BORON CATALYSIS. Metal-free catalytic C-H bond activation and borylation of heteroarenes

Synthetic progress of organic thermally activated delayed fluorescence emitters via C-H activation and functionalization

Thermally activated delayed fluorescence (TADF) emitters have become increasingly prominent due to their promising applications across various fields, prompting a continuous demand for developing reliable synthetic methods to access them. This review aims to highlight the progress made in the last decade in synthesizing organic TADF compounds through C-H bond activation and functionalization. The review begins with a brief introduction to the basic features and design principles of TADF emitters. It then provides an overview of the advantages and concise development of C-H bond transformations in constructing TADF emitters. Subsequently, it summarizes both transition-metal-catalyzed and non-transition-metal-promoted C-H bond transformations used for the synthesis of TADF emitters. Finally, the review gives an outlook on further challenges and potential directions in this field.

On the mechanism of sp2 C-H borylation using ortho-N-substituted pyridinium cations

ortho-N-Substituted pyridinium cations with the weakly coordinating anion [B(C6F5)4]- have been studied and crucial structural features in the sp2 C-H borylation catalysis of 3-methylthiophene have been identified. The electron-deficiency of the aromatic core of the cation is essential for activity together with accessible protons. The spectroscopic yield of the borylation of 3-methylthiophene with catecholborane (CatBH) was optimized up to 86% and the method was further applied to other substrates such as N-alkylbenzenes. A mechanistic DFT study revealed the rate-limiting step in the catalysis to be the liberation of molecular H2 (ΔG‡ = 27.5 kcal mol-1), whereas the overall reaction was found to be exergonic by 5.1 kcal mol-1.

Engineering Frustrated Lewis Pair Active Sites in Porous Organic Scaffolds for Catalytic CO2 Hydrogenation

Frustrated Lewis pairs (FLPs), featuring reactive combinations of Lewis acids and Lewis bases, have been utilized for myriad metal-free homogeneous catalytic processes. Immobilizing the active Lewis sites to a solid support, especially to porous scaffolds, has shown great potential to ameliorate FLP catalysis by circumventing some of its inherent drawbacks, such as poor product separation and catalyst recyclability. Nevertheless, designing immobilized Lewis pair active sites (LPASs) is challenging due to the requirement of placing the donor and acceptor centers in appropriate geometric arrangements while maintaining the necessary chemical environment to perform catalysis, and clear design rules have not yet been established. In this work, we formulate simple guidelines to build highly active LPASs for direct catalytic hydrogenation of CO2 through a large-scale screening of a diverse library of 25,000 immobilized FLPs. The library is built by introducing boron-containing acidic sites in the vicinity of the existing basic nitrogen sites of the organic linkers of metal-organic frameworks collected in a "top-down" fashion from the CoRE MOF 2019 database. The chemical and geometrical appropriateness of these LPASs for CO2 hydrogenation is determined by evaluating a series of simple descriptors representing the intrinsic strength (acidity and basicity) of the components and their spatial arrangement in the active sites. Analysis of the leading candidates enables the formulation of pragmatic and experimentally relevant design principles which constitute the starting point for further exploration of FLP-based catalysts for the reduction of CO2.

Magnetically Recyclable Borane Lewis Acid Catalyst for Hydrosilylation of Imines and Reductive Amination of Carbonyls

Fluorinated arylborane-based Lewis acid catalysts have shown remarkable activity and serve as ideal examples of transition metal-free catalysts for diverse organic transformations. However, their homogeneous nature poses challenges in terms of recyclability and separation from reaction mixtures. This work presents an efficient technique for the heterogenization of boron Lewis acid catalysts by anchoring Piers' borane to allyl-functionalized iron oxide. This catalyst demonstrates excellent activity in the hydrosilylation of imines and the reductive amination of carbonyls using various silanes as reducing agents under mild reaction conditions. The catalyst exhibits broad tolerance towards a wide range of functional substrates. Furthermore, it exhibits good recyclability and can be easily separated from the products using an external magnetic field. This work represents a significant advance in the development of sustainable heterogenous metal-free catalysts for organic transformations.

Late-Stage Diversification of Phosphines by C-H Activation: A Robust Strategy for Ligand Design and Preparation

