A "Green" route to adipic acid: direct oxidation of cyclohexenes with 30 percent hydrogen peroxide

Simultaneous Capture of N2O and CO2 from a N2O/N2/CO2/O2 Mixture with a Ni(II)-Pyrazolecarboxylate Framework

Nitrous oxide (N2O) is a potent greenhouse gas and a major contributor to ozone depletion. Its primary industrial emission source is tail gas from adipic acid production, which typically comprises a mixture of N2O, CO2, N2, and O2. Current technologies for the removal of N2O and CO2 from tail gas are energy-intensive and operationally complex. Herein, for the first time, simultaneous capture of N2O and CO2 from the quaternary mixture is achieved using a Ni(II)-pyrazolecarboxylate framework, BUT-167. This material demonstrated an exceptional adsorption capacity (135.8 cm3 cm-3 at 40 kPa) and a high packing density (790 mg cm-3) for N2O, outperforming reported sorbents. Moreover, BUT-167 also exhibits a remarkable CO2 adsorption capacity (101.5 cm3 cm-3 at 4 kPa), achieving simultaneously high selectivity values of 257.6 for CO2/N2 (4:96, v/v) and 135.7 for N2O/N2 (40/60). Importantly, BUT-167 exhibits robust and outstanding dual-gas removal performance across multiple adsorption-desorption breakthrough cycles under both dry and humid conditions. The strong affinity toward CO2 and N2O could be attributed to multiple hydrogen bonding interactions facilitated by its highly confined channel structure, as confirmed through single-crystal X-ray diffraction analysis.

Doping Mo Triggers Charge Distribution Optimization and P Vacancy of Ni2P@Ni12P5 Heterojunction for Industrial Electrocatalytic Production of Adipic Acid and H2

Synchronous electrosynthesis of value-added adipic acid (AA) and H2 is extremely crucial for carbon neutrality. However, accomplishing the preparation of AA and H2 at large current density with high selectivity is still challenging. Herein, a robust Mo-doped Ni2P@Ni12P5 heterojunction with more P vacancies on Ni foam is proposed for accomplishing simultaneous electrooxidation of cyclohexanol (CHAOR) to AA and hydrogen evolution reaction (HER) at large current density. Combined X-ray photoelectron spectroscopy, X-ray absorption fine structure, and electron spin resonance confirm that Mo incorporation induces the charge redistribution of Ni2P@Ni12P5, where Mo adjusts electrons from Ni to P, and triggers more P vacancies. Further experimental and theoretical investigations reveal that the d-band center is upshifted, optimizing adsorption energies of water and hydrogen on electron-rich P site for boosting HER activity. Besides, more Ni3+ generated from electron-deficient Ni induced by Mo, alongside more OH* triggered from more P vacancies concurrently promote CHA dehydrogenation and C─C bond cleavage, decreasing energy barrier of CHAOR. Consequently, a two-electrode flow electrolyzer achieves industrial current density (>230 mA cm-2) with 85.7% AA yield, 100% Faradaic efficiency of H2 production. This study showcases an industrial bifunctional electrocatalyst for AA and H2 production with high productivity.

Multidimensional Engineering of Escherichia coli for Efficient Adipic Acid Synthesis From Cyclohexane

Adipic acid (AA), a key aliphatic dicarboxylic acid, is conventionally manufactured through energy-intensive, multi-step chemical processes with significant environmental impacts. In contrast, biological production methods offer more sustainable alternatives but are often limited by low productivity. To overcome these challenges, this study reports the engineering of a single Escherichia coli for efficient biosynthesis of AA starting from cyclohexanol (CHOL), KA oil (mixture of CHOL and cyclohexanone (CHONE)), or cyclohexane (CH). To start with, a comprehensive screening of rate-limiting enzymes is conducted, particularly focusing on cytochrome P450 monooxygenase, followed by the optimization of protein expression using strategies such as protein fusion, promoter replacement, and genome editing. Consequently, an engineered E. coli capable of efficiently converting either KA oil or CH into AA is obtained, achieving remarkable product titers of 110 and 22.6 g L-1, respectively. This represents the highest productivity record for the biological production of AA to date. Finally, this developed biocatalytic system is successfully employed to convert different cycloalkanes and cycloalkanols with varied carbon chain lengths into their corresponding dicarboxylic acids, highlighting its great potential as well as broad applicability for industrial applications.

p-π Conjugated Covalent Organic Frameworks Expedite Molecular Triplet Excitons for H2O2 Production Coupled with Biomass Upgrading

