Nanoscale optical pulse limiter enabled by refractory metallic quantum wells

All-optical modulator with photonic topological insulator made of metallic quantum wells

All-optical modulators hold significant prospects for future information processing technologies for they are able to process optical signals without the electro-optical convertor which limits the achievable modulation bandwidth. However, owing to the hardly-controlled optical backscattering in the commonly-used device geometries and the weak optical nonlinearities of the conventional material systems, constructing an all-optical modulator with a large bandwidth and a deep modulation depth in an integration manner is still challenging. Here, we propose an approach to achieving an on-chip ultrafast all-optical modulator with ultra-high modulation efficiency and a small footprint by using photonic topological insulators (PTIs) made of metallic quantum wells (MQWs). Since PTIs have attracted significant attention because of their unidirectional propagating edge states, which mitigate optical backscattering caused by structural imperfections or defects. Meanwhile, MQWs have shown a large Kerr nonlinearity, facilitating the development of minimally sized nonlinear optical devices including all-optical modulators. The proposed photonic topological modulator shows a remarkable modulation depth of 15 dB with a substantial modulation bandwidth above THz in a tiny footprint of only 4 × 10 µm2, which manifests itself as one of the most compact optical modulators compared with the reported ones possessing a bandwidth above 100 GHz. Such a high-performance optical modulator could enable new functionalities in future optical communication and information processing systems.

Giant optical second- and third-order nonlinearities at a telecom wavelength

A material platform that excels in both optical second- and third-order nonlinearities at a telecom wavelength is theoretically and experimentally demonstrated. In this TiN-based coupled metallic quantum well structure, electronic subbands are engineered to support doubly resonant inter-subband transitions for an exceptionally high second-order nonlinearity and provide single-photon transitions for a remarkable third-order nonlinearity within the 1400-1600 nm bandwidth. The second-order susceptibility χ(2) reaches 2840 pm/V at 1440 nm, while the Kerr coefficient n2 arrives at 2.8 × 10-10 cm2/W at 1460 nm. The achievement of simultaneous strong second- and third-order nonlinearities in one material at a telecom wavelength creates opportunities for multi-functional advanced applications in the field of nonlinear optics.

Perfect absorption based on a ceramic anapole metamaterial

Metamaterials, from concept to application level, is currently a high-trending topic. Due to the strict requirements of the simultaneous reasonable structural design and stability of materials, the construction of a high-performance metamaterial for extreme environments is still difficult. Here, combining metamaterial design with materials optimization, we propose a completely different strategy and synthesize a type of monomeric ceramic meta-atom to construct metamaterials. Based on a geometric design with multiple degrees of freedom and dielectric properties, hybrid anapole modes with impedance matching can be produced, experimentally inducing nearly perfect absorption with high temperature stability (high tolerable temperature of approximately 1300 °C, with almost zero temperature drift) in microwave/millimeter-wave bands. We surpass the oxidation temperature limitation of 800 °C in conventional plasmonic absorbers, and provide an unprecedented direction for the further development of integrated high-performance metamaterial wireless sensors responding to extreme environmental scenarios, which will also lead to a new direction of specific ceramic research toward device physics.

Ultrathin Layered Hyperbolic Metamaterial-Assisted Illumination Nanoscopy

Metamaterial-assisted illumination nanoscopy (MAIN) has been proven to be a promising approach for super-resolution microscopy with up to a 7-fold improvement in imaging resolution. Further resolution enhancement is possible in principle, however, has not yet been demonstrated due to the lack of high-quality ultrathin layered hyperbolic metamaterials (HMMs) used in the MAIN. Here, we fabricate a low-loss composite HMM consisting of high-quality bilayers of Al-doped Ag and MgO with a nominal thickness of 2.5 nm, and then use it to demonstrate an ultrathin layered hyperbolic metamaterial-assisted illumination nanoscopy (ULH-MAIN) with a 14-fold imaging resolution improvement. This improvement of resolution is achieved in fluorescent beads super-resolution experiments and verified with scanning electron microscopy. The ULH-MAIN presents a simple super-resolution imaging approach that offers distinct benefits such as low illumination power, low cost, and a broad spectrum of selectable probes, making it ideal for dynamic imaging of life science samples.

Low power threshold, ultrathin optical limiter based on a nonlinear zone plate

Ultrathin optical limiters are needed to protect light sensitive components in miniaturized optical systems. However, it has proven challenging to achieve a sufficiently low optical limiting threshold. In this work, we theoretically show that an ultrathin optical limiter with low threshold intensity can be realized using a nonlinear zone plate. The zone plate is embedded with nonlinear saturable absorbing materials that allow the device to focus low intensity light, while high intensity light is transmitted as a plane wave without a focal spot. Based on this proposed mechanism, we use the finite-difference time-domain method to computationally design a zone plate embedded with InAs quantum dots as the saturable absorbing material. The device has a thickness of just 0.5 μm and exhibits good optical limiting behavior with a threshold intensity as low as 0.45 kW/cm², which is several orders of magnitude lower than bulk limiter counterparts based on a similar mechanism, and also performs favorably compared to current ultrathin flat-optics-based optical limiters. This design can be optimized for different operating wavelengths and threshold intensities by using different saturable absorbing materials. Additionally, the diameter and focal length of the nonlinear zone plate can be easily adjusted to fit different systems and applications. Due to its flexible design, low power threshold, and ultrathin thickness, this optical limiting concept may be promising for application in miniaturized optical systems.

Diffraction-limited broadband optical meta-power-limiter

In recent years, the need for a high-power laser has been of great interest for different applications, including direct-laser processing, light detection, medicine, and lighting. However, high-power lasers with high intensities give rise to fundamental problems for optical detectors and imaging systems with low threshold damage, which still need reliable solutions. Here we report and numerically demonstrate a hybrid system that synergistically combines a broadband OPL with a transmittance difference between on-state (70°C) and off-state (25°C) about 62.5%, and a diffraction-limited broadband metalens from 1534 to 1664 nm. Such a metalens power limiter could be used in any system requiring an intermediate focal plane in the optical path to the detector from damage by exposure to high-intensity lasers.

The Substituent-Induced Symmetry-Forbidden Electronic Transition Allows Significant Optical Limiting under Weak Sky-Blue Irradiance

We report a novel material containing a rare metal-free dopant chromophore with controlled electronic symmetry, which exhibits strong optical limiting (OL) capabilities under weak, continuous, sky-blue irradiance. Electron-donating substituents at positions C2 and C7 of pyrene allow significant triplet generation because of the symmetrically forbidden transition between the ground state and the lowest singlet excited state, which leads to accumulation of triplet excitons in the dopant chromophore. This also leads to a small ground state absorption coefficient and induces greater absorption of sky-blue wavelengths when triplet excitons of the chromophore accumulate. Consequently, molecular glass doped with the designed chromophore displays stronger OL characteristics compared with those of the rare element-containing glass that previously demonstrated the greatest OL performance under continuous sky-blue irradiance at sunlight power levels. The described approach to developing cost-effective, state-of-the-art OL materials is crucial for nonlinear optical applications working at a large scale under sunlight or room lights.