1
|
Isomeric Porous Cu(I) Triazolate Frameworks Showing Periodic and Aperiodic Flexibility for Efficient CO Separation. J Am Chem Soc 2024; 146:13886-13893. [PMID: 38739909 DOI: 10.1021/jacs.4c01539] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/16/2024]
Abstract
Guest-induced (crystal-to-crystal) transformation, i.e., periodic flexibility, is a typical feature of molecule-based crystalline porous materials, but its role for adsorptive separation is controversial. On the other hand, aperiodic flexibility is rarely studied. This work reports a pair of isomeric Cu(I) triazolate frameworks, namely, α-[Cu(fetz)] (MAF-2Fa) and β-[Cu(fetz)] (MAF-2Fb), which show typical periodic and aperiodic flexibility for CO chemical adsorption, respectively. Quantitative mixture breakthrough experiments show that, while MAF-2Fa exhibits high adsorption capacity at high pressures but negligible adsorption below the threshold pressure and with leakage concentrations of 3-8%, MAF-2Fb exhibits relatively low adsorption capacity at high pressures but no leakage (residual CO concentration <1 ppb). Tandem connection of MAF-2Fa and MAF-2Fb can combine their advantages of high CO adsorption capacities at high and low pressures, respectively. MAF-2Fa and MAF-2Fb can both keep the separation performances unchanged at high relative humidities, but only MAF-2Fb shows a unique coadsorption behavior at a relative humidity of 82%, which can be used to improve purification performances.
Collapse
|
2
|
Polymorph transformation in a mixed-stacking nickel-dithiolene complex with the derivative of 4,4'-bipyridinium. Dalton Trans 2024; 53:8202-8213. [PMID: 38687296 DOI: 10.1039/d4dt00324a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/02/2024]
Abstract
In this study, two polymorphs of the [1,1'-dibutyl-4,4'-bipyridinium][Ni(mnt)2] salt (1) were synthesized. The dark-green polymorph (designated as 1-g) was prepared under ambient conditions by the rapid precipitation method in aqueous solutions. Subsequently, the red polymorph (labeled as 1-r) was obtained by subjecting 1-g to ultrasonication in MeOH at room temperature. Microanalysis, infrared spectroscopy, thermogravimetry (TG), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD) techniques were used to characterize the two polymorphs. Both 1-g and 1-r exhibit structural phase transitions: a reversible phase transition at ∼403 K (∼268 K) upon heating and 384 K (∼252 K) upon cooling for 1-g (1-r) within the temperature range below 473 K. Interestingly, on heating 1-r to 523 K, an irreversible phase transition occurred at about 494 K, resulting in the conversion of 1-r into 1-g. Relative to 1-r, 1-g represents a thermodynamically metastable phase wherein numerous high-energy conformations in butyl chains of cations are confined within the lattice owing to quick precipitation or rapid annealing from higher temperatures. Through variable-temperature single crystal and powder X-ray diffractions, UV-visible spectroscopy, dielectric spectroscopy, and DSC analyses, this study delves into the mechanism underlying phase transitions for each polymorph and the manual transformation between 1-g and 1-r as well.
Collapse
|
3
|
Gas-Triggered Gate-Opening in a Flexible Three-Dimensional Covalent Organic Framework. J Am Chem Soc 2024. [PMID: 38615324 DOI: 10.1021/jacs.4c01331] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/16/2024]
Abstract
The development of novel soft porous crystals (SPCs) that can be transformed from nonporous to porous crystals is significant because of their promising applications in gas storage and separation. Herein, we systematically investigated for the first time the gas-triggered gate-opening behavior of three-dimensional covalent organic frameworks (3D COFs) with flexible building blocks. FCOF-5, a 3D COF containing C-O single bonds in the backbone, exhibits a unique "S-shaped" isotherm for various gases, such as CO2, C2, and C3 hydrocarbons. According to in situ characterization, FCOF-5 undergoes a pressure-induced closed-to-open structural transition due to the rotation of flexible C-O single bonds in the framework. Furthermore, the gated hysteretic sorption property of FCOF-5 can enable its use as an absorbent for the efficient removal of C3H4 from C3H4/C3H6 mixtures. Therefore, 3D COFs synthesized from flexible building blocks represent a new type of SPC with gate-opening characteristics. This study will strongly inspire us to design other 3D COF-based SPCs for interesting applications in the future.
Collapse
|
4
|
Temperature-Dependent Separation of CO 2 from Light Hydrocarbons in a Porous Self-Assembly of Vertexes Sharing Octahedra. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2308028. [PMID: 38308108 PMCID: PMC11005747 DOI: 10.1002/advs.202308028] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/24/2023] [Revised: 01/14/2024] [Indexed: 02/04/2024]
Abstract
Design of flexible porous materials where the diffusion of guest molecules is regulated by the dynamics of contracted pore aperture is challenging. Here, a flexible porous self-assembly consisting of 1D channels with dynamic bottleneck gates is reported. The dynamic pendant naphthimidazolylmethyl moieties at the channel necks provide kinetic gate function, that enables unusual adsorption for light hydrocarbons. The adsorption for CO2 is mainly dominated by thermodynamics with the uptakes decreasing with increasing temperature, whereas the adsorptions for larger hydrocarbons are controlled by both thermodynamics and kinetics resulting in an uptake maximum at a temperature threshold. Such an unusual adsorption enables temperature-dependent separation of CO2 from the corresponding hydrocarbons.
Collapse
|
5
|
Supramolecular Interactions Induce Dynamics in Metal-Organic Layers to Selectively Separate Acetylene from Carbon Dioxide. Inorg Chem 2024; 63:6033-6041. [PMID: 38500387 DOI: 10.1021/acs.inorgchem.4c00350] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/20/2024]
Abstract
We report the synthesis and structural characterization of a 2D metal-organic framework with AB-packing layers, [Co2(pybz)2(CH3COO)2]·DMF (Co2, pybz= 4-(4-pyridyl)benzoate), containing a stable (4,4)-grid network fabricated by paddle-wheel nodes, ditopic pybz, and acetate ligands. After removal of the guest, the layer structure is retained but reorganized into an ABCD packing mode in the activated phase (Co2a). Consequently, the intralayer square windows (7.2 × 5.0 Å2) close, while the interlayer separation is decreased slightly from 3.69 to 3.45 Å, leaving a narrow gap. Importantly, the dangling methyl group of the acetate with H-bonds to the adjacent layers and also the well-distributed π-π interactions between the aromatic rings of neighboring layers facilitate the structural stability. These weak supramolecular interactions further allow for favorable dynamic exfoliation of the layers, which promotes efficient adsorption of C2H2 (41.6 cm3 g-1) over CO2 with an adsorption ratio of 6.3 (0.5 bar, 298 K). The effective separation performance of equimolar C2H2/CO2 was verified by cycling breakthrough experiments and was even tolerable to moisture (R.H = 52%). DFT calculations, in situ PXRD, and PDF characterization reveal that the favorable retention of C2H2 rather than that of CO2 is due to its H-bond formation with the paddle-wheel oxygen atoms that triggers the increase in interlayer separation during C2H2 adsorption.
