Protein expression during early stages of bone regeneration under hydrophobic and hydrophilic titanium domes. A pilot study

The biofilm removal effect and osteogenic potential on the titanium surface by electrolytic cleaning: An in vitro comparison of electrolytic parameters and five techniques

OBJECTIVES

To determine the optimal current and time of electrolytic cleaning (EC), compare its biofilm removal effect with generic treatments and evaluate the influence of EC to surface characteristics and osteogenic potential of SLA titanium (Ti) discs.

MATERIALS AND METHODS

The six-species biofilm-covered Ti discs were placed as cathodes in physiologic saline and subjected to various current and time treatments. The residual biofilms were evaluated to determine the optimal parameters. The contaminated Ti discs were randomized and treated by rotating Ti brush; ultrasonic-scaling with metal tips; ultrasonic-scaling with PEEK tips; air-polishing and EC. The residual biofilms were compared using a lipopolysaccharide kit (LPS), scanning electron microscope (SEM), confocal laser scanning microscopy and colony-forming unit counting. Non-contaminated Ti discs were treated and characterized. The bone marrow mesenchymal stem cells (BMSCs) were cultured on treated non-contaminated Ti discs. The adhesion, proliferation, alkaline phosphatase (ALP) activity and osteocalcin level of BMSCs were assessed.

RESULTS

The parameters at 0.6A5min were considered optimal. For LPS and SEM, EC promoted a significantly greater biofilm removal than the other groups. There were no changes in the Ti discs' colour, topography, roughness and chemical elements after EC, and the electrolysis-treated Ti discs obtained a super-hydrophilic surface. EC positively impacted the proliferation and ALP activity of BMSCs, surpassing the efficacy of alternative treatments.

CONCLUSIONS

EC achieves a near-complete eradication of contaminants on the SLA surface, causes no surface damage with improved hydrophilicity, and promotes the early osteogenic response of BMSCs, which makes it a promising treatment for peri-implantitis.

Modulation of gene expression and bone formation by expanded and dense polytetrafluoroethylene membranes during guided bone regeneration: An experimental study

BACKGROUND

Nonresorbable membranes promote bone formation during guided bone regeneration (GBR), yet the relationships between membrane properties and molecular changes in the surrounding tissue are largely unknown.

AIM

To compare the molecular events in the overlying soft tissue, the membrane, and the underlying bone defect during GBR using dual-layered expanded membranes versus dense polytetrafluoroethylene (PTFE) membranes.

MATERIALS AND METHODS

Rat femur defects were treated with either dense PTFE (d-PTFE) or dual-layered expanded PTFE (dual e-PTFE) or left untreated as a sham. Samples were collected after 6 and 28 days for gene expression, histology, and histomorphometry analyses.

RESULTS

The two membranes promoted the overall bone formation compared to sham. Defects treated with dual e-PTFE exhibited a significantly higher proportion of new bone in the top central region after 28 days. Compared to that in the sham, the soft tissue in the dual e-PTFE group showed 2-fold higher expression of genes related to regeneration (FGF-2 and FOXO1) and vascularization (VEGF). Furthermore, compared to cells in the d-PTFE group, cells in the dual e-PTFE showed 2.5-fold higher expression of genes related to osteogenic differentiation (BMP-2), regeneration (FGF-2 and COL1A1), and vascularization (VEGF), in parallel with lower expression of proinflammatory cytokines (IL-6 and TNF-α). Multiple correlations were found between the molecular activities in membrane-adherent cells and those in the soft tissue.

CONCLUSION

Selective surface modification of the two sides of the e-PTFE membrane constitutes a novel means of modulating the tissue response and promoting bone regeneration.

Assessing bone formation on hydrophilic and hydrophobic implant surfaces in a murine model treated with bisphosphonates

OBJECTIVE

To evaluate the osseointegration of implants with hydrophobic (HFB) and hydrophilic (HFL) surfaces in a murine model of high-dose bisphosphonates (BPs).