High-efficiency production of triplet states in covalent organic framework photocatalysts is crucial for high-selectivity oxygen (O2) reduction to hydrogen peroxide (H2O2). Herein, fluorine and partial fluorine atoms are incorporated into an olefin-linked triazine covalent organic framework (F-ol-COF and HF-ol-COF), in which the adjacent fluorine (F) atoms-olefinic bond forms p-π conjugation that induces spin-polarization under irradiation, thus expediting triplet excitons for activating O2 to singlet oxygen (1O2) and contributing to a high H2O2 selectivity (91%). Additionally, the feasibility of coupling H2O2 production with the valorization of 5-hydroxymethylfurfural (HMF) is exhibited. The F-ol-COF demonstrates a highly stable H2O2 yield rate of 12558 µmol g-1 h-1 with the HMF-to-functionalized furan conversion yield of 95%, much higher than the partially fluorinated COF (HF-ol-COF) and the non-fluorinated COF (H-ol-COF). Mechanistic studies reveal that F-incorporation promotes charge separation, intensifies the Lewis acidity of the carbon atoms on the olefinic bond as active sites for O2 adsorption, and provides highly concentrated holes at the triazine unit for HMF oxidation upgrading. This study suggests the attractive potential of rational design of porous-crystalline photocatalysts for high-efficiency photocatalytic O2 reduction to H2O2 and biomass upgrading.

Decatungstate-Based Ionic Liquid Highly Active Under Mild Conditions for Upgrading Recalcitrant Humins from Biorefineries

Among all the materials resulting from the recovery of biomass, humin coproducts are produced today on a large scale, particularly in the sugar industry and biorefineries. Humins formation, with typical yields between 10 and 50 wt %, significantly reduces the efficiency and economic viability of the processes. With their complex structure, low solubility, and low reactivity, their valorization constitutes a real challenge. This paper aims to establish the proof of concept for the transformation of recalcitrant humins into high-value-added biobased products using polyoxometalate-based ionic liquids (POM-ILs) under "mild" conditions. In this contribution, the POM-IL (P6,6,6,14)4[W10O32] is used in the presence of H2O2, at atmospheric pressure and 90 °C for just 1 h. This system proved to be a powerful oxidizing catalyst for the extensive depolymerization of humins and their valorization into platform molecules. Under these conditions, the humin powder underwent an almost complete oxidative dissolution in the 94-99% yield range, leading to the formation of various carboxylic acids of industrial interest and sugars.

Dynamic Phase Behavior of Surface-Active Fluorinated Ionic Liquid Epoxidation Catalysts

We report on the synthesis of amphiphobic fluorinated surface-active ionic liquid (FSAIL) epoxidation catalysts, which show reversible temperature-controlled solubility in water. The solubility of FSAILs containing the catalytically active perrhenate- and tungstate anions was studied in both the aqueous and the substrate phase, showing a significant solubility decrease in both media compared to their non-fluorinated congeners. It was shown that both the epoxide product and the catalyst additive phenylphosphonic acid (PPA) are efficient in transferring the FSAIL catalyst into the organic phase, rendering the reaction homogeneous. The FSAILs were used as catalysts for the epoxidation of olefins using aqueous H2O2 as oxidant, showing an exceptionally high catalytic activity at mild conditions. Catalyst recycling was demonstrated over ten consecutive runs by phase separation and subsequent product distillation.

Electrosynthesis of adipic acid with high faradaic efficiency within a wide potential window

Electrosynthesis of adipic acid (a precursor for nylon-66) from KA oil (a mixture of cyclohexanone and cyclohexanol) represents a sustainable strategy to replace conventional method that requires harsh conditions. However, its industrial possibility is greatly restricted by the low current density and competitive oxygen evolution reaction. Herein, we modify nickel layered double hydroxide with vanadium to promote current density and maintain high faradaic efficiency (>80%) within a wide potential window (1.5 ~ 1.9 V vs. reversible hydrogen electrode). Experimental and theoretical studies reveal two key roles of V modification, including accelerating catalyst reconstruction and strengthening cyclohexanone adsorption. As a proof-of-the-concept, we construct a membrane electrode assembly, producing adipic acid with high faradaic efficiency (82%) and productivity (1536 μmol cm-2 h-1) at industrially relevant current density (300 mA cm-2), while achieving >50 hours stability. This work demonstrates an efficient catalyst for adipic acid electrosynthesis with high productivity that shows industrial potential.

Molecular Engineering of Metal-Organic Frameworks for Boosting Photocatalytic Hydrogen Peroxide Production

The development of novel metal-organic frameworks (MOFs) as efficient photocatalysts for hydrogen peroxide production from water and oxygen is particularly interesting, yet remains a challenge. Herein, we have prepared four cyclic trinuclear units (CTUs) based MOFs, exhibiting good light absorption ability and suitable band gaps for photosynthesis of H2O2. However, Cu-CTU-based MOFs are not able to photocatalyzed the formation of H2O2, while the alteration of metal nodes from Cu-CTU to Ag-CTU dramatically enhances the photocatalytic performance for H2O2 production and the production rates can reach as high as 17476 μmol g-1 h-1 with an apparent quantum yield of 4.72 %, at 420 nm, which is much higher than most reported MOFs. The photocatalytic mechanism is comprehensively studied by combining the isotope labeling experiments and DFT calculation. This study provides new insights into the preparation of MOF photocatalysts with high activity for H2O2 production through molecular engineering.

