Relationships between colony morphotypes and oil tolerance in Rhodococcus rhodochrous

Characterization of trehalolipid biosurfactant produced by the novel marine strain Rhodococcus sp. SP1d and its potential for environmental applications

BACKGROUND

Biosurfactants are surface-active compounds with environmental and industrial applications. These molecules show higher biocompatibility, stability and efficiency compared to synthetic surfactants. On the other hand, biosurfactants are not cost-competitive to their chemical counterparts. Cost effective technology such as the use of low-cost substrates is a promising approach aimed at reducing the production cost. This study aimed to evaluate the biosurfactant production and activity by the novel strain Rhodococcus sp. SP1d by using different growth substrates. Therefore, to exploit the biosurfactant synthesized by SP1d for environmental applications, the effect of this compound on the bacteria biofilm formation was evaluated. Eventually, for a possible bioremediation application, the biosurfactant properties and its chemical characteristics were investigated using diesel as source of carbon.

RESULTS

Rhodococcus sp. SP1d evidence the highest similarity to Rhodococcus globerulus DSM 43954^T and the ability to biosynthesize surfactants using a wide range of substrates such as exhausted vegetable oil, mineral oil, butter, n-hexadecane, and diesel. The maximum production of crude biosurfactant after 10 days of incubation was reached on n-hexadecane and diesel with a final yield of 2.38 ± 0.51 and 1.86 ± 0.31 g L^- 1 respectively. Biosurfactants produced by SP1d enhanced the biofilm production of P. protegens MP12. Moreover, the results showed the ability of SP1d to produce biosurfactants on diesel even when grown at 10 and 18 °C. The biosurfactant activity was maintained over a wide range of NaCl concentration, pH, and temperature. A concentration of 1000 mg L^- 1 of the crude biosurfactant showed an emulsification activity of 55% towards both xylene and olive oil and a reduction of 25.0 mN m^- 1 of surface tension of water. Eventually, nuclear magnetic resonance spectroscopy indicated that the biosurfactant is formed by trehalolipids.

CONCLUSIONS

The use of low-cost substrates such as exhausted oils and waste butter reduce both the costs of biosurfactant synthesis and the environmental pollution due to the inappropriate disposal of these residues. High production yields, stability and emulsification properties using diesel and n-hexadecane as substrates, make the biosurfactant produced by SP1d a sustainable biocompound for bioremediation purpose. Eventually, the purified biosurfactant improved the biofilm formation of the fungal antagonistic strain P. protegens MP12, and thus seem to be exploitable to increase the adherence and colonization of plant surfaces by this antagonistic strain and possibly enhance antifungal activity.

Aerobic Degradation Characteristics of Decabromodiphenyl ether through Rhodococcus ruber TAW-CT127 and Its Preliminary Genome Analysis

Decabromodiphenyl ether (BDE-209), a polybrominated diphenyl ether (PBDE) homolog, seriously threatens human health. In this study, a Rhodococcus ruber strain with high BDE-209 degradation activity, named TAW-CT127, was isolated from Tong’an Bay, Xiamen. Under laboratory conditions, the strain’s optimal growth temperature, pH, and salinity are 45 °C, 7.0, and 0–2.5%, respectively. Scanning electron microscopy (SEM) analysis shows that TAW-CT127 is damaged when grown in manual marine culture (MMC) medium with BDE-209 as the sole carbon source instead of eutrophic conditions. In the dark, under the conditions of 28 °C, 160 rpm, and 3 g/L (wet weight) TAW-CT127, the degradation rate of 50 mg/L BDE-209 is 81.07%. The intermediate metabolites are hexabromo-, octabromo-, and nonabromo-diphenyl ethers. Through whole-genome sequencing, multiple dehalogenases were found in the genome of TAW-CT127; these may be involved in the production of lower-brominated diphenyl ethers. Additionally, biphenyl-2,3-dioxygenase (BDO) in TAW-CT127 may catalyze the debromination reaction of BDE-209. Our research provides a new high-efficiency strain for bioremediation of BDE-209 pollution, and lays the foundation for the preliminary exploration of genes associated with BDE-209 degradation.