MATERIALS AND METHODS

Sixty-four rats were randomly allocated into four groups: control group with HFB implants (CG-HFB), control group with HFL implants (CG-HFL), BP group with HFB implants (BP-HFB), and BP group with HFL implants (BP-HFL). Animals were euthanized after 15 and 45 days (n=8). The dependent variables assessed were the removal torque (biomechanical analysis), the bone volume around the implants (%BV/TV) (microtomographic analysis), the bone-implant contact (%BIC), the bone between the threads (%BBT) (histomorphometric analysis), and the expression of bone metabolism markers (immunohistochemistry analysis).

RESULTS

The CG-HFL and BP-HFL groups presented higher removal torque than the CG-HFB and BP-HFB implants. The %BIC of the CG-HFL surfaces was slightly higher than that of the CG-HFB implants. The BP-HFB and BP-HFL groups presented a higher %BIC than that of the CG-HFB and CG-HFL groups (p<0.001). BP therapy also increased the %BBT at both implant surfaces. Higher levels of ALP were observed in the matrix region of bone tissue on the HFL surfaces than on the HFB surfaces.

CONCLUSION

Both surfaces enable osseointegration in rats under BP therapy.

CLINICAL RELEVANCE

The study demonstrates that hydrophobic (HFB) and hydrophilic (HFL) implant surfaces can promote osseointegration in rats undergoing bisphosphonate therapy. The HFL surfaces exhibited improved biomechanical performance, higher bone-implant contact, and increased bone volume, suggesting their potential clinical relevance for implant success in individuals on bisphosphonate treatment.

Bone Tissue Engineering (BTE) of the Craniofacial Skeleton, Part I: Evolution and Optimization of 3D-Printed Scaffolds for Repair of Defects

Bone tissue regeneration is a complex process that proceeds along the well-established wound healing pathway of hemostasis, inflammation, proliferation, and remodeling. Recently, tissue engineering efforts have focused on the application of biological and technological principles for the development of soft and hard tissue substitutes. Aim is directed towards boosting pathways of the healing process to restore form and function of tissue deficits. Continued development of synthetic scaffolds, cell therapies, and signaling biomolecules seeks to minimize the need for autografting. Despite being the current gold standard treatment, it is limited by donor sites' size and shape, as well as donor site morbidity. Since the advent of computer-aided design/computer-aided manufacturing (CAD/CAM) and additive manufacturing (AM) techniques (3D printing), bioengineering has expanded markedly while continuing to present innovative approaches to oral and craniofacial skeletal reconstruction. Prime examples include customizable, high-strength, load bearing, bioactive ceramic scaffolds. Porous macro- and micro-architecture along with the surface topography of 3D printed scaffolds favors osteoconduction and vascular in-growth, as well as the incorporation of stem and/or other osteoprogenitor cells and growth factors. This includes platelet concentrates (PCs), bone morphogenetic proteins (BMPs), and some pharmacological agents, such as dipyridamole (DIPY), an adenosine A 2A receptor indirect agonist that enhances osteogenic and osteoinductive capacity, thus improving bone formation. This two-part review commences by presenting current biological and engineering principles of bone regeneration utilized to produce 3D-printed ceramic scaffolds with the goal to create a viable alternative to autografts for craniofacial skeleton reconstruction. Part II comprehensively examines recent preclinical data to elucidate the potential clinical translation of such 3D-printed ceramic scaffolds.

Bone regeneration in implant dentistry: Which are the factors affecting the clinical outcome?

The key factors that are needed for bone regeneration to take place include cells (osteoprogenitor and immune-inflammatory cells), a scaffold (blood clot) that facilitates the deposition of the bone matrix, signaling molecules, blood supply, and mechanical stability. However, even when these principles are met, the overall amount of regenerated bone, its stability over time and the incidence of complications may significantly vary. This manuscript provides a critical review on the main local and systemic factors that may have an impact on bone regeneration, trying to focus, whenever possible, on bone regeneration simultaneous to implant placement to treat bone dehiscence/fenestration defects or for bone contouring. In the future, it is likely that bone tissue engineering will change our approach to bone regeneration in implant dentistry by replacing the current biomaterials with osteoinductive scaffolds combined with cells and mechanical/soluble factors and by employing immunomodulatory materials that can both modulate the immune response and control other bone regeneration processes such as osteogenesis, osteoclastogenesis, or inflammation. However, there are currently important knowledge gaps on the biology of osseous formation and on the factors that can influence it that require further investigation. It is recommended that future studies should combine traditional clinical and radiographic assessments with non-invasive imaging and with patient-reported outcome measures. We also envisage that the integration of multi-omics approaches will help uncover the mechanisms responsible for the variability in regenerative outcomes observed in clinical practice.

