Hybrid protein microspheres and their responsive release behaviors and inhibitory effects on melanin synthesis

In this study, the formation of protein microspheres through lysosomal enzyme-assisted biomineralized crystallization was demonstrated. Spherical micro-sized hybrid CaCO3 constructs were synthesized and characterized using field-emission scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and particle size analysis. Additionally, parameters such as the Brunauer-Emmett-Teller surface area and single-point total pore volume, and adsorption/desorption analysis were used to investigate the mesoporous properties, which are advantageous for lysosomal enzyme (LE) loading. A LE can be used as an organic template, not only as a morphological controller but also for entrapping LE during the crystallization pathway. The hybrid protein microspheres accommodated 2.3 mg of LE with a 57% encapsulation efficiency and 5.1 wt% loading. The peroxidase activity of the microspheres was calculated and found to be approximately 0.0238 mM-1 min-1. pH-responsive release of the LE from CaCO3 was observed, suggesting potential biomedical and cosmetic applications in acidic environments. The hybrid LE microsphere treatment significantly alleviated melanin production in a dose-dependent manner and further downregulated the mRNA expression of MITF, tyrosinase, TYRP-1, and TYRP-2. These results indicate skin-whitening effects by inhibiting melanin without inducing cytotoxicity. The data provide the first evidence of the potential use of a LE for obtaining hybrid minerals and the effectiveness of biomineralization-based sustainable delivery of enzyme-based vehicles based on organelle-extract-assisted biomineralization.

Inter-protein interactions govern protein loading into porous vaterite CaCO3 crystals

Loading of therapeutic proteins into mesoporous vaterite crystals is driven by inter-protein interactions in bulk solution and inside the crystals.

Interpolyelectrolyte complexes: advances and prospects of application

Advances in the development of water-soluble nonstoichiometric polyelectrolyte complexes, which are characterized by high stability and can be involved in competitive interpolyelectrolyte reactions, are summarized and analyzed. The complexes remain stable over a wide range of external conditions (pH, ionic strength, temperature), but show a rapid, reversible and highly sensitive response to environmental changes outside this range by changing the phase state. The review considers methods of preparation and properties of nonstoichiometric polyelectrolyte complexes formed by interactions between oppositely charged polyelectrolytes. These reagents can be used for controlled modification of various surfaces, the preparation of soluble complexes functionalized by different molecules, the suppression and prevention of protein aggregation. The review briefly summarizes new types of soluble polyelectrolytes and polyelectrolyte complexes of different nature and with different structures, including biopolymers and dendrimers, suitable for solving problems in medicine and agricultural biotechnology. In order to evaluate the results achieved, there is a need to integrate and analyze the data on interpolyelectrolyte reactions, which are of most interest for a wide range of researchers.

The bibliography includes 118 references.

Mucin adsorption on vaterite CaCO3 microcrystals for the prediction of mucoadhesive properties

Porous vaterite CaCO₃ crystals are widely used as containers for drug loading and as sacrificial templates to assemble polymer-based nano- and micro-particles at mild conditions. Special attention is paid nowadays to mucosal delivery where the glycoprotein mucin plays a crucial role as a main component of a mucous. In this work mucoadhesive properties of vaterite crystals have been tested by investigation of mucin binding to the crystals as a function of (i) time, (ii) glycoprotein concentration, (iii) adsorption conditions and (iv) degree of mucin desialization. Mucin adsorption follows Bangham equation indicating that diffusion into crystal pores is the rate-limiting step. Mucin strongly binds to the crystals (ΔG = -35 ± 4 kJ mol^-1) via electrostatic and hydrophobic interactions forming a gel and thus giving the tremendous mucin mass content in the crystals of up to 16%. Despite strong intermolecular mucin-mucin interactions, pure mucin spheres formed after crystal dissolution are unstable. However, introduction of protamine, actively used for mucosal delivery, makes the spheres stable via additional electrostatic bonding. The results of this work indicate that the vaterite crystals are extremely promising carriers for mucosal drug delivery and for development of test-systems for the analysis of the mucoadhesion.

Self-Assembled Mucin-Containing Microcarriers via Hard Templating on CaCO₃ Crystals

Porous vaterite crystals of CaCO₃ are extensively used for the fabrication of self-assembled polymer-based microparticles (capsules, beads, etc.) utilized for drug delivery and controlled release. The nature of the polymer used plays a crucial role and discovery of new perspective biopolymers is essential to assemble microparticles with desired characteristics, such as biocompatibility, drug loading efficiency/capacity, release rate, and stability. Glycoprotein mucin is tested here as a good candidate to assemble the microparticles because of high charge due to sialic acids, mucoadhesive properties, and a tendency to self-assemble, forming gels. Mucin loading into the crystals via co-synthesis is twice as effective as via adsorption into preformed crystals. Desialylated mucin has weaker binding to the crystals most probably due to electrostatic interactions between sialic acids and calcium ions on the crystal surface. Improved loading of low-molecular-weight inhibitor aprotinin into the mucin-containing crystals is demonstrated. Multilayer capsules (mucin/protamine)₃ have been made by the layer-by-layer self-assembly. Interestingly, the deposition of single mucin layers (mucin/water)₃ has also been proven, however, the capsules were unstable, most probably due to additional (to hydrogen bonding) electrostatic interactions in the case of the two polymers used. Finally, approaches to load biologically-active compounds (BACs) into the mucin-containing microparticles are discussed.

The mechanism of catalase loading into porous vaterite CaCO3 crystals by co-synthesis

The mechanism of catalase loading into vaterite CaCO₃ crystals through co-synthesis is deciphered showing the crucial role of Ca²⁺-induced catalase aggregation.

