Selective Activation of C=C Bond in Sustainable Phenolic Compounds from Lignin via Photooxidation: Experiment and Density Functional Theory Calculations

Using new approach methodologies for the identification of a sensitizing co-formulant in a plant protection product

According to Regulation (EC) No 1272/2008, plant protection products (PPPs) can be classified for skin sensitisation by either considering the full formulation or the individual components. For a fraction of PPPs, an application of both assessment strategies results in discrepant classification results. We here aimed to resolve this discrepancy for PPP 1, an exemplary product, which was classified as sensitizing by a positive local lymph node assay but scored negative by the component-based method. We collected further data, as suggested by the regulation, based on a combination of new approach methodologies (NAMs) covering several key events (KEs) in the adverse outcome pathway model for skin sensitisation. Precisely, we employed quantitative structure activity relationship (QSAR) analysis (KE 1), the human cell line activation test (h-CLAT) complemented by Interleukin-8 release measurements (KE 3) and a novel short-term T cell test that is based on the induced expression of activation markers (KE 4). We tested the complete product, individual co-formulants (CFs) or single substances. PPP 1 tested positive in all in vitro assays. QSAR analysis revealed two CFs containing sensitizing chemicals. Only CF 1 was tested positive in the h-CLAT at a minimal induction threshold of 1.5 mg/mL, being less potent than PPP 1. In the T cell assay, both PPP 1 and CF 1 were tested positive at around 0.1 mg/mL. In conclusion, our results propose a novel integrated NAM-based strategy that should be explored further for skin sensitisation hazard identification of complex mixtures, such as PPPs.

Linkage and Stereochemistry Characters of Phenolic Antioxidant Product Formation

The present study developed a smart and novel strategy to elucidate the linkage and stereochemistry characters during phenolic antioxidant product formation. A series of phenolic isomers or analogues were treated with 2-phenyl-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide radical, to create 16 antioxidant dimerization reactions in aqueous solution. The products were rapidly identified by ultraperformance liquid chromatography coupled with electrospray ionization quadrupole time-of-flight tandem mass-spectrometry. Through a systematic function-structure relationship analysis of these reactions and theoretical calculations, it is concluded that the phenolic antioxidant product is formed via linear linkage or furanocyclic linkage. The linear linkage is fulfilled via a radical coupling and controlled by the O-O linkage exclusion, meta-linkage exclusion, and catechol-activated principles. However, when an exocyclic π-bond conjugates with the phenolic core and is affixed at the -OH para-position, the furanocyclic linkage may occur via a subsequent intramolecular Michael addition. The intramolecular addition always lacks Re-attack to show "α,β diastereoselectivity." The α,β diastereoselectivity is the stereochemistry character of furanocyclic linkage during phenolic antioxidant product formation. All these novel findings can benefit not only the field food science but also other fields as well.

Phytophenol Dimerization Reaction: From Basic Rules to Diastereoselectivity and Beyond

Phytophenol dimerization, which is a radical-mediated coupling reaction, plays a critical role in many fields, including lignin biosynthesis. To understand the reaction, 2,2-diphenyl-1-picrylhydrazyl radical was used to initiate a series of phytophenol dimerization reactions in methanol. The products were identified using ultra-performance liquid chromatography coupled with electrospray ionization quadrupole time-of-flight tandem mass spectrometry (UHPLC-ESI-Q-TOF-MS/MS) analysis in situ. The identified products mainly included biphenols, magnolol, honokiol, gingerol 6,6′-dimers, 3,6-dimethoxylcatechol β,β′ dimer, euphorbetin, bis-eugenol, dehydrodiisoeugenol, trans-ε-viniferin, (+) pinoresinol, and (−) pinoresinol. Structure–function relationship analysis allowed four basic rules to be defined: meta-excluded, C–C bonding domination, ortho-diOH co-activation, and exocyclic C=C involvement. The exocyclic C=C involvement, however, required conjugation with the phenolic core and the para-site of the -OH group, to yield a furan-fused dimer with two chiral centers. Computational chemistry indicated that the entire process was completed via a radical coupling reaction and an intramolecular conjugate addition reaction. Similar results were also found for the horseradish peroxidase (HRP)-catalyzed coniferyl alcohol dimerization, which produced (+) and (−) pinoresinols (but no (−) epipinoresinol), suggesting that the HRP-catalyzed process was essentially an exocyclic C=C-involved phytophenol dimerization reaction. The reaction was highly diastereoselective. This was attributed to the intramolecular reaction, which prohibited Re-attack. The four basic rules and diastereoselectivity can explain and even predict the main products in various chemical and biological events, especially oxidase-catalyzed lignin cyclization.

