An electrically pumped phonon-polariton laser

Mechanical Control of Polaritonic States in Lead Halide Perovskite Phonons Strongly Coupled in THz Microcavity

We demonstrate the generation and control of polaritonic states in perovskite phonon polaritons, which are strongly coupled in the middle of a flexible Fabry-Perot cavity. We fabricated flexible perovskite films on a microporous substrate coated with graphene oxide, which led to a virtually free-standing film incorporated into the microcavity. Rabi splitting was observed when the cavity resonance was in tune with that of the phonons. The Rabi splitting energy increased as the film thickness increased, reaching 1.9 meV, which is 2.4-fold higher than the criterion for the strong coupling regime. We obtained dispersion curves for various perovskite film thicknesses exhibiting two polariton branches; clear beats between the two polaritonic branches were observed in the time domain. Flexible cavity devices with perovskite phonons enable macroscopic control over the polaritonic energy states through bending processes, which add an additional degree of freedom in the manipulation of polaritonic devices.

Phonon Polaritonics in Broad Terahertz Frequency Range with Quantum Paraelectric SrTiO3

Photonics in the frequency range of 5-15 terahertz (THz) potentially open a new realm of quantum materials manipulation and biosensing. This range, sometimes called "the new terahertz gap", is traditionally difficult to access due to prevalent phonon absorption bands in solids. Low-loss phonon-polariton materials may realize sub-wavelength, on-chip photonic devices, but typically operate in mid-infrared frequencies with narrow bandwidths and are difficult to manufacture on a large scale. Here, for the first time, quantum paraelectric SrTiO3 enables broadband surface phonon-polaritonic devices in 7-13 THz. As a proof of concept, polarization-independent field concentrators are designed and fabricated to locally enhance intense, multicycle THz pulses by a factor of 6 and increase the spectral intensity by over 90 times. The time-resolved electric field inside the concentrators is experimentally measured by THz-field-induced second harmonic generation. Illuminated by a table-top light source, the average field reaches 0.5 GV m-1 over a large volume resolvable by far-field optics. These results potentially enable scalable THz photonics with high breakdown fields made of various commercially available phonon-polariton crystals for studying driven phases in quantum materials and nonlinear molecular spectroscopy.

Polaritons in Van der Waals Heterostructures

2D monolayers supporting a wide variety of highly confined plasmons, phonon polaritons, and exciton polaritons can be vertically stacked in van der Waals heterostructures (vdWHs) with controlled constituent layers, stacking sequence, and even twist angles. vdWHs combine advantages of 2D material polaritons, rich optical structure design, and atomic scale integration, which have greatly extended the performance and functions of polaritons, such as wide frequency range, long lifetime, ultrafast all-optical modulation, and photonic crystals for nanoscale light. Here, the state of the art of 2D material polaritons in vdWHs from the perspective of design principles and potential applications is reviewed. Some fundamental properties of polaritons in vdWHs are initially discussed, followed by recent discoveries of plasmons, phonon polaritons, exciton polaritons, and their hybrid modes in vdWHs. The review concludes with a perspective discussion on potential applications of these polaritons such as nanophotonic integrated circuits, which will benefit from the intersection between nanophotonics and materials science.

Phonon-Related Monochromatic THz Radiation and its Magneto-Modulation in 2D Ferromagnetic Cr2 Ge2 Te6

Searching multiple types of terahertz (THz) irradiation source is crucial for the THz technology. In addition to the conventional fermionic cases, bosonic quasi-/particles also promise energy-efficient THz wave emission. Here, by utilizing a 2D ferromagnetic Cr2 Ge2 Te6 crystal, first a phonon-related magneto-tunable monochromatic THz irradiation source is demonstrated. With a low-photonic-energy broadband THz pump, a strong THz irradiation with frequency ≈0.9 THz and bandwidth ≈0.25 THz can be generated and its conversion efficiency could even reach 2.1% at 160 K. Moreover, it is intriguing to find that such monochromatic THz irradiation can be efficiently modulated by external magnetic field below 160 K. According to both experimental and theoretical analyses, the emergent THz irradiation is identified as the emission from the phonon-polariton and its temperature and magnetic field dependent behaviors confirm the large spin-lattice coupling in this 2D ferromagnetic crystal. These observations provide a new route for the creation of tunable monochromatic THz source which may have great practical interests in future applications in photonic and spintronic devices.

Coherent control of interlayer vibrations in Bi2Se3 van der Waals thin-films

Interlayer vibrations with discrete quantized modes in two-dimensional (2D) materials can be excited by ultrafast light due to the inherent low dimensionality and van der Waals force as a restoring force. Controlling such interlayer vibrations in layered materials, which are closely related to fundamental nanomechanical interactions and thermal transport, in spatial- and time-domain provides an in-depth understanding of condensed matters and potential applications for advanced phononic and photonics devices. The manipulation of interlayer vibrational modes has been implemented in a spatial domain through material design to develop novel optoelectronic and phononic devices with various 2D materials, but such control in a time domain is still lacking. We present an all-optical method for controlling the interlayer vibrations in a highly precise manner with Bi₂Se₃ as a promising optoelectronic and thermoelasticity material in layered structures using a coherently controlled pump and probe scheme. The observed thickness-dependent fast interlayer breathing modes and substrate-induced slow interfacial modes can be exactly explained by a modified linear chain model including coupling effect with substrate. In addition, the results of coherent control experiments also agree with the simulation results based on the interference of interlayer vibrations. This investigation is universally applicable for diverse 2D materials and provides insight into the interlayer vibration-related dynamics and novel device implementation based on an ultrafast timescale interlayer-spacing modulation scheme.