Improvement implant osseointegration through nonthermal Ar/O2 plasma

This study investigated the effects of nonthermal Ar/O₂ plasma on the osseointegration of titanium implants. Through 8 weeks' in vivo evaluation of implants inserted into femoral bones of male Sprague-Dawley rats, the new bone mineralization apposition rate (MAR) is increased by 1.87 and 2.14 times for implants of smooth machined (SM) and sand-blasted and acid-etched (SLA) after plasma treatment. The bone volume fraction (bone volume/total volume, BV/TV) and bone-implant contact (BIC) ratios are improved by 1.31, 1.26 times and 1.35, 1.15 times after 90 s plasma treatment. The improved hydrophilicity rather than implant surface morphology is believed to play a critical role for the osseointegration improvement.

Platelet-rich fibrin combined with new bone graft material for mandibular defect repair: A in vivo study on rabbits

Insufficient bone mass is still a difficult point to be solved in oral implantation, so new bone graft materials are continuously researched and discussed in clinical practice in order to obtain better bone augmentation. In order to explore whether platelet-rich fibrin (PRF) can promote the formation of new bone in mineralized collagen (MC), MC/PRF and pure MC were implanted into the bilateral mandibular defect model in rabbits, respectively. Micro-CT scan and histological evaluation of the target area at 4, 8, and 12 weeks after operation. The results of Micro-CT three-dimensional reconstruction analysis showed that the ratio of bone volume to total volume (BV/TV), trabecular bone number (Tb.N), trabecular bone thickness (Tb.Th) and trabecular bone separation (Tb.Sp) and residual material volume fraction (RMVF) in the MC/PRF group were better than those in the MC group (p<0.05). The results of HE and Masson staining showed that the new bone formation and material degradation rate of the MC/PRF group were better than those of the MC group. The results suggest that PRF can accelerate the formation of new bone in MC, and provide new ideas for the clinical application of new bone graft materials.

In Vitro Bioactivity and Antibacterial Effects of a Silver-Containing Mesoporous Bioactive Glass Film on the Surface of Titanium Implants

Peri-implantitis is defined as a bacterial infection-induced inflammation and suppuration of soft and hard tissues surrounding a dental implant. If bacteria further invade the alveolar bone, they can easily cause bone loss and even lead to the early failure of a dental implant surgery. In the present study, an 80SiO₂–15CaO–5P₂O₅ mesoporous bioactive glass film system containing 1, 5, and 10 mol% of silver was prepared on titanium implant discs (MBG–Ag–coated Ti) using sol-gel and spin coating methods. The wettability and adhesion strength of the films were evaluated using contact angle measurements and adhesion strength tests, respectively. The phase composition, chemical bonding, morphology, and oxidation states of the films were analyzed via X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). In vitro bioactivity analysis of the films was performed by immersion in a simulated body fluid (SBF) for 24 h. Disk diffusion tests were performed on the early colonizing bacteria Aggregatibacter actinomycetemcomitans and Streptococcus mutans to evaluate the antibacterial ability of the films. A silver-containing mesoporous bioactive glass film with excellent biocompatibility and antibacterial properties was successfully prepared.

Enabling technologies towards personalization of scaffolds for large bone defect regeneration

Additive manufacturing (AM) can deliver personalized scaffolds to support large volume defect tissue regeneration - a major clinical challenge in many medical disciplines. The freedom in scaffold design and composition (biomaterials and biologics) offered by AM yields a plethora of possibilities but is confronted with a heterogenous biological regeneration potential across individuals. A key challenge is to make the right choice for individualized scaffolds that match biology, anatomy, and mechanics of patients. This review provides an overview of state-of-the-art technologies, that is, in silico modelling for scaffold design, omics and bioinformatics to capture patient biology and information technology for data management, that, when combined in a synergistic way with AM, have great potential to make personalized tissue regeneration strategies available to all patients, empowering precision medicine.

