implants exhibited successful osseointegration, with no losses or peri-implant inflammation. Marginal bone levels showed minimal changes, well below pathological thresholds. The difference in marginal bone loss (MBL) was -0.27 ± 0.79 mm between T0 and T1, and -0.51 ± 0.93 mm between T0 and T2. No abutment screw loosening or crown chipping occurred. However, coupling stability loss was observed in nine cases.

CONCLUSIONS

The conometric connection demonstrated successful integration and minimal complications after one year. This alternative shows promise, particularly in simplifying handling and improving marginal adaptation. Further research with larger sample sizes and longer follow-up is warranted for comprehensive validation.

Systematic review evaluating the influence of the prosthetic material and prosthetic design on the clinical outcomes of implant-supported multi-unit fixed dental prosthesis in the posterior area

OBJECTIVE

The objectives of the study were to assess the survival, failure, and technical complication rates of implant-supported fixed dental prosthesis (iFDPs) with pontic or splinted crown (iSp C) designs in the posterior area and compare the influence of prosthetic materials and prosthetic design on the outcomes.

METHODS

Electronic and manual searches were performed to identify randomized-, prospective-, and retrospective clinical trials with follow-up time of ≥12 months, evaluating the clinical outcomes of posterior iFDPs with pontic or iSp Cs. Survival and complication rates were analyzed using robust Poisson's regression models.

RESULTS

Thirty-two studies reporting on 42 study arms were included in the present systematic review. The meta-analysis of the included studies indicated estimated 3-year survival rates of 98.3% (95%CI: 95.6-99.3%) for porcelain-fused-to-metal (PFM) iFDPs, 97.5% (95%CI: 95.5-98.7%) for veneered zirconia (Zr) iFDPs with pontic, 98.9% (95%CI: 96.8-99.6%) for monolithic or micro-veneered zirconia iFDPs with pontic, and 97.0% (95%CI: 84.8-99.9%) for lithium disilicate iFDPs with pontics. The survival rates for different material combination showed no statistically significant differences. Veneered restorations, overall, showed significantly (p < .01) higher ceramic fracture and chipping rates compared with monolithic restorations. Furthermore, there was no significant difference in survival rates (98.3% [95%CI: 95.6-99.3%] vs. 99.1% [95%CI: 97.6-99.7%]) and overall complication rates between PFM iFDPs with pontic and PFM iSp Cs.

CONCLUSIONS

Based on the data identified by this systematic review, PFM, veneered Zr, and monolithic Zr iFDPs with pontic and iSp Cs showed similarly high short-term survival rates in the posterior area. Veneered restorations exhibit ceramic chipping more often than monolithic restorations, with the highest fracture rate reported for veneered Zr iFDPs.

The Conometric Connection for the Implant-Supported Fixed Prosthesis: A Narrative Review

Aim: The conometric concept was proposed as a possible connection between the abutment and the prosthetic coping. This research aimed to review the features and possible clinical uses of this connection in an implant-supported fixed prosthesis. Methods: An electronic search was conducted on an online database for the topic in object; articles published in international literature were considered and the research gave 17 results, and 6 parameters were analyzed. Results: This connection eliminated the possibility of cement residues in the subgingival region, reducing the risk of inflammation of peri-implant soft and hard tissues; not having to remove the cement residues, it is possible to place the margins in more apical portions, improving the aesthetics outcomes of the rehabilitations. It is also known that the retention by means of a screw causes a weakening of the restoration. The retentive force is adequate for fixed rehabilitation even after a high number of insertion–disengagement cycles; in vitro studies have also shown a high bacterial sealing. Implant rehabilitation using preformed components, such as conometric hoods, is helpful for CAD/CAM, so a digital workflow is possible. Several types of prosthesis were presented, all of which demonstrated adequate clinical performance in the follow-up observation. Conclusions: This type of connection seems to be suitable to support fixed implant rehabilitations, but long-term clinical studies are needed to validate this system.

Evaluation of clinical and radiographic outcome of friction fit conical abutment system in implant-supported dental prostheses: An in vivo study

Aim

The purpose of this clinical study was to analyze the clinical feasibility of friction fit conical abutment system in implant-supported fixed dental prostheses as an alternative to cement and screw retention.

Settings and Design

This was an in vivo longitudinal study.

Materials and Methods

A total of 10 prostheses were designed as 3- or 4-unit fixed dental prostheses supported by two implants. All the subjects selected were evaluated for pocket probing depth (PPD) and marginal bone loss at the time of implant placement (T1), at the time of placement of friction fit prostheses (T2), and 12 months after placement of friction fit prostheses (T3). Marginal bone loss at T2 and T3 was measured with respect to bone levels at T1 and T2, respectively. The patient satisfaction was assessed at T2 and T3 using FDI clinical criteria and scoring system (modified by Monaco et al.).

Statistical Analysis Used

Shapiro-Wilk test was employed to test the normality of data. Paired sample t-test was performed for quantitative variables.