Collapse
|
6
|
Iodine Adsorption-Desorption-Induced Structural Transformation and Improved Ag + Turn-On Luminescent Sensing Performance of a Nonporous Eu(III) Metal-Organic Framework. Inorg Chem 2024; 63:4185-4195. [PMID: 38364251 DOI: 10.1021/acs.inorgchem.3c04222] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/18/2024]
Abstract
Posttreatment of pristine metal-organic frameworks (MOFs) with suitable vapor may be an effective way to regulate their structures and properties but has been less explored. Herein, we report an interesting example in which a crystalline nonporous Eu(III)-MOF was transferred to a porous amorphous MOF (aMOF) via iodine vapor adsorption-desorption posttreatment, and the resulting aMOF showed improved turn-on sensing properties with respect to Ag+ ions. The crystalline Eu-MOF, namely, Eu-IPDA, was assembled from Eu(III) and 4,4'-{4-[4-(1H-imidazol-1-yl)phenyl]pyridine-2,6-diyl}dibenzoic acid (H2IPDA) and exhibited a two-dimensional (2D) coordination network based on one-dimensional secondary building blocks. The close packing of the 2D networks gives rise to a three-dimensional supramolecular framework without any significant pores. Interestingly, the nonporous Eu-IPDA could absorb iodine molecules when Eu-IPDA crystals were placed in iodine vapor at 85 °C, and the adsorption capacity was 1.90 g/g, which is comparable to those of many MOFs with large BET surfaces. The adsorption of iodine is attributed to the strong interactions among the iodine molecule, the carboxy group, and the N-containing group and leads to the amorphization of the framework. After immersion of the iodine-loaded Eu-IPDA in EtOH, approximately 89.7% of the iodine was removed, resulting in a porous amorphous MOF, denoted as a-Eu-IPDA. In addition, the remaining iodine in the a-Eu-IPDA framework causes strong luminescent quenching in the fluorescence emission region of the Eu(III) center when compared with that in Eu-IPDA. The luminescence intensity of a-Eu-IPDA in water suspensions was significantly enhanced when Ag+ ions were added, with a detection limit of 4.76 × 10-6 M, which is 1000 times that of pristine Eu-IPDA. It also showed strong anti-interference ability over many common competitive metal ions and has the potential to sense Ag+ in natural water bodies and traditional Chinese medicine preparations. A mechanistic study showed that the interactions between Ag+ and the absorbed iodine, the carboxylate group, and the N atoms all contribute to the sensing performance of a-Eu-IPDA.
Collapse
|
7
|
Regulating the Flexibility to Assemble Porous Single-Atom Fe-Coordinated Metallopolymers for Efficient Heterogeneous Catalytic Oxidations. ACS APPLIED MATERIALS & INTERFACES 2024; 16:5823-5833. [PMID: 38285621 DOI: 10.1021/acsami.3c15958] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/31/2024]
Abstract
Metallopolymers as organic-inorganic hybrid materials formulated by metal embedding organic polymers show great potential for novel heterogeneous catalysis, in terms of the facile structural design and tunability. Herein, the disadvantage of nonporous stacking of one-dimensional (1D) structures has been suppressed by chain modulation of the 1D metallopolymers, allowing for the convenient construction of porous assemblies with single-atom dispersion and accessible active sites. By postmodification, the Fe/CM-1 catalyst readily synthesized by coordinating the Fe(II) to the twisted chain of 1D Schiff-base polymer possesses expedient flexibility, showing the highest porosity, remarkable heterogeneous recyclability, and thus prominent catalytic activity for the selective oxidation of benzylamine and alcohols. Moreover, control experiments supported by computational studies demonstrated that the unique pincer structure of Fe/CM-1 effectively maintains the valence state of the anchored single-atom iron, facilitating single-electron transfer and promoting efficient iron redox cycling during the catalytic process. Notably, these 1D metallopolymers have the advantage of cost-effectiveness, easy preparation in gram-scale, and utilization in continuous reaction, providing inspirations for facile synthesis of efficient heterogeneous catalysts from the well-developed 1D metallopolymers.
Collapse
|
8
|
A copper(I) thiocyanate-based photoresponsive semiconducting 2D coordination polymer. Dalton Trans 2024; 53:1445-1448. [PMID: 38197251 DOI: 10.1039/d3dt03125j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2024]
Abstract
A coordination polymer, [Cu(SCN)(iqi)]n (iqi = isoquinoline), containing copper(I) thiocyanate and a nitrogen-containing π-conjugated ligand, iqi, has been synthesized and its physical properties were evaluated. This coordination polymer has a two-dimensional (2D) sheet structure consisting of copper(I) thiocyanate and shows photoluminescence derived from 3MLCT and photoconductive properties.
Collapse
|
9
|
Quasi-open Cu(I) sites for efficient CO separation with high O 2/H 2O tolerance. NATURE MATERIALS 2024; 23:116-123. [PMID: 37957269 DOI: 10.1038/s41563-023-01729-4] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/06/2022] [Accepted: 10/16/2023] [Indexed: 11/15/2023]
Abstract
Carbon monoxide (CO) separation relies on chemical adsorption but suffers from the difficulty of desorption and instability of open metal sites against O2, H2O and so on. Here we demonstrate quasi-open metal sites with hidden or shielded coordination sites as a promising solution. Possessing the trigonal coordination geometry (sp2), Cu(I) ions in porous frameworks show weak physical adsorption for non-target guests. Rational regulation of framework flexibility enables geometry transformation to tetrahedral geometry (sp3), generating a fourth coordination site for the chemical adsorption of CO. Quantitative breakthrough experiments at ambient conditions show CO uptakes up to 4.1 mmol g-1 and CO selectivity up to 347 against CO2, CH4, O2, N2 and H2. The adsorbents can be completely regenerated at 333-373 K to recover CO with a purity of >99.99%, and the separation performances are stable in high-concentration O2 and H2O. Although CO leakage concentration generally follows the structural transition pressure, large amounts (>3 mmol g-1) of ultrahigh-purity (99.9999999%, 9N; CO concentration < 1 part per billion) gases can be produced in a single adsorption process, demonstrating the usefulness of this approach for separation applications.
Collapse
|
10
|
Molecular Sieving of Propyne/Propylene by a Scalable Nanoporous Crystal with Confined Rotational Shutters. Angew Chem Int Ed Engl 2023; 62:e202316792. [PMID: 37955415 DOI: 10.1002/anie.202316792] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/05/2023] [Revised: 11/12/2023] [Accepted: 11/13/2023] [Indexed: 11/14/2023]
Abstract
Soft porous coordination polymers (PCPs) have the remarkable ability to recognize similar molecules as a result of their structural dynamics. However, their guest-induced gate-opening behaviors often lead to issues with selectivity and separation efficiency, as co-adsorption is nearly unavoidable. Herein, we report a strategy of a confined-rotational shutter, in which the rotation of pyridyl rings within the confined nanospace of a halogen-bonded coordination framework (NTU-88) creates a maximum aperture of 4.4 Å, which is very close to the molecular size of propyne (C3 H4 : 4.4 Å), but smaller than that of propylene (C3 H6 : 5.4 Å). This has been evidenced by crystallographic analyses and modelling calculations. The NTU-88o (open phase of activated NTU-88) demonstrates dedicated C3 H4 adsorption, and thereby leads to a sieving separation of C3 H4 /C3 H6 under ambient conditions. The integrated nature of high uptake ratio, considerable capacity, scalable synthesis, and good stability make NTU-88 a promising candidate for the feasible removal of C3 H4 from C3 H4 /C3 H6 mixtures. In principle, this strategy holds high potential for extension to soft families, making it a powerful tool for optimizing materials that can tackle challenging separations with no co-adsorption, while retaining the crucial aspect of high capacity.