Implant-bone-interface: Reviewing the impact of titanium surface modifications on osteogenic processes in vitro and in vivo

Titanium is commonly and successfully used in dental and orthopedic implants. However, patients still have to face the risk of implant failure due to various reasons, such as implant loosening or infection. The risk of implant loosening can be countered by optimizing the osteointegration capacity of implant materials. Implant surface modifications for structuring, roughening and biological activation in favor for osteogenic differentiation have been vastly studied. A key factor for a successful stable long-term integration is the initial cellular response to the implant material. Hence, cell-material interactions, which are dependent on the surface parameters, need to be considered in the implant design. Therefore, this review starts with an introduction to the basics of cell-material interactions as well as common surface modification techniques. Afterwards, recent research on the impact of osteogenic processes in vitro and vivo provoked by various surface modifications is reviewed and discussed, in order to give an update on currently applied and developing implant modification techniques for enhancing osteointegration.

Histomorphometric analysis of implant osseointegration using hydrophilic implants in diabetic rats

OBJECTIVES

To evaluate peri-implant bone formation of titanium implants using an in vivo rat model with and without uncontrolled diabetes mellitus (DM) to evaluate osseointegration of hydrophobic (Neoporos®) and hydrophilic (Acqua®) surfaces.

MATERIALS AND METHODS

54 rats were divided into two groups: DM group (DMG) (streptozotocin-induced diabetes) and a control group (CG). Implants with hydrophobic (Neoporos®) and hydrophilic surfaces (Acqua®) were placed in the left or right tibia of animals. Animals were further divided into three groups (n = 9) euthanized after 7, 14, or 28 days. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were assessed in total, cortical, and medullary areas.

RESULTS

The DMG group, after a 7-day healing period, yielded with the Acqua implants presented significantly higher total BIC (+37.9%; p=0.03) and trabecular BIC (%) (+46.3%; p=0.02) values in comparison to the Neoporos implants. After 28 days of healing, the CG yielded that the cortical BAFO of Acqua implants to be significantly, 14%, higher (p=0.04) than Neoporos implants.

CONCLUSION

The positive effects of the Acqua surface were able to counteract the adverse impact of uncontrolled DM at early osseointegration periods. After 28 days in vivo, the metabolic systemic impairment caused by DM overcame the surface treatment effect, leading to impaired osseointegration in both hydrophilic and hydrophobic implants.

CLINICAL RELEVANCE

The adverse effects of diabetes mellitus with respect to bone healing may be minimized by deploying implants with strategically modified surfaces. This study evaluated the effects of implants with Acqua® and Neoporos® surfaces in both diabetic and healthy animals. During the initial healing period in diabetic animals, the hydrophilic surface was demonstrated to have beneficial effect on osseointegration in comparison to the hydrophobic surface. The results provide an insight into early healing, but the authors suggest that a future short-term and long-term clinical study is needed to assess the possible benefit of the Acqua® implant as well as in increasing the predictability of implant osseointegration.

Application of Raman Spectroscopic Imaging to Assess the Structural Changes at Cell-Scaffold Interface

Raman spectroscopic imaging and mapping were applied to characterise three-compound ceramic composite biomaterial consisting of chitosan, β-1,3-d-glucan (curdlan) and hydroxyapatite (HA) developed as a bone tissue engineering product (TEP). In this rapidly advancing domain of medical science, the urge for quick, reliable and specific method for products evaluation and tissue–implant interaction, in this case bone formation process, is constantly present. Two types of stem cells, adipose-derived stem cells (ADSCs) and bone marrow-derived stem cells (BMDSCs), were cultured on composite surface. Raman spectroscopic imaging provided advantageous information on molecular differences and spatial distribution of compounds within and between the cell-seeded and untreated samples at a microscopic level. With the use of this, it was possible to confirm composite biocompatibility and bioactivity in vitro. Deposition of HA and changes in its crystallinity along with protein adsorption proved new bone tissue formation in both mesenchymal stem cell samples, where the cells proliferated, differentiated and produced biomineralised extracellular matrix (ECM). The usefulness of spectroscopic Raman imaging was confirmed in tissue engineering in terms of both the organic and inorganic components considering composite–cells interaction.

