Development of a One-Step Multiplex PCR Assay for Differential Detection of Major Mycobacterium Species

Non-Microbiological Mycobacterial Detection Techniques for Quality Control of Biological Products: A Comprehensive Review

Mycobacteria can be one of the main contaminants of biological products, and their presence can have serious consequences on patients' health. For this reason, the European Pharmacopoeia mandates the specific testing of biological products for mycobacteria, a critical regulatory requirement aimed at ensuring the safety of these products before they are released to the market. The current pharmacopeial reference, i.e., microbial culture method, cannot ensure an exhaustive detection of mycobacteria due to their growth characteristics. Additionally, the method is time consuming and requires a continuous supply of culture media, posing logistical challenges. Thus, to overcome these issues, pharmaceutical industries need to consider alternative non-microbiological techniques to detect these fastidious, slow-growing contaminating agents. This review provides an overview of alternative methods, which could be applied within a quality control environment for biological products and underlines their advantages and limitations. Nucleic acid amplification techniques or direct measurement of mycobacteria stand out as the most suitable alternatives for mycobacterial testing in biological products.

Integrating Paper-Based Microfluidics and Lateral Flow Strip into Nucleic Acid Amplification Device toward Rapid, Low-Cost, and Visual Diagnosis of Multiple Mycobacteria

Efficient diagnosis of mycobacterial infections can effectively manage and prevent the transmission of infectious diseases. Unfortunately, existing diagnostic strategies are challenged by long assay times, high costs, and highly specialized expertise to distinguish between pulmonary tuberculosis (PTB) and nontuberculous mycobacterial pulmonary diseases (NTM-PDs). Herein, in this study, an optimized 3D paper-based analytical device (µPAD) is incorporated with a closed lateral flow (LF) strip into a loop-mediated isothermal amplification (LAMP) device (3D-µPAD-LF-LAMP) for rapid, low-cost, and visual detection of pathogenic mycobacteria. The platform's microfluidic feature enhanced the nucleic acid amplification, thereby reducing the costs and time as compared to boiling, easyMAG, and QIAGEN techniques. Moreover, the LF unit is specifically designed to minimize aerosol contamination for a user-friendly and visual readout. 3D-µPAD-LF-LAMP is optimized and assessed using standard strains, demonstrating a limit of detection (LOD) down to 10 fg reaction-1 . In a cohort of 815 patients, 3D-µPAD-LF-LAMP displays significantly better sensitivity, specificity, negative predictive value (NPV), positive predictive value (PPV), and diagnostic accuracy than conventional bacterial culture and Xpert techniques. Collectively, 3D-µPAD-LF-LAMP demonstrates enhanced accessibility, efficiency, and practicality for the diagnosis of multiple pathogenic mycobacteria, which can be applied across diverse clinical settings, thereby ultimately improving public health outcomes.

Antimicrobial drug resistant features of Mycobacterium tuberculosis associated with treatment failure

Tuberculosis stands as a prominent cause of mortality in developing countries. The treatment of tuberculosis involves a complex procedure requiring the administration of a panel of at least four antimicrobial drugs for the duration of six months. The occurrence of treatment failure after the completion of a standard treatment course presents a serious medical problem. The purpose of this study was to evaluate antimicrobial drug resistant features of Mycobacterium tuberculosis associated with treatment failure. Additionally, it aimed to evaluate the effectiveness of second line drugs such as amikacin, linezolid, moxifloxacin, and the efflux pump inhibitor verapamil against M. tuberculosis isolates associated with treatment failure. We monitored 1200 tuberculosis patients who visited TB centres in Lahore and found that 64 of them were not cured after six months of treatment. Among the M. tuberculosis isolates recovered from the sputum of these 64 patients, 46 (71.9%) isolates were simultaneously resistant to rifampicin and isoniazid (MDR), and 30 (46.9%) isolates were resistant to pyrazinamide, Resistance to amikacin was detected in 17 (26,5%) isolates whereas resistance to moxifloxacin and linezolid was detected in 1 (1.5%) and 2 (3.1%) isolates respectively. Among MDR isolates, the additional resistance to pyrazinamide, amikacin, and linezolid was detected in 15(23.4%), 4(2.6%) and 1(1.56%) isolates respectively. One isolate simultaneously resistant to rifampicin, isoniazid, amikacin, pyrazinamide, and linezolid was also identified. In our investigations, the most frequently mutated amino acid in the treatment failure group was Serine 315 in katG. Three novel mutations were detected at codons 99, 149 and 154 in pncA which were associated with pyrazinamide resistance. The effect of verapamil on the minimum inhibitory concentration of isoniazid and rifampicin was observed in drug susceptible isolates but not in drug resistant isolates. Rifampicin and isoniazid enhanced the transcription of the efflux pump gene rv1258 in drug susceptible isolates collected from the treatment failure patients. Our findings emphasize a high prevalence of MDR isolates linked primarily to drug exposure. Moreover, the use of amikacin as a second line drug may not be the most suitable choice in such cases.

