A combined molecular dynamics and experimental study of two-step process enabling low-temperature formation of phase-pure α-FAPbI3

A Catalyst-Like System Enables Efficient Perovskite Solar Cells

High-quality perovskite films are essential for achieving high performance of optoelectronic devices; However, solution-processed perovskite films are known to suffer from compositional and structural inhomogeneity due to lack of systematic control over the kinetics during the formation. Here, the microscopic homogeneity of perovskite films is successfully enhanced by modulating the conversion reaction kinetics using a catalyst-like system generated by a foaming agent. The chemical and structural evolution during this catalytic conversion is revealed by a multimodal synchrotron toolkit with spatial resolutions spanning many length scales. Combining these insights with computational investigations, a cyclic conversion pathway model is developed that yields exceptional perovskite homogeneity due to enhanced conversion, having a power conversion efficiency of 24.51% for photovoltaic devices. This work establishes a systematic link between processing of precursor and homogeneity of the perovskite films.

In Situ-Grown 2D Perovskite Based on π-Conjugated Aggregation-Induced Emission Organic Spacer Boosting the Efficiency and Stability of 2D-3D Heterostructured Perovskite Solar Cells

The two-dimensional-three-dimensional (2D-3D) heterostructured perovskite solar cells (PSCs) have drawn widespread interest, wherein the organic spacer plays a significant role in the photovoltaic performance. Herein, a novel π-conjugated organic spacer with the aggregation-induced emission (AIE) property, (Z)-2-([1,1'-biphenyl]-4-yl)-3-(5-(4-(3-aminopropoxy)phenyl)thiophen-2-yl)acrylonitrile (BPCSA-S), is designed and synthesized, which is successfully applied for the in situ construction of 2D-3D heterostructured PSCs via the two-step solution method. By virtue of the functional groups (i.e., cyano, thiophene, and amino) in BPCSA-S, the BPCSA-S organic spacer can trigger the in situ growth of 2D perovskites, which will serve as the template for the heteroepitaxial growth of 3D perovskites, thus obtaining a 2D-3D heterostructured film with high-quality and few defects. More pleasingly, benefiting from the AIE property and delocalized π-electrons in the π-conjugated BPCSA-S organic spacer, excellent photosensitization process and carrier transport can be achieved. Consequently, the resultant 2D-3D heterostructured PSCs yield a pleasing PCE of 22.07%, accompanied by mitigatory hysteresis, as well as enhanced stability. Our research shows a hopeful multifunctional organic spacer approach using the novel π-conjugated AIE organic spacer for high-performance PSCs.

Two-Stage Dynamic Transformation from δ- to α-CsPbI3

The phase transformation from δ- to α-CsPbI3has garnered extensive research interest. However, detailed understanding of this structural transformation at atomistic scale remains elusive. Here, we reported the full atomistic molecular dynamics simulation of this important phase transformation using an enhanced sampling method, Metadynamics (MetaD). Particularly, two-stage of dynamic transformation related to [PbI3]- chains' motions was observed, namely, the intrachain rearrangement followed by interchain connection. Moreover, the dynamic motion of Cs+ cations plays an important role in facilitating the interchain connection kinetically. The insights reported in this work will provide valuable guidance for further advancing the understanding of phase transformation of CsPbI3.

Toward stabilization of formamidinium lead iodide perovskites by defect control and composition engineering

Phase instability poses a serious challenge to the commercialization of formamidinium lead iodide (FAPbI3)-based solar cells and optoelectronic devices. Here, we combine density functional theory and machine learning molecular dynamics simulations, to investigate the mechanism driving the undesired α-δ phase transition of FAPbI3. Prevalent iodine vacancies and interstitials can significantly expedite the structural transition kinetics by inducing robust covalency during transition states. Extrinsically, the detrimental roles of atmospheric moisture and oxygen in degrading the FAPbI3 perovskite phase are also rationalized. Significantly, we discover the compositional design principles by categorizing that A-site engineering primarily governs thermodynamics, whereas B-site doping can effectively manipulate the kinetics of the phase transition in FAPbI3, highlighting lanthanide ions as promising B-site substitutes. A-B mixed doping emerges as an efficient strategy to synergistically stabilize α-FAPbI3, as experimentally demonstrated by substantially higher initial optoelectronic characteristics and significantly enhanced phase stability in Cs-Eu doped FAPbI3 as compared to its Cs-doped counterpart. This study provides scientific guidance for the design and optimization of long-term stable FAPbI3-based solar cells and other optoelectronic devices through defect control and synergetic composition engineering.