ConspectusThe advent of the twenty-first century marked a golden era in the realm of synthetic chemistry, exemplified by groundbreaking advancements in the field of C-H activation, which is a concept that quickly transitioned from mere academic fascination to an essential element within the synthetic chemist's toolkit. This methodological breakthrough has given rise to a wealth of opportunities spanning a wide range of chemical disciplines. It has facilitated the late-stage diversification of elaborate organic frameworks, encompassing the spectrum from simple methane to complex polymers, thus refining the lead optimization process and easing the production of diverse molecular analogues. Among these strides forward, the development of phosphorus(III)-directed C-H activation stands out as an increasingly significant and inventive approach for the design and synthesis of ligands, substantially redefining the contours of synthetic methodology.Phosphines, renowned for their roles as ligands and organocatalysts, have become fundamentally important in modern organic chemistry. Their efficiency as ligands is significantly affected by coordination with transition metals, which is essential for their involvement in catalytic processes, influencing both the catalytic activity and the selectivity. Historically, the fabrication of phosphines predominantly relied on synthesis employing complex, multistep procedures. Addressing this limitation, our research has delved into ligand design and synthesis through innovative catalytic P(III)-directed C-H activation strategies. In this Account, we have explored a spectrum of procedures, including direct arylation using metal catalysis, and ventured further into domains such as C-H alkylation, alkenylation, aminocarbonylation, alkynylation, borylation, and silylation. These advances have enriched the field by providing efficient methods for the late-stage diversification of biaryl-type monophosphines as well as enabled the C-H activation of triphenylphosphine and its derivatives. Moreover, we have successfully constructed libraries of diverse axially chiral binaphthyl phosphine ligands, showcasing their potency in asymmetric catalysis. Through this Account, we aim to illuminate the exciting possibilities presented by P(III)-directed C-H activation in propelling the boundaries of organic synthesis. By highlighting our pioneering work, we hope to inspire further developments in this promising field of chemistry.

Tunable molecular editing of indoles with fluoroalkyl carbenes

Building molecular complexity from simple feedstocks through precise peripheral and skeletal modifications is central to modern organic synthesis. Nevertheless, a controllable strategy through which both the core skeleton and the periphery of an aromatic heterocycle can be modified with a common substrate remains elusive, despite its potential to maximize structural diversity and applications. Here we report a carbene-initiated chemodivergent molecular editing of indoles that allows both skeletal and peripheral editing by trapping an electrophilic fluoroalkyl carbene generated in situ from fluoroalkyl N-triftosylhydrazones. A variety of fluorine-containing N-heterocyclic scaffolds have been efficiently achieved through tunable chemoselective editing reactions at the skeleton or periphery of indoles, including one-carbon insertion, C3 gem-difluoroolefination, tandem cyclopropanation and N1 gem-difluoroolefination, and cyclopropanation. The power of this chemodivergent molecular editing strategy has been highlighted through the modification of the skeleton or periphery of natural products in a controllable and chemoselective manner. The reaction mechanism and origins of the chemo- and regioselectivity have been probed by both experimental and theoretical methods.

Stabilization of Diborynes versus Destabilization of Diborenes by Coordination of Lewis Bases: Unravelling the Dichotomy

We have quantum chemically investigated the boron-boron bonds in B2 , diborynes B2 L2 , and diborenes B2 H2 L2 (L=none, OH2 , NH3 ) using dispersion-corrected relativistic density functional theory at ZORA-BLYP-D3(BJ)/TZ2P. B2 has effectively a single B-B bond provided by two half π bonds, whereas B2 H2 has effectively a double B=B bond provided by two half π bonds and one σ 2p-2p bond. This different electronic structure causes B2 and B2 H2 to react differently to the addition of ligands. Thus, in B2 L2 , electron-donating ligands shorten and strengthen the boron-boron bond whereas, in B2 H2 L2 , they lengthen and weaken the boron-boron bond. The aforementioned variations in boron-boron bond length and strength become more pronounced as the Lewis basicity of the ligands L increases.

Lanthanide/B(C6F5)3-Promoted Hydroboration Reduction of Indoles and Quinolines with Pinacolborane

We have developed a lanthanide/B(C6F5)3-promoted hydroboration reduction of indoles and quinolines with pinacolborane (HBpin). This reaction provides streamlined access to a range of nitrogen-containing compounds in moderate to excellent yields. Large-scale synthesis and further transformations to bioactive compounds indicate that the method has potential practical applications. Preliminary mechanistic studies suggest that amine additives promote the formation of indole-borane intermediates, and the lanthanide/B(C6F5)3-promoted hydroboration reduction proceeds via hydroboration of indole-borane intermediates with HBpin and in situ-formed BH3 species, followed by the protodeborylation process.

Systematic Assessment of the Catalytic Reactivity of Frustrated Lewis Pairs in C-H Bond Activation

Unreactive C-H bond activation is a new horizon for frustrated Lewis pair (FLP) chemistry. This study provides a systematic assessment of the catalytic reactivity of recently reported intra-molecular FLPs on the activation of typical inert C-H bonds, including 1-methylpyrrole, methane, benzyl, propylene, and benzene, in terms of density functional theory (DFT) calculations. The reactivity of FLPs is evaluated according to the calculated reaction thermodynamic and energy barriers of C-H bond activation processes in the framework of concerted C-H activation mechanisms. As for 1-methylpyrrole, 14 types of N-B-based and 15 types of P-B-based FLPs are proposed to be active. Although none of the evaluated FLPs are able to catalyze the C-H activation of methane, benzyl, or propylene, four types of N-B-based FLPs are suggested to be capable of catalyzing the activation of benzene. Moreover, the influence of the strength of Lewis acid (LA) and Lewis base (LB), and the differences between the influences of LA and LB on the catalytic reactivity of FLPs, are also discussed briefly. This systematic assessment of the catalytic activity of FLPs should provide valuable guidelines to aid the development of efficient FLP-based metal-free catalysts for C-H bond activation.

