Quality control of individual components used in Middlebrook 7H10 medium for mycobacterial susceptibility testing

Comparative study of Mycobacterium bovis primary isolation methods

For the definitive diagnosis of bovine tuberculosis, isolation of the etiologic agent is required. However, there is no consensus on the best methodology for isolation of Mycobacterium bovis in Brazil. This study evaluated the most used decontaminants and culture media in the country, in order to identify the best combination for the Brazilian samples. Three decontaminants – 2% sodium hydroxide (w/v), 0.75% hexadecylpiridinium chloride (w/v) and 5% sulphuric acid (v/v) and four culture media – 7H11 Middlebrook with additives and OADC supplement “A” (7H11 A), the same media with another supplement trademark (7H11 B), tuberculosis blood agar (B83) and Stonebrink's medium were compared. Regarding the isolation, there were no significant differences between the decontaminants and media combinations, except 7H11A combined to any decontaminant. However, the mean colonies score was significantly greater when the samples were decontaminated with 5% sulphuric acid and inoculated in 7H11 B or SB, without significant difference between them, although colonies appeared earlier on 7H11B than on SB. The trademark of OADC supplement influenced the isolation rate and the number of isolated colonies in Middlebrook 7H11. An incubation time of four weeks was required to detect all positive samples in 7H11 B after decontamination with 5% sulphuric acid but there was an increase in the number of colonies until the sixth week of incubation. Overall, the best strategy for the primary isolation of M. bovis from Brazilian samples was the decontamination with 5% sulphuric acid (final concentration) and inoculation in Middlebrook 7H11 medium formulated with OADC supplement “B”.

Comparison of the in vitro activities of rifapentine and rifampicin against Mycobacterium tuberculosis complex

The in vitro activity of rifapentine for 44 clinical isolates of Mycobacterium tuberculosis complex was compared with that of rifampicin using the Bactec radiometric method and the absolute concentration method for susceptibility testing. Twenty-nine M. tuberculosis, 11 Mycobacterium bovis and four Mycobacterium africanum strains were studied. Control tests showed that rifapentine was stable for 14 days in 7H9 broth and for 3 weeks in 7H10 agar medium. The 44 M. tuberculosis complex strains were more susceptible to rifapentine than to rifampicin, irrespective of the testing method. In the radiometric system, the MIC50 and MIC90 of rifapentine for M. tuberculosis complex strains were one or two two-fold dilutions lower than those of rifampicin (0.06-0.125 mg/L versus 0.25 mg/L, respectively). By the absolute concentration method, the MIC50 and MIC90 of rifapentine for M. tuberculosis complex strains were two two-fold dilutions lower than those of rifampicin (0.125-0.25 mg/L versus 0.5-1 mg/L, respectively). The MIC90 of rifapentine for the 44 M. tuberculosis complex strains was always 0.25 mg/L, irrespective of the method used, but the radiometric method was more reliable and more reproducible than the agar 7H10 method.

Phenotypic characterization of pncA mutants of Mycobacterium tuberculosis

We examined the correlation of mutations in the pyrazinamidase (PZase) gene (pncA) with the pyrazinamide (PZA) resistance phenotype with 60 Mycobacterium tuberculosis isolates. PZase activity was determined by the method of Wayne (L. G. Wayne, Am. Rev. Respir. Dis. 109:147-151, 1974), and the entire pncA nucleotide sequence, including the 74 bp upstream of the start codon, was determined. PZA susceptibility testing was performed by the method of proportions on modified Middlebrook and Cohn 7H10 medium. The PZA MICs were > or =100 microg/ml for 37 isolates, 34 of which had alterations in the pncA gene. These mutations included missense substitutions for 24 isolates, nonsense substitutions for 3 isolates, frameshifts by deletion for 4 isolates, a three-codon insertion for 1 isolate, and putative regulatory mutations for 2 isolates. Among 21 isolates for which PZA MICs were <100 microg/ml, 3 had the same mutation (Thr47-->Ala) and 18 had the wild-type sequence. For the three Thr47-->Ala mutants PZA MICs were 12.5 microg/ml by the method of proportions on 7H10 agar; two of these were resistant to 100 microg of PZA per ml and the third was resistant to 800 microg of PZA per ml by the BACTEC method. In all, 30 different pncA mutations were found among the 37 pncA mutants. No PZase activity was detected in 35 of 37 strains that were resistant to > or =100 microg of PZA per ml or in 34 of 37 pncA mutants. Reduced PZase activity was found in the three mutants with the Thr47-->Ala mutation. This study demonstrates that mutations in the pncA gene may serve as a reliable indicator of resistance to > or =100 microg of PZA per ml.