Synthesis and characterization of mesoporous silica supported metallosalphen-azobenzene complexes: efficient photochromic heterogeneous catalysts for the oxidation of cyclohexane to produce KA oil

The oxidation of cyclohexane to produce KA oil (cyclohexanone and cyclohexanol) is important industrially but faces challenges such as low cyclohexane conversion at high KA oil selectivity, and difficult catalyst recyclability. This work reports the synthesis and evaluation of new heterogeneous catalysts consisting of Co(ii), Mn(ii), Ni(ii) and Cu(ii) salphen-azobenzene complexes [ML1] immobilized on amino-functionalized mesoporous silica (SBA-15, MCM-41, MCM-48) through coordination bonding. In the first step, the salphen-azobenzene ligand was synthesized and complexed with Co, Mn, Ni and Cu metal ions. In the second step, aminopropyltriethoxysilane (APTES) was grafted onto the surface of different types of commercial mesoporous silica. The immobilization of [ML1] onto the mesoporous silica surface and the thermal stability of the obtained materials were confirmed using different characterization techniques such as FT-IR, powder XRD, SEM, TEM, BET, and TGA. The obtained results revealed high dispersion of [ML1] through the silica surface. The catalytic activity of the prepared materials Silica-N-ML1 was evaluated on the cyclohexane oxidation to produce KA oil using various oxidants. The cis-trans isomerization of the azobenzene upon UV irradiation was found to affect the catalytic performance of Silica-N-ML1. The cis isomer of SBA-15-N-CoL1 exhibited the highest cyclohexane conversion (93%) and KA selectivity (92%) under mild conditions (60 °C, 6 h) using m-CPBA as oxidant. Moreover, The SBA-15-N-CoL1 showed high stability during four successive cycles.

Bioinspired Tetranuclear Manganese Cubane Complex as an Efficient Molecular Electrocatalyst for Two-Electron Water Oxidation Towards Hydrogen Peroxide

Stable homogeneous two-electron water oxidation electrocatalysts are highly demanded to understand the precise mechanism and reaction intermediates of electrochemical H2O2 production. Here we report a tetranuclear manganese complex with a cubane structure which can electrocatalyze water oxidation to hydrogen peroxide under alkaline and neutral conditions. Such a complex demonstrates an optimal Faradaic efficiency (FE) of 87 %, which is amongst (if not) the highest FE(H2O2) of reported homogeneous and heterogeneous electrocatalysts. In addition, active species were identified and co-catalysts were excluded through ESI-MS characterization. Furthermore, we identified water binding sites and isolated one-electron oxidation intermediate by chemical oxidation of the catalyst in the presence of water substrates. It is evident that efficient proton-accepting electrolytes avoid rapid proton building-up at electrode and substantially improve reaction rate and selectivity. Accordingly, we propose a two-electron catalytic cycle model for water oxidation to hydrogen peroxide with the bioinspired molecular electrocatalyst. The present work is expected to provide an ideal platform to elucidate the two-electron WOR mechanism at the atomic level.

A cyclic trinuclear silver complex for photosynthesis of hydrogen peroxide

The development of metal complexes for photosynthesis of hydrogen peroxide (H2O2) from pure water and oxygen using solar energy, especially in the absence of any additives (e.g., acid, co-catalysts, and sacrificial agents), is a worthwhile pursuit, yet still remains highly challenging. More importantly, the O2 evolution from the water oxidation reaction has been impeded by the classic bottleneck, the photon-flux-density problem of sunlight that could be attributed to rarefied solar radiation for a long time. Herein, we reported synthesis of boron dipyrromethene (BODIPY)-based cyclic trinuclear silver complexes (Ag-CTC), and they exhibited strong visible-light absorption ability, a suitable energy bandgap, excellent photochemical properties and efficient charge separation ability. The integration of BODIPY motifs as oxygen reduction reaction sites and silver ions as water oxidation reaction sites allows Ag-CTC to photosynthesize H2O2 either from pure water or from sea water in the absence of any additives with a high H2O2 production rate of 183.7 and 192.3 μM h-1, which is higher than that of other reported metal-based photocatalysts. The photocatalytic mechanism was systematically and ambiguously investigated by various experimental analyses and density functional theory (DFT) calculations. Our work represents an important breakthrough in developing a new Ag photocatalyst for the transformation of O2 into H2O2 and H2O into H2O2.

Metal Poly(heptazine imides) as Multifunctional Photocatalysts for Solar Fuel Production

Solar-driven photocatalysis employing particulate semiconductors represents a promising approach for sustainable production of valuable chemical feedstock. Metal poly(heptazine imide) (MPHI), a novel 2D ionic carbon nitride, has been recognized as an emerging photocatalyst with distinctive properties. In this minireview, we first delineate the forefront innovations of MPHI photocatalysts, spanning from synthetic strategies and solving structures to the exploration of novel properties. We place special emphasis on the structural design principles aimed at developing high-performance MPHI systems toward photocatalytic solar fuel production such as H2 evolution, H2O oxidation, H2O2 production and CO2 reduction. Finally, we discuss crucial insights and challenges in leveraging highly active MPHIs for efficient solar-to-chemical energy conversion.

