Membrane stiffening in Chitosan mediated multilamellar vesicles of alkyl ether carboxylates

HYPOTHESIS

Membrane undulations are known to strongly affect the stability of uni- and multilamellar vesicles formed by surfactants or phospholipids. Herein, based on the same arguments, we hypothesise that the properties of polyelectrolyte mediated surfactant multilamellar vesicles, in particular the multiplicity - i.e. the number of layers forming the vesicle - depend on the dynamics of the membrane.

EXPERIMENTS

Small-angle neutron scattering (SANS) and neutron spin-echo (NSE) were used to probe the structure and the dynamics of the multilayered vesicles formed in mixtures of the biopolymer chitosan and oppositely charged alkyl ether carboxylates. The neutron scattering data are complemented by static and dynamic light scattering experiments. Experiments were performed in polyelectrolyte excess conditions, and at a pH close to the pKa of the surfactant.

FINDINGS

The structural investigation shows very clearly that multilayered surfactant/polyelectrolyte vesicles are formed in the investigated mixtures. Only 3 to 5 layers form, on average, one vesicle, as similarly found in mixtures of chitosan and phospholipid vesicles. NSE shows that the surfactant membrane becomes stiffer upon complexation with chitosan, and that the fluctuation of the layers is strongly coupled in time and space. Such strong coupling and the increase in overall stiffness is associated with a high entropic cost. Accordingly, the combined SANS and NSE study points out that the low multiplicity found in multilayered vesicles involving the rigid polysaccharide chitosan arises from the strongly coupled dynamics of the membrane layers.

Transport of Magnetic Polyelectrolyte Capsules in Various Environments

Microcapsules consisting of eleven layers of polyelectrolyte and one layer of iron oxide nanoparticles were fabricated. Two types of nanoparticles were inserted as one of the layers within the microcapsule’s walls: Fe2O3, ferric oxide, having a mean diameter (Ø) of 50 nm and superparamagnetic Fe3O4 having Ø 15 nm. The microcapsules were suspended in liquid environments at a concentration of 108 caps/mL. The suspensions were pumped through a tube over a permanent magnet, and the accumulation within a minute was more than 90% of the initial concentration. The design of the capsules, the amount of iron embedded in the microcapsule, and the viscosity of the transportation fluid had a rather small influence on the accumulation capacity. Magnetic microcapsules have broad applications from cancer treatment to molecular communication.

Molecular features of the interaction and antimicrobial activity of chitosan in a solution containing sodium dodecyl sulfate

Molecular interaction of chitosan with sodium dodecyl sulfate (SDS) is a more complicated process than it has been imagined so far. For the first time it has been shown that the shorter chitosan chains are, the more preferably they interact with the SDS and the larger-in-size microparticles they form. The influence of ionic strength, urea and temperature on microparticles formation allows interpreting the mechanism of microparticles formation as a cooperative electrostatic interaction between SDS and chitosan with simultaneous decrease in the surface charge of the complexes initiating the aggregation of microparticles. It is shown that hydrogen bonding is mainly responsible for the aggregation while hydrophobic interaction has a lesser effect. Chitosan demonstrates a high bacteriostatic activity in the presence of SDS in solution and can be promising for preparation of microbiologically stable pharmaceutical hydrocolloids, cosmetic products and chitosan-based Pickering emulsions containing strong anionic surfactants.

Chitosan-based smart hybrid materials: a physico-chemical perspective

Chitosan is one of the most studied cationic polysaccharides. Due to its unique characteristics of being water soluble, biocompatible, biodegradable, and non-toxic, this macromolecule is highly attractive for a broad range of applications. In addition, its complex behavior and the number of ways it interacts with different components in a system result in an astonishing variety of chitosan-based materials. Herein, we present recent advances in the field of chitosan-based materials from a physico-chemical perspective, with focus on aqueous mixtures with oppositely charged colloids, chitosan-based thin films, and nanocomposite systems. In this review, we focus our attention on the physico-chemical properties of chitosan-based materials, including solubility, mechanical resistance, barrier properties, and thermal behaviour, and provide a link to the chemical peculiarities of chitosan, such as its intrinsic low solubility, high rigidity, large charge separation, and strong tendency to form intra- and inter-molecular hydrogen bonds.

