Degradation of high-strength acrylic acid wastewater with anaerobic granulation technology: A mini-review

The anaerobic granulation technology has been successfully applied full-scale for treating high-strength recalcitrant acrylic acid wastewater. This mini-review highlighted the recalcitrance of acrylic acid and its biological degradation pathways. And then, the full-scale practices using anaerobic granulation technology for acrylic wastewater treatment were outlined. The granules are proposed to provide barriers for high-concentration acrylic acid to the embedded anaerobic microbes, maintaining its high degradation rate without apparent substrate inhibition. Based on this proposal, the prospects of applying anaerobic granulation technology to handle a wide range of high-strength recalcitrant wastewaters, to improve the current process performances, and to recover renewable resources were delineated. The anaerobic granulation for high-strength recalcitrant wastewater treatment is an emergent technology that can assist in fulfilling the appeals of the circular bioeconomy of modern society.

Degradation of Nitriles by Mixed Biofilms of Nitrile-Hydrolyzing Bacteria in Submerged Packed-Bed Reactor

Degradation of nitriles by mixed biofilms of nitrile-hydrolyzing bacteria Alcaligenes faecalis 2 and Rhodococcus ruber gt 1 grown on basalt and carbon carriers, in a submerged packed-bed reactor was studied. It was shown the formation of a massive mixed biofilm of Al. faecalis 2 and R. ruber gt 1 and the effective removal of nitriles and products of their degradation from the reaction medium. After the accumulation of carboxylic acid and some of the unprocessed substrate, the system adapts to 600-1000 h of biofilter operation, which is expressed in a decrease in the content of substrate and reaction products in the medium. The rate of acetonitrile and acrylonitrile utilization was 0.072-0.086 and 0.039-0.215 g/h, respectively, and acrylonitrile utilization with maximum rate was realized by a mixed biofilm on carbon fibers. Biofilms grown on mixed fibers in a "sandwich"-type reactor had the best characteristics for the transformation of aceto- and acrylonitrile (removal capacity of 99.6-99.9%, nitrile utilization rate of 0.080-0.095 g/h). Biofilms grown on basalt fiber with a diameter of 4-12 μm are also well suited for the degradation of acetonitrile (removal capacity of 100%, nitrile utilization rate of 0.086 g/h). The results of metagenomic analysis showed the resistance of Al. faecalis 2 and R. ruber gt 1 mixed biofilms against leaching from a biofilter and to competitive growth in an open system, indicating the advantages of biofilms over homogeneous biomass for wastewater treatment from nitrile compounds. Biofilms of two species of nitrile hydrolyzing bacteria on basalt and carbon fibers effectively purify water from nitriles in a submerged packed-bed reactor.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12088-022-01030-z.

Current status on the biodegradability of acrylic polymers: microorganisms, enzymes and metabolic pathways involved

Abstract

Acrylic polymers (AP) are a diverse group of materials with broad applications, frequent use, and increasing demand. Some of the most used AP are polyacrylamide, polyacrylic acid, polymethyl methacrylates, and polyacrylonitrile. Although no information for the production of all AP types is published, data for the most used AP is around 9 MT/year, which gives an idea of the amount of waste that can be generated after products’ lifecycles. After its lifecycle ends, the fate of an AP product will depend on its chemical structure, the environmental setting where it was used, and the regulations for plastic waste management existing in the different countries. Even though recycling is the best fate for plastic polymer wastes, few AP can be recycled, and most of them end up in landfills. Because of the pollution crisis the planet is immersed, setting regulations and developing technological strategies for plastic waste management are urgent. In this regard, biotechnological approaches, where microbial activity is involved, could be attractive eco-friendly strategies. This mini-review describes the broad AP diversity, their properties and uses, and the factors affecting their biodegradability, underlining the importance of standardizing biodegradation quantification techniques. We also describe the enzymes and metabolic pathways that microorganisms display to attack AP chemical structure and predict some biochemical reactions that could account for quaternary carbon-containing AP biodegradation. Finally, we analyze strategies to increase AP biodegradability and stress the need for more studies on AP biodegradation and developing stricter legislation for AP use and waste control.

Key points

• Acrylic polymers (AP) are a diverse and extensively used group of compounds.

• The environmental fates and health effects of AP waste are not completely known.

• Microorganisms and enzymes involved in AP degradation have been identified.

• More biodegradation studies are needed to develop AP biotechnological treatments.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00253-020-11073-1.

Influence of Acrylamide on Energy Status and Survival of Bacteria of Different Systematic Groups

We studied the effect of acrylamide on the content of intracellular ATP in the cells of bacteria of the genera Rhodococcus and Alcaligenes, the luminescence of the genetically engineered strain Escherichia coli K12 TG1 (pXen7), and the survival of bacteria of various systematic groups. According to the level of decrease in the concentration of intracellular ATP, it was found that the strain with lower amidase activity (R. erythropolis 6-21) and Gram-negative proteobacteria A. faecalis 2 were the most sensitive to acrylamide after a 20-min exposure, while the strain R. ruber gt 1 was stable, having a high nitrile hydratase activity in combination with a low amidase activity. EC50 of acrylamide for 2 h was 7.1 g/L for E. coli K12 TG1 (pXen7). Acrylamide at a concentration of 10-20 mM added to the culture medium led to a slight decrease in the number of CFUs of Rhodococcus, A. faecalis 2, and E. coli compared to the control. At an acrylamide concentration of 250 mM, from 0.016 to 0.116% of viable bacterial cells remained, and a solution of 500 mM and higher inhibited the growth of the majority of the studied strains. The results confirm that acrylamide is much less toxic to prokaryotes than to eukaryotes.