Sustainable Adipic Acid Production via Paired Electrolysis of Lignin-Derived Phenolic Compounds with Water as Hydrogen and Oxygen Sources

Adipic acid (AA) is an important feedstock for nylon polymers and is industrially produced from fossil-derived aromatics via thermocatalysis. However, this process consumes explosive H2 and corrosive HNO3 as reductants and oxidants, respectively. Here, we report the direct synthesis of AA from lignin-derived phenolic compounds via paired electrolysis using bimetallic cooperative catalysts. At the cathode, phenol is hydrogenated on PtAu catalysts to form ketone-alcohol (KA) oil with 92% yield and 43% Faradaic efficiency (FE). At the anode, KA is electrooxidized into AA on CuCo2O4 catalysts, achieving a maximum of 85% yield and 84% FE. Experimental and theoretical studies reveal that the excellent catalytic activity can be ascribed to the enhanced absorption and activation capability of reactants on the bimetallic cooperative catalysts. A two-electrode flow electrolyzer for AA synthesis realizes a stable electrolysis at 2.5 A for over 200 h as well as 38.5% yield and 70.2% selectivity. This study offers a green and sustainable route for AA synthesis from lignin via paired electrolysis.

Single Zn Atoms with Acetate-Anion-Enabled Asymmetric Coordination for Efficient H2 O2 Photosynthesis

Exploring unique single-atom sites capable of efficiently reducing O2 to H2 O2 while being inert to H2 O2 decomposition under light conditions is significant for H2 O2 photosynthesis, but it remains challenging. Herein, we report the facile design and fabrication of polymeric carbon nitride (CN) decorated with single-Zn sites that have tailorable local coordination environments, which is enabled by utilizing different Zn salt anions. Specifically, the O atom from acetate (OAc) anion participates in the coordination of single-Zn sites on CN, forming asymmetric Zn-N3 O moiety on CN (denoted as CN/Zn-OAc), in contrast to the obtained Zn-N4 sites when sulfate (SO4 ) is adopted (CN/Zn-SO4 ). Both experimental and theoretical investigations demonstrate that the Zn-N3 O moiety exhibits higher intrinsic activity for O2 reduction to H2 O2 than the Zn-N4 moiety. This is attributed to the asymmetric N/O coordination, which promotes the adsorption of O2 and the formation of the key intermediate *OOH on Zn sites due to their modulated electronic structure. Moreover, it is inactive for H2 O2 decomposition under both dark and light conditions. As a result, the optimized CN/Zn-OAc catalyst exhibits significantly improved photocatalytic H2 O2 production activity under visible light irradiation.

Dual Regulation of Charge Separation and the Oxygen Reduction Pathway by Encapsulating Phosphotungstic Acid into the Cationic Covalent Organic Framework for Efficient Photocatalytic Hydrogen Peroxide Production

Previous research on covalent organic framework (COF)-based photocatalytic H2O2 synthesis from oxygen reduction focuses more on charge carrier separation but less on the electron utilization efficiency of O2. Herein, we put forward a facile approach to simultaneously promote charge separation and tailor the oxygen reduction pathway by introducing phosphotungstic acid (PTA) into the cationic COF skeleton. Experiments verified that PTA, as an electron transport medium, establishes a fast electron transfer channel from the COF semiconductor conductor band to the substrate O2; meanwhile, the reaction path is optimized by its catalytic cycle for preferable dioxygen capture and reduction in oxygen reduction reaction (ORR) kinetics. The existence of PTA promotes the rate and tendency of converting O2 into •O2- intermediates, which is conducive to boosting the photocatalytic activity and selectivity toward the sequential two-step single-electron ORR. As expected, compared to the pristine TTB-EB, the optimal PTA0.5@TTB-EB achieves a 2.2-fold improvement of visible-light-driven photocatalytic performance with a H2O2 production rate of 897.94 μmol·L-1·h-1 in pure water without using any sacrificial agents. In addition, owing to the robust electrostatic interaction and the confinement effect of porous TTB-EB channels, the PTA@TTB-EB composite possessed favorable stability.

Triple-Phase Photocatalytic H2O2 Production on a Janus Fiber Membrane with Asymmetric Hydrophobicity

Photocatalytic O2 reduction is an intriguing approach to producing H2O2, but its efficiency is often hindered by the limited solubility and mass transfer of O2 in the aqueous phase. Here, we design and fabricate a two-layered (2L) Janus fiber membrane photocatalyst with asymmetric hydrophobicity for efficient photocatalytic H2O2 production. The top layer of the membrane consists of superhydrophobic polytetrafluoroethylene (PTFE) fibers with a dispersed modified carbon nitride (mCN) photocatalyst. Amphiphilic Nafion (Naf) ionomer is sprayed onto this layer to modulate the microenvironment and achieve moderate hydrophobicity. In contrast, the bottom layer consists of bare PTFE fibers with high hydrophobicity. The elaborate structural configuration and asymmetric hydrophobicity feature of the optimized membrane photocatalyst (designated as 2L-mCN/F-Naf; F, PTFE) allow most mCN to be exposed with gas-liquid-solid triple-phase interfaces and enable rapid mass transfer of gaseous O2 within the hierarchical membrane, thus increasing the local O2 concentration near the mCN photocatalyst. As a result, the optimized 2L-mCN/F-Naf membrane photocatalyst shows remarkable photocatalytic H2O2 production activity, achieving a rate of 5.38 mmol g-1 h-1 under visible light irradiation.

