Novel insights into the design of stretchable electrical systems

Stretchable Strain Sensor with Small but Sufficient Adhesion to Skin

Stretchable strain sensors that use a liquid metal (eutectic gallium-indium alloy; E-GaIn) and flexible silicone rubber (Ecoflex) as the support and adhesive layers, respectively, are demonstrated. The flexibility of Ecoflex and the deformability of E-GaIn enable the sensors to be stretched by 100%. Ecoflex gel has sufficiently large adhesion force to skin, even though the adhesion force is smaller than that for commercially available adhesives. This enables the sensor to be used for non-invasive monitoring of human motion. The mechanical and electrical properties of the sensor are experimentally evaluated. The effectiveness of the proposed sensors is demonstrated by monitoring joint movements, facial expressions, and respiration.

Hierarchical Wrinkles for Tunable Strain Sensing Based on Programmable, Anisotropic, and Patterned Graphene Hybrids

Flexible, stretchable, wearable, and stable electronic materials are widely studied, owing to their applications in wearable devices and the Internet of Things. Because of the demands for both strain-insensitive resistors and high gauge factor (GF) strain-sensitive materials, anisotropic strain sensitivity has been an important aspect of electronic materials. In addition, the materials should have adjustable strain sensitivities. In this work, such properties are demonstrated in reduced graphene oxide (RGO) with hierarchical oriented wrinkle microstructures, generated using the two-step shrinkage of a rubber substrate. The GF values range from 0.15 to 28.32 at 100% strain. For device demonstrations, macrostructure patterns are designed to prepare patterned wrinkling graphene at rubber substrate (PWG@R). Serpentiform curves can be used for the constant-value resistor, combined with the first-grade wrinkles. Strip lines can increase the strain-sensing property, along with the second-grade wrinkles. The patterned sensor exhibits improved GF values range from 0.05 to 49.5. The assembled sensor shows an excellent stability (>99% retention after 600 cycles) with a high GF (49.5). It can monitor the vital signs of the throat and wrist and sense large motions of fingers. Thus, PWG@R-based strain sensors have great potential in various health or motion monitoring fields.