Magnetic-biased chiral molecules enabling highly oriented photovoltaic perovskites

The interaction between sites A, B and X with passivation molecules is restricted when the conventional passivation strategy is applied in perovskite (ABX3) photovoltaics. Fortunately, the revolving A-site presents an opportunity to strengthen this interaction by utilizing an external field. Herein, we propose a novel approach to achieving an ordered magnetic dipole moment, which is regulated by a magnetic field via the coupling effect between the chiral passivation molecule and the A-site (formamidine ion) in perovskites. This strategy can increase the molecular interaction energy by approximately four times and ensure a well-ordered molecular arrangement. The quality of the deposited perovskite film is significantly optimized with inhibited nonradiative recombination. It manages to reduce the open-circuit voltage loss of photovoltaic devices to 360 mV and increase the power conversion efficiency to 25.22%. This finding provides a new insight into the exploration of A-sites in perovskites and offers a novel route to improving the device performance of perovskite photovoltaics.

Atomic Structure and Dynamics of Organic-Inorganic Hybrid Perovskite Formamidinium Lead Iodide

The atomic dynamic behaviors of formamidinium lead iodide [HC(NH2)2PbI3] are critical for understanding and improving photovoltaic performances. However, they remain unclear. Here, we investigate the structural phase transitions and the reorientation dynamics of the formamidinium cation [HC(NH2)2+, FA+] of FAPbI3 using neutron scattering techniques. Two structural phase transitions occur with decreasing temperature, from cubic to tetragonal phase at 285 K and then to another tetragonal at 140 K, accompanied by gradually frozen reorientation of FA cations. The nearly isotropic reorientation in the cubic phase is suppressed to reorientation motions involving a two-fold (C2) rotation along the N···N axis and a four-fold (C4) rotation along the C-H axis in the tetragonal phase, and eventually to local disordered motion as a partial C4 along the C-H axis in another tetragonal phase, thereby indicating an intimate interplay between lattice and orientation degrees of freedom in the hybrid perovskite materials. The present complete atomic structure and dynamics provide a solid standing point to understand and then improve photovoltaic properties of organic-inorganic hybrid perovskites in the future.

MASCN Surface Treatment to Reduce Phase Transition Temperature and Regulate Strain for Efficient and Stable α-FAPbI3 Perovskite Solar Cells

The fabrication of α-FAPbI3 perovskite films usually requires high temperature annealing above 150 °C, and the residual tensile strain in the films seriously affects the stability of α-FAPbI3 by converting to δ-phase FAPbI3. Here, we use MASCN surface treatment of FAPbI3 films to induce a rotation of the coplanar octahedron [PbI6]4- to the metric octahedron for the strong interaction of SCN- with Pb2+, converting δ-FAPbI3 into α-FAPbI3 highly crystalline films at room temperature. The optimized FAPbI3 films have high stability due to releasing residual tensile strains after MASCN treatment. The efficiency of the MASCN-treated unannealed FAPbI3 PSC is 19.03%, while the optimized FAPbI3 annealed at 100 °C shows a maximum PCE of 21.95% on a small area. The solar cell stability for humidity, light, and thermal stability are significantly improved. The MASCN treated FAPbI3 achieves a PCE of 15.32% on a PSC module with an effective area of 9.6 cm2 and maintains an initial efficiency of 94.1% after 100 days of ageing at 85 °C and 85% humidity.

Anisotropic Collective Variables with Machine Learning Potential for Ab Initio Crystallization of Complex Ceramics

Enhanced sampling molecular dynamics (MD) simulations have been extensively used in the phase transition study of simple crystalline materials, such as aluminum, silica, and ice. However, MD simulation of the crystallization process for complex crystalline materials still faces a formidable challenge due to their multicomponent induced multiphase problem. Here, we realize the ab initio accuracy MD crystallization simulations of complex ceramics by using anisotropic collective variables (CVs) and machine learning (ML) potential. The anisotropic X-ray diffraction intensity CVs provide precise identification of complex crystal structures with detailed crystallography information, while the ML potential makes it feasible to further perform enhanced sampling simulations with ab initio accuracy. We verify the universality and accuracy of this method through complex ceramics with three kinds of representative structures, i.e., Ti3SiC2 for the MAX structure, zircon for the mineral structure, and lead zirconate titanate for the perovskite structure. It demonstrates exceptional efficiency and ab initio quality in achieving crystallization and generating free energy surfaces of all these ceramics, facilitating the analysis and design of complex crystalline materials.

