Design of lactoferrin functionalized carboxymethyl dextran coated egg albumin nanoconjugate for targeted delivery of capsaicin: Spectroscopic and cytotoxicity studies

The increased mortality rates associated with colorectal cancer highlight the pressing need for improving treatment approaches. While capsaicin (CAP) has shown promising anticancer activity, its efficacy is hampered due to low solubility, rapid metabolism, suboptimal bioavailability, and a short half-life. Therefore, this study aimed to prepare a lactoferrin-functionalized carboxymethyl dextran-coated egg albumin nanoconjugate (LF-CMD@CAP-EGA-NCs) for the targeted CAP delivery to enhance its potential for colorectal cancer therapy. Briefly, LF-CMD was synthesized through an esterification reaction involving LF as a receptor and CMD as a shell. Concurrently, CAP was incorporated into an EGA carrier using gelation and hydrophobic interactions. The subsequent production of LF-CMD@CAP-EGA-NCs was achieved through the Maillard reaction. Spectral characterizations confirmed the successful synthesis of smooth and spherical-shaped LF-CMD@CAP-EGA-NCs using LF-CMD and EGA-CAP nanoparticles, with high entrapment efficiency and satisfactory drug content. Furthermore, LF-CMD@CAP-EGA-NCs demonstrated a sustained release of CAP (76.52 ± 1.01 % in 24 h, R2 = 0.9966) in pH 5.8 buffer with anomalous transport (n = 0.68) owing to the shell of the CMD and EGA matrix. The nanoconjugate exhibited enhanced cytotoxicity in HCT116 and LoVo cell lines, which is attributed to the overexpression of LF receptors in colorectal HCT116 cells. Additionally, LF-CMD@CAP-EGA-NCs demonstrated excellent biocompatibility, as observed in the FHC-CRL-1831 cell line. In conclusion, LF-CMD@CAP-EGA-NCs can be considered as a promising approach for targeted delivery of CAP and other anticancer agents in colorectal cancer treatment.

Elaboration of Nanostructured Levan-Based Colloid System as a Biological Alternative with Antimicrobial Activity for Applications in the Management of Pathogenic Microorganisms

Considering the documented health benefits of bacterial exopolysaccharides (EPSs), specifically of bacterial levan (BL), including its intrinsic antimicrobial activity against certain pathogenic species, the current study concentrated on the development of active pharmaceutical ingredients (APIs) in the form of colloid systems (CoSs) containing silver nanoparticles (AgNPs) employing in-house biosynthesized BL as a reducing and capping agent. The established protocol of fermentation conditions implicating two species of lactic acid bacteria (LAB), i.e., Streptococcus salivarius K12 and Leuconostoc mesenteroides DSM 20343, ensured a yield of up to 25.7 and 13.7 g L-1 of BL within 72 h, respectively. An analytical approach accomplished by Fourier-transform infrared (FT-IR) spectroscopy allowed for the verification of structural features attributed to biosynthesized BL. Furthermore, scanning electron microscopy (SEM) revealed the crystalline morphology of biosynthesized BL with a smooth and glossy surface and highly porous structure. Molecular weight (Mw) estimated by multi-detector size-exclusion chromatography (SEC) indicated that BL biosynthesized using S. salivarius K12 has an impressively high Mw, corresponding to 15.435 × 104 kilodaltons (kDa). In turn, BL isolated from L. mesenteroides DSM 20343 was found to have an Mw of only 26.6 kDa. Polydispersity index estimation (PD = Mw/Mn) of produced BL displayed a monodispersed molecule isolated from S. salivarius K12, corresponding to 1.08, while this was 2.17 for L. mesenteroides DSM 20343 isolate. The presence of fructose as the main backbone and, to a lesser extent, glucose and galactose as side chain molecules in EPS hydrolysates was supported by HPLC-RID detection. In producing CoS-BL@AgNPs within green biosynthesis, the presence of nanostructured objects with a size distribution from 12.67 ± 5.56 nm to 46.97 ± 20.23 was confirmed by SEM and energy-dispersive X-ray spectroscopy (EDX). The prominent inhibitory potency of elaborated CoS-BL@AgNPs against both reference test cultures, i.e., Pseudomonas aeruginosa, Escherichia coli, Enterobacter aerogenes, and Staphylococcus aureus and those of clinical origin with multi-drug resistance (MDR), was confirmed by disc and well diffusion tests and supported by the values of the minimum inhibitory and bactericidal concentrations. CoS-BL@AgNPs can be treated as APIs suitable for designing new antimicrobial agents and modifying therapies in controlling MDR pathogens.