Hydrogen plasma treatment confers enhanced bioactivity to silicon carbide-based nanowires promoting osteoblast adhesion

Nanomaterials play a pivotal role in modern regenerative medicine and tissue engineering, due to their peculiar physical, optical and biological properties once they are used in the nanometric size. Many evidences are showing the importance of biomaterial micro- and nano-topography on cellular adhesion, proliferation and differentiation, and hence, tissue regeneration. It is well known that nanowires (NWs) can mimic many different tissues as a result of their shape and their surface characteristics, and that surface hydrophilicity affects early protein adsorption and cellular adhesion. Therefore a material able to induce bone regeneration might be obtained by combining optimal surface topography and hydrophilicity. Based on these evidence, we designed silicon carbide (SiC) and core/shell silicon carbide/silicon dioxide (SiC/SiO_x) nanowires with modified wettability in order to analyze cell behavior, using an in-vitro osteoblastic model. First, we synthetized SiC NWs and SiC/SiO_x NWs through a chemical-vapour-deposition (CVD) process, and then we used hydrogen plasma to modify their hydrophilicity. Subsequently we evaluated the four types of NWs in terms of their morphology and contact angle, and we studied their behavior in the presence of MC3T3-E1 murine osteoblasts. Cell metabolic activity, viability, morphology and focal adhesions formation were considered. Morphological data showed different dimensions between SiC and SiC/SiO_x NWs. SiC NWs before the hydrogen plasma treatment showed a very low contact angle, that was absent after the treatment. Osteoblastic cells appeared healthy on all of the samples. Interestingly, both hydrophilic SiC NWs and SiC/SiO_x NWs generated a favorable distribution of focal adhesions around the cell body confirmed also by scanning electron microscopy images. Moreover, osteoblasts grown on hydrogen plasma treated SiC/SiO_x NWs showed an increased metabolic activity testified by a significantly higher cell number. In conclusion, we are here demonstrating that hydrogen plasma treatment of SiC and SiC/SiO_x NWs induce a better osteoblastic cellular adhesion by increasing NWs wettability. We are therefore suggesting that hydrogen plasma treatment of SiC/SiO_x can offer a suitable method to develop scaffolds for bone tissue engineering applications.

Proteomic and Transcriptomic Approaches for Studying Bone Regeneration in Health and Systemically Compromised Conditions

Bone regeneration is a complex biological process, where the molecular mechanisms are only partially understood. In an ageing population, where the prevalence of chronic diseases with an impact on bone metabolism is increasing, it becomes crucial to identify new strategies that would improve regenerative outcomes also in medically compromised patients. In this context, omics are demonstrating a great potential, as they offer new insights on the molecular mechanisms regulating physiologic/pathologic bone healing and, at the same time, allow the identification of new diagnostic and therapeutic targets. This review provides an overview on the current evidence on the use of transcriptomic and proteomic approaches in bone regeneration research, particularly in relation to type 1 diabetes and osteoporosis, and discusses future scenarios and potential benefits and limitations on the integration of multi-omics. It is suggested that future research will leverage the synergy of omics with statistical modeling and bioinformatics to prompt the understanding of the biology underpinning bone formation in health and medically compromised conditions. With an eye toward personalized medicine, new strategies combining the mining of large datasets and bioinformatic data with a detailed characterization of relevant phenotypes will need to be pursued to further the understanding of disease mechanisms.

Thermal-induced hydrophilicity enhancement of titanium dental implant surfaces

Titanium surface characteristics, including microtopography, chemical composition, and wettability, are essential features to achieve osseointegration of dental implants, but the choice of a particular surface topography is still a debated topic among clinicians. An increased level of implant surface hydrophilicity has been demonstrated to ameliorate osseointegration and shorten healing times. The aim of this work is to develop and test a suitable thermal-based method to enhance titanium surface wettability without modifying other characteristics of the implant surface. For this function, titanium discs with different surface topography have been thermally treated by testing different temperatures and excluding those that led to evident chromatic and morphological modifications. The selected surface gain in wettability after the treatment was assessed through contact angle measurement, chemistry modifications through x-ray photoelectron spectroscopy (XPS) analysis, and microtopography through scanning electron microscopy (SEM). Results showed a great enhancement in hydrophilicity on the tested surfaces without any other modification in terms of surface chemical composition and topography. A possible limitation of this method could be the persistent, although relatively slow, biological aging of the surfaces after the treatment. The present findings indicate that the described treatment could be a safe and effective method to enhance dental titanium hydrophilicity and thus its biological performance.