Understanding the structure, bonding and reactions of nanocrystalline semiconductors: a novel high-resolution instrumental method of solid-state synchronous luminescence spectroscopy

This Perspective Article describes the recent advancements in studies of nanocrystalline metal oxides using a novel ultra-high resolution method, solid-state synchronous luminescence spectroscopy (SS-SLS). Semiconductors notably include titanium dioxide and these studies shed light on the detailed electronic structure, composition, and their reactions. First, we critically discuss the limitations of the major existing non-spectroscopic and spectroscopic methods of characterization of electronic structure of nanocrystalline semiconductors and insulators. Second, we describe the foundations and the setup of SS-SLS as an enhanced-resolution, facile, non-contact, non-destructive, and highly capable method of studies of nanomaterials. Third, the following insights are featured which are obtained by SS-SLS, but are not available by other methods: (a) detection of traps of electric charge (specific mid-gap states); (b) discrimination between "surface" and "bulk" sites; (c) in situ studies of composite nanomaterials and mechanisms of reactions, (d) the derivative SS-SLS for accurate determination of energies of absorption and emission. The specific advantages of SS-SLS versus other methods and in direct comparison with "conventional" photoluminescence spectroscopy are highlighted. Finally, new opportunities and challenges of SS-SLS are presented. SS-SLS is an advanced spectroscopic method with significant potential to aid academia and industry in studies of chemo-sensing, photocatalysis, optoelectronic materials, applied surface science, development of instrumental analysis, and studies of mechanisms of surface and "bulk" chemical reactions.

Photoinduced Polymerization of Eugenol-Derived Methacrylates

Biobased monomers have been used to replace their petroleum counterparts in the synthesis of polymers that are aimed at different applications. However, environmentally friendly polymerization processes are also essential to guarantee greener materials. Thus, photoinduced polymerization, which is low-energy consuming and solvent-free, rises as a suitable option. In this work, eugenol-, isoeugenol-, and dihydroeugenol-derived methacrylates are employed in radical photopolymerization to produce biobased polymers. The polymerization is monitored in the absence and presence of a photoinitiator and under air or protected from air, using Real-Time Fourier Transform Infrared Spectroscopy. The polymerization rate of the methacrylate double bonds was affected by the presence and reactivity of the allyl and propenyl groups in the eugenol- and isoeugenol-derived methacrylates, respectively. These groups are involved in radical addition, degradative chain transfer, and termination reactions, yielding crosslinked polymers. The materials, in the form of films, are characterized by differential scanning calorimetry, thermogravimetric, and contact angle analyses.

Is Isoeugenol a Prehapten? Characterization of a Thiol-Reactive Oxidative Byproduct of Isoeugenol and Potential Implications for Skin Sensitization

Isoeugenol is widely used by the cosmetic and fragrance industries, but it also represents a known cause of skin sensitization adverse effects. Although devoid of a structural alert, isoeugenol has been classified as prehapten in virtue of the presence of a pre-Michael acceptor domain. Isoeugenol oxidation could theoretically lead to the generation of reactive toxic quinones, and photoinduced oxidative degradation of isoeugenol was reported to generate strongly thiol reactive byproducts. Nonetheless, the isoeugenol degradation product responsible for increased reactivity was found to be elusive. In the present study, an aged isoeugenol sample was subjected to reactivity-guided experiments to trap elusive thiol reactive species with a fluorescent nucleophile, viz. dansyl cysteamine (DCYA). The results herein presented demonstrate that photo-oxidation of isoeugenol led to the formation of a dimeric 7,4'-oxyneolignan with strong chemical reactivity, capable of nucleophilic substitution with thiols. The results were confirmed by isolation, structural characterization, and further NMR reactivity studies. Isoeugenol is already well-known as moderately reactive in thiol depletion assays, and was herein demonstrated to be capable of converting to more potent electrophilic species upon degradation, thus acting as a prehapten. The application of the reactivity-guided strategy described herein was shown to serve as an effective tool to investigate elusive skin sensitizers.

[The peculiar features of the distribution of 2-metoxy-4-(1-propenyl)-hydroxybenzene in the organism of the warm-blooded animals]

The present study was designed to elucidate the distribution patterns of 2-metoxy-4-(1-propenyl)-hydroxybenzene in the organism of the warm-blooded animals (rats) after its intragastric administration at a dose equivalent to three 50% lethal doses (LD-50) for this compound. 2-metoxy-4-(1-propenyl)-hydroxybenzene was extracted in the unmodified form from the organs and blood of the dead animals after the dualfold infusion of the tissues with ethyl-acetate and purification by chromatography on a macrocolumn with silica gel L 40/100 mcm making use of the hexane-acetone mixture (7:3) mobile phase as the eluent. TLC, HPLC, and UV-spectrometry were employed to identify and quantify the analyte. The study has demonstrated the presence of unmetabolized 2-metoxy-4-(1-propenyl)-hydroxybenzene in the organs and blood of the poisoned animals. The largest amounts of this compound (expressed in milligrams per 100 g of the tissue) were accumulated in the stomach with its contents (236.22±28.21), small intestine with their contents (122.29±15.55), lungs (44.28±2.10), and spleen (44.00±4.70).