Collapse
|
11
|
Pore chemistry and geometry control in a metal azolate framework for one-step ethylene purification from quinary gas mixture. J Colloid Interface Sci 2023; 656:538-544. [PMID: 38007945 DOI: 10.1016/j.jcis.2023.11.096] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2023] [Revised: 10/18/2023] [Accepted: 11/16/2023] [Indexed: 11/28/2023]
Abstract
In the petrochemical industry, obtaining polymer-grade ethylene from complex light-hydrocarbon mixtures by one-step separation is important and challenging. Here, we successfully prepared the Metal-Azolate Framework 7 (MAF-7) with pore chemistry and geometry control to realize the one-step separation of ethylene from cracking gas with up to quinary gas mixtures (propane/propylene/ethane/ethylene/acetylene). Based on the tailor-made pore environment, MAF-7 exhibited better selective adsorption of propane, propylene, ethane and acetylene than ethylene, and the adsorption ratios of ethane/ethylene and propylene/ethylene are as high as 1.49 and 2.81, respectively. The pore geometry design of MAF-7 leads to the unique weak binding affinity and adsorption site for ethylene molecules, which is clearly proved by Grand Canonical Monte Carlo theoretical calculations. The breakthrough experiments show that ethylene can be directly obtained from binary, ternary, and quinary gas mixtures. These comprehensive properties show that MAF-7 is expected to achieve one-step purification of ethylene in complex light hydrocarbon mixtures.
Collapse
|
12
|
Delicate Softness in a Temperature-Responsive Porous Crystal for Accelerated Sieving of Propylene/Propane. J Am Chem Soc 2023; 145:24425-24432. [PMID: 37880205 DOI: 10.1021/jacs.3c10277] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2023]
Abstract
Soft nanoporous crystals with structural dynamics are among the most exciting recently discovered materials. However, designing or controlling a porous system with delicate softness that can recognize similar gas pairs, particularly for the promoted ability at increased temperature, remains a challenge. Here, we report a soft crystal (NTU-68) with a one-dimensional (1D) channel that expands and contracts delicately around 4 Å at elevated temperature. The completely different adsorption processes of propane (C3H8: kinetic dominance) and propylene (C3H6: thermodynamic preference) allow the crystal to show a sieving separation of this mixtures (9.9 min·g-1) at 273 K, and the performance increases more than 2-fold (20.4 min·g-1) at 298 K. This phenomenon is contrary to the general observation for adsorption separation: the higher the temperature, the lower the efficiency. Gas-loaded in situ powder X-ray analysis and modeling calculations reveal that slight pore expansion caused by the increased temperature provides plausible nanochannel for adsorption of the relatively smaller C3H6 while maintaining constriction on the larger C3H8. In addition, the separation process remains unaffected by the general impurities, demonstrating its true potential as an alternative sorbent for practical applications. Moving forward, the delicate crystal dynamics and promoted capability for molecular recognition provide a new route for the design of next-generation sieve materials.
Collapse
|
13
|
Photo-Induced Construction and Recovery of Cu + Sites in Metal-Organic Frameworks. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2302885. [PMID: 37264726 DOI: 10.1002/smll.202302885] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/06/2023] [Revised: 05/16/2023] [Indexed: 06/03/2023]
Abstract
The adjustment of the valence state of metal ions is crucial for various applications because peculiar activity originates from metal ions with specific valence. Cu+ can interact with molecules possessing unsaturated bonds like CO via π-complexation, while Cu2+ doesn't have such ability. Meanwhile, Cu+ sites are easily oxidized to Cu2+ , leading to the loss of activity. Despite great efforts, the development of a facile method to construct and recover Cu+ sites remains a pronounced challenge. Here, for the first time a facile photo-induced strategy is reported to fabricate Cu+ sites in metal-organic frameworks (MOFs) and recover Cu+ after oxidation. The Cu2+ precursor was loaded on NH2 -MIL-125, a typical visible-light responsive Ti-based MOF. Visible light irradiation triggers the formation of Ti3+ from Ti4+ in framework, which reduces the supported Cu2+ in the absence of any additional reducing agent, thus simplifying the process for Cu+ generation significantly. Due to π-complexation interaction, the presence of Cu+ results in remarkably enhanced CO capture capacity (1.16 mmol g-1 ) compared to NH2 -MIL-125 (0.49 mmol g-1 ). More importantly, Cu+ can be recovered conveniently via re-irradiation when it is oxidized to Cu2+ , and the oxidation-recovery process is reversible.
Collapse
|
14
|
Effector-dependent structural transformation of a crystalline framework with allosteric effects on molecular recognition ability. Nat Commun 2023; 14:4490. [PMID: 37563107 PMCID: PMC10415384 DOI: 10.1038/s41467-023-40091-6] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/27/2023] [Accepted: 07/12/2023] [Indexed: 08/12/2023] Open
Abstract
Structurally flexible porous crystals that combine high regularity and stimuli responsiveness have received attracted attention in connection with natural allostery found in regulatory systems of activity and function in biological systems. Porous crystals with molecular recognition sites in the inner pores are particularly promising for achieving elaborate functional control, where the local binding of effectors triggers their distortion to propagate throughout the structure. Here we report that the structure of a porous molecular crystal can be allosterically controlled by local adsorption of effectors within low-symmetry nanochannels with multiple molecular recognition sites. The exchange of effectors at the allosteric site triggers diverse conversion of the framework structure in an effector-dependent manner. In conjunction with the structural conversion, it is also possible to switch the molecular affinity at different recognition sites. These results may provide a guideline for the development of supramolecular materials with flexible and highly-ordered three-dimensional structures for biological applications.
Collapse
|
15
|
Metal cation substitution can tune CO 2, H 2O and CH 4 switching pressure in transiently porous coordination networks. JOURNAL OF MATERIALS CHEMISTRY. A 2023; 11:16019-16026. [PMID: 38013758 PMCID: PMC10394667 DOI: 10.1039/d3ta03300g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/04/2023] [Accepted: 07/17/2023] [Indexed: 11/29/2023]
Abstract
Compared to rigid physisorbents, switching coordination networks that reversibly transform between closed (non-porous) and open (porous) phases offer promise for gas/vapour storage and separation owing to their improved working capacity and desirable thermal management properties. We recently introduced a coordination network, X-dmp-1-Co, which exhibits switching enabled by transient porosity. The resulting "open" phases are generated at threshold pressures even though they are conventionally non-porous. Herein, we report that X-dmp-1-Co is the parent member of a family of transiently porous coordination networks [X-dmp-1-M] (M = Co, Zn and Cd) and that each exhibits transient porosity but switching events occur at different threshold pressures for CO2 (0.8, 2.1 and 15 mbar, for Co, Zn and Cd, respectively, at 195 K), H2O (10, 70 and 75% RH, for Co, Zn and Cd, respectively, at 300 K) and CH4 (<2, 10 and 25 bar, for Co, Zn and Cd, respectively, at 298 K). Insight into the phase changes is provided through in situ SCXRD and in situ PXRD. We attribute the tuning of gate-opening pressure to differences and changes in the metal coordination spheres and how they impact dpt ligand rotation. X-dmp-1-Zn and X-dmp-1-Cd join a small number of coordination networks (<10) that exhibit reversible switching for CH4 between 5 and 35 bar, a key requirement for adsorbed natural gas storage.
Collapse
|
16
|
An approach to MOFaxanes by threading ultralong polymers through metal-organic framework microcrystals. Nat Commun 2023; 14:3241. [PMID: 37296133 DOI: 10.1038/s41467-023-38835-5] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/23/2022] [Accepted: 05/17/2023] [Indexed: 06/12/2023] Open
Abstract
Mechanically interlocked architecture has inspired the fabrication of numerous molecular systems, such as rotaxanes, catenanes, molecular knots, and their polymeric analogues. However, to date, the studies in this field have only focused on the molecular-scale integrity and topology of its unique penetrating structure. Thus, the topological material design of such architectures has not been fully explored from the nano- to the macroscopic scale. Here, we propose a supramolecular interlocked system, MOFaxane, comprised of long chain molecules penetrating a microcrystal of metal-organic framework (MOF). In this study, we describe the synthesis of polypseudoMOFaxane that is one of the MOFaxane family. This has a polythreaded structure in which multiple polymer chains thread a single MOF microcrystal, forming a topological network in the bulk state. The topological crosslinking architecture is obtained by simply mixing polymers and MOFs, and displays characteristics distinct from those of conventional polyrotaxane materials, including suppression of unthreading reactions.