Stress response in Rhodococcus strains

Rhodococci are bacteria which can survive under various extreme conditions, in the presence of toxic compounds, and in other hostile habitats. Their tolerance of unfavorable conditions is associated with the structure of their cell wall and their large array of enzymes, which degrade or detoxify harmful compounds. Their physiological and biotechnological properties, together with tools for their genetic manipulation, enable us to apply them in biotransformations, biodegradation and bioremediation. Many such biotechnological applications cause stresses that positively or negatively affect their efficiency. Whereas numerous reviews on rhodococci described their enzyme activities, the optimization of degradation or production processes, and corresponding technological solutions, only a few reviews discussed some specific effects of stresses on the physiology of rhodococci and biotechnological processes. This review aims to comprehensively describe individual stress responses in Rhodococcus strains, the interconnection of different types of stresses and their consequences for cell physiology. We examine here the responses to (1) environmental stresses (desiccation, heat, cold, osmotic and pH stress), (2) the presence of stress-inducing compounds (metals, organic compounds and antibiotics) in the environment (3) starvation and (4) stresses encountered during biotechnological applications. Adaptations of the cell envelope, the formation of multicellular structures and stresses induced by the interactions of hosts with pathogenic rhodococci are also included. The roles of sigma factors of RNA polymerase in the global regulation of stress responses in rhodococci are described as well. Although the review covers a large number of stressful conditions, our intention was to provide an overview of the selected stress responses and their possible connection to biotechnological processes, not an exhaustive survey of the scientific literature. The findings on stress responses summarized in this review and the demonstration of gaps in current knowledge may motivate researchers working to fill these gaps.

Biodegradation of Total Petroleum Hydrocarbons in Soil: Isolation and Characterization of Bacterial Strains from Oil Contaminated Soil

In this study, we isolated seven strains (termed BY1–7) from polluted soil at an oil station and evaluated their abilities to degrade total petroleum hydrocarbons (TPHs). Following 16 rRNA sequence analysis, the strains were identified as belonging to the genera Bacillus, Acinetobacter, Sphingobium, Rhodococcus, and Pseudomonas, respectively. Growth characterization studies indicated that the optimal growth conditions for the majority of the strains was at 30 °C, with a pH value of approximately 7. Under these conditions, the strains showed a high TPH removal efficiency (50%) after incubation in beef extract peptone medium for seven days. Additionally, we investigated the effect of different growth media on growth impact factors that could potentially affect the strains’ biodegradation rates. Our results suggest a potential application for these strains to facilitate the biodegradation of TPH-contaminated soil.

Features of diclofenac biodegradation by Rhodococcus ruber IEGM 346

This study investigated the ability of rhodococci to biodegrade diclofenac (DCF), one of the polycyclic non-steroidal anti-inflammatory drugs (NSAIDs) most frequently detected in the environment. Rhodococcus ruber strain IEGM 346 capable of complete DCF biodegradation (50 µg/L) over 6 days was selected. It is distinguished by the ability to degrade DCF at high (50 mg/L) concentrations unlike other known biodegraders. The DCF decomposition process was accelerated by adding glucose and due to short-term cell adaptation to 5 µg/L DCF. The most typical responses to DCF exposure observed were the changed ζ-potential of bacterial cells; increased cell hydrophobicity and total cell lipid content; multi-cellular conglomerates formed; and the changed surface-to-volume ratio. The obtained findings are considered as mechanisms of rhodococcal adaptation and hence their increased resistance to toxic effects of this pharmaceutical pollutant. The proposed pathways of bacterial DCF metabolisation were described. The data confirming the C-N bond cleavage and aromatic ring opening in the DCF structure were obtained.

Variation in cell surface characteristics and extracellular polymeric substances during the biodegradation of monocyclic and heterocyclic aromatic hydrocarbons in single and multi-substrate systems

The variation in surface characteristics and the composition of extracellular polymeric substances (EPS) of bacterial cells during biodegradation of single and multi-aromatic hydrocarbons was investigated in the present study. The maximum cell surface hydrophobicity (CSH) of 80.1% was observed during the degradation of toluene. Bacterial cells acquired more negative surface charge with an increase in CSH and vice versa. Proteins constituted the major fraction of EPS during biodegradation of benzene and toluene with protein/carbohydrate ratio varying between 2.19 and 3.1. Carbohydrates constituted the major fraction of EPS in the presence of pyridine. A significant variation in cell surface characteristics was observed in multi-substrate systems involving heterocyclic and monocyclic aromatic hydrocarbons. An increase in EPS production (62.89 mg/g) did not facilitate enhanced degradation of hydrophobic substrates in multi-substrate system involving benzothiophene, benzofuran, benzene and toluene. Under toxic conditions, especially at higher concentration of target pollutants, a significant increase in concentration of polysaccharides was observed compared to proteins.

