Biochemistry. Force signaling in biology

Mechanical stress induced protein precipitation method for drug target screening

The process of protein precipitation can be used to decipher the interaction of ligand and protein. For example, the classic Thermal Proteome Profiling (TPP) method uses heating as the driving force for protein precipitation, to discover the drug target protein. Under heating or other denature forces, the target protein that binds with the drug compound will be more resistant to precipitation than the free protein. Similar to thermal stress, mechanical stress can also induce protein precipitation. Upon mechanical stress, protein will gradually precipitate along with protein conformational changes, which can be exploited for the study of the ligand-protein interaction. Herein, we proposed a Mechanical Stress Induced Protein Precipitation (MSIPP) method for drug target deconvolution. Its streamlined workflow allows in situ sample preparation on the surface of microparticles, from protein precipitation to digestion. The mechanical stress was generated by vortexing the slurry of protein solution and microparticle materials. The mechanical stress induced protein precipitate was captured by the microparticles, which guarantees the MSIPP method to be scalable and user-friendly. The MSIPP method was successfully applied to four drug compounds, Methotrexate, Raltitrexed, SHP099, Geldanamycin and a pan-inhibitor of protein kinases, Staurosporine. Besides, DHFR was demonstrated to be a target of Raltitrexed, which has not been revealed by any other modification-free drug target discovery method yet. Thus, MSIPP is a complementary method to other drug target screening methods.

Mechanical Energy before Chemical Energy at the Origins of Life?

Mechanical forces and mechanical energy are prevalent in living cells. This may be because mechanical forces and mechanical energy preceded chemical energy at life’s origins. Mechanical energy is more readily available in nonliving systems than the various forms of chemical energy used by living systems. Two possible prebiotic environments that might have provided mechanical energy are hot pools that experience wet/dry cycles and mica sheets as they move, open and shut, as heat pumps or in response to water movements.

Mechanical Energy before Chemical Energy at the Origins of Life?

Mechanical forces and mechanical energy are prevalent in living cells. This may be because mechanical forces and mechanical energy preceded chemical energy at life’s origins. Mechanical energy is more readily available in non-living systems than the various forms of chemical energy used by living systems. Two possible prebiotic environments that might have provided mechanical energy are hot pools that experience wet/dry cycles and mica sheets as they move, open and shut, as heat pumps or in response to water movements.

Mechanical Energy before Chemical Energy at the Origins of Life?

Mechanical forces and mechanical energy are prevalent in living cells. This may be because mechanical forces and mechanical energy preceded chemical energy at life’s origins. Mechanical energy is more readily available in non-living systems than the various forms of chemical energy used by living systems. Two possible prebiotic environments that might have provided mechanical energy are hot pools that experience wet/dry cycles and mica sheets as they move, open and shut, as heat pumps or in response to water movements.

Mechanical Energy before Chemical Energy at the Origins of Life?

Forces and mechanical energy are prevalent in living cells. This may be because forces and mechanical energy preceded chemical energy at life’s origins. Mechanical energy is more readily available in non-living systems than the various other forms of energy used by living systems. Two possible prebiotic environments that might have provided mechanical energy are hot pools that experience wet/dry cycles and mica sheets as they move, open and shut, as heat pumps or in response to water movements.

Design and Fabrication by Thermal Imprint Lithography and Mechanical Characterization of a Ring-Based PDMS Soft Probe for Sensing and Actuating Forces in Biological Systems

In this paper, the design, fabrication and mechanical characterization of a novel polydimethylsiloxane (PDMS) soft probe for delivering and sensing forces in biological systems is proposed. On the basis of preliminary finite element (FEM) analysis, the design takes advantage of a suitable core geometry, characterized by a variable spring-like ring. The compliance of probes can be finely set in a wide range to measure forces in the micronewton to nanonewton range. In particular, this is accomplished by properly resizing the ring geometry and/or exploiting the mixing ratio-based elastic properties of PDMS. Fabrication by the thermal imprint lithography method allows fast and accurate tuning of ring sizes and tailoring of the contact section to their targets. By only varying geometrical parameters, the stiffness ranges from 1080 mNm^-1 to 50 mNm^-1, but by changing the base-curing agent proportion of the elastomer from 10:1 to 30:1, the stiffness drops to 37 mNm^-1. With these compliances, the proposed device will provide a new experimental tool for investigating force-dependent biological functions in sensory systems.

