Bone graft and mesenchimal stem cells: clinical observations and histological analysis

An Up-to-Date Review of Materials Science Advances in Bone Grafting for Oral and Maxillofacial Pathology

Bone grafting in oral and maxillofacial surgery has evolved significantly due to developments in materials science, offering innovative alternatives for the repair of bone defects. A few grafts are currently used in clinical settings, including autografts, xenografts, and allografts. However, despite their benefits, they have some challenges, such as limited availability, the possibility of disease transmission, and lack of personalization for the defect. Synthetic bone grafts have gained attention since they have the potential to overcome these limitations. Moreover, new technologies like nanotechnology, 3D printing, and 3D bioprinting have allowed the incorporation of molecules or substances within grafts to aid in bone repair. The addition of different moieties, such as growth factors, stem cells, and nanomaterials, has been reported to help mimic the natural bone healing process more closely, promoting faster and more complete regeneration. In this regard, this review explores the currently available bone grafts, the possibility of incorporating substances and molecules into their composition to accelerate and improve bone regeneration, and advanced graft manufacturing techniques. Furthermore, the presented current clinical applications and success stories for novel bone grafts emphasize the future potential of synthetic grafts and biomaterial innovations in improving patient outcomes in oral and maxillofacial surgery.

Combination of stem cell-derived secretome from human exfoliated deciduous teeth with Yemeni Sidr honey on cell viability and migration: an in vitro study

INTRODUCTION

Bone diseases have a profound global impact, especially when the body's innate regenerative capacity falls short in the face of extensive damage. Stem cells from human exfoliated deciduous teeth (SHEDs), discovered in 2003, offer a promising solution for tissue repair, as they self-renew naturally and are easily obtainable. Mesenchymal stem cells (MSCs), including SHEDs, are believed to promote tissue regeneration by releasing growth factors, collectively known as the secretome.

AIMS

This study explored the potential of combining SHED-derived secretome with Yemeni Sidr honey to improve osteoblast and fibroblast cell viability and migration.

MATERIALS AND METHODS

The experiment involved treating cell cultures of two types of rat cell lines - 7F2 osteoblast and BHK-21 fibroblast immortalized cells - with SHED-derived secretome and Yemeni Sidr honey. After the treatment, cell viability was measured using the MTT assay, which calculates OD at 590 nm. Additionally, the scratch assay was conducted to evaluate cell migration, and ImageJ software was used for data processing.

RESULTS

The findings indicated that combining SHED-derived secretome and Yemeni Sidr honey enhanced osteoblast and fibroblast cell viability and migration. Furthermore, the study highlighted the difference in the stimulative potential of SHED-derived secretome, Yemeni Sidr honey, and their combination, on the viability and migration of the cultured cells.

CONCLUSION

The research concludes that combining SHED-derived secretome with Yemeni Sidr honey has the potential to promote cell viability and migration in in-vitro settings. The synergistic application of these substances has been found to be more effective -when combined in a dose-dependent manner- than their counterparts. Overall, the current study serves as a foundation for further investigations to establish if the explored substance has any useful clinical applications.

The Use of Newly Synthesized Composite Scaffolds for Bone Regeneration - A Review of Literature

Bone tissue engineering is a multidisciplinary concept that combines biological and engineering principles to repair bone defects. Three elements that have a fundamental role in bone tissue engineering are scaffolds, stem cells, and bioactive components. Scaffolds mimic extracellular matrix functions and provide mechanical support for the new tissue formation. They are made of different natural and synthetic materials that can be categorized into three main groups: ceramics, metals, and polymers. Among them, synthetic polyesters and their combination with bioceramics, have been the most frequently used for scaffold fabrication. They could be potentially applied in clinical practice in the future as an alternative to the standard use of bone grafts but more studies are needed to assess their performance in the challenging conditions of human bone defects.