Metal-free sp2 -C7-H Borylation of Tryptophan Containing Peptides and Late-stage Modification

The discovery of milder and robust strategies to enable the introduction of organoboronates in peptides remains conspicuously underdeveloped. Herein, we demonstrate an efficient method for the site-selective sp2 -C7-H borylation of tryptophan under metal-free condition using BBr3 directed by pivaloyl group. The versatility of this approach is that gram scale synthesis and C7-borylated N-Phth-Trp(N-Piv)(C7-BPin)-OMe was modified into various C7-substituted derivatives. Moreover, the strategy enables for the peptide elongation and late-stage borylation of peptides, natural product Brevianamide F and drug Oglufanide.

Homolytic C-H Bond Activation by Phosphine-Quinone-Based Radical Ion Pairs

Herein, we present the formation of transient radical ion pairs (RIPs) by single-electron transfer (SET) in phosphine-quinone systems and explore their potential for the activation of C-H bonds. PMes3 (Mes=2,4,6-Me3 C6 H2 ) reacts with DDQ (2,3-dichloro-5,6-dicyano-1,4-benzoquinone) with formation of the P-O bonded zwitterionic adduct Mes3 P-DDQ (1), while the reaction with the sterically more crowded PTip3 (Tip=2,4,6-iPr3 C6 H2 ) afforded C-H bond activation product Tip2 P(H)(2-[CMe2 (DDQ)]-4,6-iPr2 -C6 H2 ) (2). UV/Vis and EPR spectroscopic studies showed that the latter reaction proceeds via initial SET, forming RIP [PTip3 ]⋅+ [DDQ]⋅- , and subsequent homolytic C-H bond activation, which was supported by DFT calculations. The isolation of analogous products, Tip2 P(H)(2-[CMe2 {TCQ-B(C6 F5 )3 }]-4,6-iPr2 -C6 H2 ) (4, TCQ=tetrachloro-1,4-benzoquinone) and Tip2 P(H)(2-[CMe2 {oQtBu -B(C6 F5 )3 }]-4,6-iPr2 -C6 H2 ) (8, oQtBu =3,5-di-tert-butyl-1,2-benzoquinone), from reactions of PTip3 with Lewis-acid activated quinones, TCQ-B(C6 F5 )3 and oQtBu -B(C6 F5 )3 , respectively, further supports the proposed radical mechanism. As such, this study presents key mechanistic insights into the homolytic C-H bond activation by the synergistic action of radical ion pairs.

Carbon-Carbon Bond Cleavage for Late-Stage Functionalization

Late-stage functionalization (LSF) introduces functional group or structural modification at the final stage of the synthesis of natural products, drugs, and complex compounds. It is anticipated that late-stage functionalization would improve drug discovery's effectiveness and efficiency and hasten the creation of various chemical libraries. Consequently, late-stage functionalization of natural products is a productive technique to produce natural product derivatives, which significantly impacts chemical biology and drug development. Carbon-carbon bonds make up the fundamental framework of organic molecules. Compared with the carbon-carbon bond construction, the carbon-carbon bond activation can directly enable molecular editing (deletion, insertion, or modification of atoms or groups of atoms) and provide a more efficient and accurate synthetic strategy. However, the efficient and selective activation of unstrained carbon-carbon bonds is still one of the most challenging projects in organic synthesis. This review encompasses the strategies employed in recent years for carbon-carbon bond cleavage by explicitly focusing on their applicability in late-stage functionalization. This review expands the current discourse on carbon-carbon bond cleavage in late-stage functionalization reactions by providing a comprehensive overview of the selective cleavage of various types of carbon-carbon bonds. This includes C-C(sp), C-C(sp2), and C-C(sp3) single bonds; carbon-carbon double bonds; and carbon-carbon triple bonds, with a focus on catalysis by transition metals or organocatalysts. Additionally, specific topics, such as ring-opening processes involving carbon-carbon bond cleavage in three-, four-, five-, and six-membered rings, are discussed, and exemplar applications of these techniques are showcased in the context of complex bioactive molecules or drug discovery. This review aims to shed light on recent advancements in the field and propose potential avenues for future research in the realm of late-stage carbon-carbon bond functionalization.

π-Electron Fluctuation-Induced P+ /C- Ambiphilic Interaction for Intramolecular CAr -H Bond Activation

Herein, we describe how computational mechanistic understanding has led directly to the discovery of new 2H-phosphindole for C-CAr bond activation and dearomatization reaction. We uncover an unexpected intramolecular C-H bond activation with a 2H-phosphindole derivative. This new intriguing experimental observation and further theoretical studies led to an extension of the reaction mechanism with 2H-phosphindole. Through DFT calculations, we confirm that within a five-membered ring, the polarizable PC3 unit orchestrates the formation of an electrophilic phosphorus atom (P+ ) and a nucleophilic carbon atom (C- ). This kinetically accessible ambiphilic phosphorus/carbon couple is spatially separated by geometric constraints, and their reactivity is modulated through structural resonance.