Rapid Identification of Nontuberculous Mycobacterium Species from Respiratory Specimens Using Nucleotide MALDI-TOF MS

We performed a prospective study to evaluate the diagnostic accuracy of nucleotide matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) in identifying nontuberculous mycobacterium (NTM) from clinical respiratory samples. A total of 175 eligible patients were prospectively enrolled, including 108 patients diagnosed with NTM pulmonary disease (NTM-PD) and 67 control patients with other diseases. All specimens were subjected to acid-fast staining, liquid culture combined with MPT64 antigen detection, and a nucleotide MALDI-TOF MS assay. NTM cultures were also subjected to the MeltPro Myco assay for species identification. Altogether, the sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of nucleotide MALDI-TOF MS were 77.8% (95% CI: 68.6-85.0%), 92.5% (82.8-97.2%), 94.4% (86.8-97.9%), and 72.1% (61.2-81.0%), respectively; these results were not statistically different from the results of culture + MPT64 antigen testing (75.0% [65.6-82.6%], 95.5% [86.6-98.8%], 96.4% [89.2-99.1%], and 70.3% [59.7-79.2%], respectively). In the identification of NTM species, of the 84 nucleotide MALDI-TOF MS positive samples, 77 samples (91.7%) were identified at the species level. Using culture + MeltPro Myco assay as the reference standard, nucleotide MALDI-TOF MS correctly identified 77.8% (63/81) of NTM species. Our results demonstrated that the nucleotide MALDI-TOF MS assay was a rapid single-step method that provided the reliable detection of NTM and identification of NTM species. This new method had the same sensitivity and specificity as the culture + MPT64 antigen method, but was much more rapid.

Development of a safety protocol for training and using SARS-CoV-2 detection dogs: A pilot study

Medical detection dogs have potential to be used to screen asymptomatic patients in crowded areas at risk of epidemics such as the SARS-CoV-2 pandemic. However, the fact that SARS-CoV-2 detection dogs are in direct contact with infected people or materials raises important concerns due to the zoonotic potential of the virus. No study has yet recommended a safety protocol to ensure the health of SARS- CoV-2 detection dogs during training and working in public areas. This study sought to identify suitable decontamination methods to obtain nonpathogenic face mask samples while working with SARS-CoV-2 detection dogs and to investigate whether dogs were able to adapt themselves to other decontamination procedures once they were trained for a specific odor. The present study was designed as a four-phase study: (a) Method development, (b) Testing of decon- tamination methods, (c) Testing of training methodology, and (d) Real life scenario. Surgical face masks were used as scent samples. In total, 3 dogs were trained. The practical use of 3 different decontam- ination procedures (storage, heating, and UV-C light) while training SARS-CoV-2 detection dogs were tested. The dog trained for the task alerted to the samples inactivated by the storage method with a sensitivity of100 % and specificity of 98.28 %. In the last phase of this study, one dog of 2 dogs trained, alerted to the samples inactivated by the UV-C light with a sensitivity of 91.30% and specificity of 97.16% while the other dog detected the sample with a sensitivity of 96.00% and specificity of 97.65 %.

Atypical Mycobacteriosis Due to Mycobacterium abscessus subsp. massiliense: Our Experince

BACKGROUND

Members of Micobacterium. abscessus complex comprises three subspecies (M. abscessus subsp. Abscessus, M. abscessus subsp. Bolletii, and M. abscessus subsp. Massiliense) and are a rapid-growing nontuberculous mycobacteria present in different aquatic habitats and soil. It often causes a wide spectrum of infections involving pulmonary infections, surgical wound infections, and infections related to mesotherapy, catheters, hemodialysis devices, endocarditis, and disseminated infections in immunocompromised individuals.

METHODS

In this article we comment on the most relevant aspects of nine patients with skin lesions caused by M. abscessus subsp. massiliense infection. Clinical characteristics, histopathology, and molecular identification were performed.

RESULTS

The patients in the clinical cases presented a history of trauma, tattoos, and physical therapy techniques. The most common treatments were minocycline and clindamycin, doxycycline, ceftriaxone, cephalexin, moxifloxacin, rifampicin, and trimethoprim-sulfamethoxazole. The evolution of the treated patients was acceptable, except for one patient, who showed a partial improvement. M. massiliense were identified in all clinical cases using a species-specific PCR.