Structural control of polyelectrolyte/microemulsion droplet complexes (PEMECs) with different polyacrylates

The ionic assembly of oppositely charged polyelectrolyte-surfactant complexes (PESCs) is often done with the aim of constructing more functional colloids, for instance as advanced delivery systems. However, PESCs are often not easily loaded with a solubilisate due to intrinsic restrictions of such complexes. This question was addressed from a different starting point: by employing microemulsion droplets as heavily loaded surfactant systems and thereby avoiding potential solubilisation limitations from the beginning. We investigated mixtures of cationic oil-in-water (O/W) microemulsion droplets and oppositely charged sodium polyacrylate (NaPA) and determined structure and phase behaviour as a function of the mixing ratio for different droplet sizes and different M w (NaPA). Around an equimolar charge ratio an extended precipitate region is present, which becomes wider for larger droplets and with increasing M w of the NaPA. Static and dynamic light scattering (SLS and DLS) and small-angle neutron scattering (SANS) show the formation of one-dimensional arrangements of microemulsion droplets for polyelectrolyte excess, which become more elongated with increasing M w (NaPA) and less so with increasing NaPA excess. What is interesting is a marked sensitivity to ionic strength, where already a modest increase to ∼20 mM leads to a dissolution of the complexes. This work shows that polyelectrolyte/microemulsion complexes (PEMECs) are structurally very versatile hybrid systems, combining the high solubilisate loading of microemulsions with the larger-scale structuring induced by the polymer, thereby markedly extending the concept of conventional PESCs. This type of system has not been described before and is highly promising for future applications where high payloads are to be formulated.

Interfacial rheological properties of self-assembling biopolymer microcapsules

Tuning the mechanical properties of microcapsules through a cost-efficient route of fabrication is still a challenge. The traditional method of layer-by-layer assembly of microcapsules allows building a tailored composite multi-layer membrane but is technically complex as it requires numerous steps. The objective of this article is to characterize the interfacial rheological properties of self-assembling biopolymer microcapsules that were obtained in one single facile step. This thorough study provides new insights into the mechanics of these weakly cohesive membranes. Firstly, suspensions of water-in-oil microcapsules were formed in microfluidic junctions by self-assembly of two oppositely charged polyelectrolytes, namely chitosan (water soluble) and phosphatidic fatty acid (oil soluble). In this way, composite membranes of tunable thickness (between 40 and 900 nm measured by AFM) were formed at water/oil interfaces in a single step by changing the composition. Secondly, microcapsules were mechanically characterized by stretching them up to break-up in an extensional flow chamber which extends the relevance and convenience of the hydrodynamic method to weakly cohesive membranes. Finally, we show that the design of microcapsules can be 'engineered' in an extensive way since they present a wealth of interfacial rheological properties in terms of elasticity, plasticity and yield stress whose magnitudes can be controlled by the composition. These behaviors are explained by the variation of the membrane thickness with the physico-chemical parameters of the process.

Co-assembly in chitosan-surfactant mixtures: thermodynamics, structures, interfacial properties and applications

In this review, different aspects characterizing chitosan-surfactant mixtures are summarized and compared. Chitosan is a bioderived cationic polysaccharide that finds wide-ranged applications in various field, e.g., medical or food industry, in which synergistic effects with surfactant can play a fundamental role. In particular, the behavior of chitosan interacting with strong and weak anionic, nonionic as well as cationic surfactants is reviewed. We put a focus on oppositely charged systems, as they exhibit the most interesting features. In that context, we discuss the thermodynamic description of the interaction and in particular the structural changes as they occur as a function of the mixed systems and external parameters. Moreover, peculiar properties of chitosan coated phospholipid vesicles are summarized. Finally, their co-assembly at interfaces is briefly reviewed. Despite the behavior of the mentioned systems might strongly differ, resulting in a high variety of properties, few general rules can be pointed out which improve the understanding of such complex systems.

