Effects of Toxic Substances on Natural Bacterial Assemblages Determined by Means of [ 3 H]Thymidine Incorporation

Recent Developments in Biological Processing Technology for Palm Oil Mill Effluent Treatment-A Review

POME is the most voluminous waste generated from palm oil milling activities. The discharge of POME into the environment without any treatment processing could inflict an undesirable hazard to humans and the environment due to its high amount of toxins, organic, and inorganic materials. The treatment of POME prior to discharge into the environment is utmost required to protect the liability for human health and the environment. Biological treatments are preferable due to eco-friendly attributes that are technically and economically feasible. The goal of this review article is to highlight the current state of development in the biological processing technologies for POME treatment. These biological processing technologies are conducted in the presence of fungi, bacteria, microalgae, and a consortium of microorganisms. Numerous microbes are listed to identify the most efficient strain by monitoring the BOD, COD, working volume of the reactor, and treatment time. The most effective processing technology for POME treatment uses an upflow anaerobic sludge blanket reactor with the COD value of 99%, hydraulic retention time of 7.2 days, and a working volume of 4.7 litres. Biological processing technologies are mooted as an efficient and sustainable management practice of POME waste.

Tolerance (PICT) of the bacterial communities to copper in vineyards soils from Spain

To detect effects of Cu pollution, the Cu tolerance of soil bacterial communities extracted from several vineyards located in NW Spain was measured. Bacterial community tolerance was estimated by means of the thymidine (TdR) and leucine (Leu) incorporation techniques using either IC(50) values (the log of the metal concentration that reduced incorporation to 50%) or the percentage of activity at one specific Cu concentration (10(-6) mol L(-1)). The tolerance measurements by the TdR incorporation technique were similar to those obtained by the Leu incorporation method, indicating that the two methods were equivalent in terms of suitability for detecting the toxicity of Cu to soil bacterial communities. The two tolerance indices considered (IC50 values and percentage of activity) were closely correlated (r = 0.975, P < 0.001), showing that both were equally good in measuring Cu tolerance of the bacterial community. An increased bacterial community tolerance to Cu, indicating a pollution effect, was observed in vineyard soils with more than 100 mg Cu kg(-1) soil. Thus, the long-term use of Cu in vineyards has a toxic effect on the soil bacterial community, resulting in an increased tolerance. An effect of increased levels of Cu could not be detected when measuring bacterial community activity, pointing to the increased sensitivity to detect toxicity in field studies using tolerance measurements.

Soil microbial community response to hexavalent chromium in planted and unplanted soil

Theories suggest that rapid microbial growth rates lead to quicker development of metal resistance. We tested these theories by adding hexavalent chromium [Cr(VI)] to soil, sowing Indian mustard (Brassica juncea), and comparing rhizosphere and bulk soil microbial community responses. Four weeks after the initial Cr(VI) application we measured Cr concentration, microbial biomass by fumigation extraction and soil extract ATP, tolerance to Cr and growth rates with tritiated thymidine incorporation, and performed community substrate use analysis with BIOLOG GN plates. Exchangeable Cr(VI) levels were very low, and therefore we assumed the Cr(VI) impact was transient. Microbial biomass was reduced by Cr(VI) addition. Microbial tolerance to Cr(VI) tended to be higher in the Cr-treated rhizosphere soil relative to the non-treated systems, while microorganisms in the Cr-treated bulk soil were less sensitive to Cr(VI) than microorganisms in the non-treated bulk soil. Microbial diversity as measured by population evenness increased with Cr(VI) addition based on a Gini coefficient derived from BIOLOG substrate use patterns. Principal component analysis revealed separation between Cr(VI) treatments, and between rhizosphere and bulk soil treatments. We hypothesize that because of Cr(VI) addition there was indirect selection for fast-growing organisms, alleviation of competition among microbial communities, and increase in Cr tolerance in the rhizosphere due to the faster turnover rates in that environment.

Effects of dissolved and complexed copper on heterotrophic bacterial production in San Diego bay

Bacterial abundance and production, free (uncomplexed) copper ion concentration, total dissolved copper concentration, dissolved organic carbon (DOC), total suspended solids (TSS), and chlorophyll a were measured over the course of 1 year in a series of 27 sample "Boxes" established within San Diego Bay. Water was collected through a trace metal-clean system so that each Box's sample was a composite of all the surface water in that Box. Bacterial production, chlorophyll a, TSS, DOC, and dissolved copper all generally increased from Box 1 at the mouth of the Bay to Box 27 in the South or back Bay. Free copper ion concentration generally decreased from Box 1 to Box 27 presumably due to increasing complexation capacity within natural waters. Based on correlations between TSS, chlorophyll a, bacterial production or DOC and the ratio of dissolved to free Cu ion, both DOC and particulate (bacteria and algae) fractions were potentially responsible for copper complexation, each at different times of the year. CuCl2 was added to bacterial production assays from 0 to 10 microg L(-1) to assess acute copper toxicity to the natural microbial assemblage. Interestingly, copper toxicity appeared to increase with decreases in free copper from the mouth of the Bay to the back Bay. This contrasts the free-ion activity model in which higher complexation capacity should afford greater copper protection. When cell-specific growth rates were calculated, faster growing bacteria (i.e. toward the back Bay) appeared to be more susceptible to free copper toxicity. The protecting effect of natural dissolved organic material (DOM) concentrated by tangential flow ultrafiltration (>1 kDa), illite and kaolinite minerals, and glutathione (a metal chelator excreted by algae under copper stress) was assessed in bacterial production assays. Only DOM concentrate offered any significant protection to bacterial production under increased copper concentrations. Although the potential copper protecting agents were allowed to interact with added copper before natural bacteria were added to production assays, there may be a temporal dose-response relationship that accounts for higher toxicity in short production assays. Regardless, it appears that effective natural complexation of copper in the back portions of San Diego Bay limits exposure of native bacterial assemblages to free copper ion, resulting in higher bacterial production.