Collapse
|
17
|
Carbon monoxide separation: past, present and future. Chem Soc Rev 2023; 52:3741-3777. [PMID: 37083229 PMCID: PMC10243283 DOI: 10.1039/d3cs00147d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/26/2023] [Indexed: 04/22/2023]
Abstract
Large amounts of carbon monoxide are produced by industrial processes such as biomass gasification and steel manufacturing. The CO present in vent streams is often burnt, this produces a large amount of CO2, e.g., oxidation of CO from metallurgic flue gasses is solely responsible for 2.7% of manmade CO2 emissions. The separation of N2 from CO due to their very similar physical properties is very challenging, meaning that numerous energy-intensive steps are required for CO separation, making the CO separation from many process streams uneconomical in spite of CO being a valuable building block in the production of major chemicals through C1 chemistry and the production of linear hydrocarbons by the Fischer-Tropsch process. The development of suitable processes for the separation of carbon monoxide has both industrial and environmental significance. Especially since CO is a main product of electrocatalytic CO2 reduction, an emerging sustainable technology to enable carbon neutrality. This technology also requires an energy-efficient separation process. Therefore, there is a great need to develop energy efficient CO separation processes adequate for these different process streams. As such the urgency of separating carbon monoxide is gaining greater recognition, with research in the field becoming more and more crucial. This review details the principles on which CO separation is based and provides an overview of currently commercialised CO separation processes and their limitations. Adsorption is identified as a technology with the potential for CO separation with high selectivity and energy efficiency. We review the research efforts, mainly seen in the last decades, in developing new materials for CO separation via ad/bsorption and membrane technology. We have geared our review to both traditional CO sources and emerging CO sources, including CO production from CO2 conversion. To that end, a variety of emerging processes as potential CO2-to-CO technologies are discussed and, specifically, the need for CO capture after electrochemical CO2 reduction is highlighted, which is still underexposed in the available literature. Altogether, we aim to highlight the knowledge gaps that could guide future research to improve CO separation performance for industrial implementation.
Collapse
|
18
|
Covalent organic framework atropisomers with multiple gas-triggered structural flexibilities. NATURE MATERIALS 2023; 22:636-643. [PMID: 37037962 DOI: 10.1038/s41563-023-01523-2] [Citation(s) in RCA: 15] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/17/2022] [Accepted: 03/03/2023] [Indexed: 05/05/2023]
Abstract
Covalent organic frameworks (COFs) are emerging crystalline porous polymers, showing great potential for applications but lacking gas-triggered flexibility. Atropisomerism was experimentally discovered in 1922 but has rarely been found in crystals with infinite framework structures. Here we report atropisomerism in COF single crystals. The obtained COF atropisomers, namely COF-320 and COF-320-A, have identical chemical and interpenetrated structures but differ in the spatial arrangement of repeating units. In contrast to the rigid COF-320 structure, its atropisomer (COF-320-A) exhibits unconventional gas sorption behaviours with one or more sorption steps in isotherms at different temperatures. Single-crystal structures determined from continuous rotation electron diffraction and in situ powder X-ray diffraction demonstrate that these adsorption steps originate from internal pore expansion with or without changing the crystal space group. COF-320-A recognizes different gases by expanding its internal pores continuously (crystal-to-amorphous transition) or discontinuously (crystal-to-crystal transition) or having mixed transition styles, distinguishing COF-320-A from existing soft/flexible porous crystals. These findings extend atropisomerism from molecules to crystals and propel COFs into the covalently linked soft porous crystal regime, further advancing applications of soft porous crystals in gas sorption, separation and storage.
Collapse
|
19
|
Vertex Strategy in Layered 2D MOFs: Simultaneous Improvement of Thermodynamics and Kinetics for Record C 2H 2/CO 2 Separation Performance. J Am Chem Soc 2023; 145:9254-9263. [PMID: 37053465 DOI: 10.1021/jacs.3c01784] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/15/2023]
Abstract
Developing adsorbents with multiple merits in capacity, selectivity, mass transfer, and stability toward C2H2/CO2 separation is crucial and challenging for producing high-purity C2H2 for advanced polymers and the electronic industry. Here, we demonstrate a vertex strategy to create adsorbents combining these merits through rationally designing the vertex groups of a wavy-shaped framework in layered 2D metal-organic frameworks (MOFs) to finely regulate the local conformation and stacking interactions, which creates the optimal inter- and intralayer space to realize simultaneous improvement of adsorption thermodynamics and kinetics. Two new hydrolytically stable MOFs, ZUL-330 and ZUL-430, were prepared, and diverse experiments and modeling on both adsorption equilibrium and diffusion were performed. Record separation selectivities coupled with extraordinary dynamic C2H2 capacities were achieved for C2H2/CO2 mixtures with different proportions (50/50 or 10/5, v/v), along with a small diffusion barrier and fast mass transfer. Consequently, polymer-grade (99.9%) and electronic-grade (99.99%) C2H2 were obtained with excellent productivities of up to ∼6 mmol cm-3.
Collapse
|
20
|
Shape-Memory Effect Triggered by π-π Interactions in a Flexible Terpyridine Metal-Organic Framework. ACS MATERIALS LETTERS 2023; 5:1256-1260. [PMID: 37034385 PMCID: PMC10074452 DOI: 10.1021/acsmaterialslett.3c00068] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/18/2023] [Accepted: 03/16/2023] [Indexed: 06/19/2023]
Abstract
Shape-memory polymers and alloys are adaptable materials capable of reversing from a deformed, metastable phase to an energetically favored original phase in response to external stimuli. In the context of metal-organic frameworks, the term shape-memory is defined as the property of a switchable framework to stabilize the reopened pore phase after the first switching transition. Herein we describe a novel flexible terpyridine MOF which, upon desolvation, transforms into a nonporous structure that reopens into a shape-memory phase when exposed to CO2 at 195 K. Based on comprehensive in situ experimental studies (SC-XRD and PXRD) and DFT energetic considerations combined with literature reports, we recommend dividing shape-memory MOFs into two categories, viz responsive and nonresponsive, depending on the transformability of the gas-free reopened pore phase into the collapsed phase. Furthermore, considering the methodological gap in discovering and understanding shape-memory porous materials, we emphasize the importance of multicycle physisorption experiments for dynamic open framework materials, including metal-organic and covalent organic frameworks.
Collapse
|
21
|
Reversible transformations between the non-porous phases of a flexible coordination network enabled by transient porosity. Nat Chem 2023; 15:542-549. [PMID: 36781909 PMCID: PMC10070188 DOI: 10.1038/s41557-022-01128-3] [Citation(s) in RCA: 13] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2021] [Accepted: 12/15/2022] [Indexed: 02/15/2023]
Abstract
Flexible metal-organic materials that exhibit stimulus-responsive switching between closed (non-porous) and open (porous) structures induced by gas molecules are of potential utility in gas storage and separation. Such behaviour is currently limited to a few dozen physisorbents that typically switch through a breathing mechanism requiring structural contortions. Here we show a clathrate (non-porous) coordination network that undergoes gas-induced switching between multiple non-porous phases through transient porosity, which involves the diffusion of guests between discrete voids through intra-network distortions. This material is synthesized as a clathrate phase with solvent-filled cavities; evacuation affords a single-crystal to single-crystal transformation to a phase with smaller cavities. At 298 K, carbon dioxide, acetylene, ethylene and ethane induce reversible switching between guest-free and gas-loaded clathrate phases. For carbon dioxide and acetylene at cryogenic temperatures, phases showing progressively higher loadings were observed and characterized using in situ X-ray diffraction, and the mechanism of diffusion was computationally elucidated.