CONCLUSION

Our series consisted of nine cases of skin biopsies recorded in different years; for this reason, we do not have all the data necessary for a complete description, in particular in four cases, causing limitations in the manuscript, especially in the therapy used and the evolution of patients due to lack of follow-up.

Identification of nontuberculous mycobacteria isolated from household showerheads of patients with nontuberculous mycobacteria

This study aimed to examine whether nontuberculous mycobacteria (NTM) inside household showerheads are identical to those in patients with NTM-pulmonary disease (PD) since household water is one of the potential NTM sources. Samples were obtained from 32 household showerheads of patients with NTM-PD recruited through the Pulmonary Outpatient Department at the Severance Hospital between October 2018 and October 2019. All isolates from patients with NTM-PD were diagnosed using a reverse-hybridization line probe assay based on the ropB gene. To determine the mycobacterial compositions, the washing fluids were collected and investigated using multiplex polymerase chain reaction assay and NTM culture; suspected microbial isolates in these fluids and culture were identified using sequencing analysis of 16S rRNA gene. NTM species causing the PD in the patients were Mycobacterium avium, M. intracellulare, M. abscessus, M. massiliense, and M. fortuitum complex. The mycobacteria isolated from the showerhead were M. lentiflavum, M. gordonae, M. triplex, M. phocaicum, M. mucogenicum, M. florentinum, M. gilvum, M. llatzerense, and M. peregrinum. However, the species identified in the showerheads did not match those of the patients. Despite NTM species in the showerheads, clinical implications in the main pathogenesis associated with the disease in the patients studied were not elucidated.

Molecular surveillance of tuberculosis-causing mycobacteria in wastewater

The surveillance of tuberculosis infections has largely depended on clinical diagnostics and hospitalization data. The advancement in molecular methods creates an opportunity for the adoption of alternative surveillance systems, such as wastewater-based epidemiology. This study presents the use of conventional and advanced polymerase chain reaction techniques (droplet digital PCR) to determine the occurrence and concentration of total mycobacteria and members of the Mycobacterium tuberculosis complex (MTBC) in treated and untreated wastewater. Wastewater samples were taken from three wastewater treatment plants (WWTPs) in the city of Durban, South Africa, known for a high burden of TB/MDR-TB due to HIV infections. All untreated wastewater samples contained total mycobacteria and MTBC at varying percentages per WWTP studied. Other members of the MTBC related to tuberculosis infection in animals, M. bovis and M. caprae were also detected. The highest median concentration detected in untreated wastewater was up to 4.9 (±0.2) Log10 copies/ml for total mycobacteria, 4.0 (±0.85) Log10 copies/ml for MTBC, 3.9 (±0.54) Log10 copies/ml for M. tuberculosis, 2.7 (±0.42) Log10 copies/ml for M. africanum, 4.0 (±0.29) Log10 copies/ml for M. bovis and 4.5 (±0.52) Log10 copies/ml for M. caprae. Lower concentrations were detected in the treated wastewater, with a statistically significant difference (P-value ≤ 0.05) in concentrations observed. The log reduction achieved for these bacteria in the respective WWTPs was not statistically different, indicating that the treatment configuration did not have an impact on their removal. The detection of M. africanum in wastewater from South Africa shows that it is possible that some of the TB infections in the community could be caused by this mycobacterium. This study, therefore, highlights the potential of wastewater-based epidemiology for monitoring tuberculosis infections.

Evaluation of a new assay for nontuberculous mycobacteria species identification in diagnostic material and cultures

The purpose of the present study was to evaluate a real-time PCR system for 12 nontuberculous mycobacteria (NTM) species identification developed by Central Tuberculosis Research Institute (CTRI; Moscow, Russia) in cooperation with Syntol LLC (Moscow, Russia). NTM cultures (210 strains, 19 species), Mycobacterium tuberculosis complex (MTBC) cultures (21 strains, 2 species), non-mycobacterial microorganisms (18 strains, 13 species) were used for the first stage of the assay evaluation. Clinical samples (sputum, N = 973) positive for smear microscopy and MTBC/NTM DNA by a PCR-based screening assay collected from 819 patients were used for specificity and sensitivity evaluation. Sensitivity for determining the NTM species directly from diagnostic material was 99.71%, with the specificity of 100%. The sensitivity and specificity for NTM species identification in cultures was 99.67% and 100%, respectively. Both sensitivity and specificity for determining MTBC in cultures was 100%.