Bone Grafts and Substitutes in Dentistry: A Review of Current Trends and Developments

After tooth loss, bone resorption is irreversible, leaving the area without adequate bone volume for successful implant treatment. Bone grafting is the only solution to reverse dental bone loss and is a well-accepted procedure required in one in every four dental implants. Research and development in materials, design and fabrication technologies have expanded over the years to achieve successful and long-lasting dental implants for tooth substitution. This review will critically present the various dental bone graft and substitute materials that have been used to achieve a successful dental implant. The article also reviews the properties of dental bone grafts and various dental bone substitutes that have been studied or are currently available commercially. The various classifications of bone grafts and substitutes, including natural and synthetic materials, are critically presented, and available commercial products in each category are discussed. Different bone substitute materials, including metals, ceramics, polymers, or their combinations, and their chemical, physical, and biocompatibility properties are explored. Limitations of the available materials are presented, and areas which require further research and development are highlighted. Tissue engineering hybrid constructions with enhanced bone regeneration ability, such as cell-based or growth factor-based bone substitutes, are discussed as an emerging area of development.

Effectiveness of mesenchymal stem cell-conditioned medium in bone regeneration in animal and human models: a systematic review and meta-analysis

BACKGROUND

Given the limitations of current therapies for the reconstruction of bone defects, regenerative medicine has arisen as a new therapeutic strategy along with mesenchymal stem cells (MSCs), which, because of their osteogenic potential and immunomodulatory properties, have emerged as a promising alternative for the treatment of bone injuries. In vivo studies have demonstrated that MSCs have a positive effect on regeneration due to their secretion of cytokines and growth factors that, when collected in conditioned medium (MSC-CM) and applied to an injured tissue, can modulate and promote the formation of new tissue.

OBJECTIVE

To evaluate the effectiveness of application of conditioned medium derived from mesenchymal stem cells in bone regeneration in animal and human models.

METHODS

We conducted a systematic review with a comprehensive search through February of 2018 using several electronic databases (MEDLINE, EMBASE, SCOPUS, CENTRAL (Ovid), and LILACS), and we also used the "snowballing technique". Articles that met the inclusion criteria were selected through abstract review and subsequent assessment of the full text. We assessed the risk of bias with the SYRCLE and Cochrane tools, and three meta-analyses were performed.

RESULTS

We included 21 articles, 19 of which used animal models and 2 of which used human models. In animal models, the application of MSC-CM significantly increased the regeneration of bone defects in comparison with control groups. Human studies reported early mineralization in regenerated bones, and no bone resorption, inflammation, nor local or systemic alterations were observed in any case. The meta-analysis showed an overall favorable effect of the application of MSC-CM.

CONCLUSIONS

The application of MSC-CM to bone defects has a positive and favorable effect on the repair and regeneration of bone tissue, particularly in animal models. It is necessary to perform additional studies to support the application of MSC-CM in clinical practice.

Bone Tissue Regeneration in the Oral and Maxillofacial Region: A Review on the Application of Stem Cells and New Strategies to Improve Vascularization

Bone tissue engineering techniques are a promising alternative for the use of autologous bone grafts to reconstruct bone defects in the oral and maxillofacial region. However, for successful bone regeneration, adequate vascularization is a prerequisite. This review presents and discusses the application of stem cells and new strategies to improve vascularization, which may lead to feasible clinical applications. Multiple sources of stem cells have been investigated for bone tissue engineering. The stromal vascular fraction (SVF) of human adipose tissue is considered a promising single source for a heterogeneous population of essential cells with, amongst others, osteogenic and angiogenic potential. Enhanced vascularization of tissue-engineered grafts can be achieved by different mechanisms: vascular ingrowth directed from the surrounding host tissue to the implanted graft, vice versa, or concomitantly. Vascular ingrowth into the implanted graft can be enhanced by (i) optimizing the material properties of scaffolds and (ii) their bioactivation by incorporation of growth factors or cell seeding. Vascular ingrowth directed from the implanted graft towards the host tissue can be achieved by incorporating the graft with either (i) preformed microvascular networks or (ii) microvascular fragments (MF). The latter may have stimulating actions on both vascular ingrowth and outgrowth, since they contain angiogenic stem cells like SVF, as well as vascularized matrix fragments. Both adipose tissue-derived SVF and MF are cell sources with clinical feasibility due to their large quantities that can be harvested and applied in a one-step surgical procedure. During the past years, important advancements of stem cell application and vascularization in bone tissue regeneration have been made. The development of engineered in vitro 3D models mimicking the bone defect environment would facilitate new strategies in bone tissue engineering. Successful clinical application requires innovative future investigations enhancing vascularization.