Reversible Oxidative Addition of Nonactivated C-H Bonds to Structurally Constrained Phosphenium Ions

A series of structurally constrained phosphenium ions based on pyridinylmethylamidophenolate scaffolds are shown to undergo P(III)/P(V) oxidative addition with C-H bonds of alkynes, alkenes, and arenes. Nonactivated substrates such as benzene, toluene, and deactivated chlorobenzene are phosphorylated in quantitative yields. Computational and spectroscopic studies suggest a low-barrier isomerization from a bent to a T-shaped isomer that initiates a phosphorus-ligand-cooperative pathway and subsequent ring-chain tautomerism. Remarkably, C-H bond activations occur reversibly, allowing for reductive elimination back to P(III) at elevated temperatures or the exchange with other substrates.

Borylation directed borylation of N-alkyl anilines using iodine activated pyrazaboles

Doubly electrophilic pyrazabole derivatives (pyrazabole = [H2B(μ-C3N2H3)]2) combined with one equiv. of base effect the ortho-borylation of N-alkyl anilines. Initial studies found that the bis(trifluoromethane)sulfonimide ([NTf2]-) pyrazabole derivative, [H(NTf2)B(μ-C3N2H3)]2, is highly effective for ortho-borylation, with this process proceeding through N-H borylation and then ortho C-H borylation. The activation of pyrazabole by I2 was developed as a cheaper and simpler alternative to using HNTf2 as the activator. The addition of I2 forms mono or ditopic pyrazabole electrophiles dependent on stoichiometry. The ditopic electrophile [H(I)B(μ-C3N2H3)]2 was also effective for the ortho-borylation of N-alkyl-anilines, with the primary C-H borylation products readily transformed into pinacol boronate esters (BPin) derivatives. Comparison of borylation reactions using the di-NTf2-and the diiodo-pyrazabole congeners revealed that more forcing conditions are required with the latter. Furthermore, the presence of iodide leads to competitive formation of side products, including [HB(μ-C3N2H3)3BH]+, which are not active for C-H borylation. Using [H(I)B(μ-C3N2H3)]2 and 0.2 equiv. of [Et3NH][NTf2] combines the higher yields of the NTf2 system with the ease of handling and lower cost of the iodide system generating an attractive process applicable to a range of N-alkyl-anilines. This methodology represents a metal free and transiently directed C-H borylation approach to form N-alkyl-2-BPin-aniline derivatives.

Recent advances in metal directed C-H amidation/amination using sulfonyl azides and phosphoryl azides

Transition metal-catalyzed C-N bond formation reactions have gained popularity as a method for selectively transforming common C-H bonds into N-functionalized molecules. This approach is particularly useful for synthesizing aminated molecules, which require aminating reagents and amidated building blocks. Over the past two decades, significant advancements have been achieved in transition-metal-catalyzed C-H functionalization, with organic azides emerging as promising amino sources and internal oxidants. This review focuses on recent developments in utilizing sulfonyl and phosphoryl azides as building blocks for directed intra- and intermolecular C-H functionalization reactions. Specifically, it discusses methods for synthesizing sulfonamidates and phosphoramidates using sulfonyl and phosphoryl azides, respectively. The article highlights the potential of C-H functionalization reactions with organic azides for efficiently and sustainably synthesizing N-functionalized molecules, providing valuable insights into the latest advancements in this field.

Metal-Free Stereoconvergent C-H Borylation of Enamides

Enamides, functional derivatives of enamines, play a significant role as synthetic targets. However, the stereoselective synthesis of these molecules has posed a longstanding challenge in organic chemistry, particularly for acyclic enamides that are less thermodynamically stable. In this study, we present a general strategy for constructing β-borylenamides by C-H borylation, which provides a versatile platform for generating the stereodefined enamides. Our approach involves the utilization of metalloid borenium cation, generated through the reaction of BBr3 and enamides in the presence of two different additives, avoiding any exogenous catalyst. Importantly, the stereoconvergent nature of this methodology allows for the use of starting materials with mixed E/Z configurations, thus highlighting the unique advantage of this chemistry. Mechanistic investigations have shed light on the pivotal roles played by the two additives, the reactive boron species, and the phenomenon of stereoconvergence.

Reversible C-H bond silylation with a neutral silicon Lewis acid

The silicon-carbon bond is a valuable linchpin for synthetic transformations. However, installing Si-C functionalities requires metalated C-nucleophiles, activated silicon reagents (silylium ions, silyl radicals, and silyl anions), or transition metal catalysis, and it occurs irreversibly. In contrast, spontaneous C-H silylations with neutral silanes leading to anionic silicates, and their reversible deconstruction, are elusive. Herein, the CH-bond silylation of heterocycles or a terminal alkyne is achieved by reaction with bis(perfluoro(N-phenyl-ortho-amidophenolato))silane and 1,2,2,6,6-pentamethylpiperidine. Computational and experimental insights reveal a frustrated Lewis pair (FLP) mechanism. Adding a silaphilic donor to the ammonium silicate products induces the reformation of the C-H bond, thus complementing previously known irreversible C-H bond silylation protocols. Interestingly, the FLP "activated" N-methylpyrrole exhibits "deactivated" features against electrophiles, while a catalytic functionalization is found to be effective only in the absence of a base.