Gas-Phase Characterization of Adipic Acid, 6-Hydroxycaproic Acid, and Their Thermal Decomposition Products by Rotational Spectroscopy

We report the spectroscopic investigation of two bifunctional aliphatic carboxylic acids, namely, adipic acid and 6-hydroxycaproic acid, in the gas phase by combining high-resolution rotational spectroscopy and supersonic expansions. Their pure rotational spectra were successfully identified and characterized. However, due to the low thermal stability of these two chemicals, the measured rotational spectra were significantly congested with transitions corresponding to their decomposition products upon heating. We observed cyclopentanone and adipic anhydride in the spectrum of adipic acid and ε-caprolactone and its monohydrate in the spectrum of 6-hydroxycaproic acid. On the basis of the distinct fingerprints of both carboxylic acids and a series of their decomposition products, the spectra were analyzed in a time-segmented manner. This provides valuable insights into the thermal decomposition mechanisms of these two samples over time, which highlights the robustness of microwave spectroscopy as a potent tool for analyzing complex chemical mixtures in a species-, isomer-, and conformer-selective way.

Directional Electrosynthesis of Adipic Acid and Cyclohexanone by Controlling the Active Sites on NiOOH

Dicarboxylic acids and cyclic ketones, such as adipic acid (AA) and cyclohexanone (CHN), are essential compounds for the chemical industry. Although their production by electrosynthesis using electricity is considered one of the most promising strategies, the application of such processes has been hampered by a lack of efficient catalysts as well as a lack of understanding of the mechanism. Herein, a series of monolithic msig/ea-NiOOH-Ni(OH)2/NF were prepared by means of self-dissolution of metal matrix components, interface growth, and electrochemical activation (denoted as msig/ea). The as-synthesized catalysts have three-dimensional cuboid-like structures formed by interconnecting nanosheets composed of NiOOH. By theoretically guided regulation of the amounts of Ni3+ and oxygen vacancies (OV), a 96.5% yield of CHN from cyclohexanol (CHA) dehydrogenation and a 93.6% yield of AA from CHN oxidation were achieved. A combined experimental and theoretical study demonstrates that CHA dehydrogenation and CHN oxidation were promoted by the formation of Ni3+ and the peroxide species (*OOH) on OV. This work provides a promising approach for directional electrosynthesis of high-purity chemicals with in-depth mechanistic insights.

Regioselective Coupling of Different Conjugate Esters by Magnesium Metal Reduction: A Route to Unsymmetrical Adipic Acid Esters

A novel tactic to synthesize unsymmetrical 3-aryladipic acid esters has been developed via magnesium-promoted reductive coupling of ethyl cinnamates with methyl acrylate. In the present methodology, 3-aryladipic acid derivatives were prepared with good functional group tolerance and a wide substrate scope under very mild reaction conditions in good yields. The application of this reaction to dienic acid esters led to the successful control of the reaction to give 5-aryl-oct-3-enedioic acid esters with high regioselectivity.

Efficient photocatalytic production of hydrogen peroxide using dispersible and photoactive porous polymers

Developing efficient artificial photocatalysts for the biomimetic photocatalytic production of molecular materials, including medicines and clean energy carriers, remains a fundamentally and technologically essential challenge. Hydrogen peroxide is widely used in chemical synthesis, medical disinfection, and clean energy. However, the current industrial production, predominantly by anthraquinone oxidation, suffers from hefty energy penalties and toxic byproducts. Herein, we report the efficient photocatalytic production of hydrogen peroxide by protonation-induced dispersible porous polymers with good charge-carrier transport properties. Significant photocatalytic hydrogen peroxide generation occurs under ambient conditions at an unprecedented rate of 23.7 mmol g-1 h-1 and an apparent quantum efficiency of 11.3% at 450 nm. Combined simulations and spectroscopies indicate that sub-picosecond ultrafast electron "localization" from both free carriers and exciton states at the catalytic reaction centers underlie the remarkable photocatalytic performance of the dispersible porous polymers.

An Unlocked Two-Dimensional Conductive Zn-MOF on Polymeric Carbon Nitride for Photocatalytic H2 O2 Production

Developing highly efficient catalytic sites for O2 reduction to H2 O2 , while ensuring the fast injection of energetic electrons into these sites, is crucial for artificial H2 O2 photosynthesis but remains challenging. Herein, we report a strongly coupled hybrid photocatalyst comprising polymeric carbon nitride (CN) and a two-dimensional conductive Zn-containing metal-organic framework (Zn-MOF) (denoted as CN/Zn-MOF(lc)/400; lc, low crystallinity; 400, annealing temperature in °C), in which the catalytic capability of Zn-MOF(lc) for H2 O2 production is unlocked by the annealing-induced effects. As revealed by experimental and theoretical calculation results, the Zn sites coordinated to four O (Zn-O4 ) in Zn-MOF(lc) are thermally activated to a relatively electron-rich state due to the annealing-induced local structure shrinkage, which favors the formation of a key *OOH intermediate of 2e- O2 reduction on these sites. Moreover, the annealing treatment facilitates the photoelectron migration from the CN photocatalyst to the Zn-MOF(lc) catalytic unit. As a result, the optimized catalyst exhibits dramatically enhanced H2 O2 production activity and excellent stability under visible light irradiation.