Dissolved-Cl2 triggered redox reaction enables high-performance perovskite solar cells

Constructing 2D/3D perovskite heterojunctions is effective for the surface passivation of perovskite solar cells (PSCs). However, previous reports that studying perovskite post-treatment only physically deposits 2D perovskite on the 3D perovskite, and the bulk 3D perovskite remains defective. Herein, we propose Cl₂-dissolved chloroform as a multifunctional solvent for concurrently constructing 2D/3D perovskite heterojunction and inducing the secondary growth of the bulk grains. The mechanism of how Cl₂ affects the performance of PSCs is clarified. Specifically, the dissolved Cl₂ reacts with the 3D perovskite, leading to Cl/I ionic exchange and Ostwald ripening of the bulk grains. The generated Cl^- further diffuses to passivate the bulk crystal and buried interface of PSCs. Hexylammonium bromide dissolved in the solvent reacts with the residual PbI₂ to form 2D/3D heterojunctions on the surface. As a result, we achieved high-performance PSCs with a champion efficiency of 24.21% and substantially improved thermal, ambient, and operational stability.

Improving Crystallization and Stability of Perovskite Solar Cells Using a Low-Temperature Treated A-Site Cation Solution in the Sequential Deposition

The two-step sequential deposition is a commonly used method by researchers for fabricating perovskite solar cells (PSCs) due to its reproducibility and tolerant preparation conditions. However, the less-than-favorable diffusive processes in the preparation process often result in subpar crystalline quality in the perovskite films. In this study, we employed a simple strategy to regulate the crystallization process by lowering the temperature of the organic-cation precursor solutions. By doing so, we minimized interdiffusion processes between the organic cations and pre-deposited lead iodide (PbI₂) film under poor crystallization conditions. This allowed for a homogenous perovskite film with improved crystalline orientation when transferred to appropriate environmental conditions for annealing. As a result, a boosted power conversion efficiency (PCE) was achieved in PSCs tested for 0.1 cm² and 1 cm², with the former exhibiting a PCE of 24.10% and the latter of 21.56%, compared to control PSCs, which showed a PCE of 22.65% and 20.69%, respectively. Additionally, the strategy increased device stability, with the cells holding 95.8% and 89.4% of the initial efficiency even after 7000 h of aging under nitrogen or 20-30% relative humidity and 25 °C. This study highlights a promising low-temperature-treated (LT-treated) strategy compatible with other PSCs fabrication techniques, adding a new possibility for temperature regulation during crystallization.

Intermediate Phase Engineering with 2,2-Azodi(2-Methylbutyronitrile) for Efficient and Stable Perovskite Solar Cells

Sequential deposition has been widely employed to modulate the crystallization of perovskite solar cells because it can avoid the formation of nucleation centers and even initial crystallization in the precursor solution. However, challenges remain in overcoming the incomplete and random transformation of PbI₂ films with organic ammonium salts. Herein, a unique intermediate phase engineering strategy has been developed by simultaneously introducing 2,2-azodi(2-methylbutyronitrile) (AMBN) to both PbI₂ and ammonium salt solutions to regulate perovskite crystallization. AMBN not only coordinates with PbI₂ to form a favorably mesoporous PbI₂ film due to the coordination between Pb²⁺ and the cyano group (C≡N), but also suppresses the vigorous activity of FA⁺ ions by interacting with FAI, leading to the full PbI₂ transformation with the preferred orientation. Therefore, perovskites with favorable facet orientations are obtained, and the defects are largely suppressed owing to the passivation of uncoordinated Pb²⁺ and FA⁺ . As a result, a champion power conversion efficiency over 25% with a stabilized efficiency of 24.8% is achieved. Moreover, the device exhibits an improved operational stability, retaining 96% of initial power conversion efficiency under 1000 h continuous white-light illumination with an intensity of 100 mW cm^-2 at ≈55 °C in N₂ atmosphere.

