Nickel Oxide Interstratified α-Zirconium Phosphate, a Composite Exhibiting Ferromagnetic Behavior

Fabrication of new structures from a 3D cobalt phosphonate network: structural transformation and proton conductivity investigation

Three new compounds with novel structures were prepared from cobalt 318, among which, 0-dimensional structural compound 1 shows a higher proton conductivity.

Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Ni Supported on Zirconium Phosphate Catalysts

Crystal α-zirconium phosphate (α-ZrP) was prepared by a hydrothermal method and exfoliated into a layered structure by n-hexylamine (C₆H₁₃NH₂). Ni-based catalyst (Ni/ZrP) was promoted by loading nickel on the layered α-ZrP via ion exchange. The catalyst was performed to catalyze hydrodeoxygenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF), and a 68.1% yield of DMF and 100% conversion of HMF were achieved at 240 °C, 5 MPa H₂, and 20 h. The DMF yield can still retain 52.8% after five cycles. The characteristics of the catalyst were investigated via N₂ adsorption-desorption, X-ray diffraction, field emission scanning electron microscopy, high-resolution transmission electron microscopy, pyridine-adsorbed Fourier transform infrared (FTIR) spectra, FTIR spectra, inductively coupled plasma mass spectrometry, and thermogravimetric analysis-mass spectrometry, as well as Raman spectroscopy. A pathway from HMF to DMF was found with MF as the intermediate product, and DMF production was preferable via the -CH₂OH group hydrogenolysis of HMF over Lewis acidic sites of Ni/ZrP, which is caused by the zirconium vacant orbits.

Preparation of microspherical alpha-zirconium phosphate catalysts for conversion of fatty acid methyl esters to monoethanolamides

The performance of solid catalysts and catalyst supports is generally believed to be dependent on their morphology, surface area, and architecture. In order to fully exploit their attractive properties in actual practical applications, layered zirconium phosphate materials should be fabricated into macroscopic form. Here, we report the fabrication of microscopic spheres of alpha-zirconium phosphate (alpha-ZrP) by a spray-drying process. The layered alpha-ZrP nanoparticles were originally obtained using a synthesis route involving separate nucleation and aging steps (SNAS). The resulting products are composed of nanosize alpha-ZrP particles aggregated into solid microspheres with a diameter of 5-45 microm and a sphericity of 0.80. After calcination at 573 K, surface area of 43.8 m(2)/g could be obtained for alpha-ZrP microspheres, which is larger than that of the alpha-ZrP powder after similar thermal treatment (36.2 m(2)/g). Furthermore, the number of acidic sites of the alpha-ZrP microspheres is greater than for the alpha-ZrP powder due to its unique textual properties and higher surface area. The acylation reaction of fatty acid methyl esters (methyl stearate) with ethanolamine to form monoethanolamides was chosen as a probe reaction to evaluate the catalytic activity of the resulting microspherical alpha-ZrP materials, which showed high activity compared to the sample in the form of powders, with about 92.9% methyl stearate conversion at 393 K for 12 h. The enhanced performance in the reaction is determined by the large surface area and the increased number of acidic sites in the multiple-scales porosity of alpha-ZrP microspheres.

In situ crystallized zirconium phenylphosphonate films with crystals vertically to the substrate and their hydrophobic, dielectric, and anticorrosion properties

The in situ crystallization technique has been utilized to fabricate zirconium phenylphosphonate (ZrPP) films with their hexagonal crystallite perpendicular to the copper substrate. The micro/nano roughness surface structure, as well as the intrinsic hydrophobic characteristic of the surface functional groups, affords ZrPP films excellent hydrophobicity with water contact angle (CA) ranging from 134 degrees to 151 degrees , without any low-surface-energy modification. Particularly, in the corrosive solutions such as acidic or basic solutions over a wide pH from 2 to 12, no obvious fluctuation in CA was observed for all the ZrPP film. The k values of the hydrophobic ZrPP films are in the low-k range (k < 3.0), meeting the development of ultra-large-scale integration (ULSI) circuits. The hydrophobicity feature is proposed to bear ZrPP film a more stable low-k value in an ambient atmosphere. Besides, the polarization current of ZrPP films is reduced by 2 orders of magnitude, compared to that of the untreated copper substrate. Even deposited in a vacuum oven for 30 days at room temperature, ZrPP films also show excellent corrosion resistance, indicating a stable anticorrosion property.