Ridge augmentation using recombinant human fibroblast growth factor-2 with biodegradable gelatin sponges incorporating β-tricalcium phosphate: a preclinical study in dogs

Combination of bone substitutes and vectors in periodontology and implantology: A systematic review

The aim of the systematic review was to analyze the use of combination of bone substitutes and vectors in periodontology and implantology among animals models and humans. Electronic databases were searched, and additional hand search was performed. The research strategy was achieved according to the PRISMA guidelines. The including criteria were: combination of bone substitutes and vectors, in vivo studies, a precise number of specimens, histological and radiographic analysis, written in English. The risk of bias was evaluated for individual studies. Thirty-two articles were selected and investigated in this systematic review. The results do not show a superiority of the use of composite biomaterial in comparison with simple biomaterial but suggest the efficacity of their utilization as a carrier of bioactive agents. Future studies need to identify the suitable association of bone substitutes and vectors and explore interest in their use such as the support of growth factors.

Efficacy of recombinant human fibroblast growth factor 2 impregnated absorbable collagen membrane in the treatment of Miller's Class I and II gingival recession defects Preliminary results from the first in human clinical trial

Aims:

This study was a single-arm trial to obtain preliminary data on the efficacy of collagen membranes impregnated with recombinant human fibroblast growth factor-2 (rhFGF-2) in the treatment of Miller's Class I and II gingival recessions.

Materials and Methods:

Twenty-one individuals (34 sites) presenting with localized Miller's Class I and II gingival recessions were included in this study. Following a standard surgical protocol, rhFGF-2-impregnated membranes were placed in sites with gingival recession. Clinical parameters such as width of keratinized gingiva (wKG), recession depth (RD), and probing depth were measured at baseline and after therapy completion at 3 and 6 months.

Results:

Most of the sites exhibited favorable clinical healing; the most common complications were persistent edematous and inflamed gingivae beyond 1 week (n = 3), development of residual periodontal pockets (n = 2), and no reduction in RDs (n = 2). Significant improvements in wKG and RD were noted from baseline to 6 months.

Conclusion:

rhFGF-2-impregnated collagen membranes showed promising results in terms of increasing the wKG and recession coverage. A comparison with other standard therapies and agents in subsequent trials may shed more light on the clinical efficacy of this material.

Effects of combined use of recombinant human fibroblast growth factor-2 and β-tricalcium phosphate on ridge preservation in dehiscence bone defects after tooth extraction: A split-mouth study in dogs

BACKGROUND AND OBJECTIVE

Following tooth extraction, bone resorption is especially severe in cases complicated with buccal dehiscence bone defects. To minimize this, various bone graft materials have been used for alveolar ridge preservation. This study aimed to evaluate additional effects of the concomitant use of recombinant human fibroblast growth factor-2 (rhFGF-2) with β-tricalcium phosphate (β-TCP) on ridge preservation in a dehiscence defect model after tooth extraction in dogs.

MATERIALS AND METHODS

The maxillary first premolars of six beagle dogs were extracted and dehiscence defects of 4 × 4 × 5 mm (mesio-distal width × bucco-palatal width × depth) were created. Bilateral defects were filled with β-TCP combined with 0.3% (w/v) rhFGF-2 (test sites) or the scaffold alone (control sites). Twelve weeks post-surgery, histologic and histometric evaluations were performed.

RESULTS

Morphological measurements using micro-computed tomography revealed a significantly greater bone volume at the test sites (48.9 ± 9.06 mm³ ) than at the control sites (38.8 ± 7.24 mm³ ). Horizontal widths of the alveolar ridge at the coronal and middle position at the test sites (2.18 ± 0.71 mm, 2.93 ± 0.53 mm) were significantly greater than those at the control sites (1.47 ± 0.41 mm, 2.36 ± 0.45 mm, respectively). Regarding the histological parameters, the occupation rate of mineralized bone in the original defects was slightly higher at the test sites (44.07 ± 10.19%) than that at the control site (41.15 ± 6.56%).

CONCLUSIONS

These results indicate that the adjunct use of rhFGF-2 with β-TCP is effective for alveolar ridge preservation in fresh extraction sockets with dehiscence defects.