Atypical Mesenchymal Stromal Cell Responses to Topographic Modifications of Titanium Biomaterials Indicate Cytoskeletal- and Genetic Plasticity-Based Heterogeneity of Cells

Titanium (Ti) is widely used as a biomaterial for endosseous implants due to its relatively inert surface oxide layer that enables implanted devices the ability of assembling tissue reparative components that culminate in osseointegration. Topographic modifications in the form of micro- and nanoscaled structures significantly promote osseointegration and enhance the osteogenic differentiation of adult mesenchymal stromal cells (MSCs). While the biological mechanisms central to the differential responses of tissues and cells to Ti surface modifications remain unknown, adhesion and morphological adaptation are amongst the earliest events at the cell-biomaterial interface that are highly influenced by surface topography and profoundly impact the regulation of stem cell fate determination. This study correlated the effects of Ti topographic modifications on adhesion and morphological adaptation of human MSCs with phenotypic change. The results showed that modified Ti topographies precluded the adhesion of a subset of MSCs while incurring distinct morphological constraints on adherent cells. These effects anomalously corresponded with a differential expression of stem cell pluripotency and Wnt signalling-associated markers on both modified surfaces while additionally differing between hydrophobic and hydrophilic surface modifications—though extent of osteogenic differentiation induced by both modified topographies yielded similarly significant higher levels of cellular mineralisation in contrast to polished Ti. These results suggest that in the absence of deposited proteins and soluble factors, both modified topographies incur the selective adhesion of a subpopulation of progenitors with relatively higher cytoskeletal plasticity. While the presence of deposited proteins and soluble factors does not significantly affect adherence of cells, nanotopographic modifications enhance expression of pluripotency markers in proliferative conditions, which are conversely overridden by both modified topographies in osteogenic inductive conditions. Further deciphering the mechanisms underlying cellular selectivity and Ti topographic responsiveness will improve our understanding of stem cell heterogeneity and advance the potential of MSCs in regenerative medicine.

Barrier membranes: More than the barrier effect?

AIM

To review the knowledge on the mechanisms controlling membrane-host interactions in guided bone regeneration (GBR) and investigate the possible role of GBR membranes as bioactive compartments in addition to their established role as barriers.

MATERIALS AND METHODS

A narrative review was utilized based on in vitro, in vivo and available clinical studies on the cellular and molecular mechanisms underlying GBR and the possible bioactive role of membranes.

RESULTS

Emerging data demonstrate that the membrane contributes bioactively to the regeneration of underlying defects. The cellular and molecular activities in the membrane are intimately linked to the promoted bone regeneration in the underlying defect. Along with the native bioactivity of GBR membranes, incorporating growth factors and cells in membranes or with graft materials may augment the regenerative processes in underlying defects.

CONCLUSION

In parallel with its barrier function, the membrane plays an active role in hosting and modulating the molecular activities of the membrane-associated cells during GBR. The biological events in the membrane are linked to the bone regenerative and remodelling processes in the underlying defect. Furthermore, the bone-promoting environments in the two compartments can likely be boosted by strategies targeting both material aspects of the membrane and host tissue responses.

Bone healing dynamics associated with 3 implants with different surfaces: histologic and histomorphometric analyses in dogs

Purpose

This study evaluated differences in bone healing and remodeling among 3 implants with different surfaces: sandblasting and large-grit acid etching (SLA; IS-III Active^®), SLA with hydroxyapatite nanocoating (IS-III Bioactive^®), and SLA stored in sodium chloride solution (SLActive^®).

Methods

The mandibular second, third, and fourth premolars of 9 dogs were extracted. After 4 weeks, 9 dogs with edentulous alveolar ridges underwent surgical placement of 3 implants bilaterally and were allowed to heal for 2, 4, or 12 weeks. Histologic and histomorphometric analyses were performed on 54 stained slides based on the following parameters: vertical marginal bone loss at the buccal and lingual aspects of the implant (b-MBL and l-MBL, respectively), mineralized bone-to-implant contact (mBIC), osteoid-to-implant contact (OIC), total bone-to-implant contact (tBIC), mineralized bone area fraction occupied (mBAFO), osteoid area fraction occupied (OAFO), and total bone area fraction occupied (tBAFO) in the threads of the region of interest. Two-way analysis of variance (3 types of implant surface×3 healing time periods) and additional analyses for simple effects were performed.