Development of a One-Step Multiplex PCR Assay for Differential Detection of Four species (Enterobacter cloacae, Enterobacter hormaechei, Enterobacter roggenkampii, and Enterobacter kobei) Belonging to Enterobacter cloacae Complex With Clinical Significance

Enterobacter cloacae complex (ECC) is composed of multiple species and the taxonomic status is consecutively updated. In last decades ECC is frequently associated with multidrug resistance and become an important nosocomial pathogen. Currently, rapid and accurate identification of ECC to the species level remains a technical challenge, thus impedes our understanding of the population at the species level. Here, we aimed to develop a simple, reliable, and economical method to distinguish four epidemiologically prevalent species of ECC with clinical significance, i.e., E. cloacae, E. hormaechei, E. roggenkampii, and E. kobei. A total of 977 ECC genomes were retrieved from the GenBank, and unique gene for each species was obtained by core-genome comparisons. Four pairs of species-specific primers were designed based on the unique genes. A total of 231 ECC clinical strains were typed both by hsp60 typing and by species-specific PCRs. The specificity and sensitivity of the four species-specific PCRs ranged between 96.56% and 100% and between 76.47% and 100%, respectively. The PCR for E. cloacae showed the highest specificity and sensitivity. A one-step multiplex PCR was subsequently established by combining the species-specific primers. Additional 53 hsp60-typed ECC and 20 non-ECC isolates belonging to six species obtained from samples of patients, sewage water and feces of feeding animals were tested by the multiplex PCR. The identification results of both techniques were concordant. The multiplex PCR established in this study provides an accurate, expeditious, and cost-effective way for routine diagnosis and molecular surveillance of ECC strains at species level.

Nucleic acid amplification techniques for rapid diagnosis of nontuberculous mycobacteria: A protocol of systematic review and meta-analysis

BACKGROUND

Nontuberculous mycobacteria (NTM) infection is similar to Mycobacterium tuberculosis (MTB) infection. Early clinical identification and differentiation of NTM and MTB infections continues to be a major challenge. Nucleic acid amplification tests (NAATs) have the ability to efficiently and rapidly detect pathogens and are widely used in mycobacterial infections. The objective of this study is to estimate the diagnostic accuracy of NAATs for NTM.

METHODS

We will search candidate studies that assessing the accuracy of NAATs for diagnosis of NTM through PubMed, Embase and the Cochrane Library until May 2021. Studies with full text that meet the inclusion criteria will be included. Following a revised tool for Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2), two researchers will independently evaluate the study quality. The STATA software (version 15.0) will be used to carry out meta-analyses. When heterogeneity is observed, subgroup analyses and meta-regression analyses will be used to explore sources of heterogeneity. Sensitivity analyses will be used to check the robustness of analyses.

CONCLUSION

We hope that this study will provide meaningful evidence for the early and rapid diagnosis of NAATs for NTM, which will help to guide the treatment of NTM and improve the prognosis of patients.

PCR-reverse blot hybridization assay in respiratory specimens for rapid detection and differentiation of mycobacteria in HIV-negative population

Background

Rapid identification of pathogenic Mycobacterium species is critical for a successful treatment. However, traditional method is time-consuming and cannot discriminate isolated non-tuberculosis mycobacteria (NTM) at species level. In the retrospective study, we evaluated the clinical applicability of PCR-reverse blot hybridization assay (PCR-REBA Myco-ID) with clinical specimens for rapid detection and differentiation of mycobacterial species.

Methods

A total of 334 sputum and 362 bronchial alveolar lavage fluids (BALF) from 696 patients with mycobacterium pulmonary disease (MPD) and 210 patients with non-mycobacterium pulmonary disease used as controls were analyzed. Sputum or BALF were obtained for MGIT 960-TBc ID test and PCR-REBA Myco-ID assay. High resolution melt analysis (HRM) was used to resolve inconsistent results of MGIT 960-TBc ID test and PCR-REBA Myco-ID assay.

Results

A total of 334 sputum and 362 BALF specimens from 696 MPD patients (292 MTB and 404 NTM) were eventually analyzed. In total, 292 MTBC and 436 NTM isolates (mixed infection of two species in 32 specimens) across 10 Mycobacterium species were identified. The most frequently isolated NTM species were M. intracellulare (n = 236, 54.1%), followed by M. abscessus (n = 106, 24.3%), M. kansasii (n = 46, 10.6%), M. avium (n = 36, 8.3%). Twenty-two cases had M. intracellulare and M. abscessus mixed infection and ten cases had M. avium and M. abscessus mixed infection. A high level of agreement (n = 696; 94.5%) was found between MGIT 960-TBc ID and PCR-REBA Myco-ID (k = 0.845, P = 0.000). PCR-REBA Myco-ID assay had higher AUC for both MTBC and NTM than MGIT 960-TBc ID test.