Janus Composite Particles and Interfacial Catalysis Thereby

Janus composite particles (JPs) with distinct compartmentalization of varied components thus performances and anisotropic shape display a variety of properties and have demonstrated great potentials in diversify practical applications. Especially, the catalytic JPs are advantageous for multi-phase catalysis with much easier separation of products and recycling the catalysts. In the first section of this review, typical methods to synthesize the JPs with varied morphologies are briefly surveyed in the category of polymeric, inorganic and polymer/inorganic composite. In the main section, recent progresses of the JPs in emulsion interfacial catalysis are summarized covering organic synthesis, hydrogenation, dye degradation, and environmental chemistry. The review will end by calling more efforts toward precision synthesis of catalytic JPs at large scale to meet the stringent requirements in practical applications such as catalytic diagnosis and therapy by the functional JPs.

Ultrafast Hole Transfer in Graphitic Carbon Nitride Imide Enabling Efficient H2O2 Photoproduction

Solar-driven photocatalysis is a promising approach for renewable energy application. H2O2 photocatalysis by metal-free graphitic carbon nitride has been gaining attention. Compared with traditional thermal catalysis, metal-free graphitic carbon nitride photocatalysis could lower material cost and achieve greener production of H2O2. Also, to better guide photocatalyst design, a fundamental understanding of the reaction mechanism is needed. Here, we develop a series of model cost-effective metal-free H2O2 photocatalysts made from graphitic carbon nitride (melem) and common imide groups. With 4,4'-oxydiphthalic anhydride (ODPA)-modified g-C3N4, a H2O2 yield rate of 10781 μmol/h·g·L could be achieved. Transient absorption and ex situ Fourier transform infrared (FTIR) measurements revealed an ultrafast charge transfer from the melem core to water with ∼3 ps to form unique N-OH intermediates. The electron withdrawing ability of the anhydride group plays a role in governing the rate of electron transfer, ensuring efficient charge separation. Our strategy represents a new way to achieve a low material cost, simple synthesizing strategy, good environment impact, and high H2O2 production for renewable energy application.

Photocatalytic Synthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Hydrogen peroxide is a powerful and green oxidant that allows for the oxidation of a wide span of organic and inorganic substrates in liquid media under mild reaction conditions, and forms only molecular water and oxygen as end products. Hydrogen peroxide is therefore used in a wide range of applications, for which the well-documented and established anthraquinone autoxidation process is by far the dominating production method at the industrial scale. As this method is highly energy consuming and environmentally costly, the search for more sustainable synthesis methods is of high interest. To this end, the article reviews the basis and the recent development of the photocatalytic synthesis of hydrogen peroxide. Different oxygen reduction and water oxidation mechanisms are discussed, as well as several kinetic models, and the influence of the main key reaction parameters is itemized. A large range of photocatalytic materials is reviewed, with emphasis on titania-based photocatalysts and on high-prospect graphitic carbon nitride-based systems that take advantage of advanced bulk and surface synthetic approaches. Strategies for enhancing the performances of solar-driven photocatalysts are reported, and the search for new, alternative, photocatalytic materials is detailed. Finally, the promise of in situ photocatalytic synthesis of hydrogen peroxide for water treatment and organic synthesis is described, as well as its coupling with enzymes and the direct in situ synthesis of other technical peroxides.

Selective alkane hydroxylation and alkene epoxidation using H2O2 and Fe(II) catalysts electrostatically attached to a fluorinated surface

Fe(II) complexes with pentadentate ligands, including N-heterocyclic carbene moieties, were prepared and electrostatically attached onto the perfluorinated surface of a mesoporous aluminosilicate. The heterogeneous catalysts were applied to the catalytic oxidation of cyclohexane and cyclohexene using H₂O₂ as an oxidant in CH₃CN, demonstrating high performance and selectivity in alkane hydroxylation and cyclohexene epoxidation.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Progress and prospective of heterogeneous catalysts for H2O2 production via anthraquinone process

This paper reviews the improvement in the field of catalytic hydrogenation of 2-ethylanthraquinone to 2-ethylanthrahydroquinone for the successful production of hydrogen peroxide. Hydrogen peroxide is being used in almost all industrial areas, particularly in the chemical industry and in environmental protection, as the most promising oxidant for cleaner and environmentally safer processes. A variety of hydrogenation catalysts have been introduced for hydrogenation of 2-ethylanthraquinone in the production of hydrogen peroxide via anthraquinone (AQ) process. The aim of the present study is to describe the catalysts used in the hydrogenation of 2-ethylanthraquinone and the reaction mechanism involved with different catalytic systems. The hydrogenation of 2-ethylanthraquinone using metals, alloy, bimetallic composite, and supported metal catalyst with the structural modifications has been incorporated for the production of hydrogen peroxide. The comprehensive comparison reveals that the supported metal catalysts required lesser catalyst amount, produced lower AQ decay, and provided higher catalyst activity and selectivity. Furthermore, the replacement of conventional catalysts by metal and metal alloy-supported catalyst rises as a hydrogenation trend, enhancing by several times the catalytic performance.