Modified cantilever arrays improve sensitivity and reproducibility of nanomechanical sensing in living cells

Mechanical signaling involved in molecular interactions lies at the heart of materials science and biological systems, but the mechanisms involved are poorly understood. Here we use nanomechanical sensors and intact human cells to provide unique insights into the signaling pathways of connectivity networks, which deliver the ability to probe cells to produce biologically relevant, quantifiable and reproducible signals. We quantify the mechanical signals from malignant cancer cells, with 10 cells per ml in 1000-fold excess of non-neoplastic human epithelial cells. Moreover, we demonstrate that a direct link between cells and molecules creates a continuous connectivity which acts like a percolating network to propagate mechanical forces over both short and long length-scales. The findings provide mechanistic insights into how cancer cells interact with one another and with their microenvironments, enabling them to invade the surrounding tissues. Further, with this system it is possible to understand how cancer clusters are able to co-ordinate their migration through narrow blood capillaries.

Samadhan Patil et al. report a new method for improving the sensitivity and reproducibility of mechanobiological measurements in malignant cancer cells. Their findings provide insight into the interaction of cells with each other and the microenvironment and may impact our understanding of metastasis.

Quantifying Local Molecular Tension Using Intercalated DNA Fluorescence

The ability to measure mechanics and forces in biological nanostructures, such as DNA, proteins and cells, is of great importance as a means to analyze biomolecular systems. However, current force detection methods often require specialized instrumentation. Here, we present a novel and versatile method to quantify tension in molecular systems locally and in real time, using intercalated DNA fluorescence. This approach can report forces over a range of at least ∼0.5-65 pN with a resolution of 1-3 pN, using commercially available intercalating dyes and a general-purpose fluorescence microscope. We demonstrate that the method can be easily implemented to report double-stranded (ds)DNA tension in any single-molecule assay that is compatible with fluorescence microscopy. This is particularly useful for multiplexed techniques, where measuring applied force in parallel is technically challenging. Moreover, tension measurements based on local dye binding offer the unique opportunity to determine how an applied force is distributed locally within biomolecular structures. Exploiting this, we apply our method to quantify the position-dependent force profile along the length of flow-stretched DNA and reveal that stretched and entwined DNA molecules-mimicking catenated DNA structures in vivo-display transient DNA-DNA interactions. The method reported here has obvious and broad applications for the study of DNA and DNA-protein interactions. Additionally, we propose that it could be employed to measure forces in any system to which dsDNA can be tethered, for applications including protein unfolding, chromosome mechanics, cell motility, and DNA nanomachines.

Better than Membranes at the Origin of Life?

Organelles without membranes are found in all types of cells and typically contain RNA and protein. RNA and protein are the constituents of ribosomes, one of the most ancient cellular structures. It is reasonable to propose that organelles without membranes preceded protocells and other membrane-bound structures at the origins of life. Such membraneless organelles would be well sheltered in the spaces between mica sheets, which have many advantages as a site for the origins of life.

Decoupling competing surface binding kinetics and reconfiguration of receptor footprint for ultrasensitive stress assays

Cantilever arrays have been used to monitor biochemical interactions and their associated stress. However, it is often necessary to passivate the underside of the cantilever to prevent unwanted ligand adsorption, and this process requires tedious optimization. Here, we show a way to immobilize membrane receptors on nanomechanical cantilevers so that they can function without passivating the underlying surface. Using equilibrium theory, we quantitatively describe the mechanical responses of vancomycin, human immunodeficiency virus type 1 antigens and coagulation factor VIII captured on the cantilever in the presence of competing stresses from the top and bottom cantilever surfaces. We show that the area per receptor molecule on the cantilever surface influences ligand-receptor binding and plays an important role on stress. Our results offer a new way to sense biomolecules and will aid in the creation of ultrasensitive biosensors.