Conclusion

PCR-REBA Myco-ID has the advantages of rapid, comparatively easy to perform, relatively low cost and superior accuracy in mycobacterial species identification compared with MGIT 960-TBc ID. We recommend it into workflow of mycobacterial laboratories especially in source-limited countries.

Identification of Nontuberculous Mycobacteria in Patients with Pulmonary Diseases in Gyeongnam, Korea, Using Multiplex PCR and Multigene Sequence-Based Analysis

Background

Nontuberculous mycobacteria (NTM) are widely present in environments, such as soil and water, and have recently been recognized as important pathogenic bacteria. The incidence of NTM-related infections is steadily increasing. As the diagnosis and treatment of NTM infection should be distinguished from tuberculosis, and the treatment should be specific to the species of NTM acquired, accurate species identification is required.

Methods

In this study, two-step multiplex PCR (mPCR) and multigene sequence-based analysis were used to accurately identify NTM species in 320 clinical isolates from Gyeongsang National University Hospital (GNUH). In particular, major mycobacterial strains with a high isolation frequency as well as coinfections with multiple species were diagnosed through two-step mPCR. Multigene sequencing was performed to accurately identify other NTM species not detected by mPCR. Variable regions of the genes 16S rRNA, rpoB, hsp65, and 16S-23S rRNA internal transcribed spacer were included in the analysis.

Results

Two-step mPCR identified 234 (73.1%) cases of M. intracellulare, 26 (8.1%) cases of M. avium subsp. avium, and 13 (4.1%) cases of M. avium subsp. hominissuis infection. Additionally, 9 (2.8%) M. fortuitum, 9 (2.8%) M. massiliense, 2 (0.6%) M. abscessus, and 4 (1.2%) M. kansasii isolates were identified. Coinfection was identified in 7 (2.2%) samples. The sixteen samples not classified by two-step mPCR included 6 (1.9%) cases of M. chimaera, 4 (1.3%) M. gordonae, 1 (0.3%) M. colombiense, 1 (0.3%) M. mageritense, and 1 (0.3%) M. persicum identified by sequence analysis.

Conclusions

The results of this study suggest a strategy for rapid detection and accurate identification of species using two-step mPCR and multigene sequence-based analysis. To the best of our knowledge, this study is the first to report the identification of NTM species isolated from patients in Gyeongnam/Korea.

Differential diagnosis of disseminated Mycobacterium avium and Mycobacterium tuberculosis infection in HIV patients using duplex PCR

Background: Disseminated Mycobacterium avium complex (MAC) and Mycobacterium tuberculosis infections have almost similar clinical presentations but require different therapeutic management. Materials & methods: A duplex PCR was designed based on the sequence variation between the genes encoding catalase-peroxidase (KatG) of M. avium complex and M. tuberculosis, so as to discriminate MAC, M. tuberculosis and mixed mycobacterial (MAC + M. tuberculosis) infections in HIV patients. Results: An accurate, single-step differential diagnosis of disseminated mycobacterial infections in HIV patients was achieved with specific detection of a single band each for M. avium (120 bp) and M. tuberculosis (90 bp) and two bands for the mixed (120 and 90 bp) infections. Conclusion: katG gene-based duplex PCR can facilitate quick differential diagnosis of disseminated MAC and M. tuberculosis infections in HIV patients.

GenSeizer: a Multiplex PCR-Based Targeted Gene Sequencing Platform for Rapid and Accurate Identification of Major Mycobacterium Species

Mycobacterium tuberculosis and nontuberculous mycobacterium (NTM) infections often exhibit similar clinical symptoms. Timely and effective treatment relies on the rapid and accurate identification of species and resistance genotypes. In this study, a new platform (GenSeizer), which combines bioinformatics analysis of a large data set and multiplex PCR-based targeted gene sequencing, was developed to identify 10 major Mycobacterium species that cause pulmonary, as well as extrapulmonary, human diseases. The simultaneous detection of certain erm(41) and rrl resistance genotypes in M. abscessus was also feasible. This platform was specific and sensitive and exhibited no cross-reactivity among reference strains and a detection limit of 5 DNA copies or 50 CFU Mycobacterium/ml. In a blind comparison, GenSeizer and multigene sequencing showed 100% agreement in the ability to identify 88 clinical Mycobacterium isolates. The resistance genotypes, confirmed by whole-genome sequencing of 30 M. abscessus strains, were also correctly identified by GenSeizer 100% of the time. These results indicate that GenSeizer is an efficient, reliable platform for detecting major pathogenic Mycobacterium species.