Metal-free C-H Borylation and Hydroboration of Indoles

The C-H borylation and hydroboration reactions have emerged as promising synthetic tools to construct organoboron compounds. Organoboron compounds of N-heterocycles, particularly indole derivatives, have found widespread application in a variety of fields. As a result, considerable advancement in the area of C-H borylation and hydroboration reactions of indoles was observed in the last few decades. Among the various synthetic methods applied, the metal-free approach has received special attention. This mini-review discusses the recent progress in the area of C-H borylation and hydroboration reactions of indoles under metal-free conditions, their scope, and brief mechanistic studies.

Atroposelective Ir-Catalyzed C-H Borylation of Phthalazine Heterobiaryls

The atroposelective iridium-catalyzed borylation of menthyloxy-substituted phthalazine heterobiaryls with diborons is reported. Utilizing [Ir(OMe)(COD)]2/2-aminopyridine as a rarely used efficient catalyst system, the heterobiaryls were selectively borylated in the 2-position of the carbocycle, exclusively yielding only one of the atropisomers, depending on the substitution of the phthalazine with (+)-menthyl or (-)-menthyl moieties. Exemplary further functionalization of a borylated atropisomer demonstrated that nickel-catalyzed Suzuki-Miyaura cross-coupling with an aryl halide was able to provide stereoretention to a certain degree (up to 75% de).

Metal-Free Directed Site-Selective Csp3 -H Borylation of Saturated Cyclic Amines

The borylation of Csp3 -H bonds is a challenging transformation that is typically restricted to transition metal catalysis. Herein, we report the site-selective metal-free Csp3 -H borylation of saturated cyclic amines. It is possible to selectively borylate piperidine derivatives at the α or β positions according to the reaction conditions. The mechanism was supported by NMR spectroscopy, calorimetry experiments and density functional theory (DFT) computations. It suggests that the piperidine is dehydrogenated by complexation with BBr3 to produce an enamine intermediate, which is in turn borylated at either the α or β position according to the reaction conditions.

Si-B Functional Group Exchange Reaction Enabled by a Catalytic Amount of BH3: Scope, Mechanism, and Application

Functional group exchanges based on single-bond transformation are rare and challenging. In this regard, functional group exchange reactions of hydrosilanes proved to be more problematic. This is because this exchange requires the cleavage of the C-Si bond, while the Si-H bond is relatively easily activated for hydrosilanes. Herein, we report the first Si-B functional group exchange reactions of hydrosilanes with hydroboranes simply enabled by BH₃ as a catalyst. Our methodology works for various aryl and alkyl hydrosilanes and different hydroboranes with the tolerance of general functional groups (up to 115 examples). Control experiments and density functional theory (DFT) studies reveal a distinct reaction pathway that involves consecutive C-Si/B-H and C-B/B-H σ-bond metathesis. Further investigations of using more readily available chlorosilanes, siloxane, fluorosilane, and silylborane for Si-B functional group exchanges, Ge-B functional group exchanges, and depolymerizative Si-B exchanges of polysilanes are also demonstrated. Moreover, the regeneration of MeSiH₃ from polymethylhydrosiloxane (PMHS) is achieved. Notably, the formal hydrosilylation of a wide range of alkenes with SiH₄ and MeSiH₃ to selectively produce (chiral)trihydrosilanes and (methyl)dihydrosilanes is realized using inexpensive and readily available PhSiH₃ and PhSiH₂Me as gaseous SiH₄ and MeSiH₃ surrogates.

Internal B ← O Bond Facilitated Photo/Thermal Isomerization of Tetra-Coordinated Boranes

A new series of O∧C-chelate tetra-coordinated boranes with naphtha-aldehyde as the chelate backbone have been synthesized. Their photophysical and photochemical properties have been examined, which show that all of the compounds can undergo both photo and thermal transformations, generating aryl-migrated [1,2]oxaborinine derivatives as the major products. 1,3-Sigmatropic shifts and an intramolecular nucleophilic addition mechanism are proposed for the photochemical and thermal conversion pathways, respectively.

Green One-Pot Syntheses of 2-Sulfoximidoyl-3,6-dibromo Indoles Using N-Br Sulfoximines as Both Brominating and Sulfoximinating Reagents

A green one-pot 2,3,6-trifunctionalization of N-alkyl/aryl indoles was achieved by adding three equivalents of N-Br sulfoximine to the indole solution. A variety of 2-sulfoximidoyl-3,6-dibromo indoles were prepared with 38-94% yields using N-Br sulfoximines as both brominating and sulfoximinating reagents. Based on the results of controlled experiments, we propose that a radical substitution involving 3,6-dibromination and 2-sulfoximination occurs in the reaction process. This is first time that 2,3,6-trifunctionalization of indole in one pot has been achieved.

Probing the Impact of Solvent on the Strength of Lewis Acids via Fluorescent Lewis Adducts

Various methods have been developed to measure the strength of a Lewis acid. A major challenge for these measurements lies in the complexity that arises from variable solvent interactions and perturbations of Lewis acids as their reaction environment changes. Herein, we investigate the impact of solvent effects on Lewis acids for the first time as measured by the fluorescent Lewis adduct (FLA) method. The binding of a Lewis acid in various solvents reveals a measurable dichotomy between both polarity and donor ability of the solvent. While not strictly separable, we observe that the influence of solvent polarity on Lewis acid unit (LAU) values is distinctly opposite to the influence of donor ability. This dichotomy was confirmed by titration data, illustrating that solvation effects can be appropriately and precisely gauged by the FLA method.