Collapse
|
22
|
Active Separation of Water Isotopologues by Local Molecular Motion in Microporous Framework Materials. Angew Chem Int Ed Engl 2023; 62:e202217680. [PMID: 36591731 DOI: 10.1002/anie.202217680] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2022] [Revised: 12/26/2022] [Accepted: 12/28/2022] [Indexed: 01/03/2023]
Abstract
Around 10-15 % of the world's energy consumption is accounted for by the separation and purification of chemicals. Among them is the enrichment and separation of isotopologues which are an essential aspect of modern chemistry. In their recent work, Su et al. demonstrate the separation of water isotopologues by responsive dynamic pore windows in a microporous coordination polymer with unprecedented selectivity based on an elegant mechanism.
Collapse
|
23
|
Propagating MOF flexibility at the macroscale: the case of MOF-based mechanical actuators. Chem Commun (Camb) 2023; 59:1744-1756. [PMID: 36661894 DOI: 10.1039/d2cc05813h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/18/2023]
Abstract
Shapeshifting materials have captured the imagination of researchers for their myriad potential applications, yet their practical development remains challenging. These materials operate by mechanical actuation: their structural responses to external stimuli generate mechanical work. Here, we review progress on the use of flexible metal-organic frameworks (MOFs) in composite actuators that shapeshift in a controlled fashion. We highlight the dynamic behaviour of flexible MOFs, which are unique among materials, even other porous ones, and introduce the concept of propagation, which involves the efficient transmission of flexible MOF deformations to the macroscale. Furthermore, we explain how researchers can observe, measure, and induce such effects in MOF composites. Next, we review pioneering first-generation MOF-composite actuators that shapeshift in response to changes in humidity, temperature, pressure, or to other stimuli. Finally, we allude to recent developments, identify remaining R & D hurdles, and suggest future directions in this field.
Collapse
|
24
|
A contemporary report on explications of flexible metal-organic frameworks with regards to structural simulation, dynamics and material applications. Polyhedron 2022. [DOI: 10.1016/j.poly.2022.116041] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
25
|
Metal–ligand Lability and Ligand Mobility Enables Framework Transformation via Ligand Release in a Family of Crystalline 2D Coordination Polymers. Chemistry 2022; 28:e202201408. [PMID: 35675317 PMCID: PMC9543667 DOI: 10.1002/chem.202201408] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2022] [Indexed: 11/13/2022]
Abstract
A family of seven silver(I)‐perfluorocarboxylate‐quinoxaline coordination polymers, [Ag4(O2CRF)4(quin)4] 1–5 (RF=(CF2)n‐1CF3)4, n=1 to 5); [Ag4(O2C(CF2)2CO2)2(quin)4] 6; [Ag4(O2CC6F5)4(quin)4] 7 (quin=quinoxaline), denoted by composition as 4 : 4 : 4 phases, was synthesised from reaction of the corresponding silver(I) perfluorocarboxylate with excess quinoxaline. Compounds 1–7 adopt a common 2D layered structure in which 1D silver‐perfluorcarboxylate chains are crosslinked by ditopic quinoxaline ligands. Solid‐state reaction upon heating, involving loss of one equivalent of quinoxaline, yielding new crystalline 4 : 4 : 3 phases [Ag4(O2C(CF2)n‐1CF3)4(quin)3]n (8–10, n=1 to 3), was followed in situ by PXRD and TGA studies. Crystal structures were confirmed by direct syntheses and structure determination. The solid‐state reaction converting 4 : 4 : 4 to 4 : 4 : 3 phase materials involves cleavage and formation of Ag−N and Ag−O bonds to enable the structural rearrangement. One of the 4 : 4 : 3 phase coordination polymers (10) shows the remarkably high dielectric constant in the low electric field frequency range.
Collapse
|
26
|
Considerations on Gated CO 2 Adsorption Behavior in One-Dimensional Porous Coordination Polymers Based on Paddlewheel-Type Dimetal Complexes: What Determines Gate-Opening Temperatures? Inorg Chem 2022; 61:12698-12707. [PMID: 35916903 DOI: 10.1021/acs.inorgchem.2c01734] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Low-dimensional coordination polymers such as one-dimensional chains often exhibit gated guest sorption accompanying structural transition at a temperature (TG), which is associated with an external pressure of the guest (PG) characteristic to the material and guest used. This phenomenon can be evaluated using the Clausius-Clapeyron relationship with the equation d(ln PG)/d(1/TG) = ΔHG/R, where ΔHG and R are the transition enthalpy and gas constant, respectively. In this study, gated CO2 adsorption behavior was investigated in a one-dimensional chain based on a benzoate-bridged paddlewheel diruthenium(II,II) complex with a phenazine (phz) linker, [Ru2(p-MeOPhCO2)4(phz)] (1; p-MeOPhCO2- = p-anisate). Surprisingly, 1 underwent gate opening (GO)/closing (GC) at a much higher TG, e.g., 385 K for GC, under PCO2 = 100 kPa than those previously reported for such chain compounds, which usually appeared in the temperature range of 200-270 K. The transition entropy ΔSG in each system plays a key role in shifting TG; 1 results in a much smaller |ΔSG| in the series. Only 1 produced a CO2-accessible two-dimensional topological pore in its CO2-adsorbed phase 1⊃CO2, whereas the others reported previously produced one-dimensional or discrete topological pores for CO2 accommodation, strongly reflecting the degree of freedom of CO2 molecules in pores, which is related to ΔSG.
Collapse
|
27
|
A spin-crossover framework endowed with pore-adjustable behavior by slow structural dynamics. Nat Commun 2022; 13:3510. [PMID: 35717382 PMCID: PMC9206640 DOI: 10.1038/s41467-022-31274-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/10/2021] [Accepted: 06/11/2022] [Indexed: 12/04/2022] Open
Abstract
Host-guest interactions play critical roles in achieving switchable structures and functionalities in porous materials, but design and control remain challenging. Here, we report a two-dimensional porous magnetic compound, [FeII(prentrz)2PdII(CN)4] (prentrz = (1E,2E)−3-phenyl-N-(4H-1,2,4-triazol-4-yl)prop-2-en-1-imine), which exhibits an atypical pore transformation that directly entangles with a spin state transition in response to water adsorption. In this material, the adsorption-induced, non-uniform pedal motion of the axial prentrz ligands and the crumpling/unfolding of the layer structure actuate a reversible narrow quasi-discrete pore (nqp) to large channel-type pore (lcp) change that leads to a pore rearrangement associated with simultaneous pore opening and closing. The unusual pore transformation results in programmable adsorption in which the lcp structure type must be achieved first by the long-time exposure of the nqp structure type in a steam-saturated atmosphere to accomplish the gate-opening adsorption. The structural transformation is accompanied by a variation in the spin-crossover (SCO) property of FeII, i.e., two-step SCO with a large plateau for the lcp phase and two-step SCO with no plateau for the nqp phase. The unusual adsorption-induced pore rearrangement and the related SCO property offer a way to design and control the pore structure and physical properties of dynamic frameworks. Host-guest interactions can play a critical role in achieving switchable porous materials, but controlling them remains challenging. Here the authors report an atypical pore rearrangement in a magnetic 2D porous framework upon water adsorption; the structural transformation affects the magnetic properties of the material.