Collective Variables for Crystallization Simulations-from Early Developments to Recent Advances

Crystallization is an important physicochemical process which has relevance in material science, biology, and the environment. Decades of experimental and theoretical efforts have been made to understand this fundamental symmetry-breaking transition. While experiments provide equilibrium structures and shapes of crystals, they are limited to unraveling how molecules aggregate to form crystal nuclei that subsequently transform into bulk crystals. Computer simulations, mainly molecular dynamics (MD), can provide such microscopic details during the early stage of a crystallization event. Crystallization is a rare event that takes place in time scales much longer than a typical equilibrium MD simulation can sample. This inadequate sampling of the MD method can be easily circumvented by the use of enhanced sampling (ES) simulations. In most of the ES methods, the fluctuations of a system's slow degrees of freedom, called collective variables (CVs), are enhanced by applying a bias potential. This transforms the system from one state to the other within a short time scale. The most crucial part of such CV-based ES methods is to find suitable CVs, which often needs intuition and several trial-and-error optimization steps. Over the years, a plethora of CVs has been developed and applied in the study of crystallization. In this review, we provide a brief overview of CVs that have been developed and used in ES simulations to study crystallization from melt or solution. These CVs can be categorized mainly into four types: (i) spherical particle-based, (ii) molecular template-based, (iii) physical property-based, and (iv) CVs obtained from dimensionality reduction techniques. We present the context-based evolution of CVs, discuss the current challenges, and propose future directions to further develop effective CVs for the study of crystallization of complex systems.

Halide Perovskite Crystallization Processes and Methods in Nanocrystals, Single Crystals, and Thin Films

Halide perovskite semiconductors with extraordinary optoelectronic properties have been fascinatedly studied. Halide perovskite nanocrystals, single crystals, and thin films have been prepared for various fields, such as light emission, light detection, and light harvesting. High-performance devices rely on high crystal quality determined by the nucleation and crystal growth process. Here, the fundamental understanding of the crystallization process driven by supersaturation of the solution is discussed and the methods for halide perovskite crystals are summarized. Supersaturation determines the proportion and the average Gibbs free energy changes for surface and volume molecular units involved in the spontaneous aggregation, which could be stable in the solution and induce homogeneous nucleation only when the solution exceeds a required minimum critical concentration (C_min ). Crystal growth and heterogeneous nucleation are thermodynamically easier than homogeneous nucleation due to the existent surfaces. Nanocrystals are mainly prepared via the nucleation-dominated process by rapidly increasing the concentration over C_min , single crystals are mainly prepared via the growth-dominated process by keeping the concentration between solubility and C_min , while thin films are mainly prepared by compromising the nucleation and growth processes to ensure compactness and grain sizes. Typical strategies for preparing these three forms of halide perovskites are also reviewed.

The effect of CO2-doped spiro-OMeTAD hole transport layer on FA(1−x)CsxPbI3 perovskite solar cells

Black-phase formamidinium lead iodine with 1.48 eV bandgap is considered to be the most promising material for improving the near-theoretical limit efficiency of perovskite solar cells, but at room temperature, black-phase formamidinium lead iodine easily transforms into the yellow non-perovskite phase formamidinium lead iodine. Here, different ratios of Cs+-incorporated formamidinium lead iodine prepared by one-step processing with the stability and power conversion efficiency of formamidinium lead iodine perovskite solar cells are investigated. FA0.85Cs0.15PbI3 shows the highest power conversion efficiency of 10.63% (Voc = 1.04 V, Jsc = 16.81 mA cm−2, and fill factor = 0.60), and the unencapsulated device maintained 60% of the initial power conversion efficiency after storage in air with 40% humidity for 186 h with an active area of 0.1 cm2, when the ratios of Cs+ reached 15% ( x = 0.15) in formamidinium lead iodine. However, the efficiency of perovskite solar cell–based formamidinium lead iodine is still low. In this work, a simple but an effective strategy was carried out to rapidly and fully oxidize hole transport layer solution by doping CO2 or O2 under ultraviolet light irradiation to increase the conductivity of hole transport layer, thereby improving the power conversion efficiency of solar cells. The results show that FA0.85Cs0.15PbI3 solar cells by CO2-doped hole transport layer for 90 s exhibited the highest power conversion efficiency of 16.11% (VOC = 1.11 V, JSC = 19.73 mA cm−2, and fill factor = 0.74). The improved photovoltaic performance is attributed to CO2-doped spiro-OMeTAD increasing charge carrier density and accelerating charge separation, thereby inducing higher conductivity. CO2 or O2 doped can rapidly and fully oxidize spiro-OMeTAD, and reduce the solar cell fabrication time; it is beneficial to the commercial use of perovskite solar cells.

