Transforming UTE-mDixon MR Abdomen-Pelvis Images Into CT by Jointly Leveraging Prior Knowledge and Partial Supervision

Computed tomography (CT) provides information for diagnosis, PET attenuation correction (AC), and radiation treatment planning (RTP). Disadvantages of CT include poor soft tissue contrast and exposure to ionizing radiation. While MRI can overcome these disadvantages, it lacks the photon absorption information needed for PET AC and RTP. Thus, an intelligent transformation from MR to CT, i.e., the MR-based synthetic CT generation, is of great interest as it would support PET/MR AC and MR-only RTP. Using an MR pulse sequence that combines ultra-short echo time (UTE) and modified Dixon (mDixon), we propose a novel method for synthetic CT generation jointly leveraging prior knowledge as well as partial supervision (SCT-PK-PS for short) on large-field-of-view images that span abdomen and pelvis. Two key machine learning techniques, i.e., the knowledge-leveraged transfer fuzzy c-means (KL-TFCM) and the Laplacian support vector machine (LapSVM), are used in SCT-PK-PS. The significance of our effort is threefold: 1) Using the prior knowledge-referenced KL-TFCM clustering, SCT-PK-PS is able to group the feature data of MR images into five initial clusters of fat, soft tissue, air, bone, and bone marrow. Via these initial partitions, clusters needing to be refined are observed and for each of them a few additionally labeled examples are given as the partial supervision for the subsequent semi-supervised classification using LapSVM; 2) Partial supervision is usually insufficient for conventional algorithms to learn the insightful classifier. Instead, exploiting not only the given supervision but also the manifold structure embedded primarily in numerous unlabeled data, LapSVM is capable of training multiple desired tissue-recognizers; 3) Benefiting from the joint use of KL-TFCM and LapSVM, and assisted by the edge detector filter based feature extraction, the proposed SCT-PK-PS method features good recognition accuracy of tissue types, which ultimately facilitates the good transformation from MR images to CT images of the abdomen-pelvis. Applying the method on twenty subjects' feature data of UTE-mDixon MR images, the average score of the mean absolute prediction deviation (MAPD) of all subjects is 140.72 ± 30.60 HU which is statistically significantly better than the 241.36 ± 21.79 HU obtained using the all-water method, the 262.77 ± 42.22 HU obtained using the four-cluster-partitioning (FCP, i.e., external-air, internal-air, fat, and soft tissue) method, and the 197.05 ± 76.53 HU obtained via the conventional SVM method. These results demonstrate the effectiveness of our method for the intelligent transformation from MR to CT on the body section of abdomen-pelvis.

UTE-mDixon-based thorax synthetic CT generation

PURPOSE

Accurate photon attenuation assessment from MR data remains an unmet challenge in the thorax due to tissue heterogeneity and the difficulty of MR lung imaging. As thoracic tissues encompass the whole physiologic range of photon absorption, large errors can occur when using, for example, a uniform, water-equivalent or a soft-tissue-only approximation. The purpose of this study was to introduce a method for voxel-wise thoracic synthetic CT (sCT) generation from MR data attenuation correction (AC) for PET/MR or for MR-only radiation treatment planning (RTP).

METHODS

Acquisition: A radial stack-of-stars combining ultra-short-echo time (UTE) and modified Dixon (mDixon) sequence was optimized for thoracic imaging. The UTE-mDixon pulse sequence collects MR signals at three TE times denoted as UTE, Echo1, and Echo2. Three-point mDixon processing was used to reconstruct water and fat images. Bias field correction was applied in order to avoid artifacts caused by inhomogeneity of the MR magnetic field.

ANALYSIS

Water fraction and R2* maps were estimated using the UTE-mDixon data to produce a total of seven MR features, that is UTE, Echo1, Echo2, Dixon water, Dixon fat, Water fraction, and R2*. A feature selection process was performed to determine the optimal feature combination for the proposed automatic, 6-tissue classification for sCT generation. Fuzzy c-means was used for the automatic classification which was followed by voxel-wise attenuation coefficient assignment as a weighted sum of those of the component tissues. Performance evaluation: MR data collected using the proposed pulse sequence were compared to those using a traditional two-point Dixon approach. Image quality measures, including image resolution and uniformity, were evaluated using an MR ACR phantom. Data collected from 25 normal volunteers were used to evaluate the accuracy of the proposed method compared to the template-based approach. Notably, the template approach is applicable here, that is normal volunteers, but may not be robust enough for patients with pathologies.

RESULTS

The free breathing UTE-mDixon pulse sequence yielded images with quality comparable to those using the traditional breath holding mDixon sequence. Furthermore, by capturing the signal before T2* decay, the UTE-mDixon image provided lung and bone information which the mDixon image did not. The combination of Dixon water, Dixon fat, and the Water fraction was the most robust for tissue clustering and supported the classification of six tissues, that is, air, lung, fat, soft tissue, low-density bone, and dense bone, used to generate the sCT. The thoracic sCT had a mean absolute difference from the template-based (reference) CT of less than 50 HU and which was better agreement with the reference CT than the results produced using the traditional Dixon-based data.

CONCLUSION

MR thoracic acquisition and analyses have been established to automatically provide six distinguishable tissue types to generate sCT for MR-based AC of PET/MR and for MR-only RTP.