Thermoelectric energy conversion with solid electrolytes

Recent advances in ionic thermoelectric systems and theoretical modelling

Converting waste heat from solar radiation and industrial processes into useable electricity remains a challenge due to limitations of traditional thermoelectrics. Ionic thermoelectric (i-TE) materials offer a compelling alternative to traditional thermoelectrics due to their excellent ionic thermopower, low thermal conductivity, and abundant material options. This review categorizes i-TE materials into thermally diffusive and thermogalvanic types, with an emphasis on the former due to its superior thermopower. This review also highlights the i-TE materials for creating ionic thermoelectric supercapacitors (ITESCs) that can generate significantly higher voltages from low-grade heat sources compared to conventional technologies. Additionally, it explores thermogalvanic cells and combined devices, discussing key optimization parameters and theoretical modeling approaches for maximizing material and device performance. Future directions aim to enhance i-TE material performance and address low energy density challenges for flexible and wearable applications. Herein, the cutting-edge of i-TE materials are comprehensively outlined, empowering researchers to develop next-generation waste heat harvesting technologies for a more sustainable future.

A Novel Forked-Finger Electrode-Structured Thermoelectric Module with High Output Power

Thermoelectric harvesting technology is a clean and friendly energy-conversion technology. In the π-type traditional thermoelectric module (TEM), n- and p-type thermoelectric legs are electrically connected in a series to generate large temperature differences in the heat flow direction and to achieve a better module performance. However, damages to one thermoelectric leg could lead to the failure of the thermoelectric system. This work proposes a novel forked-finger electrode-structured thermoelectric module (FFTEM), which enables a simultaneous parallel electrical connection and thermal transfer in a homogeneous material’s thermoelectric leg set. The four thermoelectric legs share a common pair of electrodes, and this parallel structure makes the FFTEM benefit from low internal resistance, a high operating current, and high output power. The internal resistance and output power of the TEM are 4.25 mΩ and 1.766 mW, respectively, at a temperature difference of 40 °C. The internal resistance of the FFTEM is reduced to 0.81 mΩ, and the output power is increased to 13.81 mW. The FFTEM’s maximum output power achieved under temperature-dependent conditions is nine times that of the TEM’s output power. This FFTEM design provides a configuration to obtain a much higher output power, which could benefit future applications of thermoelectric devices.

Numerical and experimental performance evaluation of a laser-concentrated photovoltaic-thermoelectric generator hybrid system

Thermal management of concentrated photovoltaic (CPV) modules is essential to avoid the decrease in conversion efficiency caused by temperature rise during their operation. This is even more important for laser-concentrated CPV hybrid systems where out-of-control temperature rise is more likely to happen. In this research, a three-dimensional simulation model for a concentrated photovoltaic-thermoelectric (CPV-TE) hybrid system was studied to optimize its parameters and improve its conversion efficiency under laser radiation. Based on the simulation results, an integrated CPV-TE device was designed, fabricated, and tested under a high-power laser. The novel integrated CPV-TE system utilizes growing electrodes to encapsulate CPV directly on the TEG. Compared to conventional CPV-TE systems that utilize silicone-filled, the integrated CPV-TE system reduces contact thermal resistance and increases output power as well as conversion efficiency. To the best of our knowledge, this is the first study to discuss and optimize a CPV-TE hybrid system for laser radiation. In addition, this research improves the efficiency of laser energy conversion, increases the reliability and stability of the system, and may facilitate the promotion of optical wireless and fiber power transmission systems in future applications.

Hybrid Triboelectric Nanogenerators: From Energy Complementation to Integration

Energy collection ways using solar energy, wave, wind, or mechanical energy have attracted widespread attention for small self-powered electronic devices with low power consumption, such as sensors, wearable devices, electronic skin, and implantable devices. Among them, triboelectric nanogenerator (TENG) operated by coupling effect of triboelectrification and electrostatic induction has gradually gained prominence due to its advantages such as low cost, lightweight, high degree of freedom in material selection, large power, and high applicability. The device with a single energy exchange mechanism is limited by its conversion efficiency and work environment and cannot achieve the maximum conversion of energy. Thus, this article reviews the research status of different types of hybrid generators based on TENG in recent years. Hybrid energy generators will improve the output performance though the integration of different energy exchange methods, which have an excellent application prospect. From the perspective of energy complementation, it can be divided into harvesting mechanical energy by various principles, combining with harvesters of other clean energy, and converting mechanical energy or various energy sources into hydrogen energy. For integrating multitype energy harvesters, mechanism of single device and structural design of integrated units for different application scenarios are summarized. The expanding energy harvesting efficiency of the hybrid TENG makes the scheme of self-charging unit to power intelligent mobile electronic feasible and has practical significance for the development of self-powered sensor network.