Ten cases of Mycobacterium avium subsp. hominissuis infections linked to equine abortions in Japan, 2018-2019

Bacterial placentitis in horses commonly results in abortion, premature birth or compromised neonatal foal health. Although mycobacterial infections are generally uncommon in horses, 10 equine abortion cases caused by Mycobacterium avium subsp. hominissuis (MAH) infections occurred between 2018 and 2019 in Japan. They occurred on seven Thoroughbred horse farms in the Hidaka district of Hokkaido, but direct contact among the mares on different farms was not recorded. Most cases were characterized by extensive pathological lesions of the placenta, which are not typical in cases of common pathogenic bacteria such as Streptococcus zooepidemicus and Escherichia coli. All abortions featured white–yellow exudates on the surface of the placenta. Mycobacterial granuloma formations were histologically found in the placenta and fetal organs, and acid‐fast bacteria were isolated from the placenta, fetal samples (heart, lung, liver, kidney, spleen and stomach contents) or uterine lavage fluid. The greatest number of bacteria was isolated from necrotic lesions on the placenta, which could be an important site for bacterial isolation in mycobacterial equine abortions. The isolates were identified as MAH based on internal genome sequences. In variable number tandem repeat analysis, all patterns of the strains were identical. Single nucleotide polymorphism analysis of the core genome grouped all strains in the II‐a/SC3 subcluster. Both results reveal that these strains share the same genetic background, suggesting that the horses had been infected by the same unknown contagious source.

Detection of clinically important non tuberculous mycobacteria (NTM) from pulmonary samples through one-step multiplex PCR assay

Background

The burden of non-tuberculous mycobacterial (NTM) disease is increasing worldwide but still its diagnosis is delayed and it is mistaken as multidrug-resistant tuberculosis (MDR-TB).The present study was performed to develop a multiplex PCR assay for detection and identification of clinically most common NTM to the species level from pulmonary samples.

Results

Out of 50 isolates, 26 were identified as Mycobacterium kansasii (MK), 20 were identified as Mycobacterium abscessus (MA) and 4 were identified as Mycobacterium avium complex (MAC) through multiplex PCR and further confirmed by sequencing.

Conclusion

Our study showed that multiplex PCR assay is a simple, convenient, and reliable technique for detection and differential identification of major NTM species.

Rapid and sensitive detection of Mycobacterium tuberculosis based on strand displacement amplification and magnetic beads

Tuberculosis is one of the main infectious diseases threatening public health, and the development of simple, rapid, and cost-saving methods for tuberculosis diagnosis is of profound importance for tuberculosis prevention and treatment. The bacterium Mycobacterium tuberculosis (MTB) is the pathogen that causes tuberculosis, and assaying for MTB is the only criterion for tuberculosis diagnosis. A new enzyme-free method based on strand displacement amplification and magnetic beads was developed for simple, rapid, and cost-saving MTB detection. Under optimum conditions, a good linear relationship could be observed between fluorescence and MTB specific DNA concentration ranging from 0.05 to 150 nM with a correlation coefficient of 0.993 (n = 8) and a detection limit of 47 pM (3σ/K). The present method also distinguished a one base mismatch from MTB specific DNA, showing great promise for MTB genome single base polymorphism analysis. MTB specific DNA content in polymerase chain reaction samples was successfully detected using the new method, and recoveries were 97.8-100.8%, indicating that the present method had high accuracy and shows good potential for the early diagnosis of tuberculosis.

Exhaled Mycobacterium tuberculosis output and detection of subclinical disease by face-mask sampling: prospective observational studies

BACKGROUND

Tuberculosis remains a global health challenge, with early diagnosis key to its reduction. Face-mask sampling detects exhaled Mycobacterium tuberculosis. We aimed to investigate bacillary output from patients with pulmonary tuberculosis and to assess the potential of face-mask sampling as a diagnostic method in active case-finding.

METHODS

We did a 24-h longitudinal study in patients from three hospitals in Pretoria, South Africa, with microbiologically confirmed pulmonary tuberculosis. Patients underwent 1 h of face-mask sampling eight times over a 24-h period, with contemporaneous sputum sampling. M tuberculosis was detected by quantitative PCR. We also did an active case-finding pilot study in inhabitants of an informal settlement near Pretoria. We enrolled individuals with symptoms of tuberculosis on the WHO screening questionnaire. Participants provided sputum and face-mask samples that were tested with the molecular assay Xpert MTB/RIF Ultra. Sputum-negative and face-mask-positive individuals were followed up prospectively for 20 weeks by bronchoscopy, PET-CT, and further sputum analysis to validate the diagnosis.