Balancing Lattice Strain by Embedded Ionic Liquid for the Stabilization of Formamidinium-Based Perovskite Solar Cells

Formamidinium (FA)-based perovskites remained state-of-the-art in the field of perovskite solar cells (PSCs) owing to the exceptional absorption and carrier transport properties, while the transition from photoactive (α-) to photoinactive (δ-FAPbI₃) phase is the impediment that causes performance degradation and thus limits the deployment of FA-based PSCs. The unfavorable phase transition originates from tensile strain in the FAPbI₃ crystal lattice, which undergoes structural reorganization for lattice strain balancing. In this work, we found that the ionic liquid (IL) could be used as the strain coordinator to balance the lattice strain for stability improvement of FAPbI₃ perovskite. We theoretically studied the electronic coupling between IL and FAPbI₃ and unraveled the originality of the IL-induced compressive strain. The strain-relaxed α-FAPbI₃ by IL showed robust stability against environmental factors, which can withstand ambient aging for 40 days without any phase transition or decomposition. Moreover, the strain-relaxed perovskite films showed a lower trap density and resulted in conversion efficiency improvement from 18.27 to 19.88%. Based on this novel strain engineering strategy, the unencapsulated PSCs maintained 90% of their initial efficiency under ambient-air aging for 50 days.

Solvent Gaming Chemistry to Control the Quality of Halide Perovskite Thin Films for Photovoltaics

Research on solvent chemistry, particularly for halide perovskite intermediates, has been advancing the development of perovskite solar cells (PSCs) toward commercial applications. A predictive understanding of solvent effects on the perovskite formation is thus essential. This work systematically discloses the relationship among the basicity of solvents, solvent-contained intermediate structures, and intermediate-to-perovskite α-FAPbI₃ evolutions. Depending on their basicity, solvents exhibit their own favorite bonding selection with FA⁺ or Pb²⁺ cations by forming either hydrogen bonds or coordination bonds, resulting in two different kinds of intermediate structures. While both intermediates can be evolved into α-FAPbI₃ below the δ-to-α thermodynamic temperature, the hydrogen-bond-favorable kind could form defect-less α-FAPbI₃ via sidestepping the break of strong coordination bonds. The disclosed solvent gaming mechanism guides the solvent selection for fabricating high-quality perovskite films and thus high-performance PSCs and modules.

Manipulation of Crystallization Kinetics for Perovskite Photovoltaics Prepared Using Two-Step Method

Two-step fabricated perovskite solar cells have attracted considerable attention because of their good reproducibility and controllable crystallization during production. Optimizing the quality of perovskite films plays a decisive role in realizing superb performance via a two-step method. Many breakthroughs have been achieved to obtain high-quality film from the perspective of manipulating crystallization kinetics in the two-step preparation process, which promotes the rapid development of perovskite photovoltaics. Therefore, focusing on the crystallization process in the two-step preparation process can provide a reliable basis for optimizing the performance of two-step devices. In this review, recent progress on regulating the crystallization process for two-step PSCs is systematically reviewed. Firstly, a specific description and discussion are provided on the crystallization process of perovskite in different two-step methods, including spin-coating, immersion and evaporation. Next, to obtain high-quality perovskite film via these two-step methods, current strategies of additive engineering, composition engineering, and solvent engineering for regulating the crystallization process for two-step perovskite are classified and investigated. Lastly, the challenges which hindering the performance of the two-step perovskite photovoltaics and an outlook toward further developments are proposed.

Exploration vs Convergence Speed in Adaptive-Bias Enhanced Sampling

In adaptive-bias enhanced sampling methods, a bias potential is added to the system to drive transitions between metastable states. The bias potential is a function of a few collective variables and is gradually modified according to the underlying free energy surface. We show that when the collective variables are suboptimal, there is an exploration–convergence tradeoff, and one must choose between a quickly converging bias that will lead to fewer transitions or a slower to converge bias that can explore the phase space more efficiently but might require a much longer time to produce an accurate free energy estimate. The recently proposed on-the-fly probability enhanced sampling (OPES) method focuses on fast convergence, but there are cases where fast exploration is preferred instead. For this reason, we introduce a new variant of the OPES method that focuses on quickly escaping metastable states at the expense of convergence speed. We illustrate the benefits of this approach in prototypical systems and show that it outperforms the popular metadynamics method.