Polyethylenimine-alginate nanocomposites based bone morphogenetic protein 2 gene-activated matrix for alveolar bone regeneration

The repair and treatment of lost or damaged alveolar bone is of great significance in dentistry. Gene-activated matrix (GAM) technology provides a new way for bone regeneration. It is a local gene delivery system, which can not only recruit cells, but also influence their fate. For this purpose, we fabricated a bone morphogenetic protein 2 (BMP-2) gene-loaded absorbable gelatin sponge (AGS) and studied its effect on promoting alveolar bone formation and preventing resorption following tooth extraction in rats. In order to obtain better transfection efficiency, polyethylenimine-alginate (PEI-al) nanocomposites were synthesized and used as gene vectors to deliver BMP-2 cDNA plasmids (PEI-al/pBMP-2). The transfection efficiency, BMP-2 protein expression and osteogenic differentiation of the cells were investigated in vitro. In vivo, we established an alveolar bone regeneration model by extracting the rats' left mandibular incisors. The rats were randomly assigned into 3 groups: control group, unfilled sockets; AGS group, sockets filled with PEI-al solution-loaded gelatin sponges; AGS/BMP group, sockets filled with PEI-al/pBMP-2 solution-loaded gelatin sponge. Radiological and histological assays were performed at 4 and 8 weeks later. In vitro transfection assays indicated that PEI-al/pBMP-2 complexes could effectively transfect MC3T3-E1 cells, promoting the secretion of BMP-2 protein for at least 14 days, as well as increasing the expression of osteogenesis-related gene, ALP activity and calcium deposition. In vivo, western blot analysis showed BMP-2 protein was expressed in bone tissues of AGS/BMP group. The relative height of the residual alveolar ridge and bone mineral density (BMD) of the AGS/BMP group were significantly greater than those in the AGS and control groups at 4 and 8 weeks, respectively. Histological examination showed that, at 4 weeks, osteoblasts had grown in a cubic shape around the new bone in the AGS/BMP group, suggesting new bone formation. In conclusion, the combination of PEI-al/pBMP-2 complexes and gelatin sponge could promote alveolar bone regeneration, which may provide an easy and valuable method for alveolar ridge preservation and augmentation.

Polyethylenimine-alginate nanocomposites based bone morphogenetic protein 2 gene-activated matrix may provide an easy and valuable method for alveolar ridge regeneration.

Basic fibroblast growth factor regulates phosphate/pyrophosphate regulatory genes in stem cells isolated from human exfoliated deciduous teeth

Background

Basic fibroblast growth factor (bFGF) regulates maintenance of stemness and modulation of osteo/odontogenic differentiation and mineralization in stem cells from human exfoliated deciduous teeth (SHEDs). Mineralization in the bones and teeth is in part controlled by pericellular levels of inorganic phosphate (P_i), a component of hydroxyapatite, and inorganic pyrophosphate (PP_i), an inhibitor of mineralization. The progressive ankylosis protein (gene ANKH; protein ANKH) and ectonucleotide pyrophosphatase phosphodiesterase 1 (ENPP1/ENPP1) increase PP_i and inhibit mineralization, while tissue-nonspecific alkaline phosphatase (ALPL; TNAP) is a critical pro-mineralization enzyme that hydrolyzes PP_i. We hypothesized that regulation by bFGF of mineralization in SHEDs occurs by modulation of P_i/PP_i-associated genes.

Methods

Cells were isolated from human exfoliated deciduous teeth and characterized for mesenchymal stem cell characteristics. Cells were treated with bFGF, and the osteogenic differentiation ability was determined. The mRNA expression was evaluated using real-time polymerase chain reaction. The mineralization was examined using alizarin red S staining.

Results

Cells isolated from primary teeth expressed mesenchymal stem cell markers, CD44, CD90, and CD105, and were able to differentiate into osteo/odontogenic and adipogenic lineages. Addition of 10 ng/ml bFGF to SHEDs during in vitro osteo/odontogenic differentiation decreased ALPL mRNA expression and ALP enzyme activity, increased ANKH mRNA, and decreased both P_i/PP_i ratio and mineral deposition. Effects of bFGF on ALPL and ANKH expression were detected within 24 h. Addition of 20 mM fibroblast growth factor receptor (FGFR) inhibitor SU5402 revealed the necessity of FGFR-mediated signaling, and inclusion of 1 μg/ml cyclohexamide (CHX) implicated the necessity of protein synthesis for effects on ALPL and ANKH. Addition of exogenous 10 μm PP_i inhibited mineralization and increased ANKH, collagen type 1a1 (COL1A1), and osteopontin (SPP1) mRNA, while addition of exogenous P_i increased mineralization and osterix (OSX), ANKH, SPP1, and dentin matrix protein 1 (DMP1) mRNA. The effects of PP_i and P_i on mineralization could be replicated by short-term 3- and 7-day treatments, suggesting signaling effects in addition to physicochemical regulation of mineral deposition.