FINDINGS

Between Sept 22, 2015, and Dec 3, 2015, 78 patients with pulmonary tuberculosis were screened for the longitudinal study, of whom 24 completed the study (20 had HIV co-infection). M tuberculosis was detected in 166 (86%) of 192 face-mask samples and 38 (21%) of 184 assessable sputum samples obtained over a 24-h period. Exhaled M tuberculosis output showed no diurnal pattern and did not associate with cough frequency, sputum bacillary content, or chest radiographic disease severity. On May 16, 2018, 45 individuals were screened for the prospective active case-finding pilot study, of whom 20 had tuberculosis symptoms and were willing to take part. Eight participants were diagnosed prospectively with pulmonary tuberculosis, of whom six were exclusively face-mask positive at screening. Four of these participants (three of whom were HIV-positive) had normal findings on chest radiography but had treatment-responsive early tuberculosis-compatible lesions on PET-CT scans, with Xpert-positive sputum samples after 6 weeks.

INTERPRETATION

Face-mask sampling offers a highly efficient and non-invasive method for detecting exhaled M tuberculosis, informing the presence of active infection both with greater consistency and at an earlier disease stage than with sputum samples. The approach shows potential for diagnosis and screening, particularly in difficult-to-reach communities.

FUNDING

Wellcome Trust, CARA (Council for At-Risk Academics), University of Leicester, the UK Medical Research Council, and the National Institute for Health Research. VIDEO ABSTRACT.

Cas12a/Guide RNA-Based Platform for Rapid and Accurate Identification of Major Mycobacterium Species

Mycobacterium tuberculosis infection and nontuberculous mycobacteria (NTM) infections exhibit similar clinical symptoms; however, the therapies for these two types of infections are different. Therefore, the rapid and accurate identification of M. tuberculosis and NTM species is very important for the control of tuberculosis and NTM infections. In the present study, a Cas12a/guide RNA (gRNA)-based platform was developed to identify M. tuberculosis and most NTM species. By designing species-specific gRNA probes targeting the rpoB sequence, a Cas12a/gRNA-based platform successfully identified M. tuberculosis and six major NTM species (Mycobacterium abscessus, Mycobacterium intracellulare, Mycobacterium avium, Mycobacterium kansasii, Mycobacterium gordonae, and Mycobacterium fortuitum) without cross-reactivity. In a blind assessment, a total of 72 out of 73 clinical Mycobacterium isolates were correctly identified, which is consistent with previous rpoB sequencing results. These results suggest that the Cas12a/gRNA-based platform is a promising tool for the rapid, accurate, and cost-effective identification of both M. tuberculosis and NTM species.

Development of a Cost-Effective Line Probe Assay for Rapid Detection and Differentiation of Mycobacterium Species: A Pilot Study

BACKGROUND

The line probe assay (LPA) is one of the most accurate diagnostic tools for detection of different Mycobacterium species. Several commercial kits based on the LPA for detection of Mycobacterium species are currently available. Because of their high cost, especially for underdeveloped and developing countries, and the discrepancy of non-tuberculous mycobacteria (NTM) prevalence across geographic regions, it would be reasonable to consider the development of an in-house LPA. The aim of this study was to develop an LPA to detect and differentiate mycobacterial species and to evaluate the usefulness of PCR-LPA for direct application on clinical samples.

METHODS

One pair of biotinylated primers and 15 designed DNA oligonucleotide probes were used based on multiple aligned internal transcribed spacer (ITS) sequences. Specific binding of the PCR-amplified products to the probes immobilized on nitrocellulose membrane strips was evaluated by the hybridization method. Experiments were performed three times on separate days to evaluate the assay's repeatability. The PCR-LPA was evaluated directly on nine clinical samples and their cultivated isolates.

RESULTS

All 15 probes used in this study hybridized specifically to ITS sequences of the corresponding standard species. Results were reproducible for all the strains on different days. Mycobacterium species of the nine clinical specimens and their cultivated isolates were correctly identified by PCR-LPA and confirmed by sequencing.

CONCLUSION

In this study, we describe a PCR-LPA that is readily applicable in the clinical laboratory. The assay is fast, cost-effective, highly specific, and requires no radioactive materials.