Improved rapid identification of mycobacteria by combining solid-phase extraction with high-performance liquid chromatography analysis of BACTEC cultures

Identification of mycobacteria from BACTEC 12B cultures is achieved in 7 to 21 days by reverse-phase high-performance liquid chromatography (HPLC) using a UV spectrophotometer to detect nonpolar p-bromophenylacyl mycolic acid derivatives. However, cultures grown in BACTEC and other liquid media seldom contain sufficient mycolic acids to permit reliable identification under usual HPLC assay conditions, so the sample size must be increased. Unfortunately, samples prepared from cultures in liquid media such as BACTEC cultures also contain large amounts of extraneous polar and strongly nonpolar contaminants that interfere with the analysis and hasten deterioration of the HPLC column. The contaminants were removed from 10 samples simultaneously by solid-phase extraction (SPE), i.e., by passing the crude suspension containing the mycolic acid derivatives into disposable 500-mg tC18 SPE columns in place of the usual final filtration step used to prepare specimens for HPLC. Fifteen milliliters of 20% (vol/vol) dichloromethane in methanol was passed through the columns (< 3 ml/min) to wash through the undesired contaminants and bind the mycolic acid derivatives. The mycolates were quantitatively eluted in 3 ml of dichloromethane for analysis by HPLC. Treating a panel of 31 strains of frequently isolated mycobacteria by SPE reduced the content of contaminants by 89.3 to 99.9% without altering the chromatographic patterns compared with the same strains grown on conventional solid media and processed without SPE. Peak heights of mycolates prepared from BACTEC cultures were increased from < or = 6 to > or = 25 absorbance milliunits with SPE, sufficient for reliable interpretation by visual inspection of chromatograms obtained with a UV detector. Also, removal of the contaminants improved column longevity.

Antimycobacterial susceptibility testing: present practices and future trends

Along with the worldwide renewed interest in tuberculosis, the high incidence of non-tuberculous disease in HIV-infected patients and the continuing problem of disease caused by rapidly growing mycobacteria, there has been a renewed interest in mycobacterial susceptibility testing. This renewed interest stems from the needs both to provide accurate, reliable and timely susceptibility test information for the management of patients infected with these mycobacteria and to identify new and more effective antimycobacterial agents. Indeed, many new agents have already been identified and are currently used to treat these infections, but the conventional susceptibility testing methods, in many instances, have not been adequately evaluated for these new agents. Perhaps the time has come to give consideration to abandoning such time-honored practices and criteria as the proportion method, the 99% threshold, and "critical concentrations". New methods of susceptibility testing are in various stages of development and many of these methods have advantages and improvements over the existing methods. There is an increased understanding of the pathobiology of mycobacterial infections and an increased understanding of the pharmacokinetics of antimycobacterial agents and the mechanisms of action and resistance. This article gives an overview of the present practices and an assessment of the current needs and potential for the near future of antimycobacterial susceptibility testing.

Stability of antimycobacterial drugs in susceptibility testing

Aqueous solutions of 0.02% isoniazid, 0.2% streptomycin, 0.2% para-aminosalicylate, and 0.5% ethambutol and ethylene glycol solutions of 0.5% ethionamide stored at 3 to 7 degrees C remained stable for 1 year, as did aqueous solutions of 0.05% ethionamide hydrochloride, 0.05% kanamycin, 0.05% viomycin, and 0.1% capreomycin stored at -20 degrees C. The ethambutol and capreomycin solutions were tested by microbiologic methods; the other solutions were tested by both spectrophotometric and microbiologic methods. Prepared susceptibility testing media made with cycloserine, rifampin, and the above solutions incorporated into Middlebrook 7H10 medium showed acceptable stability when stored at 3 to 7 degrees C for 1 month. During incubation of the test medium at 37 degrees C, approximately half of the activity of isoniazid, ethionamide, ethambutol, cycloserine, and rifampin was lost after periods ranging from 2 to 4 days for ethambutol to 2 weeks for rifampin.

Modified method for testing the quality of albumin-containing enrichments used in growth media for mycobacteria

Many commercially available media for cultivation of mycobacteria have failed to support the growth of these organisms. This is especially true of media prepared with albumin-containing enrichments. Earlier, we developed a method for rapid identification of good albumin enrichments for agar-based media used to test the susceptibility of tubercle bacilli to pyrazinamide. The method was modified to make testing of the acceptability of albumin enrichments for primary isolation media for mycobacteria possible. We describe here a simple turbidimetric test using a specific Bacillus subtilis strain to assay quickly (24 h) different lots of albumin-containing enrichments that may be used in the preparation of growth media for mycobacteria.