Enroute sustainability: metal free C-H bond functionalisation

The term "C-H functionalisation" incorporates C-H activation followed by its transformation. In a single line, this can be defined as the conversion of carbon-hydrogen bonds into carbon-carbon or carbon-heteroatom bonds. The catalytic functionalisation of C-H bonds using transition metals has emerged as an atom-economical technique to engender new bonds without activated precursors which can be considered as a major drawback while attempting large-scale synthesis. Replacing the transition-metal-catalysed approach with a metal-free strategy significantly offers an alternative route that is not only inexpensive but also environmentally benign to functionalize C-H bonds. Recently metal free synthetic approaches have been flourishing to functionalize C-H bonds, motivated by the search for greener, cost-effective, and non-toxic catalysts. In this review, we will highlight the comprehensive and up-to-date discussion on recent examples of ground-breaking research on green and sustainable metal-free C-H bond functionalisation.

Palladium-Catalyzed Cyclizative Borylation of Allenyl Ketones through Carbene Boryl Migratory Insertion: Access to Densely Substituted Furyl Boronates

Herein the palladium-catalyzed cyclizative borylation of allenyl ketones with diboron compounds is reported which involves the carbene boryl migratory insertion as the key step. This reaction features mild conditions, good functional group tolerance and broad substrate scope. Thus, it represents an efficient methodology for the assembly of diverse tri-substituted furyl boronates. In addition, a series of transformations of the resultant multi-substituted furyl boronates were conducted to provide various densely substituted furan derivatives in good yields, further illustrating the potential synthetic utility of this methodology.

Transition Metal-Free Aromatic C-H, C-N, C-S and C-O Borylation

Aromatic organoboron compounds are highly valuable building blocks in organic chemistry. They were mainly synthesized through aromatic C-H and C-Het borylation, in which transition metal-catalysis dominate. In the past decade, with increasing attention to sustainable chemistry, numerous transition metal-free C-H and C-Het borylation transformations have been developed and emerged as efficient methods towards the synthesis of aromatic organoboron compounds. This account mainly focuses on recent advances in transition metal-free aromatic C-H, C-N, C-S, and C-O borylation transformations and provides insights to where further developments are required.

Organocalcium Hydride-Catalyzed Intramolecular C(sp3)-H Annulation of Functionalized 2,6-Lutidines

This work reports an intramolecular C(sp³)-H annulation of functionalized 2,6-lutidines catalyzed by an organocalcium hydride [{(^DIPPnacnac)CaH(thf)}₂] (^DIPPnacnac = CH{(CMe)(2,6-ⁱPr₂-C₆H₃N)}₂). This reaction constitutes a streamlined approach for producing a new family of tetrahydro-1,5-naphthyridines and hexahydropyrido[3,2-b]azocines derivatives in good to excellent yields with high atom efficiency and broad substrates scope. A calcium alkyl complex was isolated from the stoichiometric reaction between calcium hydride and the substrate through deprotonation, which was structurally characterized and confirmed as the catalytic intermediate.

Understanding and Expanding Zinc Cation/Amine Frustrated Lewis Pair Catalyzed C-H Borylation

[(NacNac)Zn(DMT)][B(C₆F₅)₄], 1, (NacNac = {(2,6- ⁱ Pr₂H₃C₆)N(CH₃)C}₂CH), DMT = N,N-dimethyl-4-toluidine), was synthesized via two routes starting from either (NacNac)ZnEt or (NacNac)ZnH. Complex 1 is an effective (pre)catalyst for the C-H borylation of (hetero)arenes using catecholborane (CatBH) with H₂ the only byproduct. The scope included weakly activated substrates such as 2-bromothiophene and benzothiophene. Computational studies elucidated a plausible reaction mechanism that has an overall free energy span of 22.4 kcal/mol (for N-methylindole borylation), consistent with experimental observations. The calculated mechanism starting from 1 proceeds via the displacement of DMT by CatBH to form [(NacNac)Zn(CatBH)]⁺, D, in which CatBH binds via an oxygen to zinc which makes the boron center much more electrophilic based on the energy of the CatB-based LUMO. Combinations of D and DMT act as a frustrated Lewis pair (FLP) to effect C-H borylation in a stepwise process via an arenium cation that is deprotonated by DMT. Subsequent B-H/[H-DMT]⁺ dehydrocoupling and displacement from the coordination sphere of zinc of CatBAr by CatBH closes the cycle. The calculations also revealed a possible catalyst decomposition pathway involving hydride transfer from boron to zinc to form (NacNac)ZnH which reacts with CatBH to ultimately form Zn(0). In addition, the key rate-limiting transition states all involve the base, thus fine-tuning of the steric and electronic parameters of the base enabled a further minor enhancement in the C-H borylation activity of the system. Outlining the mechanism for all steps of this FLP-mediated process will facilitate the development of other main group FLP catalysts for C-H borylation and other transformations.

