Silver-, calcium-, and copper molybdate compounds: Preparation, antibacterial activity, and mechanisms

Highly stable and antifungal properties on the oilseed rape of Cu3(MoO4)2(OH)2 nanoflakes prepared by simple aqueous precipitation

In the last few decades, nanoparticles have been a prominent topic in various fields, particularly in agriculture, due to their unique physicochemical properties. Herein, molybdenum copper lindgrenite Cu3(MoO4)2(OH)2 (CM) nanoflakes (NFs) are synthesized by a one-step reaction involving α-MoO3 and CuCO3⋅Cu(OH)2⋅xH2O solution at low temperature for large scale industrial production and developed as an effective antifungal agent for the oilseed rape. This synthetic method demonstrates great potential for industrial applications. Infrared spectroscopy and X-ray diffraction (XRD) results reveal that CM samples exhibit a pure monoclinic structure. TG and DSC results show the thermal stable properties. It can undergo a phase transition form copper molybdate (Cu3Mo2O9) at about 300 °C. Then Cu3Mo2O9 nanoparticles decompose into at CuO and MoO3 at 791 °C. The morphology of CM powder is mainly composed of uniformly distributed parallelogram-shaped nanoflakes with an average thickness of about 30 nm. Moreover, the binding energy of CM NFs is measured to be 2.8 eV. To assess the antifungal properties of these materials, both laboratory and outdoor experiments are conducted. In the pour plate test, the minimum inhibitory concentration (MIC) of CM NFs against Sclerotinia sclerotiorum (S. sclerotiorum) is determined to be 100 ppm, and the zone of inhibiting S. sclerotiorum is 14 mm. When the concentration is above 100 nm, the change rate of the hyphae circle slows down a little and begins to decrease until to 200 ppm. According to the aforementioned findings, the antifungal effects of a nano CM NFs solution are assessed at different concentrations (0 ppm (clear water), 40 ppm, and 80 ppm) on the growth of oilseed rape in an outdoor setting. The results indicate that the application of CM NFs led to significant inhibition of S. sclerotiorum. Specifically, when the nano CM solution was sprayed once at the initial flowering stage at a concentration of 80 ppm, S. sclerotiorum growth was inhibited by approximately 34%. Similarly, when the solution was sprayed once at the initial flowering stage and once at the rape pod stage, using a concentration of 40 ppm, a similar level of inhibition was achieved. These outcomes show that CM NFs possess the ability to bind with more metal ions due to their larger specific surface area. Additionally, their semiconductor physical properties enable the generation of reactive oxygen species (ROS). Therefore, CM NFs hold great potential for widespread application in antifungal products.

Antibacterial Activity of Molybdenum Oxide-Polyacrylonitrile Composite Membrane with Fast Silver Ion Reduction

The development of hybrid composite antibacterial agents for wound dressing has garnered significant attention due to their remarkable antibacterial efficacy and their potential to mitigate microbial resistance. In this study, we present an approach to designing and fabricating wound dressing membranes, utilizing molybdenum oxide-polyacrylonitrile (MoO3/PAN) hybrid composites through electrospinning. Subsequently, we enhanced the membrane's effectiveness by introducing silver (Ag@MoO3/PAN) into the matrix via a rapid (within one min) green synthesis method under UV irradiation. Initially, we discuss the morphological characteristics and structural attributes of the resulting membranes. Subsequent investigations explore the antibacterial mechanisms of both MoO3 and Ag+, revealing that the incorporation of silver substantially enhanced antibacterial activity. Additionally, we elucidate the surface properties, noting that the introduction of silver increases the surface area of the composite membrane by 25.89% compared with the pristine MoO3/PAN membrane. Furthermore, we observe a 9% reduction in the water contact angle (WCA) for the Ag@MoO3/PAN membrane, indicating improved hydrophilicity. Finally, we analyze the release behavior of the Ag@MoO3/PAN membrane. Our findings demonstrate an initial burst release within the first 7 h, followed by a controlled and sustained release pattern over a period of 7 days.

Pan-Genome Analysis of Transcriptional Regulation in Six Salmonella enterica Serovar Typhimurium Strains Reveals Their Different Regulatory Structures

Establishing transcriptional regulatory networks (TRNs) in bacteria has been limited to well-characterized model strains. Using machine learning methods, we established the transcriptional regulatory networks of six Salmonella enterica serovar Typhimurium strains from their transcriptomes. By decomposing a compendia of RNA sequencing (RNA-seq) data with independent component analysis, we obtained 400 independently modulated sets of genes, called iModulons. We (i) performed pan-genome analysis of the phylogroup structure of S. Typhimurium and analyzed the iModulons against this background, (ii) revealed different genetic signatures in pathogenicity islands that explained phenotypes, (iii) discovered three transport iModulons linked to antibiotic resistance, (iv) described concerted responses to cationic antimicrobial peptides, and (v) uncovered new regulons. Thus, by combining pan-genome and transcriptomic analytics, we revealed variations in TRNs across six strains of serovar Typhimurium. IMPORTANCE Salmonella enterica serovar Typhimurium is a pathogen involved in human nontyphoidal infections. Treating S. Typhimurium infections is difficult due to the species's dynamic adaptation to its environment, which is dictated by a complex transcriptional regulatory network (TRN) that is different across strains. In this study, we describe the use of independent component analysis to characterize the differential TRNs across the S. Typhimurium pan-genome using a compendium of high-quality RNA-seq data. This approach provided unprecedented insights into the differences between regulation of key cellular functions and pathogenicity in the different strains. The study provides an impetus to initiate a large-scale effort to reveal the TRN differences between the major phylogroups of the pathogenic bacteria, which could fundamentally impact personalizing treatments of bacterial pathogens.