Rhodococcus rhodochrous ATCC12674 becomes alkane-tolerant upon GroEL2 overexpression and survives in the n-octane phase in two phase culture

We recently reported that the overexpression of GroEL2 played an important role in increasing the alkane tolerance of Rhodococcus erythropolis PR4. In the present study, we examined the effects of the introduction of groEL2 on the alkane tolerance of other Rhodococcus strains. The introduction of groEL2 into Rhodococcus strains led to increased alkane tolerance. The translocation of R. rhodochrous ATCC12674 cells to and survival in the n-octane (C8) phase in two phase culture were significantly enhanced by the introduction of groEL2 derived from strain PR4, suggesting that engineering cells to overexpress GroEL2 represents an effective strategy for enhancing organic solvent tolerance in Rhodococcus.

Enhanced translocation and growth of Rhodococcus erythropolis PR4 in the alkane phase of aqueous-alkane two phase cultures were mediated by GroEL2 overexpression

We previously reported that R. erythropolis PR4 translocated from the aqueous to the alkane phase, and then grew in two phase cultures to which long-chain alkanes had been added. This was considered to be beneficial for bioremediation. In the present study, we investigated the proteins involved in the translocation of R. erythropolis PR4. The results of our proteogenomic analysis suggested that GroEL2 was upregulated more in cells that translocated inside of the pristane (C19) phase than in those located at the aqueous-alkane interface attached to the n-dodecane (C12) surface. PR4 (pK4-EL2-1) and PR4 (pK4-ΔEL2-1) strains were constructed to confirm the effects of the upregulation of GroEL2 in translocated cells. The expression of GroEL2 in PR4 (pK4-EL2-1) was 15.5-fold higher than that in PR4 (pK4-ΔEL2-1) in two phase cultures containing C12. The growth and cell surface lipophilicity of PR4 were enhanced by the introduction of pK4-EL2-1. These results suggested that the plasmid overexpression of groEL2 in PR4 (pK4-EL2-1) led to changes in cell localization, enhanced growth, and increased cell surface lipophilicity. Thus, we concluded that the overexpression of GroEL2 may play an important role in increasing the organic solvent tolerance of R. erythropolis PR4 in aqueous-alkane two phase cultures.

Chemical synthesis of a tetrasaccharide related to the exocellular polysaccharide from Rhodococcus sp. RHA1

Chemical synthesis of the tetrasaccharide related to the exocellular polysaccharide from Rhodococcus sp. RHA1 is reported. The stereoselective glycosylations were achieved by activation of the thioglycoside donors using N-iodosuccinimide in the presence of La(OTf)3 varying temperature per the need of 1,2-cis or 1,2-trans glycosylations. The target tetrasaccharide is reported in the form of its p-methoxyphenyl glycoside that can be cleaved selectively from the per-O-acetylated derivative allowing further glycoconjugate formation using trichloroacetimidate chemistry.

Improvement of organic solvent tolerance by disruption of the lon gene in Escherichia coli

The Lon ATP-dependent protease plays an important role in regulating many biological processes in bacteria. In this study, we examined the organic solvent tolerance of a Δlon mutant of Escherichia coli K-12 and found that the mutant showed remarkably higher organic solvent tolerance than the parent strain. Δlon mutants are known to overproduce capsular polysaccharide, resulting in the formation of mucoid colonies. We considered that this increase in capsular polysaccharide production might be involved in the organic solvent tolerance in E. coli. However, a ΔlonΔwcaJ double-gene mutant displaying a nonmucoid phenotype was as tolerant to organic solvents as the Δlon mutant, suggesting that capsular polysaccharide is not involved in organic solvent tolerance. On the other hand, the Lon protease is known to exhibit proteolytic activity against the transcriptional activators MarA and SoxS, which can enhance the expression level of the AcrAB-TolC efflux pump. We found that the Δlon mutant showed a higher expression level of AcrB than the parent strain. In addition, the ΔlonΔacrB double-gene mutant showed a significant decrease in organic solvent tolerance. Thus, it was shown that organic solvent tolerance in the Δlon mutant depends on the AcrAB-TolC pump but not capsular polysaccharide. E. coli strain JA300 acrRIS marR overexpresses the AcrAB-TolC pump and exhibits high-level solvent tolerance. In an attempt to further improve the solvent tolerance of JA300 acrRIS marR, a lon gene disruptant of this strain was constructed. However, the resulting mutant JA300 acrRIS marR Δlon showed lower solvent tolerance than JA300 acrRIS marR.