Metal-Free Intermolecular C-H Borylation of N-Heterocycles at B-B Multiple Bonds

Carbene-stabilized diborynes of the form LBBL (L=N-heterocyclic carbene (NHC) or cyclic alkyl(amino)carbene (CAAC)) induce rapid, high yielding, intermolecular ortho-C-H borylation at N-heterocycles at room temperature. A simple pyridyldiborene is formed when an NHC-stabilized diboryne is combined with pyridine, while a CAAC-stabilized diboryne leads to activation of two pyridine molecules to give a tricyclic alkylideneborane, which can be forced to undergo a further H-shift resulting in a zwitterionic, doubly benzo-fused 1,3,2,5-diazadiborinine by heating. Use of the extended N-heteroaromatic quinoline leads to a borylmethyleneborane under mild conditions via an unprecedented boron-carbon exchange process.

Group 13 exchange and transborylation in catalysis

Catalysis is dominated by the use of rare and potentially toxic transition metals. The main group offers a potentially sustainable alternative for catalysis, due to the generally higher abundance and lower toxicity of these elements. Group 13 elements have a rich catalogue of stoichiometric addition reactions to unsaturated bonds but cannot undergo the redox chemistry which underpins transition-metal catalysis. Group 13 exchange reactions transfer one or more groups from one group 13 element to another, through σ-bond metathesis; where boron is both of the group 13 elements, this is termed transborylation. These redox-neutral processes are increasingly being used to render traditionally stoichiometric group 13-mediated processes catalytic and develop new catalytic processes, examples of which are the focus of this review.

Borenium-Ion-Catalyzed C-H Borylation of Arenes

Non-metal-catalyzed C-H borylation of arenes represents a sustainable and environment-friendly approach for the functionalization of arenes. Despite its promise as an alternative to traditional transition-metal systems, its substrate scope is generally limited to electron-rich arenes, thus hindering its application in organic synthesis. Herein, we report the development of a borenium-ion catalyst which can borylate unactivated arenes under ambient conditions with 4-chlorocatecholborane (HBcat^Cl) as borylation reagent. This metal-free catalytic system is suitable for the borylation of C-H bonds in sterically encumbered positions, which has been a challenging task for transition-metal systems. Additionally, this catalytic system allows para-selective one-pot borylation of phenols, which has not been achieved by using transition-metal systems. Our mechanistic investigations and computational studies support a synergistic activation of the H-Bcat^Cl bond by the arene substrate and the borenium-ion catalyst. This generates a Wheland intermediate and a neutral hydroborane species and is followed by deprotonation of the Wheland intermediate with the hydroborane species. The latter step of C-H bond cleavage is likely the rate-limiting step.

Dynamic B/N Lewis Pairs: Insights into the Structural Variations and Photochromism via Light-Induced Fluorescence to Phosphorescence Switching

Ultralong afterglow emissions due to room-temperature phosphorescence (RTP) are of paramount importance in the advancement of smart sensors, bioimaging and light-emitting devices. We herein present an efficient approach to achieve rarely accessible phosphorescence of heavy atom-free organoboranes via photochemical switching of sterically tunable fluorescent Lewis pairs (LPs). LPs are widely applied in and well-known for their outstanding performance in catalysis and supramolecular soft materials but have not thus far been exploited to develop photo-responsive RTP materials. The intramolecular LP M1BNM not only shows a dynamic response to thermal treatment due to reversible N→B coordination but crystals of M1BNM also undergo rapid photochromic switching. As a result, unusual emission switching from short-lived fluorescence to long-lived phosphorescence (rad-M1BNM, τ_RTP =232 ms) is observed. The reported discoveries in the field of Lewis pairs chemistry offer important insights into their structural dynamics, while also pointing to new opportunities for photoactive materials with implications for fast responsive detectors.

Transborylation-Enabled Boron Catalysis

This review highlights transborylation (controlled boron-boron exchange) and its applications as a turnover strategy in boron-catalysed methodologies. Catalytic applications of B–C, B–O, B–N, B–F, B–S, and B–Se transborylations are discussed in the context of transborylation-enabled catalysis, across a wide range of organic transformations including hydroboration, C–C bond formation, C–H borylation, chemoselective reduction, and asymmetric reduction.

1 Introduction

2 B–C Transborylation

3 B–O Transborylation

4 B–N Transborylation

5 B–F Transborylation

6 B–S Transborylation

7 Conclusion

Frustrated Lewis Pair Chelation and Reactivity of Complexed Parent Iminoborane and Aminoborane

An intramolecular phosphine-borane frustrated Lewis pair (FLP) chelate, ⁱPr₂P(C₆H₄)BCy₂ or PB (Cy = cyclohexyl), was used to coordinate aminoborane (H₂BNH₂) and iminoborane (HBNH) units via donor-acceptor stabilization. Attempts to induce dehydrogenation from these B-N adducts with known metal catalysts (or pre-catalysts) have been unsuccessful thus far, and related observations were noted with an H₂BNH₂ complex supported by a modified FLP chelate bearing a geometrically constrained bicyclic 9-borabicyclo(3.3.1)nonane (BBN) unit. Treatment of the iminoborane adduct [PB{HBNH}] with a chlorinating agent led to ligand activation via B-C bond cleavage instead of the expected H/Cl exchange at boron to give [PB{ClBNH}]. Nucleophilic attack at the boron center in [PB{HBNH}] was observed upon addition of BnK (Bn = benzyl), yielding the amidoborate complex [PB{H(Bn)BNH}{K(THF)₂}].

