Two enhancer elements for DNA replication of pSC101, par and a palindromic binding sequence of the Rep protein

Heteroresistance at the single-cell level: adapting to antibiotic stress through a population-based strategy and growth-controlled interphenotypic coordination

Heteroresistance refers to phenotypic heterogeneity of microbial clonal populations under antibiotic stress, and it has been thought to be an allocation of a subset of “resistant” cells for surviving in higher concentrations of antibiotic. The assumption fits the so-called bet-hedging strategy, where a bacterial population “hedges” its “bet” on different phenotypes to be selected by unpredicted environment stresses. To test this hypothesis, we constructed a heteroresistance model by introducing a bla_CTX-M-14 gene (coding for a cephalosporin hydrolase) into a sensitive Escherichia coli strain. We confirmed heteroresistance in this clone and that a subset of the cells expressed more hydrolase and formed more colonies in the presence of ceftriaxone (exhibited stronger “resistance”). However, subsequent single-cell-level investigation by using a microfluidic device showed that a subset of cells with a distinguishable phenotype of slowed growth and intensified hydrolase expression emerged, and they were not positively selected but increased their proportion in the population with ascending antibiotic concentrations. Therefore, heteroresistance—the gradually decreased colony-forming capability in the presence of antibiotic—was a result of a decreased growth rate rather than of selection for resistant cells. Using a mock strain without the resistance gene, we further demonstrated the existence of two nested growth-centric feedback loops that control the expression of the hydrolase and maximize population growth in various antibiotic concentrations. In conclusion, phenotypic heterogeneity is a population-based strategy beneficial for bacterial survival and propagation through task allocation and interphenotypic collaboration, and the growth rate provides a critical control for the expression of stress-related genes and an essential mechanism in responding to environmental stresses.

Heteroresistance is essentially phenotypic heterogeneity, where a population-based strategy is thought to be at work, being assumed to be variable cell-to-cell resistance to be selected under antibiotic stress. Exact mechanisms of heteroresistance and its roles in adaptation to antibiotic stress have yet to be fully understood at the molecular and single-cell levels. In our study, we have not been able to detect any apparent subset of “resistant” cells selected by antibiotics; on the contrary, cell populations differentiate into phenotypic subsets with variable growth statuses and hydrolase expression. The growth rate appears to be sensitive to stress intensity and plays a key role in controlling hydrolase expression at both the bulk population and single-cell levels. We have shown here, for the first time, that phenotypic heterogeneity can be beneficial to a growing bacterial population through task allocation and interphenotypic collaboration other than partitioning cells into different categories of selective advantage.

AT-rich region and repeated sequences - the essential elements of replication origins of bacterial replicons

Repeated sequences are commonly present in the sites for DNA replication initiation in bacterial, archaeal, and eukaryotic replicons. Those motifs are usually the binding places for replication initiation proteins or replication regulatory factors. In prokaryotic replication origins, the most abundant repeated sequences are DnaA boxes which are the binding sites for chromosomal replication initiation protein DnaA, iterons which bind plasmid or phage DNA replication initiators, defined motifs for site-specific DNA methylation, and 13-nucleotide-long motifs of a not too well-characterized function, which are present within a specific region of replication origin containing higher than average content of adenine and thymine residues. In this review, we specify methods allowing identification of a replication origin, basing on the localization of an AT-rich region and the arrangement of the origin's structural elements. We describe the regularity of the position and structure of the AT-rich regions in bacterial chromosomes and plasmids. The importance of 13-nucleotide-long repeats present at the AT-rich region, as well as other motifs overlapping them, was pointed out to be essential for DNA replication initiation including origin opening, helicase loading and replication complex assembly. We also summarize the role of AT-rich region repeated sequences for DNA replication regulation.

Molecular dissection of a bifidobacterial replicon

The 2.1-kb cryptic plasmid pCIBAO89 from Bifidobacterium asteroides harbors a 1.4-kb segment which is sufficient for its autonomous replication. The segment is divided into two parts, the presumed replication origin, ori89, and the rep gene encoding the putative 41-kDa Rep89 replication initiation protein. This minimal replication region of pCIBAO89 was functionally dissected by transcriptional analyses as well as by DNA-binding studies, and the information obtained was exploited to create a number of Escherichia coli-Bifidobacterium shuttle vectors capable of transforming various bifidobacteria with an efficiency of up to 10(6) transformants/mug DNA.