Reinventing the wheel: A critical look at one-world and circular chemistries

With the rise of environmental awareness among chemists, more and more programmatic frameworks try to guide chemists to conduct research in an ethical manner. While green chemistry remains the most popular and influential of these concepts, not all scholars choose to embrace it. One world chemistry and circular chemistry are examples of this new trend. They constitute an attempt to profoundly reshape the practice of chemistry along new lines to make the discipline more relevant to the changing social, environmental and economic reality. And yet, both concepts betray a lack of familiarity with the recent history of chemistry and of sustainability undermining their overall message. The article indicates that the history of chemistry can play a crucial role in enriching the conversation on the direction chemistry should take towards the socio-environmental transition.

Selective conversion of methane to cyclohexane and hydrogen via efficient hydrogen transfer catalyzed by GaN supported platinum clusters

Non-oxidative liquefaction of methane at room temperature and ambient pressure has long been a scientific "holy grail" of chemical research. Herein, we exploit an unprecedented catalytic transformation of methane exclusively to cyclohexane and hydrogen evolution through effective surface-hydrogen-transfer (SHT) at the heterojunctions boundary consisting of electron-rich platinum cluster (Pt) loaded on methane-activating gallium nitride (GaN) host. The experimental analysis demonstrates that the interface-induced overall reaction starts with methane aromatization to benzene and surface-bound hydrogen initiated by the Ga-N pairs, followed by the hydrogenation of benzene to cyclohexane with surface-bound hydrogen. The in-situ activated hydrogen at electron-rich metal Pt cluster is crucial for the hydrogenation and enables an outstanding selectivity (up to 92%) and productivity (41 μmol g-1) towards cyclohexane and hydrogen evolution concurrently at 300 °C, which is well-delivered after 5 recycling runs.

The soil bacterium, Corynebacterium glutamicum, from biosynthesis of value-added products to bioremediation: A master of many trades

Ever since its discovery in 1957, Corynebacterium glutamicum has become a well-established industrial strain and is known for its massive capability of producing various amino acids (like L-lysine and L-glutamate) and other value-added chemicals. With the rising demand for these bio-based products, the revelation of the whole genome sequences of the wild type strains, and the astounding advancements made in the fields of metabolic engineering and systems biology, our perspective of C. glutamicum has been revolutionized and has expanded our understanding of its strain development. With these advancements, a new era for C. glutamicum supremacy in the field of industrial biotechnology began. This led to remarkable progress in the enhancement of tailor-made over-producing strains and further development of the substrate spectrum of the bacterium, to easily accessible, economical, and renewable resources. C. glutamicum has also been metabolically engineered and used in the degradation/assimilation of highly toxic and ubiquitous environmental contaminant, arsenic, present in water or soil. Here, we review the history, current knowledge, progress, achievements, and future trends relating to the versatile metabolic factory, C. glutamicum. This review paper is devoted to C. glutamicum which is one of the leading industrial microbes, and one of the most promising and versatile candidates to be developed. It can be used not only as a platform microorganism to produce different value-added chemicals and recombinant proteins, but also as a tool for bioremediation, allowing to enhance specific properties, for example in situ bioremediation.

Photocatalytic H2O2 Generation Using Au-Ag Bimetallic Alloy Nanoparticles loaded on ZnO

Hydrogen peroxide (H2O2) is an important chemical as it is an environmentally friendly oxidant for organic synthesis and environmental remediation as well as a promising candidate for the liquid fuel. Photocatalytic generation of H2O2 is sustainable, and many efforts have been put into the development of new catalysts to gain high H2O2 yields. In this investigation, Au/ZnO, Ag/ZnO and Au-Ag/ZnO catalysts were prepared by the simultaneous impregnation of HAuCl4 and AgNO3 and they were used to generate H2O2 from a methanol/O2 system. It was demonstrated that Au/ZnO had the best performance at generating H2O2. The presence of Au on ZnO accelerated the generation of H2O2 on ZnO and facilitated H2O2 adsorption onto the catalyst surface, which resulted in the reaction kinetics changing from zero-order to first-order. Ag atoms on Ag/ZnO were unstable and would strip from the surface of ZnO during irradiation, decreasing the yield of H2O2. The stabilization of Ag on Au-Ag/ZnO depended on the ratio of Au and Ag. Au0.1Ag0.2/ZnO was a stable catalyst and it showed that the presence of Ag promoted the formation and decomposition of peroxide, simultaneously.