Update on von Willebrand factor multimers: focus on high-molecular-weight multimers and their role in hemostasis

Normal hemostasis requires von Willebrand factor (VWF) to support platelet adhesion and aggregation at sites of vascular injury. VWF is a multimeric glycoprotein built from identical subunits that contain binding sites for both platelet glycoprotein receptors and collagen. The adhesive activity of VWF depends on the size of its multimers, which range from 500 to over 10 000 kDa. There is good evidence that the high-molecular-weight multimers (HMWM), which are 5000-10 000 kDa, are the most effective in supporting interaction with collagen and platelet receptors and in facilitating wound healing under conditions of shear stress. Thus, these HMWM of VWF are of particular clinical interest. The unusually large multimers of VWF are, under normal conditions, cleaved by the plasma metalloproteinase ADAMTS13 to smaller, less adhesive multimers. A reduction or lack of HMWM, owing to a multimerization defect of VWF or to an increased susceptibility of VWF for ADAMTS13, leads to a functionally impaired VWF and the particular type 2A of von Willebrand disease. This review considers the biology and function of VWF multimers with a particular focus on the characterization of HMWM - their production, storage, release, degradation, and role in normal physiology. Evidence from basic research and the study of clinical diseases and their management highlight a pivotal role for the HMWM of VWF in hemostasis.

Dynamics of mechanosensing in the bacterial flagellar motor

Mechanosensing by flagella is thought to trigger bacterial swarmer-cell differentiation, an important step in pathogenesis. How flagellar motors sense mechanical stimuli is not known. To study this problem, we suddenly increased the viscous drag on motors by a large factor, from very low loads experienced by motors driving hooks or hooks with short filament stubs, to high loads, experienced by motors driving tethered cells or 1-μm latex beads. From the initial speed (after the load change), we inferred that motors running at very low loads are driven by one or at most two force-generating units. Following the load change, motors gradually adapted by increasing their speeds in a stepwise manner (over a period of a few minutes). Motors initially spun exclusively counterclockwise, but then increased the fraction of time that they spun clockwise over a time span similar to that observed for adaptation in speed. Single-motor total internal reflection fluorescence imaging of YFP-MotB (part of a stator force-generating unit) confirmed that the response to sudden increments in load occurred by the addition of new force-generating units. We estimate that 6-11 force-generating units drive motors at high loads. Wild-type motors and motors locked in the clockwise or counterclockwise state behaved in a similar manner, as did motors in cells deleted for the motor protein gene fliL or for genes in the chemotaxis signaling pathway. Thus, it appears that stators themselves act as dynamic mechanosensors. They change their structure in response to changes in external load. How such changes might impact cellular functions other than motility remains an interesting question.

Well plate microfluidic system for investigation of dynamic platelet behavior under variable shear loads

The study of platelet behavior in real-time under controlled shear stress offers insights into the underlying mechanisms of many vascular diseases and enables evaluation of platelet-focused therapeutics. The two most common methods used to study platelet behavior at the vessel wall under uniform shear flow are parallel plate flow chambers and cone-plate viscometers. Typically, these methods are difficult to use, lack experimental flexibility, provide low data content, are low in throughput, and require large reagent volumes. Here, we report a well plate microfluidic (WPM)-based system that offers high throughput, low reagent consumption, and high experimental flexibility in an easy to use well plate format. The system consists of well plates with an integrated array of microfluidic channels, a pneumatic interface, an automated microscope, and software. This WPM system was used to investigate dynamic platelet behavior under shear stress. Multiple channel designs are presented and tested for shear loads with whole blood to determine their applicability to study thrombus formation. Normal physiological shear (0.1-20 dyn/cm(2) ) and pathological shear (20-200 dyn/cm(2) ) devices were used to study platelet behavior in vitro under various shear, matrix coating, and monolayer conditions. The high physiological relevance, low blood consumption, and increased throughput create a valuable technique available to vascular biology researchers. The approach also has extensibility to other research areas including inflammation, cancer biology, and developmental/stem cell research.