Results

A total of twenty implants were inserted in ten partially edentulous spaces; the average patient age was 50.2 years. No significant difference was seen between T2 and T3 for PPD. Comparison of marginal bone loss using paired t-test showed a statistically highly significant difference at T2 and T3 with higher value at T2. No prostheses were dislodged during postprosthetic follow-up. The survival rate was 100% for both the abutments and implants. No change in surface luster was observed 12 months following prosthetic rehabilitation in any case. No prostheses or framework fracture was reported and all patients were satisfied with the prosthesis received.

Conclusions

Friction fit conical abutment system can act as a novel approach for the retention of implant-supported fixed dental prostheses.

Bacterial translocation and microgap formation at a novel conical indexed implant abutment system for single crowns

OBJECTIVES

A conometric concept was recently introduced in which conical implant abutments hold the matching crown copings by friction alone, eliminating the need for cement or screws. The aim of this in vitro study was to assess the presence of microgap formation and bacterial leakage at the Acuris conometric restorative interface of three different implant abutment systems.

MATERIAL AND METHODS

A total of 75 Acuris samples of three implant-abutment systems (Ankylos, Astra Tech EV, Xive) were subjected to microbiological (n = 60) and scanning electron microscopic (SEM) investigation (n = 15). Bacterial migration into and out of the conical coupling system were analyzed in an anaerobic workstation for 48, 96, 144, and 192 h. Bacterial DNA quantification using qrt-PCR was performed at each time point. The precision of the conometric coupling and internal fit of cemented CAD/CAM crowns on corresponding Acuris TiN copings were determined by means of SEM.

RESULTS

qrt-PCR results failed to demonstrate microbial leakage from or into the Acuris system. SEM analysis revealed minute punctate microgaps at the apical aspect of the conometric junction (2.04 to 2.64 µm), while mean cement gaps of 12 to 145 µm were observed at the crown-coping interface.

CONCLUSIONS

The prosthetic morse taper connection of all systems examined does not allow bacterial passage. Marginal integrity and internal luting gap between the ceramic crown and the coping remained within the clinically acceptable limits.

CLINICAL RELEVANCE

Conometrically seated single crowns provide sufficient sealing efficiency, relocating potential misfits from the crown-abutment interface to the crown-coping interface.

Marginal Adaptation and Microbial Leakage at Conometric Prosthetic Connections for Implant-Supported Single Crowns: An In Vitro Investigation

Encouraging clinical results were reported on a novel cone-in-cone coupling for the fixation of dental implant-supported crowns (Acuris, Dentsply Sirona Implants, Mölndal, Sweden). However, the presence or absence of a microgap and a potential bacterial leakage at the conometric joint has not yet been investigated. A misfit and a resulting gap between the conometric components could potentially serve as a bacterial reservoir that promotes plaque formation, which in turn may lead to inflammation of the peri-implant tissues. Thus, a two-fold study set-up was designed in order to evaluate the bidirectional translocation of bacteria along conometrically seated single crowns. On conometric abutments filled with a culture suspension of anaerobic bacteria, the corresponding titanium nitride-coated (TiN) caps were fixed by friction. Each system was sterilized and immersed in culture medium to provide an optimal environment for microbial growth. Positive and negative controls were prepared. Specimens were stored in an anaerobic workstation, and total and viable bacterial counts were determined. Every 48 h, samples were taken from the reaction tubes to inoculate blood agar plates and to isolate bacterial DNA for quantification using qrt-PCR. In addition, one Acuris test system was subjected to scanning electron microscopy (SEM) to evaluate the precision of fit of the conometric coupling and marginal crown opening. Throughout the observational period of one week, blood agar plates of the specimens showed no viable bacterial growth. qrt-PCR, likewise, yielded a result approaching zero with an amount of about 0.53 × 10⁻⁴ µg/mL DNA. While the luting gap/marginal opening between the TiN-cap and the ceramic crown was within the clinically acceptable range, the SEM analysis failed to identify a measurable microgap at the cone-in-cone junction. Within the limits of the in-vitro study it can be concluded that the Acuris conometric interface does not allow for bacterial translocation under non-dynamic loading conditions.

The conometric concept for the definitive rehabilitation of a single posterior implant by using a conical indexed abutment: A technique

This report describes the restoration of the healed single implant in the posterior region by using a lithium disilicate crown supported by an Acuris abutment. The restored implants were placed in the premolar and molar region of both the mandible and the maxilla by using a 1-stage approach. The definitive Acuris abutment was placed after an implant healing period of at least 3 months. Definitive impressions were made at least 3 months after surgery. The precrystallized lithium disilicate crown was adapted to a laboratory abutment and evaluated. The crown was then crystallized, finished, colored, and cemented to the definitive abutment by using an adhesive resin cement. The definitive restoration engaged the abutment without the use of screws or cement. A single healed implant can be successfully restored by using a lithium disilicate restoration supported by an Acuris abutment.