From crab shells to smart systems: chitosan-alkylethoxy carboxylate complexes

In this work, self-assembly of alkyl ethylene oxide carboxylates and the biopolymer chitosan into supramolecular structures with various shapes is presented. Our investigations were done at pH 4.0, where the chitosan is almost fully charged and the surfactants are partially deprotonated. By changing the alkyl chain length and the number of ethylenoxide units very different water-soluble complexes can be obtained, ranging from globular micelles incorporated in a chitosan network to formation of ordered multiwalled vesicles. The structural characteristics of these complexes can be finely controlled by the mixing ratio of chitosan and surfactant, i.e., simply by the solutions composition. For instance, the vesicle wall thickness can be varied between 5 and 50 nm just by varying the mixing ratio. Accordingly, we expect this system to be an outstanding carrier for hydrophilic compounds with tunable release time option. Moreover, an easy route for preparation of chitosan-based complexes in the solid state with controlled mesoscopic order is presented. This work opens the way to prepare biofriendly materials on the basis of chitosan and mild anionic surfactants which are rather versatile with respect to their structure and properties, allowing for preparation of complexes with highly variable structures in both aqueous and solid phase. Formation of such different structures can be exploited for preparation of carriers, which are able to transport hydrophilic as well as hydrophobic molecules. Furthermore, as chitosan is well known to exhibit antibacterial and anti-inflammatory properties, different applications of these complexes can be indicated, i.e., as drug delivery systems or as coatings for medical implants.

Chitosan/alkylethoxy carboxylates: a surprising variety of structures

In this work, we present a comprehensive structural characterization of long-term stable complexes formed by biopolycation chitosan and oppositely charged nonaoxyethylene oleylether carboxylate. These two components are attractive for many potential applications, with chitosan being a bioderived polymer and the surfactant being ecologically benign and mild. Experiments were performed at different mixing ratios Z (ratio of the nominal charges of surfactant/polyelectrolyte) and different pH values such that the degree of ionization of the surfactant is largely changed whereas that of chitosan is only slightly affected. The structural characterization was performed by combining static and dynamic light scattering (SLS and DLS) and small-angle neutron scattering (SANS) to cover a large structural range. Highly complex behavior is observed, with three generic structures formed that depend on pH and the mixing ratio, namely, (i) a micelle-decorated network at low Z and pH, (ii) rodlike complexes with the presence of aligned micelles at medium Z and pH, and (iii) compacted micellar aggregates forming a supraaggregate surrounded by a chitosan shell at high Z and pH. Accordingly, the state of aggregation in these mixtures can be tuned structurally over quite a range only by rather small changes in pH.

Chitosan/anionic surfactant microparticles synthesized by high pressure spraying method for removal of phenolic pollutants

Biopolymeric microparticles were prepared by rapid expansion of high pressure CO2-chitosan (Chi) solution in sodium bis-(2-ethyl hexyl) sulfosuccinate (AOT) solution. At pressures higher than 2 MPa, ultrafine particles were formed while under this value, wires were obtained. The formation of Chi/AOT complex was confirmed by Fourier Transform Infrared (FTIR) Spectroscopy, whereas scanning electron microscopy was used to characterize the morphology, size and shape of the particles. The FTIR spectrum proved the interaction between the sulfonate groups of AOT and the amino groups of Chi. Microparticles are quasi-spherical in wet conditions and irregular after freeze drying, presenting a rough surface with many pores. Lyophilized hydrophobic microparticles were used to remove phenol and o-cresol from aqueous solution, and the adsorption process showed a maximum efficiency in the 7–8 pH range. The uptake of phenol and o-cresol increased with the amount of particles and decreased with increasing the pollutant concentration. The adsorption occurred rapidly in the first 60–120 minutes, and leveled off thereafter.