Collapse
|
28
|
Room-Temperature Reversible Chemisorption of Carbon Monoxide on Nickel(0) Complexes. J Am Chem Soc 2022; 144:8818-8826. [PMID: 35504015 PMCID: PMC9348812 DOI: 10.1021/jacs.2c02870] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
![]()
Chemisorption
on organometallic-based adsorbents is crucial for
the controlled separation and long-term storage of gaseous molecules.
The formation of covalent bonds between the metal centers in the adsorbents
and the targeted gases affects the desorption efficiency, especially
when the oxidation state of the metal is low. Herein, we report a
pressure-responsive nickel(0)-based system that is able to reversibly
chemisorb carbon monoxide (CO) at room temperature. The use of N-heterocyclic carbene ligands with hemi-labile N-phosphine oxide substituents facilitates both the adsorption
and desorption of CO on nickel(0) via ligand substitution. Ionic liquids
were used as the reaction medium to enhance the desorption rate and
establish a reusable system. These results showcase a way for the
sustainable chemisorption of CO using a zero-valent transition-metal
complex.
Collapse
|
29
|
Abstract
Strategic design of the stationary phase in liquid chromatography (LC) is crucial for modern separation science. Herein, a design approach using mixed metal-organic frameworks (MOFs) as tunable LC stationary phases is proposed. Three MOFs with an isostructural pillared-layer structure are employed, with pore sizes tuned by the systematic design of the constituent ligands, using 1,4-benzenedicarboxylate (bdc), 1,4-naphthalenedicarboxylate (ndc), and 9,10-anthracenedicarboxylate (adc). Packed columns filled with the MOFs and their mixed-particle/solid-solution stationary phases are prepared and examined for the retention capability of polyethylene glycol (PEG) in LC. While the MOF-packed columns filled with binary mixtures of different MOF particles provide good control of the retention with respect to the particle mixing ratio, the columns filled with mixed-linker solid-solution MOFs show a significant multicomponent effect on the retention behavior. Specifically, mixed-linker solid-solution MOFs consisting of bdc/ndc binary ligands are found to show a strong retention that surpasses even their parent MOFs, namely, pure bdc- and ndc-MOF stationary phases. The retention behavior on the MOF-packed columns is explained by the specific nanostructures of the solid-solution MOFs, which affects the balance between substrate affinity and adsorption kinetics into the MOF pores, dictating the total retention capability. The results provide an extra dimension for stationary phase design using MOFs as a promising recognition medium for LC.
Collapse
|
30
|
Isotope-selective pore opening in a flexible metal-organic framework. SCIENCE ADVANCES 2022; 8:eabn7035. [PMID: 35417239 PMCID: PMC9007508 DOI: 10.1126/sciadv.abn7035] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/14/2021] [Accepted: 02/23/2022] [Indexed: 06/14/2023]
Abstract
Flexible metal-organic frameworks that show reversible guest-induced phase transitions between closed and open pore phases have enormous potential for highly selective, energy-efficient gas separations. Here, we present the gate-opening process of DUT-8(Ni) that selectively responds to D2, whereas no response is observed for H2 and HD. In situ neutron diffraction directly reveals this pressure-dependent phase transition. Low-temperature thermal desorption spectroscopy measurements indicate an outstanding D2-over-H2 selectivity of 11.6 at 23.3 K, with high D2 uptake. First-principles calculations coupled with statistical thermodynamics predict the isotope-selective gate opening, rationalized by pronounced nuclear quantum effects. Simulations suggest DUT-8(Ni) to remain closed in the presence of HT, while it also opens for DT and T2, demonstrating gate opening as a highly effective approach for isotopolog separation.
Collapse
|
31
|
Cooperative light-induced breathing of soft porous crystals via azobenzene buckling. Nat Commun 2022; 13:1951. [PMID: 35414051 PMCID: PMC9005654 DOI: 10.1038/s41467-022-29149-z] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2021] [Accepted: 01/28/2022] [Indexed: 12/04/2022] Open
Abstract
Although light is a prominent stimulus for smart materials, the application of photoswitches as light-responsive triggers for phase transitions of porous materials remains poorly explored. Here we incorporate an azobenzene photoswitch in the backbone of a metal-organic framework producing light-induced structural contraction of the porous network in parallel to gas adsorption. Light-stimulation enables non-invasive spatiotemporal control over the mechanical properties of the framework, which ultimately leads to pore contraction and subsequent guest release via negative gas adsorption. The complex mechanism of light-gated breathing is established by a series of in situ diffraction and spectroscopic experiments, supported by quantum mechanical and molecular dynamic simulations. Unexpectedly, this study identifies a novel light-induced deformation mechanism of constrained azobenzene photoswitches relevant to the future design of light-responsive materials. The application of photoswitches as light-responsive triggers for phase transitions of porous materials remains poorly explored. Here, the authors report a light-responsive flexible metal-organic framework which undergoes pore contraction upon combined application of light irradiation and adsorption stress via a buckling process of the framework-embedded azobenzene photoswitch.
Collapse
|
32
|
Anion Regulates scu Topological Porous Coordination Polymers into the Acetylene Trap. ACS APPLIED MATERIALS & INTERFACES 2022; 14:13550-13559. [PMID: 35274924 DOI: 10.1021/acsami.2c01940] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
The development of efficient porous absorbents with high uptake and selectivity remains a great challenge, especially for the recovery of acetylene (C2H2) from its carbon dioxide (CO2)-containing mixtures. Here, we propose and report an anion-planting strategy for regulating the scu topological porous coordination polymers (PCPs) into the C2H2 trap. The three electronegative anions SiF62-, TiF62-, and ZrF62-, in addition to the ligand of 3,5-di(1H-imidazol-1-yl)benzoic acid (HL) and Cu2+ ion, were employed to construct highly porous PCPs (NTU-60, NTU-61, and NTU-62) with varied window aperture. Especially, due to a matching distance (dF-F) of 5.7 Å along the c-axis, the limited space that can be assigned as a single C2H2 trap enables NTU-61 to show optimal ability for C2H2 (van der Waals (vdW) parameters of the two H atoms: ∼5.72 Å) recognition, validated by Grand Canonical Monte Carlo (GCMC) calculations and Raman spectra. These characteristics allow the NTU-series to show higher C2H2 uptake, as well as excellent C2H2/CO2 separation performance under dynamic conditions. The molecular insight and strategy here not only permit balanced adsorption and separation in a single domain but also exhibit an opportunity to develop advanced adsorbents in nearly all frameworks with lattice or coordinated ions, which may act as the platforms for various selective guest trappings with on-demand time and/or spatial resolution.
Collapse
|
33
|
Cuprous‐based composite ionic liquids for the selective absorption of
CO
: Experimental study and thermodynamic analysis. AIChE J 2022. [DOI: 10.1002/aic.17631] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
|
34
|
Design of a MOF based on octa-nuclear zinc clusters realizing both thermal stability and structural flexibility. Chem Commun (Camb) 2022; 58:1139-1142. [PMID: 34981084 DOI: 10.1039/d1cc05893b] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
An octa-nuclear zinc (Zn8) cluster-based two-fold interpenetrated metal-organic framework (MOF) of [(CH3)2NH2]2[Zn8O3(FDC)6]·7DMF (denoted as Zn8-as; H2FDC = 9H-fluorene-2,7-dicarboxylic acid; DMF = N,N-dimethylformamide) was synthesized by the reaction of a hard base of a curved dicarboxylate ligand (H2FDC) with the borderline acid of Zn(II) under solvothermal conditions. Zn8-as shows significant crystal volume shrinkage upon heating, yielding a solvate-free framework of [(CH3)2NH2]2[Zn8O3(FDC)6] (Zn8-de). Zn8-de displays gated adsorption for C2H2 and type-I adsorption for CO2, attributed to the framework flexibility and the different interactions between the gas molecules and the host framework.
