Design, Construction, and Initial Results of a Prototype Multi-Contrast X-Ray Breast Imaging System

Dual Energy Differential Phase Contrast CT (DE-DPC-CT) Imaging

When more than two elemental materials are present in a given object, material quantification may not be robust and accurate when the routine two-material decomposition scheme in current dual energy CT imaging is employed. In this work, we present an innovative scheme to accomplish accurate three-material decomposition with measurements from a dual energy differential phase contrast CT (DE-DPC-CT) acquisition. A DE-DPC-CT system was constructed using a grating interferometer and a photon counting CT imaging system with two energy bins. The DE-DPC-CT system can simultaneously measure both the imaginary and the real part of the complex refractive index to enable a three-material decomposition. Physical phantom with 21 material inserts were constructed and measured using DE-DPC-CT system. Results demonstrated excellent accuracy in elemental material quantification. For example, relative root-mean-square errors of 4.5% for calcium and 5.2% for iodine were achieved using the proposed three-material decomposition scheme. Biological tissues with iodine inserts were used to demonstrate the potential utility of the proposed spectral CT imaging method. Experimental results showed that the proposed method correctly differentiates the bony structure, iodine, and the soft tissue in the biological specimen samples. A triple spectra CT scan was also performed to benchmark the performance of the DE-DPC-CT scan. Results demonstrated that the material decomposition from the DE-DPC-CT has a much lower quantification noise than that from the triple spectra CT scan.

Fast acquisition with seamless stage translation (FASST) for a trimodal x-ray breast imaging system

PURPOSE

A major technical obstacle to bringing x-ray multicontrast (i.e., attenuation, phase, and dark-field) imaging methodology to clinical use is the prolonged data acquisition time caused by the phase stepping procedure. The purpose of this work was to introduce a fast acquisition with seamless stage translation (FASST) technique to a prototype multicontrast breast imaging system for reduced image acquisition time that is clinically acceptable.

METHODS

The prototype system was constructed based on a Hologic full-field digital mammography + digital breast tomosynthesis combination system. During each FASST acquisition process, a motorized stage holding a diffraction grating travels continuously with a constant velocity, and a train of 15 short x-ray pulses (35 ms each) was delivered by using the Zero-Degree Tomo mode of the Hologic system. Standard phase retrieval was applied to the 15 subimages without spatial interpolation to avoid spatial resolution loss. The method was evaluated using a physical phantom, a bovine udder specimen, and a freshly resected mastectomy specimen. The FASST technique was experimentally compared with single-shot acquisition methods and the standard phase stepping method.

RESULTS

The image acquisition time of the proposed method is 3.7 s. In comparison, conventional phase stepping took 105 s using the same prototype imaging system. The mean glandular dose of both methods was matched at 1.3 mGy. No artifacts or spatial resolution loss was observed in images produced by FASST. In contrast, the single-shot methods led to spatial resolution loss and residual moiré artifacts.

CONCLUSIONS

The FASST technique reduces the data acquisition time of the prototype multicontrast x-ray breast imaging system to 3.7 s, such that it is comparable to a clinical digital breast tomosynthesis exam.

Design optimization of a periodic microstructured array anode for hard x-ray grating interferometry

Talbot-Lau grating interferometer (TLGI) has great advantages in x-ray imaging contrasts, especially for low-Z materials, over conventional absorption contrast. A microstructured array anode target (MAAT) source offers significantly higher imaging throughput than the combination of an extended x-ray source paired with an absorption grating (also known as source grating). The performance of the MAAT source can be optimized with respect to the areal density, dimensions, and choice of material for the microstructured metal inserts (MMI) and the substrate in which they are embedded. In this paper, we analyze the x-ray generation efficiency per incident electron, relative fraction of x-rays generated by MMI and substrate, x-ray spectrum, and angular distribution via Monte Carlo simulation. Based on the simulation results, the optimal parameters are obtained for a MAAT with incident electron energies from 30 keV to 120 keV. The corresponding temperature distribution within the MAAT is also simulated for the optimal set of the parameters via finite element analysis. As demonstrated by the thermal analysis data, the maximum allowable electron-beam power loading was derived that allows a stable operation of the transmission MAAT.

Human-Compatible Multi-Contrast Mammographic Prototype System

In the past decade, grating-based x-ray multi-contrast imaging has demonstrated potential advantages for breast imaging, including reduced anatomical noise, sharper tumor boundary and improved visibility of microcalcifications. However, most of the studies have been performed on benchtop-based systems. The experimental conditions including the dose, scanning time and system geometry may not meet clinical standards. Therefore, to evaluate true clinical benefits of grating-based multi-contrast breast imaging, in-vivo imaging should be performed, which requires a human-compatible system. The purpose of this paper is to report the development of a human-compatible prototype multi-contrast imaging system. In particular, this work focuses on several key challenges in building the prototype system. Regarding the challenge of patient safety, the mean glandular dose (MGD) and the scatter radiation were evaluated for the prototype system. Regarding the challenge of the limited field-of-view (FOV), the origin of the problem and corresponding technical solutions are presented. Finally, imaging results of several test phantoms are presented and strategies to improve the image quality are discussed.