Ability of IncP-9 plasmid pM3 to replicate in Escherichia coli is dependent on both rep and par functions

IncP-9 plasmids are common in Pseudomonas species and can be transferred to other Gram-negative eubacteria but tend not to be stably maintained outside their natural host genus. A 1.3 kb ori V-rep fragment from IncP-9 plasmid pM3 was sufficient for autonomous replication in Pseudomonas putida but not in Escherichia coli. Replication of ori V-rep in E. coli was restored when additional rep was provided in trans, suggesting that the replication defect resulted from insufficient rep expression from its natural promoter. A promoter deficiency in E. coli was confirmed by reporter gene assays, transcriptional start point mapping and mutation of the promoter recognition elements. Dissection of the pM3 mini-replicon, pMT2, showed that this replication deficiency in E. coli is suppressed by additional determinants from its par operon: ParB, which can be supplied in trans, and its target, the par operon promoter, required in cis to ori V-rep. We propose that ParB binding to its target either changes plasmid DNA and thus promoter conformation or by spreading or looping contacts RNAP at the rep promoter so that rep expression is sufficient to activate ori V.

Two discrete elements are required for the replication of a repABC plasmid: an antisense RNA and a stem-loop structure

The repABC replicons contain an operon encoding the initiator protein (RepC) and partitioning proteins (RepA and RepB). The latter two proteins negatively regulate the transcription of the operon. In this article we have identified two novel regulatory elements, located within the conserved repB-repC intergenic sequence, which negatively modulate the expression of repC, in plasmid p42d of Rhizobium etli. One of them is a small antisense RNA and the other is a stem-loop structure in the repABC mRNA that occludes the Shine-Dalgarno sequence of repC. According to in vivo and in vitro analyses, the small antisense RNA (57-59 nt) resembles canonical negative regulators of replication because: (i) it is transcribed from a strong constitutive promoter (P2), (ii) the transcript overlaps untranslated region upstream of the RepC coding sequences, (iii) the RNA forms one secondary structure acting as a rho-independent terminator, (iv) the antisense RNA is a strong trans-incompatibility factor and (v) its presence reduces the level of repC expression. Surprisingly, both of these seemingly negative regulators are required for efficient plasmid replication.

DnaA boxes in the P1 plasmid origin: the effect of their position on the directionality of replication and plasmid copy number

The DnaA protein is essential for initiation of DNA replication in a wide variety of bacterial and plasmid replicons. The replication origin in these replicons invariably contains specific binding sites for the protein, called DnaA boxes. Plasmid P1 contains a set of DnaA boxes at each end of its origin but can function with either one of the sets. Here we report that the location of origin-opening, initiation site of replication forks and directionality of replication do not change whether the boxes are present at both or at one of the ends of the origin. Replication was bidirectional in all cases. These results imply that DnaA functions similarly from the two ends of the origin. However, origins with DnaA boxes proximal to the origin-opening location opened more efficiently and maintained plasmids at higher copy numbers. Origins with the distal set were inactive unless the adjacent P1 DNA sequences beyond the boxes were included. At either end, phasing of the boxes with respect to the remainder of the origin influenced the copy number. Thus, although the boxes can be at either end, their precise context is critical for efficient origin function.

Sequence analysis of the cryptic plasmid pMG101 from Rhodopseudomonas palustris and construction of stable cloning vectors

A 15-kb cryptic plasmid was obtained from a natural isolate of Rhodopseudomonas palustris. The plasmid, designated pMG101, was able to replicate in R. palustris and in closely related strains of Bradyrhizobium japonicum and phototrophic Bradyrhizobium species. However, it was unable to replicate in the purple nonsulfur bacterium Rhodobacter sphaeroides and in Rhizobium species. The replication region of pMG101 was localized to a 3.0-kb SalI-XhoI fragment, and this fragment was stably maintained in R. palustris for over 100 generations in the absence of selection. The complete nucleotide sequence of this fragment revealed two open reading frames (ORFs), ORF1 and ORF2. The deduced amino acid sequence of ORF1 is similar to sequences of Par proteins, which mediate plasmid stability from certain plasmids, while ORF2 was identified as a putative rep gene, coding for an initiator of plasmid replication, based on homology with the Rep proteins of several other plasmids. The function of these sequences was studied by deletion mapping and gene disruptions of ORF1 and ORF2. pMG101-based Escherichia coli-R. palustris shuttle cloning vectors pMG103 and pMG105 were constructed and were stably maintained in R. palustris growing under nonselective conditions. The ability of plasmid pMG101 to replicate in R. palustris and its close phylogenetic relatives should enable broad application of these vectors within this group of alpha-proteobacteria.