Conclusion

This study reveals for the first time the effects of bFGF on P_i/PP_i regulators in SHEDs and implicates these factors in how bFGF directs osteo/odontogenic differentiation and mineralization by these cells.

Electronic supplementary material

The online version of this article (10.1186/s13287-018-1093-9) contains supplementary material, which is available to authorized users.

Influence of Chromium-Cobalt-Molybdenum Alloy (ASTM F75) on Bone Ingrowth in an Experimental Animal Model

Cr-Co-Mo (ASTM F75) alloy has been used in the medical environment, but its use as a rigid barrier membrane for supporting bone augmentation therapies has not been extensively investigated. In the present study, Cr-Co-Mo membranes of different heights were placed in New Zealand white, male rabbit tibiae to assess the quality and volume of new bone formation, without the use of additional factors. Animals were euthanized at 20, 30, 40, and 60 days. Bone formation was observed in all of the cases, although the tibiae implanted with the standard membranes reached an augmentation of bone volume that agreed with the density values over the timecourse. In all cases, plasmatic exudate was found under the membrane and in contact with the new bone. Histological analysis indicated the presence of a large number of chondroblasts adjacent to the inner membrane surface in the first stages, and osteoblasts and osteocytes were observed under them. The bone formation was appositional. The Cr-Co-Mo alloy provides a scaffold with an adequate microenvironment for vertical bone volume augmentation, and the physical dimensions and disposition of the membrane itself influence the new bone formation.

Biodegradable gelatin/beta-tricalcium phosphate sponges incorporating recombinant human fibroblast growth factor-2 for treatment of recession-type defects: A split-mouth study in dogs

BACKGROUND AND OBJECTIVE

Tissue engineering by using recombinant human (rh) growth factor technology may offer a promising therapeutic approach for treatment of gingival recession. Fibroblast growth factor-2 (FGF-2) has shown the ability to promote periodontal regeneration. Gelatin/beta-tricalcium phosphate (gelatin/β-TCP) sponges have been developed to control the release of growth factors. The present study evaluated the periodontal regenerative efficacy of rhFGF-2 by comparing gelatin/β-TCP sponges incorporated with rhFGF-2 to the scaffolds alone in artificially created recession-type defects in dogs.

MATERIAL AND METHODS

Critically sized buccal gingival recession defects were surgically created on maxillary canine teeth of five dogs. In each animal, defects were randomized to receive either a gelatin/β-TCP sponge soaked with rhFGF-2 (gelatin/β-TCP/rhFGF-2) or phosphate-buffered saline (gelatin/β-TCP). Eight weeks after surgery, biopsy specimens were obtained and subjected to microcomputed tomography and histological analyses.

RESULTS

Complete root coverage was achieved in both groups. Microcomputed tomography revealed significantly greater new bone volume in the gelatin/β-TCP/rhFGF-2 group. Histologically, both groups achieved periodontal regeneration; however, gelatin/β-TCP/rhFGF-2 sites exhibited more tissue regeneration, characterized by significantly larger amounts of new cementum and new bone. Gelatin/β-TCP sites featured increased long junctional epithelium and connective tissue attachment. In the gelatin/β-TCP/rhFGF-2 sites, new bone exhibited many haversian canals and circumferential lamellae as well as remarkably thick periosteum with blood vascularization and hypercellularity.

CONCLUSION

Within the limitations of this study, rhFGF-2 in gelatin/β-TCP sponges exhibits an increased potential to support periodontal wound healing/regeneration in canine recession-type defects.