Isolation of butanol- and isobutanol-tolerant bacteria and physiological characterization of their butanol tolerance

Despite their importance as a biofuel production platform, only a very limited number of butanol-tolerant bacteria have been identified thus far. Here, we extensively explored butanol- and isobutanol-tolerant bacteria from various environmental samples. A total of 16 aerobic and anaerobic bacteria that could tolerate greater than 2.0% (vol/vol) butanol and isobutanol were isolated. A 16S rRNA gene sequencing analysis revealed that the isolates were phylogenetically distributed over at least nine genera: Bacillus, Lysinibacillus, Rummeliibacillus, Brevibacillus, Coprothermobacter, Caloribacterium, Enterococcus, Hydrogenoanaerobacterium, and Cellulosimicrobium, within the phyla Firmicutes and Actinobacteria. Ten of the isolates were phylogenetically distinct from previously identified butanol-tolerant bacteria. Two relatively highly butanol-tolerant strains CM4A (aerobe) and GK12 (obligate anaerobe) were characterized further. Both strains changed their membrane fatty acid composition in response to butanol exposure, i.e., CM4A and GK12 exhibited increased saturated and cyclopropane fatty acids (CFAs) and long-chain fatty acids, respectively, which may serve to maintain membrane fluidity. The gene (cfa) encoding CFA synthase was cloned from strain CM4A and expressed in Escherichia coli. The recombinant E. coli showed relatively higher butanol and isobutanol tolerance than E. coli without the cfa gene, suggesting that cfa can confer solvent tolerance. The exposure of strain GK12 to butanol by consecutive passages even enhanced the growth rate, indicating that yet-unknown mechanisms may also contribute to solvent tolerance. Taken together, the results demonstrate that a wide variety of butanol- and isobutanol-tolerant bacteria that can grow in 2.0% butanol exist in the environment and have various strategies to maintain structural integrity against detrimental solvents.

Role of interfacial tensions in the translocation of Rhodococcus erythropolis during growth in a two phase culture

Rhodococcus erythropolis PR4 is an alkane-degrading bacterium, which grows well in media containing high concentrations of alkanes. These properties give the organism potential in the bioremediation of various environments contaminated by alkanes. In this study, we report the translocation of R. erythropolis PR4 from an aqueous phase to an alkane phase during growth in a two phase culture medium. When the alkane chain length was between C10 and C12, PR4 was located at the aqueous-alkane interface, but when the alkane chain length was above C14, PR4 translocated into the alkane phase. Complete translocation into alkane phase was accompanied by normal growth, whereas interfacial localization hampered growth, indicating that localization among other possible factors, play an important role in the growth of R. erythropolis PR4 in two phase cultures. The PR4 cell surface was physico-chemically characterized in terms of its cell surface charge and surface free energy. Contact angles were measured on bacterial lawns, followed by thermodynamic analyses of Gibbs free energies for localization of PR4 in the aqueous or alkane phase or at the interface. Although entry into the alkane phase of PR4 grown in the presence of both C12 and C19 was thermodynamically favorable, translocation from the inside of the alkane phase to the interface was only favorable for PR4 grown in the presence of C12. In line with these thermodynamic analyses, two phase partitioning showed that PR4 grown in the presence of C12 and C19 were more hydrophobic than PR4 grown in the presence of lower alkanes, while C12 grown bacteria were less lipophilic than C19 grown bacteria. In conclusion, the localization of R. erythropolis PR4 in a two phase culture medium is thermodynamically driven to facilitate its optimal growth.

Protection against diesel oil toxicity by sodium chloride-induced exopolysaccharides in Acinetobacter sp. strain DR1

Acinetobacter sp. strain DR1 is capable of growth on diesel oil. Interestingly, the degradation of diesel oil by the strain DR1 is enhanced in the presence of sodium chloride (NaCl). However, the growth rate of strain DR1 is not affected by the presence of NaCl. Northern blot analysis has also demonstrated that the effect of NaCl on the degradation of diesel oil is not attributable to increased levels of alkane hydroxylase (AlkM-type) gene expression. Rather, we have noted an increase in the exopolysaccharide (EPS) yields of strain DR1 under high NaCl conditions (9-fold). The lag-time of diesel oil biodegradation was significantly shorter in the strain DR1 with exogenous EPS than in the controls, although EPS alone does not support the growth of strain DR1. The recovery of strain DR1 when exposed to diesel oil was accelerated when exogenous EPS was added to the medium. The overproduction of EPS was also noted in the presence of diesel oil and n-hexadecane. The data indicated that EPS overproduction might play a protective role against diesel oil toxicity. Along with the results of the soil microcosm tests, the data presented herein demonstrated that NaCl-induced EPS is associated with a reduction in diesel oil toxicity, and thus increases diesel oil biodegradation in Acinetobacter sp. strain DR1.