Additive-Free, Low-Temperature Crystallization of Stable α-FAPbI3 Perovskite

Formamidinium lead triiodide (FAPbI₃ ) is attractive for photovoltaic devices due to its optimal bandgap at around 1.45 eV and improved thermal stability compared with methylammonium-based perovskites. Crystallization of phase-pure α-FAPbI₃ conventionally requires high-temperature thermal annealing at 150 °C whilst the obtained α-FAPbI₃ is metastable at room temperature. Here, aerosol-assisted crystallization (AAC) is reported, which converts yellow δ-FAPbI₃ into black α-FAPbI₃ at only 100 °C using precursor solutions containing only lead iodide and formamidinium iodide with no chemical additives. The obtained α-FAPbI₃ exhibits remarkably enhanced stability compared to the 150 °C annealed counterparts, in combination with improvements in film crystallinity and photoluminescence yield. Using X-ray diffraction, X-ray scattering, and density functional theory simulation, it is identified that relaxation of residual tensile strains, achieved through the lower annealing temperature and post-crystallization crystal growth during AAC, is the key factor that facilitates the formation of phase-stable α-FAPbI₃ . This overcomes the strain-induced lattice expansion that is known to cause the metastability of α-FAPbI₃ . Accordingly, pure FAPbI₃ p-i-n solar cells are reported, facilitated by the low-temperature (≤100 °C) AAC processing, which demonstrates increases of both power conversion efficiency and operational stability compared to devices fabricated using 150 °C annealed films.

Intermediate Chemistry of Halide Perovskites: Origin, Evolution, and Application

The preparation of solution-processed metal halide perovskites is interwoven with research on their intermediate chemistry. In this Perspective, molecule-level insights are provided into how Lewis base additives (LBAs), e.g., DMSO and NMP, facilitate powder-to-film formation processes (i.e., the chemical origin of intermediate structures, structural evolution of intermediate-to-perovskite phase transition, and device-based application of intermediate-evolved perovskites). LBAs interact with Lewis acid species (cationic A⁺ or B²⁺ sites) of ABX₃ structures with separate probability in terms of coordination bonds or hydrogen bonds to form two types of intermediate structures, inducing significant differences within intermediate-to-perovskite processes. In addition, in-depth understanding of intermediate chemistry favors the multifaceted applications of solution-processed perovskites. A brief summary is finally provided together with a perspective on how intermediate chemistry determines perovskite properties and applications.

Thermal Dynamic Self-healing Supramolecular Dopant Towards Efficient and Stable Flexible Perovskite Solar Cells

Flexible perovskite solar cells draw great attention due to their likeable traits like low cost, portability, light-weight, et al. However, mechanical stability is still the weak point in their practical application. Herein, we prepared efficient FPSC with remarkable mechanical stability by dynamic thermal self-healing effect, which can be realized by the usage of supramolecular adhesive. The colloidal adhesive was obtained by random copolymerization of acrylamide and n-butyl acrylate, which is amphiphilic, has a proper glass transition temperature and high density of hydrogen bond donors and receptors, providing the possibility of thermal dynamic repair of stress damage in FPSCs. The adhesive also greatly improves the leveling property of the precursor solution on the hydrophobic poly[bis(4-phenyl)(2,4,6-trimethylphenyl)]amine (PTAA) surface. PSCs containing this adhesive achieves more than 20% power conversion efficiency (PCE) on flexible substrates and 21.99% PCE on rigid substrates (certified PCE of 21.27%), with improved electron mobility and reduced defect concentration.

Ionic Liquid Passivation Eliminates Low-n Quantum Well Domains in Blue Quasi-2D Perovskite Films

In quasi-two-dimensional (quasi-2D) perovskite films, carriers transport in the cascade structural systems involving various quantum wells (QWs) n, but their efficiency is limited by the severe nonradiative recombination within plentiful n = 1, 2, 3 domains induced by traditional ammonium bromide passivation. Here, we fabricate the quasi-2D films with the elimination of n = 1, 2, 3 domains by introducing the ionic liquid n-butylamine acetate (BAAc) instead of n-butylamine hydrobromide (BABr), which increases the photoluminescence quantum yield (PLQY) and lowers the surface roughness of films. Due to the anion exchange between BAAc and methylamine hydrobromide (MABr), BAAc exhibits a sole passivation effect on methylamine-based perovskites. As a result, the ionic liquid-derived perovskite light-emitting diodes (PeLEDs) display blue emission at 479 nm and show significantly improved performance on external quantum efficiency (EQE) and luminance. Our finding provides insights into the passivating effect of ionic liquid on quasi-2D perovskites and will benefit fabricating PeLEDs with enhanced performance.