Influence of margin location and luting material on the amount of undetected cement excess on CAD/CAM implant abutments and cement-retained zirconia crowns: an in-vitro study

Background

The flexibility in designing the submucosal part of CAD/CAM customized implant abutments and the individual positioning of its shoulder line has been suggested to reduce the risk of leaving undetected cement residues, thus preventing adverse effects on peri-implant tissues. A high correlation between excess cement left in the soft tissues and the occurrence of increased biofilm accumulation with sulcular bleeding and/ or suppuration has been reported. This in turn may cause peri-implant inflammation and peri-implant marginal bone loss. The aim of this study was to assess the frequency of cement remnants after the luting of zirconia crowns on CAD/CAM custom molar abutments with different margin levels and to evaluate the impact of the luting material.

Material and methods

A total of 20 titanium molar CAD/CAM implant abutments (BEGO Medical GmbH) with internal taper connection/ internal hex anti-rotation protection, and a convex emergence profile with different margin positions (0, 1, 2 and 3 mm below the mucosa), were virtually designed (Implant Studio, 3Shape) and manufactured. A master cast was scanned, duplicated by a 3D printer and individual gingival masks were produced to simulate peri-implant soft tissues. 20 corresponding zirconia crowns were designed (Cerec 3D, Dentsply Sirona), produced and cemented to the abutments with two different luting materials; a zinc oxide non-eugenol cement (Temp Bond NE) or a methacrylate cement (Panavia V5). To ensure retrievability of the crown/abutment connection, occlusal openings providing access to the abutment screws were designed. Excess cement was thoroughly removed and the crown/abutment units were unscrewed to evaluate the occurrence of cement residues. All the quadrants of each specimen were evaluated for calculation of the ratio between the cement remnant area and the total specimen area using Adobe Photoshop. Spearman analysis was performed to detect correlations between different variables. A two-sided t-test, ANOVA, Mann–Whitney, and Kruskal–Wallis tests were applied to detect differences between the groups.

Results

Cement remnants were found in every depth of the crown abutment complex and in almost every area investigated. The amount of cement residues increased as the crown-abutment margin was located more submucosally. Lingual areas were more prone to cement remnants than other surface areas (p = 0.0291). Excess cement was not only found at the margins of the crown-abutment complex, but also underneath (basal) the abutment itself, where cleaning was impossible. No statistical difference in the effect of zinc oxide non-eugenol- and methacrylate cement on the frequency of excess material at the lateral abutment surfaces could be demonstrated in vitro. The proportion of basal abutment aspects covered with cement residues was, however, significantly smaller in Panavia V5 samples with an average of 4.9 ± 3.7% compared to Temp Bond samples with an average of 8.6 ± 5.5%.

Conclusions

Given the results obtained in the present investigation the margin of CAD/CAM molar abutments should be located as coronally as possible to minimize the amount of cement remnants. If an epigingival or supragingival margin location is not feasible due to esthetic concerns, it cannot be recommended to place the margin of molar CAD/CAM abutments deeper than 1.5 mm in the proximal and oral regions.

Guided-welded approach planning using a computer-aided designed prosthetic shell for immediately loaded complete-arch rehabilitations supported by conometric abutments

In guided surgery, implants can be planned from radiographic guide information according to a restoratively driven treatment plan. Unfortunately, the palatal or lingual surface of teeth cannot be easily identified. The present article describes the use of a digitally designed prosthetic shell to improve the accuracy of guided-welded approach planning for immediate restorations supported by conometric abutments. Importing the virtual shell into the planning software provides an effective protocol for using the definitive prosthetic space information to plan the framework shape and position predictably. This method increases the accuracy of virtual planning and reduces the time needed to reline the prosthetic shell.

The Conometric Concept: A Two-Year Follow-Up of Fixed Partial CEREC Restorations Supported By Cone-In-Cone Abutments

PURPOSE

To evaluate the performance of definitive, implant-supported, lithium disilicate fixed dental prostheses (LS₂ FDPs) manufactured with a computer-assisted design/computer-assisted manufacturing (CAD/CAM) system. All patients received two-unit restorations placed in posterior regions, supported by osseointegrated implants with cone-in-cone connection abutments.

MATERIALS AND METHODS

Two implants (Ankylos) were placed into healed sites or fresh extraction sockets in the maxillary/mandibular posterior regions of partially edentulous patients. Definitive digital impressions were made 3 months after surgery. Twenty-four patients received fixed  monolithic LS₂ restorations manufactured with the CEREC system. All restorations were connected to the implants using cone-in-cone connection abutments. Peri-implant pocket depths were recorded for 2 years at each follow-up visit. Esthetic, functional, and biologic United States Public Health Services (USPHS) parameters modified by the FDI World Dental Federation study design were assessed yearly until the last follow-up appointment. The opposing dentitions were identified by type of restoration and supporting structures at the time of placement of the definitive restorations and at the 2-year follow-up visits.

RESULTS

One patient (4.16%) moved to an unknown location during the study. A total of 23 FDPs (95.8%) supported by 46 implants reached the 2-year follow-up. None of the prostheses failed, or became loose or detached. No significant difference involving probing levels between the experimental times were found.

CONCLUSIONS

The results of this research indicated that the abutment-prostheses connection using a cone-in-cone approach was successful within the 2-year period of this study. None of the studied monolithic LS₂ glass-ceramic prostheses milled using the CEREC CAD/CAM system fractured or became detached.