Assessment of stem cell viability in the initial healing period in rabbits with a cranial bone defect according to the type and form of scaffold

PURPOSE

Increased bone regeneration has been achieved through the use of stem cells in combination with graft material. However, the survival of transplanted stem cells remains a major concern. The purpose of this study was to evaluate the viability of transplanted mesenchymal stem cells (MSCs) at an early time point (24 hours) based on the type and form of the scaffold used, including type I collagen membrane and synthetic bone.

METHODS

The stem cells were obtained from the periosteum of the otherwise healthy dental patients. Four symmetrical circular defects measuring 6 mm in diameter were made in New Zealand white rabbits using a trephine drill. The defects were grafted with 1) synthetic bone (β-tricalcium phosphate/hydroxyapatite [β-TCP/HA]) and 1×105 MSCs, 2) collagen membrane and 1×105 MSCs, 3) β-TCP/HA+collagen membrane and 1×105 MSCs, or 4) β-TCP/HA, a chipped collagen membrane and 1×105 MSCs. Cellular viability and the cell migration rate were analyzed.

RESULTS

Cells were easily separated from the collagen membrane, but not from synthetic bone. The number of stem cells attached to synthetic bone in groups 1, 3, and 4 seemed to be similar. Cellular viability in group 2 was significantly higher than in the other groups (P<0.05). The cell migration rate was highest in group 2, but this difference was not statistically significant (P>0.05).

CONCLUSIONS

This study showed that stem cells can be applied when a membrane is used as a scaffold under no or minimal pressure. When space maintenance is needed, stem cells can be loaded onto synthetic bone with a chipped membrane to enhance the survival rate.

Bone allografts combined with adipose-derived stem cells in an optimized cell/volume ratio showed enhanced osteogenesis and angiogenesis in a murine femur defect model

Critical sized defects, especially in long bones, pose one of the biggest problems in orthopedic surgery. By definition, these defects do not heal without further treatment. Different therapeutic options range from autologous bone grafts, for example, free vascularized bone grafts, to commercially available bone allografts. Disadvantages of these bone allografts are related to reduced osteogenesis, since they are solely composed of cell-free bone matrix. The purpose of this study was to investigate the cell seeding efficiency of human adipose-derived stem cells (hASCs) on human bone allografts in vitro and furthermore analyze these optimized seeded allografts in a critical sized defect model in vivo. Cancellous human bone allografts were colonized with human ASCs in vitro. Cell seeding efficiency was evaluated by Cell Counting Kit-8 assay. Thereafter, optimized hASC-seeded bone scaffolds were examined in a murine femur defect model, stabilized with the MouseExFix system. Subsequently, x-ray analysis and histology were performed. Examination of cell seeding efficiency revealed an optimum starting population of 84,600 cells per 100 mm³ scaffold. In addition, scaffolds seeded with hASCs showed increased osteogenesis compared with controls. Histological analysis revealed increased remodeling and elevated new bone formation within hASC-seeded scaffolds. Moreover, immunohistochemical stainings revealed increased proliferation, osteogenesis, and angiogenesis. In this study, we systemically optimized cell/volume ratio of two promising components of tissue engineering: hASCs and human bone allografts. These findings may serve as a basis for future translational studies. KEY MESSAGES: Bone tissue engineering. Mesenchymal stem cells derived from human adipose tissue (hASCs). Optimal cell/volume ratio of cell-seeded scaffolds. Increased osteogenesis and angiogenesis in vivo.

Autologous cell-coated particles for the treatment of segmental bone defects-a new cell therapy approach

Background

Adipose tissue-derived mesenchymal stem cells (AT-MSCs) are one of the most potent adult stem cells, capable of differentiating into bone, cartilage, adipose, muscle, and others. An innovative autologous AT-MSC-derived cell-based product (BonoFill-II) for bone tissue regeneration was developed to be suited as a bone graft for segmental bone defects.