Collapse
|
35
|
Gating effect for gas adsorption in microporous materials-mechanisms and applications. Chem Soc Rev 2022; 51:1139-1166. [PMID: 35040460 DOI: 10.1039/d1cs00822f] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/30/2022]
Abstract
In the past two decades, various microporous materials have been developed as useful adsorbents for gas adsorption for a wide range of industries. Considerable efforts have been made to regulate the pore accessibility in microporous materials for the manipulation of guest molecules' admission and release. It has long been known that some microporous adsorbents suddenly become highly accessible to guest molecules at specific conditions, e.g., above a threshold pressure or temperature. This anomalous adsorption behavior results from a gating effect, where a structural variation of the adsorbent leads to an abrupt change in the gas admission. This review summarizes the mechanisms of the gating effect, which can be a result of the deformation of the framework (e.g., expansion, contraction, reorientation, and sliding of the unit cells), the vibration of the pore-keeping groups (e.g., rotation, swing, and collapse of organic linkers), and the oscillation of the pore-keeping ions (e.g. cesium, potassium, etc.). These structural variations are induced either by the host-guest interaction or by an external stimulus, such as temperature or light, and account for the gating effect at a threshold value of the stimulus. Emphasis is given to the temperature-regulated gating effect, where the critical admission temperature is dictated by the combined effect of the gate opening and thermodynamic factors and plays a key role in regulating guest admission. Molecular simulations can improve our understanding of the gate opening/closing transitions at the atomic scale and enable the construction of quantitative models to describe the gated adsorption behaviour at the macroscale level. The gating effect in porous materials has been widely applied in highly selective gas separation and offers great potential for gas storage and sensing.
Collapse
|
36
|
Substituent-Induced Electron-Transfer Strategy for Selective Adsorption of N 2 in MIL-101(Cr)-X Metal-Organic Frameworks. ACS APPLIED MATERIALS & INTERFACES 2022; 14:2146-2154. [PMID: 34935344 DOI: 10.1021/acsami.1c22866] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
N2 removal is of great significance in high-purity O2 production and natural gas purification. Here, we present a substituent-induced electron-transfer strategy for improving N2 capture performance by controlling the Lewis acidity of Cr(III) metal unsaturated sites in Cr-based metal-organic frameworks. With the enhancement of the electron-withdrawing ability of the modified group on terephthalic acid (-NO2 > -CH3), the N2 adsorption ability of MIL-101(Cr)-X was improved significantly. For MIL-101(Cr)-NO2, the adsorption enthalpy of N2 at zero coverage was 30.01 kJ/mol, which was much larger than that of MIL-101(Cr)-CH3 (14.31 kJ/mol). In situ infrared spectroscopy studies, Bader charges, and density functional theory calculations showed that the presence of -NO2 could enhance the Lewis acidity of Cr(III) metal unsaturated sites, which resulted in a strong interaction affinity for N2. The adsorption isotherms indicated that MIL-101(Cr)-NO2 had an excellent N2/O2 (79/21, v/v) selectivity of up to 10.8 and a good N2/CH4 separation performance (SN2/CH4 = 2.8, 298 K, 1 bar). Breakthrough curves showed that MIL-101(Cr)-NO2 had great potential for the efficient separation of N2/O2 and N2/CH4.
Collapse
|
37
|
A {Ni
12
}‐Wheel‐Based Metal–Organic Framework for Coordinative Binding of Sulphur Dioxide and Nitrogen Dioxide. Angew Chem Int Ed Engl 2022. [DOI: 10.1002/ange.202115585] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
38
|
Selective luminescent sensing of metal ions and nitroaromatics over a porous mixed-linker cadmium( ii) based metal–organic framework. NEW J CHEM 2022. [DOI: 10.1039/d1nj04025a] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
A potential luminescent sensor based on porous metal organic framework for the detection of metal ions (Al3+, Fe3+ or Cr3+) and nitro-explosive, 2,4,6-tri-nitrophenol has been discovered. MOF is capable of detecting aqueous phase analyte through luminescent sensing.
Collapse
|
39
|
|
40
|
Cu-Organic framework-derived V-doped carbon nanostructures for organic dye removal. Dalton Trans 2021; 50:18173-18185. [PMID: 34859813 DOI: 10.1039/d1dt03450b] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
Abstract
Metal-organic frameworks (MOFs) have recently emerged as a type of uniformly and periodically atom-distributed precursor and efficient self-sacrificial template to fabricate hierarchical porous-carbon-related nanostructured functional materials. In this work, we used Cu(II) ions and aromatic dicarboxylic acid to construct [Cu3(4,4'-oba)2(μ2-OH)2(H2O)2]n (4,4'-H2oba = 4,4'-oxybisbenzoic acid) as a precursor for the preparation of carbon nanostructures. Doping foreign elements into intrinsic MOF-based nanomaterials is an effective way to enhance the adsorption property and photocatalytic activity; thus, we designed a facile method to synthesize a vanadium-doped mixture of Cu2O and Cu nanoparticles encapsulated in a Cu-MOF-derived carbon nanostructure (C-V-1) in this work for the first time. Benefiting from the protection of the carbon shell and regulation of the electronic structure by doping vanadium and phase-mixing Cu2O and Cu, the adsorption capacities of C-V-1 for MB, RhB, MO, CR and GV at room temperature are 174.13, 147.06, 179.92, 275.90 and 611.81 mg g-1 in 240 min, respectively, while the photocatalytic degradation rates are 88.14% for MB, 79.80% for RhB, 71.31% for MO, and 71.19% for CR after 4 h. In addition, the degradation rate is larger than 99.01% for GV after only 30 min of UV irradiation. This strategy of using a diverse MOF as a structural and compositional material to create a multifunctional composite/hybrid may expand the opportunities to explore highly efficient, fast and robust adsorbents and photocatalysts for water treatment.
Collapse
|
41
|
Multivariate Synergistic Flexible Metal‐Organic Frameworks with Superproton Conductivity for Direct Methanol Fuel Cells. Angew Chem Int Ed Engl 2021. [DOI: 10.1002/ange.202112922] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
42
|
Reversible switching of Cu-tetracarboxylic-based coordination polymers through in situ single-crystal-to-single-crystal structural transformation and their impact on carbon-based composite derivatives, fluorescence, and adsorption properties. J SOLID STATE CHEM 2021. [DOI: 10.1016/j.jssc.2021.122589] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
43
|
|
44
|
A {Ni12}-Wheel-Based Metal-Organic Framework for Coordinative Binding of Sulphur Dioxide and Nitrogen Dioxide. Angew Chem Int Ed Engl 2021; 61:e202115585. [PMID: 34843165 DOI: 10.1002/anie.202115585] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/16/2021] [Indexed: 11/07/2022]
Abstract
Air pollutions by SO 2 and NO 2 have caused significant risks on the environment and human health. Understanding the mechanism of active sites within capture materials is of fundamental importance to the development of new clean-up technologies. Here we report the crystallographic observation of reversible coordinative binding of SO 2 and NO 2 on open Ni(II) sites in a metal-organic framework (NKU-100) incorporating an unprecedented {Ni 12 }-wheel, which exhibits six open Ni(II) sites on desolvation. Immobilised gas molecules are further stabilised by cooperative host-guest interactions comprised of hydrogen bonds, π ··· π interactions and dipole interactions. At 298 K and 1.0 bar, NKU-100 shows adsorption uptakes of 6.21 and 5.80 mmol g -1 for SO 2 and NO 2 , respectively. Dynamic breakthrough experiments have confirmed the selective retention of SO 2 and NO 2 at low concentrations under dry conditions. This work will inspire the future design of efficient sorbents for the capture of SO 2 and NO 2 .