Rapid Identification of Clinically Relevant Mycobacterium Species by Multicolor Melting Curve Analysis

The sustained increase in the incidence of nontuberculous mycobacterial (NTM) infection and the difficulty in distinguishing these infections from tuberculosis constitute an urgent need for NTM species-level identification. The MeltPro Myco assay is the first diagnostic system that identifies 19 clinically relevant mycobacteria in a single reaction based on multicolor melting curve analysis run on a real-time PCR platform. The assay was comprehensively evaluated regarding its analytical and clinical performances. The MeltPro Myco assay accurately identified 51 reference mycobacterial strains to the species/genus level and showed no cross-reactivity with 16 nonmycobacterial strains. The limit of detection was 300 bacilli/ml, and 1% of the minor species was detected in the case of mixed infections. Clinical studies using 1,163 isolates collected from five geographically distinct health care units showed that the MeltPro Myco assay correctly identified 1,159 (99.7%) samples. Further testing with 94 smear-positive sputum samples showed that all samples were correctly identified. Additionally, the entire assay can be performed within 3 h. The results of this study confirmed the efficacy of this assay in the reliable identification of mycobacteria, suggesting that it might potentially be used as a screening tool in regions endemic for tuberculosis.

Importance of differential identification of Mycobacterium tuberculosis strains for understanding differences in their prevalence, treatment efficacy, and vaccine development

Tuberculosis (TB), caused by Mycobacterium tuberculosis (Mtb), remains a serious global health problem in the 21^st century because of its high mortality. Mtb is an extremely successful human-adapted pathogen that displays a multifactorial ability to control the host immune response and to evade killing by drugs, resulting in the breakdown of BCG vaccine-conferred anti-TB immunity and development of multidrug-resistant (MDR) and extensively drug-resistant (XDR) Mtb. Although genetic components of the genomes of the Mtb complex strains are highly conserved, showing over 99% similarity to other bacterial genera, recently accumulated evidence suggests that the genetic diversity of the Mtb complex strains has implications for treatment outcomes, development of MDR/XDR Mtb, BCG vaccine efficacy, transmissibility, and epidemiological outbreaks. Thus, new insights into the pathophysiological features of the Mtb complex strains are required for development of novel vaccines and for control of MDR/XDR Mtb infection, eventually leading to refinement of treatment regimens and the health care system. Many studies have focused on the differential identification of Mtb complex strains belonging to different lineages because of differences in their virulence and geographical dominance. In this review, we discuss the impact of differing genetic characteristics among Mtb complex strains on vaccine efficacy, treatment outcome, development of MDR/XDR Mtb strains, and epidemiological outbreaks by focusing on the best-adapted human Mtb lineages. We further explore the rationale for differential identification of Mtb strains for more effective control of TB in clinical and laboratory settings by scrutinizing current diagnostic methods.

Evaluation of the RT-LAMP and LAMP methods for detection of Mycobacterium tuberculosis

BACKGROUND

The current methods for detecting Mycobacterium tuberculosis (Mtb) are not clinically optimal. Standard culture methods (SCMs) are slow, costly, or unreliable, and loop-mediated isothermal amplification (LAMP) cannot differentiate live Mtb.

METHODS

This study compared reverse transcription (RT)-LAMP, LAMP, and an SCM for detecting Mtb. A first experiment tested the sensitivity and specificity of primers for 9 species of Mycobacterium (H37Rv, M. intracellulare, M. marinum, M. kansasii, M. avium, M. flavescens, M. smegmatis, M. fortuitum, and M. chelonae); and 3 non-Mycobacterium species (Staphylococcus aureus, Pseudomonas aeruginosa, and Klebsiella pneumoniae). A second experiment tested sputum specimens for the presence of Mtb, from 100 patients with tuberculosis (clinical) and 22 from patients without tuberculosis (control), using Roche solid culture (SCM), LAMP, and RT-LAMP. In the clinical samples.

RESULTS

The rates of positivity for Mtb of the SCM, LAMP, and RT-LAMP methods were 88%, 92%, and 100%, respectively. The difference in detection rate was significant between RT-LAMP and SCM, but RT-LAMP and LAMP were comparable. In the control group, the detection rates were nil for all three methods.

CONCLUSION

The specificities of the methods were similar. The sensitivity of RT-LAMP was ~10-fold higher than that of LAMP for detecting Mtb. Unlike LAMP, RT-LAMP could identify viable bacteria, and was able to detect a single copy of Mtb. Among SCM, LAMP, and RT-LAMP, the latter is the most suitable for wide use in the lower-level hospitals and clinics of China for detecting Mtb in sputum samples.