Fast and forceful refolding of stretched alpha-helical solenoid proteins

Anfinsen's thermodynamic hypothesis implies that proteins can encode for stretching through reversible loss of structure. However, large in vitro extensions of proteins that occur through a progressive unfolding of their domains typically dissipate a significant amount of energy, and therefore are not thermodynamically reversible. Some coiled-coil proteins have been found to stretch nearly reversibly, although their extension is typically limited to 2.5 times their folded length. Here, we report investigations on the mechanical properties of individual molecules of ankyrin-R, beta-catenin, and clathrin, which are representative examples of over 800 predicted human proteins composed of tightly packed alpha-helical repeats (termed ANK, ARM, or HEAT repeats, respectively) that form spiral-shaped protein domains. Using atomic force spectroscopy, we find that these polypeptides possess unprecedented stretch ratios on the order of 10-15, exceeding that of other proteins studied so far, and their extension and relaxation occurs with minimal energy dissipation. Their sequence-encoded elasticity is governed by stepwise unfolding of small repeats, which upon relaxation of the stretching force rapidly and forcefully refold, minimizing the hysteresis between the stretching and relaxing parts of the cycle. Thus, we identify a new class of proteins that behave as highly reversible nanosprings that have the potential to function as mechanosensors in cells and as building blocks in springy nanostructures. Our physical view of the protein component of cells as being comprised of predominantly inextensible structural elements under tension may need revision to incorporate springs.

The effect of shear stress on protein conformation: Physical forces operating on biochemical systems: The case of von Willebrand factor

Macromolecules and cells exposed to blood flow in the circulatory tree experience hydrodynamic forces that affect their structure and function. After introducing the general theory of the effects of shear forces on protein conformation, selected examples are presented in this review for biological macromolecules sensitive to shear stress. In particular, the biochemical effects of shear stress in controlling the von Willebrand Factor (VWF) conformation are extensively described. This protein, together with blood platelets, is the main actor of the early steps of primary haemostasis. Under the effect of shear forces >30 dyn/cm², VWF unfolding occurs and the protein exhibits an extended chain conformation oriented in the general direction of the shear stress field. The stretched VWF conformation favors also a process of self aggregation, responsible for the formation of a spider web network, particularly efficient in the trapping process of flowing platelets. Thus, the effect of shear stress on conformational changes in VWF shows a close structure-function relationship in VWF for platelet adhesion and thrombus formation in arterial circulation, where high shear stress is present. The investigation of biophysical effects of shear forces on VWF conformation contributes to unraveling the molecular interaction mechanisms involved in arterial thrombosis.

Rheo-NMR studies of an enzymatic reaction: evidence of a shear-stable macromolecular system

Understanding the effects of shear forces on biopolymers is key to understanding how biological systems function. Although currently there is good agreement between theoretical predictions and experimental measurements of the behavior of DNA and large multimeric proteins under shear flow, applying the same arguments to globular proteins leads to the prediction that they should only exhibit shear-induced conformational changes at extremely large shear rates. Nevertheless, contradictory experimental evidence continues to appear, and the effect of shear on these biopolymers remains contentious. Here, a custom-built rheo-NMR cell was used to investigate whether shear flow modifies enzyme action compared with that observed quiescently. Specifically, (1)H NMR was used to follow the kinetics of the liberation of methanol from the methylesterified polysaccharide pectin by pectinmethylesterase enzymes. Two different demethylesterifying enzymes, known to have different action patterns, were used. In all experiments performed, Couette flows with shear rates of up to 1570 s(-1) did not generate detectable differences in the rate of methanol liberation compared to unsheared samples. This study provides evidence for a shear-stable macromolecular system consisting of a largely beta-sheet protein and a polysaccharide, in line with current theoretical predictions, but in contrast to some other experimental work on other proteins.