Insights into the Antimicrobial Activity of Hydrated Cobaltmolybdate Doped with Copper

Molybdates are biocidal materials that can be useful in coating surfaces that are susceptible to contamination and the spread of microorganisms. The aim of this work was to investigate the effects of copper doping of hydrated cobalt molybdate, synthesized by the co-precipitation method, on its antibacterial activity and to elucidate the structural and morphological changes caused by the dopant in the material. The synthesized materials were characterized by PXRD, Fourier Transformed Infrared (FTIR), thermogravimetric analysis/differential scanning calorimetry (TG/DSC), and SEM-Energy Dispersive Spectroscopy (SEM-EDS). The antibacterial response of the materials was verified using the Minimum Inhibitory Concentration (MIC) employing the broth microdilution method. The size of the CoMoO₄·1.03H₂O microparticles gradually increased as the percentage of copper increased, decreasing the energy that is needed to promote the transition from the hydrated to the beta phase and changing the color of material. CoMoO₄·1.03H₂O obtained better bactericidal performance against the tested strains of Staphylococcus aureus (gram-positive) than Escherichia coli (gram-negative). However, an interesting point was that the use of copper as a doping agent for hydrated cobalt molybdate caused an increase of MIC value in the presence of E. coli and S. aureus strains. The study demonstrates the need for caution in the use of copper as a doping material in biocidal matrices, such as cobalt molybdate.

Fabrication of a novel ternary heterojunction composite Ag2MoO4/Ag2S/MoS2 with significantly enhanced photocatalytic performance

A novel ternary heterojunction Ag₂MoO₄/Ag₂S/MoS₂ was successfully fabricated via a facile two-step method. The prepared ternary heterojunction showed much enhanced catalytic activity compared with monomers and binary heterojunctions.

Pharmacies for pain and trauma in ancient Greece

PURPOSE

To summarize pharmacies for pain and trauma in ancient Greece, to present several pharmaceutical/therapeutical methods reported in myths and ancient texts, and to theorize on the medical explanation upon which these pharmacies were used.

METHOD

A thorough literature search was undertaken in PubMed and Google Scholar as well as in physical books in libraries to summarize the pharmacies and pain practices used for trauma in ancient Greece.

RESULTS

Archeological findings and historical texts have revealed that humans have always suffered from diseases and trauma that were initially managed and healed by priests and magicians. In early Greek antiquity, the term pharmacy was related to herbal inquiries, with the occupants called charmers and pharmacists. Additionally, apart from therapeutic methods, ancient Greeks acknowledged the importance of pain therapy and had invented certain remedies for both acute and chronic pain management. With observations and obtaining experience, they used plants, herbs, metals and soil as a therapeutic method, regardless of the cultural level of the population. They achieved sedation and central and peripheral analgesia with opium and cold, as well as relaxation of smooth muscle fibers and limiting secretions with atropina.

CONCLUSION

History showed a lot of experience obtained from empirical testing of pain treatment in ancient people. Experience and reasoning constructed an explanatory account of diseases, therapies and health and have provided for the epistemology of medicine.

Unexpected Sequential NH3/H2O Solid/Gas Phase Ligand Exchange and Quasi-Intramolecular Self-Protonation Yield [NH4Cu(OH)MoO4], a Photocatalyst Misidentified before as (NH4)2Cu(MoO4)2

[NH₄Cu(OH)MoO₄] as active photocatalyst in the decomposition of Congo Red when irradiated by UV or visible light has been prepared in an unusual ammonia/water ligand exchange reaction of [tetraamminecopper(II)] molybdate, [Cu(NH₃)₄]MoO₄. [Cu(NH₃)₄]MoO₄ was subjected to moisture of open air at room temperature. Light blue orthorhombic [Cu(NH₃)(H₂O)₃]MoO₄ was formed in 2 days as a result of an unexpected solid/gas phase ammonia-water ligand exchange reaction. This complex does not lose its last ammonia ligand on further standing in open air; however, a slow quasi-intramolecular (self)-protonation reaction takes place in 2-4 weeks, producing a yellowish-green microcrystalline material, which has been identified as a new compound, [NH₄Cu(OH)MoO₄], ( a = 10,5306 Å, b = 6.0871 Å, c = 8.0148 Å, β = 64,153°, C2, Z = 4). Mechanisms are proposed for both the sequential ligand exchange and the self-protonation reactions supported by ab initio quantum-chemical calculations and deuteration experiments as well. The [Cu(NH₃)(H₂O)₃]MoO₄ intermediate transforms into NH₄Cu(OH)(H₂O)₂MoO₄, which loses two waters and yields [NH₄Cu(OH)MoO₄]. Upon heating, both [Cu(NH₃)₄]MoO₄ and [Cu(NH₃)(H₂O)₃]MoO₄ decompose, losing three NH₃ and three H₂O ligands, respectively, and stable [Cu(NH₃)MoO₄] is formed from both. The latter can partially be hydrated in boiling water into [NH₄Cu(OH)MoO₄. This compound can also be prepared in pure form by boiling the saturated aqueous solution of [Cu(NH₃)₄]MoO₄. All properties of [NH₄Cu(OH)MoO₄] match those of the active photocatalyst described earlier in the literature under the formulas (NH₄)₂[Cu(MoO₄)₂] and (NH₄)₂Cu₄(NH₃)₃Mo₅O₂₀.