Sonication-Assisted Layer-by-Layer Assembly for Low Solubility Drug Nanoformulation

Sonication-assisted layer-by-layer (LbL) self-assembly is a nanoencapsulation technique based on the alternate adsorption of oppositely charged polyelectrolytes, enabling the encapsulation of low solubility drugs. In this work, a top-down LbL technique was performed using a washless approach and ibuprofen (IBF) as a model class II drug. For each saturated layer deposition, polyelectrolyte concentration was determined by titration curves. The first layer was constituted by cationic poly(allylamine hydrochloride) (PAH), given the IBF negative surface charge, followed by anionic polystyrenesulfonate (PSS). This polyelectrolyte sequence was made up with 2.5, 5.5, and 7.5 bilayer nanoshells. IBF nanoparticles (NPs) coated with 7.5 bilayers of PAH/PSS showed 127.5 ± 38.0 nm of particle size, a PDI of 0.24, and a high zeta potential (+32.7 ± 0.6 mV), allowing for a stable aqueous nanocolloid of the drug. IBF entrapment efficiency of 72.1 ± 5.8% was determined by HPLC quantification. In vitro MTT assay showed that LbL NPs were biocompatible. According to the number of coating layers, a controlled release of IBF from LbL NPs was achieved under simulated intestinal conditions (from 5 h up to 7 days). PAH/PSS-LbL NPs constitute a potential delivery system to improve biopharmaceutical parameters of water low solubility drugs.

Protein loading into porous CaCO3 microspheres: adsorption equilibrium and bioactivity retention

Formulation of proteins into particulate form is a principal strategy to achieve controlled and targeted delivery, as well as to protect fragile protein molecules. Control over size, mechanical properties, and surface area (porosity) of particulate proteins has been successfully achieved by hard templating under mild conditions using porous CaCO3 microspheres. A crucial step in this approach, which determines protein content, is the loading of proteins into the CaCO3 microspheres. In this study, the adsorption of different proteins into the microspheres has been investigated. Proteins differing in characteristics such as molecular weight and charge have been employed: catalase (Cat), insulin (Ins), aprotinin (Apr), and protamine (Pro). Thermodynamics of adsorption equilibria have been studied, together with quantitative and qualitative analysis of protein loading and distribution in the microspheres. Protein interaction with the CaCO3 microspheres is not limited by the diffusion of protein molecules (protein dimensions are significantly smaller than microsphere pores) but is determined by the protein affinity for the microsphere surface. Cat and Ins bind much more strongly to the microspheres than Apr and Pro, which can be explained by electrostatic attractive forces. Protein binding/release and protein biological activity have been investigated as a function of pH. It is shown that pH variation during the adsorption process plays a principal role and defines not only the amount of protein adsorbed/released but also protein biological activity. Protein adsorption and microsphere elimination (by EDTA) do not affect protein bioactivity. In addition to applications for protein particle/capsule formulations, the findings of this study might help in understanding protein interactions with carbonate minerals such as calcium carbonate, which is used as a natural material for multiple applications.

Encapsulation of albumin in self-assembled layer-by-layer microcapsules: comparison of co-precipitation and adsorption techniques

OBJECTIVE

The objective of this study is to prepare and characterize polymeric self-assembled layer-by-layer microcapsules (LbL-MC) to deliver a model protein, bovine serum albumin (BSA). The aim is to compare the BSA encapsulation in LbL-MC using co-precipitation and adsorption methods.

MATERIALS AND METHODS

In co-precipitation method, BSA was co-precipitated with growing calcium carbonate particles to form a core template. Later, poly(styrene sulfonate) and poly(allylamine hydrochloride) were sequentially adsorbed onto the CaCO3 templates. In adsorption method, preformed LbL-MC were incubated with BSA and encapsulation efficiency is optimized for pH and salt concentration. Free and BSA-encapsulated LbL-MC were characterized using Zetasizer, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy and differential scanning calorimeter. Later, in vitro release studies were performed using dialysis membrane method at pH 4, 7.4 and 9.

RESULTS AND DISCUSSION

Results from Zetasizer and SEM showed free LbL-MC with an average size and zeta-potential of 2.0 ± 0.6 μm and 8.1 ± 1.9 mV, respectively. Zeta-potential of BSA-loaded LbL-MC was (-)7.4 ± 0.7 mV and (-)5.7 ± 1.0 mV for co-precipitation and adsorption methods, respectively. In adsorption method, BSA encapsulation in LbL-MC was found to be greater at pH 6.0 and 0.2 M NaCl. Co-precipitation method provided four-fold greater encapsulation efficiency (%) of BSA in LbL-MC compared with adsorption method. At pH 4, the BSA release from LbL-MC was extended up to 120 h. Polyacrylamide gel electrophoresis showed that BSA encapsulated in LBL-MC through co-precipitation is stable toward trypsin treatment.

CONCLUSION

In conclusion, co-precipitation method provided greater encapsulation of BSA in LbL-MC. Furthermore, LbL-MC can be developed as carriers for pH-controlled protein delivery.

Multifunctional polyelectrolyte microparticles for oral insulin delivery

Multicomponent insulin-containing microparticles are prepared by layer-by-layer assembly of dextran sulfate and chitosan on the core of protein-polyanion complex with or without protease inhibitors. Oral bioavailability of the encapsulated insulin is improved due to the cumulative effect of each component. A physico-chemical study shows that the particle design allows adjustment of the pH-dependent profile of the insulin release, as well as mucoadhesive properties and Ca(2+) binding ability of the microparticles. Supplementing the microparticles with 2-3% protease inhibitors fully prevents proteolysis of human insulin. The pharmacological effect of microencapsulated insulin in doses 50-100 IU kg(-1) is demonstrated in chronic experiments after oral administration to diabetic rats fed ad libitum.