Chitosan-Dextran-Glycerol Hydrogels Loaded with Iron Oxide Nanoparticles for Wound Dressing Applications

Natural polymers have shown tremendous potential towards the development of hydrogels with tissue regeneration properties. Among them, chitosan and dextran are polysaccharides widely applied in the wound dressing area owing to their mucoadhesiveness, biodegradability, hemostatic potential, and intrinsic antibacterial activity, while glycerol is a well-known biocompatible solvent extensively used in the manufacture of cosmetic, pharmaceutical, medical, and personal care products. In order to enhance the properties of natural polymer-based hydrogels, the focus has currently shifted towards the addition of nanomaterials with antibacterial and regenerative potential, i.e., iron oxide nanoparticles. Thus, the aim of the present study was to develop a series of chitosan-dextran-glycerol hydrogels loaded with iron oxide nanoparticles, either readily added or formed in situ. The physicochemical properties of the so obtained hydrogels demonstrated an improved dispersibility of the in situ formed magnetite nanoparticles, which further decreases the porosity and swelling ratio of the hydrogels but increases the antimicrobial properties. Additionally, the presence of glycerol enhances the cell viability but reduces the antimicrobial potential. In this context, the results proved promising biological and antimicrobial properties, thus confirming their potential as biomaterials for wound healing and regeneration.

Structural, thermal, electronic, vibrational, magnetic, and cytotoxic properties of chloro(glycinato-N,O)(1,10-phenanthroline-N,N')‑copper(II) trihydrate coordination complex

Chloro(glycinato-N,O)(1,10-phenanthroline-N,N')‑copper(II) trihydrate complex was synthesized through the slow evaporation method. The crystal's structural, thermal, magnetic, and vibrational properties were obtained by X-ray powder diffraction (XRPD), thermal analyses, magnetization, Raman, and Fourier-transform infrared (FT-IR) spectroscopy. XRPD results showed that the crystalline complex belongs to a monoclinic system (P2₁/n). Thermal analyses revealed that around 333 K, the material undergoes a thermodynamically irreversible process. Magnetic data showed a paramagnetic behavior with weak ferromagnetic interactions. Moreover, all the Raman- and infrared-active bands were assigned from computational calculations based on the density functional theory (DFT) to analyze intra-molecular vibrational modes. In addition, the cytotoxic assay on colorectal cancer cells was performed to evaluate the antitumor activity of this ternary compound. Therefore, the antineoplastic activity of [Cu(1,10-phenanthroline)(glycine)Cl]•3H₂O complex in HCT-116 cells was confirmed, showing a potent cytotoxic effect.

A multi-in-one strategy with glucose-triggered long-term antithrombogenicity and sequentially enhanced endothelialization for biological valve leaflets

Bioprosthetic heart valves are commonly applied in heart valve replacement, while the effectiveness is limited by inflammation, calcification and especially thrombosis. Surface modification is expected to endow the biological valves with versatility. Herein, a multi-in-one strategy was established to modify biological valves with long-term antithrombogenicity and sequentially enhanced endothelialization triggered by glucose, in which the direct thrombin inhibitor rivaroxaban (RIVA)-loaded nanogels were embedded and the detachable polyethylene glycol (PEG) was grafted. These two anticoagulant strategies were connected by glucose oxidase (GOx), which catalyzed the oxidation of glucose to produce hydrogen peroxide (H₂O₂) and local acidic environment. The generated H₂O₂ stimulated H₂O₂-responsive nanogels release RIVA to obtain continuous antithrombogenicity. Meanwhile, PEG was attached to the surface via pH-sensitive bonds, which prevented thrombus formation by resisting the serum proteins and platelets adhesion at the initial stage of material/blood contact. Sequentially, PEG gradually peeled off under the local weak acidic environment, which ultimately resulted in the endothelialization enhancement. Within such multi-in-one strategy, the biological valve leaflets induced long-term anticoagulant performance, gradually enhanced endothelialization and improved tissue affinity, including anti-calcification and anti-inflammation, indicating the potential of the response sequence matching between materials and tissues after implantation, which might improve performance of biological heart valves.