Collapse
|
45
|
Xylene Recognition in Flexible Porous Coordination Polymer by Guest-Dependent Structural Transition. ACS APPLIED MATERIALS & INTERFACES 2021; 13:52144-52151. [PMID: 34347426 DOI: 10.1021/acsami.1c10061] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Xylene isomers are crucial chemical intermediates in great demand worldwide; the almost identical physicochemical properties render their current separation approach energy consuming. In this study, we utilized the soft porous coordination polymer (PCP)'s isomer-specific structural transformation, realizing o-xylene (oX) recognition/separation from the binary and ternary isomer mixtures. This PCP has a flexible structure that contains flexible aromatic pendant groups, which both work as recognition sites and induce structural flexibility of the global framework. The PCP exhibits guest-triggered "breathing"-type structural changes, which are accompanied by the rearrangement of the intraframework π-π interaction. By rebuilding π-π stacking with isomer species, the PCP discriminated oX from the other isomers by its specific guest-loading configuration and separated oX from the isomer mixture via selective adsorption. The xylene-selective property of the PCP is dependent on the solvent; in diluted hexane solution, the PCP favors p-xylene (pX) uptake. The separation results combined with crystallographic analyses revealed the effect of the isomer selectivity of the PCP on xylene isomer separation via structural transition and demonstrated its potential as a versatile selective adsorptive medium for challenging separations.
Collapse
|
46
|
Solvent mediated photoluminescence responses over mixed-linker cadmium (II) based metal–organic frameworks. Polyhedron 2021. [DOI: 10.1016/j.poly.2021.115444] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
|
47
|
Artificial Metal-Peptide Assemblies: Bioinspired Assembly of Peptides and Metals through Space and across Length Scales. J Am Chem Soc 2021; 143:17316-17336. [PMID: 34618443 DOI: 10.1021/jacs.1c08487] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Abstract
The exploration of chiral crystalline porous materials, such as metal-organic complexes (MOCs) or metal-organic frameworks (MOFs), has been one of the most exciting recent developments in materials science owing to their widespread applications in enantiospecific processes. However, achieving specific tight-affinity binding and remarkable enantioselectivity toward important biomolecules is still challenging. Perhaps most critically, the lack of adaptability, compatibility, and processability in these materials severely impedes practical applications in chemical engineering and biological technology. In this Perspective, artificial metal-peptide assemblies (MPAs), which are achieved by the assembly of peptides and metals with nanometer-sized cavities or pores, is a new development that could address the current bottlenecks of chiral porous materials. Bioinspired assembly of pore-forming MPAs is not foreign to biological systems and has granted scientists an unprecedented level of control over the chiral recognition sites, conformational flexibility, cavity sizes, and hydrophilic segments through ultrafine-tuning of peptide-derived linkers. We will specifically discuss exemplary MPAs including structurally well-defined metal-peptide complexes and highly crystalline metal-peptide frameworks. With insights from these structures, the peptide assembly and folding by the closer cooperation of metal coordination and noncovalent interactions can create adaptable protein-like nanocavities undergoing a myriad of conformational variations that is reminiscent of enzymatic pockets. We also consider challenges to advancing the field, where the deployment of side-chain groups and manipulation of amino acid sequences are more likely to access the programmable, genetically encodable peptide-mediated porous materials, thus contributing to the enhanced enantioselective recognition as well as enabling key biochemical processes in next-generation versatile biomimetic materials.
Collapse
|
48
|
Integration of Fluorescent Functionality into Pressure-Amplifying Metal-Organic Frameworks. CHEMISTRY OF MATERIALS : A PUBLICATION OF THE AMERICAN CHEMICAL SOCIETY 2021; 33:7964-7971. [PMID: 35600608 PMCID: PMC9115756 DOI: 10.1021/acs.chemmater.1c01804] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/27/2021] [Revised: 09/06/2021] [Indexed: 06/15/2023]
Abstract
The flexibility of soft porous crystals, i.e., their ability to respond to external stimuli with structural changes, is one of the most fascinating features of metal-organic frameworks (MOFs). In addition to breathing and swelling phenomena of flexible MOFs, negative gas adsorption (NGA) and pressure amplification (PA) are the more recent discoveries in this field initially observed in the cubic DUT-49 framework. In recent years, the structural contraction was monitored by physisorption, X-ray diffraction, nuclear magnetic resonance (NMR), and electron paramagnetic resonance (EPR) techniques, providing only limited information about the electronic structure of the ligand. In this work, we designed a new ligand with a fluorescent core in the linker backbone and synthesized three new MOFs, isoreticular to DUT-49, denoted as DUT-140(M) (M-Cu, Co, Zn), crystallizing in the space group Fm3̅m. DUT-140(Cu) can be desolvated and is highly porous with an accessible apparent surface area of 4870 m2 g-1 and a pore volume of 2.59 cm3 g-1. Furthermore, it shows flexibility and NGA upon adsorption of subcritical gases. DUT-140(Zn), synthesized using postsynthetic metal exchange, could only be studied with guests in the pores. In addition to the investigation of the adsorption behavior of DUT-140(Cu), spectroscopic and computational methods were used to study the light absorption properties.
Collapse
|
49
|
Multivariate Synergistic Flexible Metal-Organic Frameworks with Superproton Conductivity for Direct Methanol Fuel Cells. Angew Chem Int Ed Engl 2021; 60:26577-26581. [PMID: 34648226 DOI: 10.1002/anie.202112922] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/22/2021] [Indexed: 11/06/2022]
Abstract
Improving proton conductivity and fabricating viable metal-organic frameworks (MOFs) based proton exchange membranes (PEMs) are central issues exploiting electrolyte MOFs. We aim to design multivariate flexibility synergistic strategy to achieve Flexible MOFs (FMOFs) with high conductivity at a wide range of humidity. In situ powder X-ray diffraction (PXRD) and temperature-dependent Fourier transform infrared spectra (FT-IR) prove the synergistic self-adaption between dynamic torsion of alkyl sulfonic acid and dynamic breathing of FMOF, forming a continuous hydrogen-bonding networks to maintain high conductivity. Based on the convincing proton conductivity, we construct a series of long-term durable MOF-based PEMs that serve as a bridge between MOF and fuel cell. Consequently, the membrane electrode assembly (MEA) of the flexible PMNS1-40 exhibits a maximum single-cell power density of 34.76 mW cm-2 and hopefully opens doors to evaluate the practical application of proton-conducting MOFs in direct methanol fuel cells.
Collapse
|
50
|
Abstract
Coordinatively unsaturated metal sites within certain zeolites and metal-organic frameworks can strongly adsorb a wide array of substrates. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through physical interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that nondissociative chemisorption of H2 at the trigonal pyramidal Cu+ sites in the metal-organic framework CuI-MFU-4l occurs via the intermediacy of a metastable physisorbed precursor species. In situ powder neutron diffraction experiments enable crystallographic characterization of this intermediate, the first time that this has been accomplished for any material. Evidence for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. The activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu+ coordination environment that enhances π-backbonding with H2. Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.
Collapse
|