Single-staged vs. two-staged implant placement in vertically deficient alveolar ridges using bone ring technique - Part 2: implant osseointegration

OBJECTIVES

The aim of this study was to evaluate the osseointegration of implants placed in a single-staged compared to two-staged procedure using bone ring technique.

MATERIAL AND METHODS

In this study were used standardized, vertical alveolar bone defects in dogs. In the test group, dental implants (Straumann BL^® , Basel, Switzerland) were inserted simultaneously with bone ring technique. As control group served implants inserted 6 months following grafting. Implants of both groups were left for an osseointegration period of 3 and 6 months. The peri-implant bone loss and bone-to-implant contact within the bone ring and native bone were analyzed morphometrically. An explorative statistical analysis was performed.

RESULTS

The peri-implant bone level remained relatively stable within groups and between groups per given time period. Most of bone apposite on the implant surface in two groups was composed of newly formed bone. A nonparametric analysis of variance (ANOVA) revealed no significant advantage for two-staged implant placement for new and total bone, except for residual bone (P = .0084). Furthermore, two groups of implants performed similarly in bone ring and in native bone throughout the observation period.

CONCLUSIONS

In terms of osseointegration, both techniques are likely equally efficient in the present defect model. The single-staged implant placement with cortical bone grafts warrants further documentation in clinical studies.

Effects of Recombinant Human Bone Morphogenetic Protein-2 Dose and Ceramic Composition on New Bone Formation and Space Maintenance in a Canine Mandibular Ridge Saddle Defect Model

Treatment of mandibular osseous defects is a significant clinical challenge. Maintenance of the height and width of the mandibular ridge is essential for placement of dental implants and restoration of normal dentition. While guided bone regeneration using protective membranes is an effective strategy for maintaining the anatomic contour of the ridge and promoting new bone formation, complications have been reported, including wound failure, seroma, and graft exposure leading to infection. In this study, we investigated injectable low-viscosity (LV) polyurethane/ceramic composites augmented with 100 μg/mL (low) or 400 μg/mL (high) recombinant human bone morphogenetic protein-2 (rhBMP-2) as space-maintaining bone grafts in a canine mandibular ridge saddle defect model. LV grafts were injected as a reactive paste that set in 5-10 min to form a solid porous composite with bulk modulus exceeding 1 MPa. We hypothesized that compression-resistant LV grafts would enhance new bone formation and maintain the anatomic contour of the mandibular ridge without the use of protective membranes. At the rhBMP-2 dose recommended for the absorbable collagen sponge carrier in dogs (400 μg/mL), LV grafts maintained the width and height of the host mandibular ridge and supported new bone formation, while at suboptimal (100 μg/mL) doses, the anatomic contour of the ridge was not maintained. These findings indicate that compression-resistant bone grafts with bulk moduli exceeding 1 MPa and rhBMP-2 doses comparable to that recommended for the collagen sponge carrier support new bone formation and maintain ridge height and width in mandibular ridge defects without protective membranes.

Regenerative Medicine for Periodontal and Peri-implant Diseases

The balance between bone resorption and bone formation is vital for maintenance and regeneration of alveolar bone and supporting structures around teeth and dental implants. Tissue regeneration in the oral cavity is regulated by multiple cell types, signaling mechanisms, and matrix interactions. A goal for periodontal tissue engineering/regenerative medicine is to restore oral soft and hard tissues through cell, scaffold, and/or signaling approaches to functional and aesthetic oral tissues. Bony defects in the oral cavity can vary significantly, ranging from smaller intrabony lesions resulting from periodontal or peri-implant diseases to large osseous defects that extend through the jaws as a result of trauma, tumor resection, or congenital defects. The disparity in size and location of these alveolar defects is compounded further by patient-specific and environmental factors that contribute to the challenges in periodontal regeneration, peri-implant tissue regeneration, and alveolar ridge reconstruction. Efforts have been made over the last few decades to produce reliable and predictable methods to stimulate bone regeneration in alveolar bone defects. Tissue engineering/regenerative medicine provide new avenues to enhance tissue regeneration by introducing bioactive models or constructing patient-specific substitutes. This review presents an overview of therapies (e.g., protein, gene, and cell based) and biomaterials (e.g., resorbable, nonresorbable, and 3-dimensionally printed) used for alveolar bone engineering around teeth and implants and for implant site development, with emphasis on most recent findings and future directions.