Diastereoselective, Catalytic Access to Cross-Aldol Products Directly from Esters and Lactones

High oxidation-state carbonyl coupling partners including esters and lactones were reacted with enones to give aldol-type products directly using two-fold organoborane catalysis. This new retrosynthetic disconnection to aldol-type products is compatible with enolisable coupling partners, without self-condensation, and couples the high reactivity of secondary dialkylboranes with the stability of pinacolboronic esters. Excellent chemoselectivity, substrate scope (including those containing reducible functionalities and free alcohols) and diastereocontrol were achieved to access both the syn- and anti-aldol-type products. Mechanistic studies confirmed the two-fold catalytic role of the single secondary borane catalyst for boron enolate formation and formation of an aldehyde surrogate from the ester or lactone coupling partner.

Reactions of Diethylazo-Dicarboxylate with Frustrated Lewis Pairs

Reactions of PAr₃ /B(C₆ F₅ )₃ (Ar=o-Tol, Mes, Ph) FLPs with diethyl azodicarboxylate (DEAD) afford the corresponding FLP addition products 1-3 in which P-N and B-O linkages are formed. In contrast, the reaction of BPh₃ , PPh₃ and DEAD gave product 4 where P-N and N-B linkages were confirmed. In all cases, other binding modes were computed to be both higher in energy and readily distinguishable by ³¹ P and ¹¹ B NMR parameters. These data illustrate the influence of steric demands and electronic structures on the nature of the products of FLP reactions with DEAD.

Adsorption of Polycyclic Aromatic Hydrocarbons and C60 onto Forsterite: C-H Bond Activation by the Schottky Vacancy

Understanding how to catalytically break the C-H bond of aromatic molecules, such as polycyclic aromatic hydrocarbons (PAHs), is currently a big challenge and a subject of study in catalysis, astrochemistry, and planetary science. In the latter, the study of the breakdown reaction of PAHs on mineral surfaces is important to understand if PAHs are linked to prebiotic molecules in regions of star and planet formation. In this work, we employed a periodic density functional theory along with Grimme's D4 (DFT-D4) approach for studying the adsorption of a sample of PAHs (naphthalene, anthracene, fluoranthene, pyrene, coronene, and benzocoronene) and fullerene on the [010] forsterite surface and its defective surfaces (Fe-doped and Ni-doped surfaces and a MgO-Schottky vacancy) for their implications in catalysis and astrochemistry. On the basis of structural and binding energy analysis, large PAHs and fullerene present stronger adsorption on the pristine, Fe-doped, and Ni-doped forsterite surfaces than small PAHs. On a MgO-Schottky vacancy, parallel adsorption of the PAH leads to the chemisorption process (C-Si and/or C-O bonds), whereas perpendicular orientation of the PAH leads to the catalytic breaking of the aromatic C-H bond via a barrierless reaction. Spin density and charge analysis show that C-H dissociation is promoted by electron donation from the vacancy to the PAH. As a result of the undercoordinated Si and O atoms, the vacancy acts as a Frustrated Lewis Pair (FLP) catalyst. Therefore, a MgO-Schottky vacancy [010] forsterite surface proved to have potential catalytic activity for the activation of C-H bond in aromatic molecules.

Lewis Acid Assisted Brønsted Acid Catalysed Decarbonylation of Isocyanates: A Combined DFT and Experimental Study

An efficient and mild reaction protocol for the decarbonylation of isocyanates has been developed using catalytic amounts of Lewis acidic boranes. The electronic nature (electron withdrawing, electron neutral, and electron donating) and the position of the substituents (ortho/meta/para) bound to isocyanate controls the chain length and composition of the products formed in the reaction. Detailed DFT studies were undertaken to account for the formation of the mono/di‐carboxamidation products and benzoxazolone compounds.

Transition-Metal-Free Heterocyclic Carbon-Boron Bond Formation

Heteroaryl boronic acids and esters are extremely important and valuable intermediates because of their wide application in the synthesis of marketed drugs and bioactive compounds. Over the last couple of decades, the construction of highly important heteroaryl carbon-boron bonds has created huge attention. The transition-metal-free protocols are more green, less sensitive to air and moisture, and also economically advantageous over the transition-metal-based protocols. The transition-metal-free C-H borylation of heteroarenes and C-X (X=halogen) borylation of heteroaryl halides represents an excellent approach for their synthesis. Also, various cyclization and alkyne activation protocols have been recently established for their synthesis. The goal of this review article is to summarize the existing literature and the current state of the art for transition-metal-free synthesis of heteroaryl boronic acid and esters.