Microcavity phonon polaritons from the weak to the ultrastrong phonon-photon coupling regime

Strong coupling between molecular vibrations and microcavity modes has been demonstrated to modify physical and chemical properties of the molecular material. Here, we study the less explored coupling between lattice vibrations (phonons) and microcavity modes. Embedding thin layers of hexagonal boron nitride (hBN) into classical microcavities, we demonstrate the evolution from weak to ultrastrong phonon-photon coupling when the hBN thickness is increased from a few nanometers to a fully filled cavity. Remarkably, strong coupling is achieved for hBN layers as thin as 10 nm. Further, the ultrastrong coupling in fully filled cavities yields a polariton dispersion matching that of phonon polaritons in bulk hBN, highlighting that the maximum light-matter coupling in microcavities is limited to the coupling strength between photons and the bulk material. Tunable cavity phonon polaritons could become a versatile platform for studying how the coupling strength between photons and phonons may modify the properties of polar crystals.

Strong coupling between light and matter can be engineered to influence their properties and behaviour. Here, the authors demonstrate the evolution from weak to ultrastrong coupling of microcavity modes and optical phonons with hexagonal boron nitride layers in a Fabry-Perot resonator.

Enhanced Interaction of Optical Phonons in h-BN with Plasmonic Lattice and Cavity Modes

Hexagonal boron nitride (h-BN) is regarded as a milestone in the investigation of light interaction with phonon polaritons in two-dimensional van der Waals materials, showing significant potential in novel and high-efficient photonics devices in the mid-infrared region. Here, we investigate a structure composed of Au-grating arrays fabricated onto a Fabry-Perot (FP) cavity composed of h-BN, Ge, and Au back-reflector layers. The plasmonic FP cavity reduces the required device thickness by enhancing modal interactions and introduces in-plane polarization sensitivity based on the Au array lattice. Our experiments show multiple absorption peaks of over 90% in the mid-infrared region and the band stop filters with 80% efficiency using only a 15 nm h-BN slab. Moreover, mode interaction with experimental coupling strengths as high as 10.8 meV in the mid-infrared region is investigated. In particular, the interaction and hybridization of optical phonon modes with plasmonic modes including the lattice and cavity modes are studied. Anticrossing splitting ascribed to the coupling of optical phonons to plasmonic modes can be tuned by the designed geometry which can be tailored to efficient response band engineering for infrared photonics. We also show that in practical applications involving wet transfer of h-BN thin films, the contribution of minor optical phonon modes to resonant peaks should not be ignored, which originate from defects and multicrystallinity in the h-BN slab. Our findings provide a favorable complement to manipulation of light-phonon interaction, inspiring a promising design of phonon-based nanophotonic devices in the infrared range.

A single microwire near-infrared exciton-polariton light-emitting diode

Exciton-polaritons, which originate from the strong coupling between photon modes of microresonators and excitons in semiconductor micro-/nanostructures, have drawn much attention due to their significance for fabricating coherent light sources which possess considerably lower emission thresholds. In this study, an exciton-polariton light-emitting diode (LED), made from a Ga-doped ZnO microwire (ZnO:Ga MW) and a p-GaAs template serving as the hole supplier, is fabricated. The n-ZnO:Ga MW/p-GaAs heterojunction device can emit light with a near-infrared wavelength of 880 nm and a narrow line width of about 60 nm. Due to the high quality whispering gallery mode (WGM) microcavities which are naturally self-constructed by the hexagon-shaped MW, the electroluminescence (EL) spectrum resolves into a series of resonance peaks which can be assigned to exciton-polariton features, leading to the strong coupling of the exciton and the WGM photon in the as-fabricated LED. The strong exciton-photon coupling is clearly evidenced via angle-resolved EL measurements, with the Rabi splitting energy extracted as 160 meV. Furthermore, by adjusting the size of the WGM microcavity structure naturally formed by the hexagonal MWs, particularly by adjusting the diameter of the wires, the exciton-polariton coupling strength in the single MW based LEDs can be tuned, with the as-extracted Rabi splitting energy varying in the range of 92-294 meV. The realization of a single MW based LED, which shows exciton-polariton behavior from a built-in optical microresonator, can enable a promising route for the future fabrication of polariton emitters, where the device performance no longer suffers from obstacles including the need for additional optical resonators, large lattice mismatch, and template availability.

An electrically driven single microribbon based near-infrared exciton–polariton light-emitting diode

An electrically driven exciton–polariton NIR-LED involving an n-ZnO:Ga microribbon/p-GaAs heterojunction was achieved. The Rabi splitting is measured to be 109 meV.

Phonon-Polaritons in Lead Halide Perovskite Film Hybridized with THz Metamaterials

In this work, we demonstrated a phonon-polariton in the terahertz (THz) frequency range, generated in a crystallized lead halide perovskite film coated on metamaterials. When the metamaterial resonance was in tune with the phonon resonance of the perovskite film, Rabi splitting occurred due to the strong coupling between the resonances. The Rabi splitting energy was about 1.1 meV, which is larger than the metamaterial and phonon resonance line widths; the interaction potential estimation confirmed that the strong coupling regime was reached successfully. We were able to tune the polaritonic branches by varying the metamaterial resonance, thereby obtaining the dispersion curve with a clear anticrossing behavior. Additionally, we performed in situ THz spectroscopy as we annealed the perovskite film and studied the Rabi splitting as a function of the films' crystallization coverage. The Rabi splitting versus crystallization volume fraction exhibited a unique power-law scaling, depending on the crystal growth dimensions.