Electrochemical Redox Refrigeration

The high conformational entropy change of the Fe(CN)63-/4- redox reaction can be used as the basis for a compact electrochemical refrigerator. This device is comparable to a liquid version of a Peltier cooler, with two distinct advantages: (1) the entropy change per carrier (1.5 mV/K) of the electrochemical refrigerant is more than 5 times larger than that of state-of-the-art solid thermoelectric materials; and (2) the liquid electrolyte can be advected continuously away from the cooling junction, so that Joule heating in the bulk element does not diminish the delivered cooling effect. In this work, we use infrared microscopy to visualize the thermal aspects of Fe(CN)63-/4- redox, and compare the estimated cooling to calculated values with and without electrolyte flow. While the temperature differences achieved in a single cell are small (~50 mK) and not enhanced by electrolyte flow, the cooling power density (~0.5 W/cm3) is high when normalized to the small electrode volume. Non-dimensional figures of merit are proposed to identify electrochemical redox species for maximizing the cooling effect.

Crystal Chemistry and Thermoelectric Properties of Type-I Clathrate Ba₈Ni∼3.8SixGe42.2-x (x = 0, 10, 20, 42.2)

Thermoelectric materials are actively considered for waste heat recovery applications. To improve the heat to electricity conversion efficiency, fundamental understanding on composition, crystal structure, and interrelation with the thermoelectric properties is necessary. Here, we report the chemical and thermoelectric properties of type-I clathrates Ba 8 Ni 3.8 Si x Ge 42.2 - x (x = 0, 10, 20, 42.2), to show that the Si substitution can retain the low lattice thermal conductivity as in pure Ge-based clathrates by adding defects (cage distortion) scattering and/or alloying effect, and the charge carrier concentration can be optimized and thus the electronic properties can be improved by tailoring the vacancy content. We demonstrate the vacancies in the pure Ge-based compound by Rietveld refinement, and possible vacancies in the quaternary compound by transport property measurements. We also show that, for intrinsic property studies in these compounds with such a complex crystal structure, a heat treatment for as cast alloys is necessary for phase purity and composition homogeneity. The highest Z T value of 0.19 at 550 ° C is reached in the compound with x = 10 .

Grating-structured freestanding triboelectric-layer nanogenerator for harvesting mechanical energy at 85% total conversion efficiency

A newly-designed triboelectric nanogenerator is demonstrated which is composed of a grating-segmented freestanding triboelectric layer and two groups of interdigitated electrodes with the same periodicity. The sliding motion of the grating units across the electrode fingers can be converted into multiple alternating currents through the external load due to the contact electrification and electrostatic induction. Working in non-contact mode, the device shows excellent stability and the total conversion efficiency can reach up to 85% at low operation frequency.

Emerging electrochemical energy conversion and storage technologies

Electrochemical cells and systems play a key role in a wide range of industry sectors. These devices are critical enabling technologies for renewable energy; energy management, conservation, and storage; pollution control/monitoring; and greenhouse gas reduction. A large number of electrochemical energy technologies have been developed in the past. These systems continue to be optimized in terms of cost, life time, and performance, leading to their continued expansion into existing and emerging market sectors. The more established technologies such as deep-cycle batteries and sensors are being joined by emerging technologies such as fuel cells, large format lithium-ion batteries, electrochemical reactors; ion transport membranes and supercapacitors. This growing demand (multi billion dollars) for electrochemical energy systems along with the increasing maturity of a number of technologies is having a significant effect on the global research and development effort which is increasing in both in size and depth. A number of new technologies, which will have substantial impact on the environment and the way we produce and utilize energy, are under development. This paper presents an overview of several emerging electrochemical energy technologies along with a discussion some of the key technical challenges.

Synthetic protocells to mimic and test cell function

Synthetic protocells provide a new means to probe, mimic and deconstruct cell behavior; they are a powerful tool to quantify cell behavior and a useful platform to explore nanomedicine. Protocells are not simple particles; they mimic cell design and typically consist of a stabilized lipid bilayer with membrane proteins. With a finite number of well characterized components, protocells can be designed to maximize useful outputs. Energy conversion in cells is an intriguing output; many natural cells convert transmembrane ion gradients into electricity by membrane-protein regulated ion transport. Here, a synthetic cell system comprising two droplets separated by a lipid bilayer is described that functions as a biological battery. The factors that affect its electrogenic performance are explained and predicted by coupling equations of the electrodes, transport proteins and membrane behavior. We show that the output of such biological batteries can reach an energy density of 6.9 x 10(6) J m(-3), which is approximately 5% of the volumetric energy density of a lead-acid battery. The configuration with maximum power density has an energy conversion efficiency of 10%.