Research Progress on the Construction of Artificial Pathways for the Biosynthesis of Adipic Acid by Engineered Microbes

Adipic acid is an important bulk chemical used in the nylon industry, as well as in food, plasticizers and pharmaceutical fields. It is thus considered one of the most important 12 platform chemicals. The current production of adipic acid relies on non-renewable petrochemical resources and emits large amounts of greenhouse gases. The bio-production of adipic acid from renewable resources via engineered microorganisms is regarded as a green and potential method to replace chemical conversion, and has attracted attention all over the world. Herein we review the current status of research on several artificial pathways for the biosynthesis of adipic acid, especially the reverse degradation pathway, which is a full biosynthetic method and has achieved the highest titer of adipic acid so far. Other artificial pathways including the fatty acid degradation pathway, the muconic acid conversion pathway, the polyketide pathway, the α-ketopimelate pathway and the lysine degradation pathway are also discussed. In addition, the challenges in the bio-production of adipic acid via these artificial pathways are analyzed and the prospects are presented with the intention of providing some significant points for the promotion of adipic acid biosynthesis.

Continuous Homogeneous Catalytic Oxidation of C-H Bonds by Metal-Free Carbon Dots with a Poly(ascorbic acid) Structure

The activation of the C-H bond, a necessary step to get high-value-added compounds, is one of the most important issues in modern catalysis. Combining the advantages of both homogeneous and heterogeneous catalysis, a certain continuous homogeneous process should be one of the ideal routes for the catalytic activation of C-H bonds. Here, through machine learning (ML), we predicted and fabricated metal-free carbon dot (C-Dot) homogeneous catalysts for C-H bond oxidation. These C-Dots have an ascorbic acid unit based polymer-like structure with a polymerization degree in the range of 3-10. With C-Dots as the catalyst, three groups (aliphatic, aromatic, and cycloalkanes) of 10 hydrocarbon molecules were tested, proving its generality for the catalytic oxidation of the C-H bond. A typical example of cyclohexane that was selectively oxidized to adipic acid (AA) by using a circulation and phase-transfer process demonstrates its critical advantages, such as the continuous and large-scaled producing ability of the homogeneous catalysis process. The one-pass conversion efficiency of cyclohexane to AA reaches 77.49% with selectivity up to 84.24% in 4 h. The yield of 16.32% per hour is about 4 times over that of modern technology. Theoretical calculations suggested that the O2 activation on C-Dots plays a crucial role in determining the reaction rate of the entire catalytic oxidation process of cyclohexane.

Efficient Oxidation of Cyclohexane over Bulk Nickel Oxide under Mild Conditions

Nickel oxide powder was prepared by simple calcination of nickel nitrate hexahydrate at 500 °C for 5 h and used as a catalyst for the oxidation of cyclohexane to produce the cyclohexanone and cyclohexanol—KA oil. Molecular oxygen (O₂), hydrogen peroxide (H₂O₂), t-butyl hydrogen peroxide (TBHP) and meta-chloroperoxybenzoic acid (m-CPBA) were evaluated as oxidizing agents under different conditions. m-CPBA exhibited higher catalytic activity compared to other oxidants. Using 1.5 equivalent of m-CPBA as an oxygen donor agent for 24 h at 70 °C, in acetonitrile as a solvent, NiO powder showed exceptional catalytic activity for the oxidation of cyclohexane to produce KA oil. Compared to different catalytic systems reported in the literature, for the first time, about 85% of cyclohexane was converted to products, with 99% KA oil selectivity, including around 87% and 13% selectivity toward cyclohexanone and cyclohexanol, respectively. The reusability of NiO catalyst was also investigated. During four successive cycles, the conversion of cyclohexane and the selectivity toward cyclohexanone were decreased progressively to 63% and 60%, respectively, while the selectivity toward cyclohexanol was increased gradually to 40%.

Porphyrins and Phthalocyanines on Solid-State Mesoporous Matrices as Catalysts in Oxidation Reactions

The review presents recent examples of heterogenic catalysts based on porphyrins and phthalocyanines loaded on mesoporous materials, such as MCM-41, SBA-15, MCM-48, SBA-16 or Al-MCM-41. Heterogenic approach to catalysis eases recovery, reuse and prevent macrocycle aggregation. In this application, mesoporous silica is a promising candidate for anchoring macrocycle and obtaining a new catalyst. Introduction of porphyrin or phthalocyanine into the mesoporous material may be performed through adsorption of the macrocycle, or by its in situ formation—by reaction of substrates introduced to the pores of the catalytic material. Catalytic reactions studied are oxidation processes, focused on alkane, alkene or arene as substrates. The products obtained are usually epoxides, alcohols, ketones, aldehydes or acids. The greatest interest lies in oxidation of cyclohexane and cyclohexene, as a source of adypic acid and derivatives. Some of the reactions may be viewed as biomimetic processes, resembling processes that occur in vivo and are catalyzed by cytochrome P450 enzyme family.

Reaction mechanism of the green synthesis of glutaric acid

In this study, the reaction mechanism underlying the green synthesis of glutaric acid was studied via joint test technology. Density functional theory calculations were used to verify the mechanism. Quantitative analysis of glutaric acid via infrared spectroscopy and HPLC was established. The linear correlation between the two methods was good, from 0.01 to 0.25 g mL^-1. The analysis results of the two methods were consistent as the reaction progressed.