Mucilaginibacter kameinonensis sp., nov., isolated from garden soil

An extracellular polysaccharide-producing bacterium, strain SCK(T), was isolated from a soil sample taken from Kameino, Fujisawa, Japan. The isolate was Gram-negative and cells were non-motile, irregular-shaped rods that grew optimally at 25 degrees C and grew between pH 5 and 8. Strain SCK(T) contained MK-7 as the major isoprenoid quinone, iso-C(15:0) and C(16:1)omega7c and/or iso-C(15:0) 2-OH as the major fatty acids and sphingolipids, with d-17:0 as the main dihydrosphingosine. Flexirubin-type pigments were also present. The DNA G+C content was 43.7 mol%. On the basis of 16S rRNA gene sequence analysis, strain SCK(T) was shown to belong to the genus Mucilaginibacter. The 16S rRNA gene sequence similarity between strain SCK(T) and the two type strains of Mucilaginibacter was 93%. The results of physiological and biochemical tests allowed phenotypic differentiation of the strain from published Mucilaginibacter species. Therefore, strain SCK(T) represents a novel species, for which the name Mucilaginibacter kameinonensis sp. nov. is proposed. The type strain is SCK(T) (=NBRC 102645(T) =KCTC 22227(T)).

High benzene concentrations can favour Gram-positive bacteria in groundwaters from a contaminated aquifer

Exposure to pollution exerts strong selective pressure on microbial communities, which may affect their potential to adapt to current or future environmental challenges. In this microcosm study, we used DNA fingerprinting based on 16S rRNA genes to document the impact of high concentrations of benzene on two bacterial communities from a benzene-contaminated aquifer situated below a petrochemical plant (SIReN, UK). The two groundwaters harboured distinct aerobic benzene-degrading communities able to metabolize benzene to below detection levels (1 microg L(-1)). A benzene concentration of 100 mg L(-1) caused a major shift from Betaproteobacteria to Actinobacteria, in particular Arthrobacter spp. A similar shift from Betaproteobacteria to Arthrobacter spp. and Rhodococcus erythropolis was observed in minimal medium (MM) inoculated with a third groundwater. These Gram-positive-dominated communities were able to grow on benzene at concentrations up to 600 mg L(-1) in groundwater and up to 1000 mg L(-1) in MM, concentrations that cause significant solvent stress to cellular systems. Therefore, Gram-positive bacteria were better competitors than Gram-negative organisms under experimental conditions of high benzene loads, which suggests that solvent-tolerant Gram-positive bacteria can play a role in the natural attenuation of benzene or the remediation of contaminated sites.

The structure of the exocellular polysaccharide produced by Rhodococcus sp. RHA1

Rhodococcus sp. RHA1 is a Gram-positive actinomycete capable of metabolizing a wide spectrum of organic compounds whose survival in chemically hostile environments is believed to be in part due to the production of an exocellular polysaccharide (EPS). In order to investigate the functional nature of the EPS, its structure was determined using a combinatory approach including hydrolysis, composition, and methylation, analysis methods, as well as 2D (1)H and (13)C NMR spectroscopy. The EPS was found to be a high-molecular-mass polymer of a repeating tetrasaccharide unit composed of D-glucuronic acid, D-glucose, D-galactose, L-fucose and O-acetyl (1:1:1:1:1), and has the structure:

Structural analysis of an extracellular polysaccharide produced by Rhodococcus rhodochrous strain S-2

A possibility has been suggested of applying the EPS produced by Rhodococcus rhodochrous strain S-2 (S-2 EPS) to the bioremediation of oil-contaminated environments, because its addition, together with minerals, to oil-contaminated seawater resulted in emulsification of the oil, increased the degradation of polyaromatic hydrocarbons (PAH) of the oil, and led to the dominance of PAH-degrading marine bacteria. To understand the underlying principles of these phenomena, we determined the chemical structure of the sugar chain of S-2 EPS. The EPS was found to be composed of D-galactose, D-mannose, D-glucose, and D-glucuronic acid, in a molar ratio of 1:1:1:1. In addition, 0.8% (w/w) of octadecanoic acid and 2.7% (w/w) of hexadecanoic acid were also contained in its structure. By 1H and 13C NMR spectroscopy, including 2D DQF-COSY, TOCSY, HMQC, HMBC, and NOESY experiments, as well as chemical and enzymatic analyses, the polysaccharide was shown to consist of tetrasaccharide repeating units with the following structure: (see formula in text).

