Cement augmentation of the proximal femoral nail antirotation for the treatment of two intertrochanteric fractures - a comparative finite element study

BACKGROUND

There are concerns regarding initial stability and cutout effect in proximal femoral nail antirotation (PFNA) treating intertrochanteric fractures. No study have used finite element analysis (FEA) to investigate the biomechanics. This study aimed to compare the cutout effect, stress and displacement between stable (AO31-A1.3) and unstable (AO31-A2.2) intertrochanteric fractures treated by cement augmented PFNA.

METHODS

Four femoral finite element models (FEMs) were constructed and tested under the maximum loading during walking. Non-augmented and augmented PFNA in two different intertrochanteric fractures were respectively simulated, assuming Tip Apex Distance (TAD) < 25 mm within each FEM. The cutout effect, stress and displacement between femur and PFNA were compared in each condition.

RESULTS

Cutout effect was observed in both non-augmented femoral head and was more apparently in unstable intertrochanteric fracture model. After reinforced by bone cement, no cutout effect occurred in two models. Stress concentration were observed on medial part of intertrochanteric region and the proximal part of helical blade before augmented while were observed on femoral shaft and the conjunction between blade and nail after augmented in both FEMs. Displacement mainly appeared on femoral head and the helical blade tip before augmented while distributed moderately on intertrochanteric region and the upper part of nail after augmented in both FEMs. The maximum stress and displacement value of femur decreased both in stable and unstable model after augmented but was more significantly in the unstable one. The maximum stress and displacement value of PFNA increased both in stable and unstable model after augmented but was more significantly in the unstable one.

CONCLUSION

Our FEA study indicated that the cement augmentation of the PFNA biomechanically enhances the cutout resistance in intertrochanteric fracture, this procedure is especially efficient for the unstable intertrochanteric fracture.

Prediction of fracture initiation and propagation in pelvic bones

The objective is developing an XFEM model that is capable of predicting different types of fracture in the pelvic bone under various loading conditions. Previously published mechanical and failure characteristics of cortical and cancellous tissues were implemented and assigned to an intact pelvic bone with specified cortical and cancellous tissues. Various loading conditions, including combined load directions, were applied to the acetabulum to model different types of fracture (e.g., anterior/posterior wall fracture and transverse fracture) in the pelvic bone. The predicated types of fracture and the maximum force at fracture were compared to those acquired from previously published experimental tests. Anterior/posterior wall fracture and transverse fracture were the most common types of fractures determined in the simulations. The XFEM simulations were able to predict similar fractures to those reported in the experimental tests. The maximum fracture force in the XFEM model was found to be 18.6 kN compared to 8.85 kN reported in the previous experimental tests. The results revealed that different types of fracture in the pelvic bones can be caused by the various loading conditions in unstable high-rate impact loads. Using proper mechanical and failure behaviors of cortical and cancellous tissues, XFEM modeling of pelvic bone is capable of predicting bone fracture. In future work, the XFEM models of cancellous and cortical tissues can be assigned to other bones in human body skeleton so that the failure mechanism in such bones can be investigated.

Risk of proximal femoral nail antirotation (PFNA) implant failure upon different lateral femoral wall thickness in intertrochanteric fracture: a finite element analysis

Proximal Femoral Nail Antirotation (PFNA) has been commonly used to treat intertrochanteric fractures, despite the risk of implant failure. The integrity of the femur could influence the risk of implant failure. This study evaluated the influence of lateral femoral wall thickness on the potential of implant failure. A finite element model of the hip was reconstructed from the Computed Tomography of a female patient. Five intertrochanteric fracture models at different lateral femoral wall thickness (T1 = 27.6 mm, T2 = 25.4 mm, T3 = 23.4 mm, T4 = 21.4 mm, and T5 = 19.3 mm) were then created and fixed with PFNA. We simulated a critical loading condition by a high loading case during walking. Elastoplastic material models with yield stress and failure strain were applied to the bone and implant in which breakage can be simulated using the element deletion function. In addition, the stress and displacement of the implant and femur were analysed. Implant breakage occurred at the sides of the proximal nail canal in cases of T4 and T5 which was further supported by the higher maximum von Mises stress and nail displacement. The increased stress and displacement of the implant may implicate a reduction of stability and risk of implant failure. We suggested that precaution shall be taken when the wall thickness was less than 21.4 mm.