Results

Statistically significant differences were observed across the implant surfaces for OIC, mBIC, tBIC, OAFO, and tBAFO. Statistically significant differences were observed over time for l-MBL, mBIC, tBIC, mBAFO, and tBAFO. In addition, an interaction effect between the implant surface and the healing time period was observed for mBIC, tBIC, and mBAFO.

Conclusions

Our results suggest that implant surface wettability facilitates bone healing dynamics, which could be attributed to the improvement of early osseointegration. In addition, osteoblasts might become more activated with the use of HA-coated surface implants than with hydrophobic surface implants in the remodeling phase.

Immediate provisionalization of bone level implants with a hydrophilic surface. A five-year follow-up of a randomized controlled clinical trial

OBJECTIVES

To follow-up the radiographic bone level changes and the clinical outcomes of immediately provisionalized and conventionally restored implants with a hydrophilic surface following 5 years of function.

MATERIALS AND METHODS

This was a 5-year follow-up of a prospective, randomized, single-blind controlled study involving 16 of the 24 originally recruited patients in need of a single-tooth replacement in the esthetic area. Implants were either immediately provisionalized with a non-occluding temporary crown (test group, n = 7), or left without a crown (control group, n = 9). In both groups, the definitive restoration was placed 16 weeks after implant placement. Radiographic and clinical parameters were evaluated at 36, 48, and 60 months post-implant placement, together with implant survival and success rates. The esthetic outcomes were measured with the Papilla Fill Index (PFI) and the Pink Esthetic Score (PES).

RESULTS

At 60 months, similar peri-implant bone loss was observed in the test (-0.42 mm ±0.17 mm) and in the control (-0.37 mm ±0.35 mm) groups. A tendency for an improved esthetic outcome from implant loading to the subsequent follow-ups was noticed in both groups. Both groups presented with high levels of long-term implant survival and success.

CONCLUSIONS

This study supports non-functional immediate provisionalization as a viable long-term option for the management of single-tooth implants in the esthetic area. However, the small sample size does not allow statistical inference at 60 months of follow-up and future adequately powered studies are warranted.

Degradation pattern of a porcine collagen membrane in an in vivo model of guided bone regeneration

BACKGROUND AND OBJECTIVE

Although collagen membranes have been clinically applied for guided tissue/bone regeneration for more than 30 years, their in vivo degradation pattern has never been fully clarified. A better understanding of the different stages of in vivo degradation of collagen membranes is extremely important, considering that the biology of bone regeneration requires the presence of a stable and cell/tissue-occlusive barrier during the healing stages in order to ensure a predictable result. Therefore, the aim of this study was to investigate the degradation pattern of a porcine non-cross-linked collagen membrane in an in vivo model of guided bone regeneration (GBR).

MATERIAL AND METHODS

Decalcified and paraffin-embedded specimens from calvarial defects of 18, 10-month-old Wistar rats were used. The defects were treated with a double layer of collagen membrane and a deproteinized bovine bone mineral particulate graft. At 7, 14 and 30 days of healing, qualitative evaluation with scanning electron microscopy and atomic force microscopy, and histomorphometric measurements were performed. Markers of collagenase activity and bone formation were investigated using an immunofluorescence technique.

RESULTS

A significant reduction of membrane thickness was observed from 7 to 30 days of healing, which was associated with progressive loss of collagen alignment, increased collagen remodeling and progressive invasion of woven bone inside the membranes. A limited inflammatory infiltrate was observed at all time points of healing.

CONCLUSION

The collagen membrane investigated was biocompatible and able to promote bone regeneration. However, pronounced signs of degradation were observed starting from day 30. Since successful regeneration is obtained only when cell occlusion and space maintenance exist for the healing time needed by the bone progenitor cells to repopulate the defect, the suitability of collagen membranes in cases where long-lasting barriers are needed needs to be further reviewed.