Differential responses of a mine tailings Pseudomonas isolate to cadmium and lead exposures

We examined cadmium and lead resistance in Pseudomonas sp. S8A, an isolate obtained from mine tailings-contaminated soil. Resistant to soluble metal concentrations up to 200 mg l(-1) cadmium and 300 mg l(-1) lead, S8A produced both exopolymer and biosurfactant. Upon growth, this pseudomonad diverged into two morphologically distinct colony subtypes; small and round or large and flat. In the presence of lead and in the no metal control the large morphotype appeared only in late stationary phase. With cadmium the large morphotype appeared immediately following exposure. Results show that the large morphotype produced greater amounts of surfactant than the small morphotype, suggesting a unique subpopulation response to cadmium toxicity. Results also indicate that an unidentified 28 kDa protein was expressed following exposure to >10 mg l(-1) cadmium. This study demonstrates new links between surfactant production, differential subpopulation response and metal exposure.

Variability in Pseudomonas aeruginosa lipopolysaccharide expression during crude oil degradation

Bacterial utilization of crude oil components, such as the n-alkanes, requires complex cell surface adaptation to allow adherence to oil. To better understand microbial cell surface adaptation to growth on crude oil, the cell surface characteristics of two Pseudomonas aeruginosa strains, U1 and U3, both isolated from the same crude oil-degrading microbial community enriched on Bonny Light crude oil (BLC), were compared. Analysis of growth rates demonstrated an increased lag time for U1 cells compared to U3 cells. Amendment with EDTA inhibited U1 and U3 growth and degradation of the n-alkane component of BLC, suggesting a link between cell surface structure and crude oil degradation. U1 cells demonstrated a smooth-to-rough colony morphology transition when grown on BLC, while U3 cells exhibited rough colony morphology at the outset. Combining high-resolution atomic force microscopy of the cell surface and sodium dodecyl sulfate-polyacrylamide gel electrophoresis of extracted lipopolysaccharides (LPS), we demonstrate that isolates grown on BLC have reduced O-antigen expression compared with that of glucose-grown cells. The loss of O-antigen resulted in shorter LPS molecules, increased cell surface hydrophobicity, and increased n-alkane degradation.

Extracellular polysaccharides of Rhodococcus rhodochrous S-2 stimulate the degradation of aromatic components in crude oil by indigenous marine bacteria

Rhodococcus rhodochrous S-2 produces extracellular polysaccharides (S-2 EPS) containing D-glucose, D-galactose, D-mannose, D-glucuronic acid, and lipids, which is important to the tolerance of this strain to an aromatic fraction of (AF) Arabian light crude oil (N. Iwabuchi, N. Sunairi, H. Anzai, M. Nakajima, and S. Harayama, Appl. Environ. Microbiol. 66:5073-5077, 2000). In the present study, we examined the effects of S-2 EPS on the growth of indigenous marine bacteria on AF. Indigenous bacteria did not grow significantly in seawater containing AF even when nitrogen, phosphorus, and iron nutrients were supplemented. The addition of S-2 EPS to seawater containing nutrients and AF resulted in the emulsification of AF, promotion of the growth of indigenous bacteria, and enhancement of the degradation of AF by the bacteria. PCR-denaturing gradient gel electrophoresis analyses show that addition of S-2 EPS to the seawater containing nutrients and AF changed the composition of the bacterial populations in the seawater and that bacteria closely related to the genus Cycloclasticus became the major population. These results suggest that Cycloclasticus was responsible for the degradation of hydrocarbons in AF. The effects of 15 synthetic surfactants on the degradation of AF by indigenous marine bacteria were also examined, but enhancement of the degradation of AF was not significant. S-2 EPS was hence the most effective of the surfactants tested in promoting the biodegradation of AF and may thus be an attractive agent to use in the bioremediation of oil-contaminated marine environments.