Isolation and characterization of plasmid pSW200 from Erwinia stewartii

The nucleotide sequence of pSW200 of Erwinia stewartii SW2 was determined. This plasmid is 4367 bp long, consisting of four mobilization genes, mobCABD, and an origin of replication homologous to those of ColE1-type plasmids. The plasmid also contains a region of forty-one 15-bp repeats. Deleting this region does not affect the stability or the copy number when maintained as sole plasmid in the cell. However, the plasmid is rapidly lost when a homoplasmid with the intact repeat region is introduced into the cell. The function of this region may provide pSW200 an advantage in competing with an incompatible plasmid in the cell.

A suppressor of mutations in the region adjacent to iterons of pSC101 ori

Some single-base changes in a 14-bp region (the downstream region) adjacent to three repeated sequences (iterons) in pSC101 ori are very deleterious for replication. We isolated a host suppressor mutation for one of these mutations and found that the suppressor suppressed all the mutations tested in the downstream region. The nucleotide sequence of the suppressor revealed that the suppressor gene was identical to dksA, which encodes a multicopy suppressor of the heat shock gene dnaK.

Open strands adjacent to iterons promote the binding of the replication initiator protein (Rep) of pSC101 to the unit sequence of the iterons in vitro

The purified dimeric form of the Rep protein, a replication initiator protein of the plasmid pSC101, has a low affinity for repeated sequences, iterons, in the replication origin of the plasmid, and higher affinities for two inverted repeats in the operator region of the rep gene resulting in its functioning as an autorepressor. Studies of binding to various synthetic DNA have established that Rep can bind to duplex iteron-sequence carrying open (non-complementary) strands at one end proximal to the rep gene. Open strands at the opposite end of the iteron have no effect on Rep-binding. One open strand seems to be required in a sequence-specific fashion. A randomly sequenced duplex DNA with the open strands cannot bind to Rep but can function as a significant competitor. This suggests that Rep has some affinity for the open strands and forms a stable complex with the adjacent iteron. The mutated Rep protein, Rep1, which causes an increase in the plasmid copy number in vivo, has equally high affinity for the iteron with the open strands as wild type Rep, though it has a lower affinity for the inverted repeats than the wild type. The Rep dimer might bind to these DNA sequences with different modes.

Boundaries of the pSC101 minimal replicon are conditional

The DNA segment essential for plasmid replication commonly is referred to as the core or minimal replicon. We report here that host and plasmid genes and sites external to the core replicon of plasmid pSC101 determine the boundaries and competence of the replicon and also the efficiency of partitioning. Missense mutations in the plasmid-encoded RepA protein or mutation of the Escherichia coli topoisomerase I gene enable autonomous replication of a 310-bp pSC101 DNA fragment that contains only the actual replication origin plus binding sites for RepA and the host-encoded DnaA protein. However, in the absence of a repA or topA mutation, the DNA-bending protein integration host factor (IHF) and either of two cis-acting elements are required. One of these, the partitioning (par) locus, is known to promote negative DNA supercoiling; our data suggest that the effects of the other element, the inverted repeat (IR) sequences that overlap the repA promoter, are mediated through the IR's ability to bind RepA. The concentrations of RepA and DnaA, which interact with each other and with plasmid DNA in the origin region (T. T. Stenzel, T. MacAllister, and D. Bastia, Genes Dev. 5:1453-1463, 1991), also affect both replication and partitioning. Our results, which indicate that the sequence requirements for replication of pSC101 are conditional rather than absolute, compel reassessment of the definition of a core replicon. Additionally, they provide further evidence that the origin region RepA-DnaA-DNA complex initiating replication of pSC101 also mediates the partitioning of pSC101 plasmids at cell division.