Methods

BonoFill-II was transplanted into 8 sheep with 3.2-cm full cortex segmental defect formed in the tibia. Bone regeneration was followed by X-ray radiographs for 12 weeks. At experiment termination, the healed tibia bones were analyzed by computed tomography, histology, and mechanical tests.

Results

Our results indicate that one dose of BonoFill-II injectable formula led to an extensive bone growth within the transplantation site and to a complete closure of the critical gap in the sheep’s tibia in a relatively short time (8–12 weeks), with no inflammation and no other signs of graft rejection. This new and innovative product opens new prospects for the treatment of long bone defects.

Conclusions

Injection of BonoFill-II (an innovative autologous cell therapy product for bone tissue regeneration) into a critical size segmental defect model (3.2 cm), generated in the sheep tibia, achieved full bridging of the gap in an extremely short period (8–12 weeks).

Mesenchymal stem cells in post-surgical cavities of large maxillary bone lesions

BACKGROUND

Recent studies have highlighted that MSCs are capable of regenerating large bone defects when used in combination with bone substitutes and increasing allo-graft osteointegration. We investigated the hypothesis that autologous MSCs may lead to increased bone regeneration and reduced healing time in post-surgical cavities of large maxillary bone lesions.

METHODS

This study involved 10 patients (TEST GROUP) (6 males and 4 females). All patients had expansive mandibular lesions larger than 3 cm. From the surgical point of view, the 10 patients were treated with MSCs (withdrawal of the iliac crest bone marrow BMMSs) directly into the post-surgical cavity, without the addition of filler.

RESULTS

and radiological data, in the postoperative, were compared to those of patients who did not receive any grafting of MSCs. The 7 patients with mandibular lesions showed a rapid and very good healing with an 85-90% ossification of the major defect at 12 months.

CONCLUSIONS

Through the use of stem cells a greater ossification of the residual cavity (85-90%) was observed at 12 months after surgical enucleation in contenitive defects.

Scintigraphic evaluation of the osteoblastic activity of rabbit tibial defects after HYAFF11 membrane application

Background

An unfavorable condition for bone healing is the presence of bone defects. Under such conditions, a material can play a role to cover fractured or defective bone. Technological advances now allow for the use of such material. Hyalonect^® (Fidia Advanced Biopolymers SLR, Italy), a novel membrane comprising knitted fibers of esterified hyaluronan (HYAFF11) can be used to cover fractured or grafted bone and can also serve as a scaffold to keep osteoprogenitor cells in place. The aim of this study was to compare osteoblastic activity by the use of scintigraphic methods in defective rabbit tibias during early-phase bone healing with or without a hyaluronan-based mesh.

Methods

Two groups (A and B) of New Zealand albino rabbits were used; each group included 10 animals. Operations on all rabbits were performed under general anesthesia. We also resected 10-mm bone segments from each animal’s tibial diaphysis. After resection, tibias with defects were fixed using Kirschner wires. In group A, no hyaluronan-based mesh was used. In group B, tibial segmental defects were enclosed with a hyaluronan-based mesh. The rabbits were followed up for 4 weeks postoperatively, after which bone scintigraphic studies were performed on each animal to detect and compare osteoblastic activity.

Results

The mean count in the fracture side of the hyaluronan-based mesh group was significantly higher compared to that of the group A (p = 0.019). However, there was no significant difference between group B and control rabbits with respect to the mean count on the intact bone side (p = 0.437). The bone defect (fracture)/intact bone mean count ratio was significantly higher in group B compared to group A (p = 0.008).

Conclusions

A hyaluronan-based mesh plays a role in promoting osteoblastic activity. Hyalonect^® is suitable for restoring tissue continuity whenever the periosteal membrane is structurally impaired or inadequate. Our results demonstrated that, during early-phase bone healing, osteoblastic activity was increased in bone defect sites when a hyaluronan-based mesh was also used. The most important aspect of this study concerns its scintigraphy-based design. This study is the first to use a scintigraphic method to demonstrate the effectiveness of hyaluronic acid-based material for bone healing.