Immobilization of alcohol dehydrogenase from Saccharomyces cerevisiae onto carboxymethyl dextran-coated magnetic nanoparticles: a novel route for biocatalyst improvement via epoxy activation

A novel method is described for the immobilization of alcohol dehydrogenase (ADH) from Saccharomyces cerevisiae onto carboxymethyl dextran (CMD) coated magnetic nanoparticles (CMD-MNPs) activated with epoxy groups, using epichlorohydrin (EClH). EClH was used as an activating agent to bind ADH molecules on the surface of CMD-MNPs. Optimal immobilization conditions (activating agent concentration, temperature, rotation speed, medium pH, immobilization time and enzyme concentration) were set to obtain the highest expressed activity of the immobilized enzyme. ADH that was immobilized onto epoxy-activated CMD-MNPs (ADH-CMD-MNPs) maintained 90% of the expressed activity. Thermal stability of ADH-CMD-MNPS after 24 h at 20 °C and 40 °C yielded 79% and 80% of initial activity, respectively, while soluble enzyme activity was only 19% at 20 °C and the enzyme was non-active at 40 °C. Expressed activity of ADH-CMD-MNPs after 21 days of storage at 4 °C was 75%. Kinetic parameters (K_M, v_max) of soluble and immobilized ADH were determined, resulting in 125 mM and 1.2 µmol/min for soluble ADH, and in 73 mM and 4.7 µmol/min for immobilized ADH.

Dextran-Thyme Magnesium-Doped Hydroxyapatite Composite Antimicrobial Coatings

The dextran-thyme magnesium-doped hydroxyapatite (10MgHAp-Dex-thyme) composite layers were prepared by a dip-coating procedure from stable suspensions and further analyzed for the first time. Different characterization techniques were employed to explore the physical-chemical features of the 10MgHAp-Dex-thyme suspensions and derived coatings. Information regarding the 10MgHAp-Dex-thyme suspensions was extracted on the basis of dynamic light scattering, zeta potential, and ultrasound measurements. The crystalline quality of the biocomposite powders—resulting after the centrifugation of suspensions—and the layers deposited on glass was assessed by X-ray diffraction in symmetric and grazing incidence geometries, respectively. The chemical structure and presence of functional groups were evaluated for both powder and coating by Fourier transform infrared spectroscopy in attenuated total reflectance mode. The extent of the antimicrobial effect range of the biocomposite suspensions and coatings was tested against different Gram-positive and Gram-negative bacteria (Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, and Pseudomonas aeruginosa) and fungus (Candida albicans) strains with promising results.

The application of nanomaterial science in the formulation a novel antibiotic: Assessment of the antifungal properties of mucoadhesive clotrimazole loaded nanofiber versus vaginal films

Candidiasis is the origin of several chronic diseases and causes a wide range of symptoms from mucosal to systemic and deadly infections. Vaginal patches are one of the best drug delivery systems for the treatment of fungal infections in the vaginal environment, so a mucoadhesive film containing drugs such as clotrimazole and metronidazole is commercially available for patients. In the present study, a physicochemical comparison is made between clotrimazole loaded film and nanofiber fabricated with the new hybrid mucoadhesive formulation of dextran and alginate. Toxicity testing was performed using the MTT assay. Bioadhesion and antifungal effects were investigated for fibers and films. The release behavior of clotrimazole from two systems was evaluated by Franz cell in each case. The most important difference between nanofibrous and film mats were obtained in antifungal, mucoadhesive, Young's modulus and morphology. The nanofiber has a higher antifungal effect and two-fold adhesive to the mouse tissue, than film. The inherent flexibility of nanofiber obviated the need for a plasticizer, which may have cytotoxic side effects. The Clotrimazole loaded nanofibrous of Alginate/Dextran mats were successfully electrospun. They exhibited more bioadhesive with higher and faster antifungal properties versus similar formulation film. Further in vivo investigation is required for their application in vaginal candidiasis.