Spectrophotometric Determination of Mycophenolate Mofetil as Its Charge-Transfer Complexes with Two π-Acceptors

AQbD based green UPLC method to determine mycophenolate mofetil impurities and Identification of degradation products by QToF LCMS

We report an ideal method for quantifying impurities in mycophenolate mofetil drug substances and their oral suspension preparations. We developed a systematic and eco-friendly analytical approach utilizing quality by design (QbD) and green chemistry principles. Initially, the critical method parameters (CMPs) were screened using a D-optimal design. The robust final method conditions were optimized using a systematic central composite design (CCD). Through graphical and numerical optimization, the protocol conditions were augmented. The pH of mobile phase buffer (25 mM KH₂PO₄) (MP-A), initial gradient composition (% MP-A), flow rate (mL min^-1), and column oven temperatures (°C) are 4.05, 87, 0.4, and 30, respectively. The best possible separation between the critical pairs was achieved while using the Waters Acquity UPLC BEH C₁₈ (100 × 2.1) mm, 1.7 µm analytical column. A mixture of water and acetonitrile in the ratio of 30:70 (v/v) was used as mobile phase-B for the gradient elution. The analytical method was validated in agreement with ICH and USP guidelines. The specificity results revealed that no peaks interfered with the impurities and MPM. The mean recovery of the impurities ranged between 96.2 and 102.7%, and the linearity results r > 0.999 across the range of LOQ - 150%. The precision results (%RSD) ranged between 0.8 and 4.5%. The degradation products formed during the base-induced degradation were identified as isomers of mycophenolic acid and sorbitol esters using Q-ToF LC-MS and their molecular and fragment ion peaks. The developed method eco-friendliness and greenness were assessed using analytical greenness (AGREE), green analytical procedure index (GAPI), and analytical eco score, and found it is green.

Enhancement of Haloperidol Binding Affinity to Dopamine Receptor Via Forming a Charge-Transfer Complex with Picric Acid and 7,7,8,8-Tetracyanoquinodimethane for Improvement of the Antipsychotic Efficacy

Haloperidol (HPL) is a typical antipsychotic drug used to treat acute psychotic conditions, delirium, and schizophrenia. Solid charge transfer (CT) products of HPL with 7,7,8,8-tetracyanoquinodimethane (TCNQ) and picric acid (PA) have not been reported till date. Therefore, we conducted this study to investigate the donor–acceptor CT interactions between HPL (donor) and TCNQ and PA (π-acceptors) in liquid and solid states. The complete spectroscopic and analytical analyses deduced that the stoichiometry of these synthesized complexes was 1:1 molar ratio. Molecular docking calculations were performed for HPL as a donor and the resulting CT complexes with TCNQ and PA as acceptors with two protein receptors, serotonin and dopamine, to study the comparative interactions among them, as they are important neurotransmitters that play a large role in mental health. A molecular dynamics simulation was ran for 100 ns with the output from AutoDock Vina to refine docking results and better examine the molecular processes of receptor–ligand interactions. When compared to the reactant donor, the CT complex [(HPL)(TCNQ)] interacted with serotonin and dopamine more efficiently than HPL only. CT complex [(HPL)(TCNQ)] with dopamine (CTtD) showed the greatest binding energy value among all. Additionally, CTtD complex established more a stable interaction with dopamine than HPL–dopamine.

A Stability-Indicating Ultra Performance Liquid Chromato-Graphic (UPLC) Method for the Determination of a Mycophenolic Acid-Curcumin Conjugate and Its Applications to Chemical Kinetic Studies

A simple, precise, and accurate reversed-phase ultra-performance liquid chromatographic (UPLC) method was developed and validated for the determination of a mycophenolic acid-curcumin (MPA-CUR) conjugate in buffer solutions. Chromatographic separation was performed on a C18 column (2.1 × 50 mm id, 1.7 µm) with a gradient elution system of water and acetonitrile, each containing 0.1% formic acid, at a flow rate of 0.6 mL/min. The column temperature was controlled at 33 °C. The compounds were detected simultaneously at the maximum wavelengths of mycophenolic acid (MPA), 254 nm, and curcumin (CUR), or MPA-CUR, at 420 nm. The developed method was validated according to the ICH Q2(R1) guidelines. The linear calibration curves of the assay ranged from 0.10 to 25 μg/mL (r² ≥ 0.995, 1/x² weighting factor), with a limit of detection and a limit of quantitation of 0.04 and 0.10 μg/mL, respectively. The accuracy and precision of the developed method were 98.4-101.6%, with %CV < 2.53%. The main impurities from the specificity test were found to be MPA and CUR. Other validation parameters, including robustness and solution stability, were acceptable under the validation criteria. Forced degradation studies were conducted under hydrolytic (acidic and alkaline), oxidative, thermal, and photolytic stress conditions. MPA-CUR was well separated from MPA, CUR, and other unknown degradation products. The validated method was successfully applied in chemical kinetic studies of MPA-CUR in different buffer solutions.

Application of two charge transfer complex formation reactions for selective determination of metformin hydrochloride in pharmaceuticals and urine

Background

Metformin hydrochloride (MFH) is a biguanide class anti-diabetic drug used to treat type-2 diabetes mellitus. Its reaction with two charge-transfer complexing agents, p-chloranilic acid (PCA) and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) in acetonitrile medium to yield coloured products measurable at wavelengths of maxima 530.0 and 460.0 nm, respectively, was conveniently used to develop two spectrophotometric methods for analyses of bulk sample and tablets.

Results

The effect of solvent, reagent concentration and reaction time to form charge-transfer (CT) complexes was meticulously studied and optimized. Under optimised conditions, the absorbance at the respective wavelength of maximum versus concentration of MFH was in linear correlation for the range from 8.0 to 320.0 and from 1.6 to 64.0 μg mL-1 in PCA and DDQ methods, respectively, and correspondingly, the values of molar absorptivity of 0.733 × 103 and 0.257 × 104 L mol-1 cm-1 and Sandell sensitivity of 0.3620 and 0.0644 μg cm-2. The quantification (QL) and detection (DL) limits were 2.67 and 0.88 μg mL-1 for PCA method, and 0.33 and 0.11 μg mL-1 for DDQ method.

Conclusion

The new methods were emerged as repeatable and reproducible, with replicate measurements for intra- and inter-day variations as showed by obtained RSD values of < 2%. Within a day and between day relative errors were ≤ 2.18%. Methods were also validated for robustness, ruggedness and selectivity and agreeing results were produced. The methods were used to analyse MFH-containing tablets very accurately and precisely as reflected by the mean recovery value close to 100% and lower RSD values, respectively. Analysis of spiked human urine yielded excellent mean recoveries, indicating the absence of interference from endogenous substances.

Mycophenolate mofetil sensor based on molecularly imprinted polymer/multi-walled carbon nanotubes modified carbon paste electrode

Using square wave voltammetry, a carbon paste electrode modified by molecularly imprinted polymer (MIP) as a recognition element of mycophenolate mofetil (MMF) and multi-walled carbon nanotubes was used for MMF monitoring To investigate the electrode during modification, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were utilized. After optimization of the effective parameters, the anodic peak current of MMF was utilized for dynamic range study which was linear in 9.9 nM-87 μM range. The detection limit of the sensor was 7.0 nM. The capture ability of MIP to target was compared with that of non-imprinted polymer (NIP). The practical application of the sensor in biological fluid samples analysis demonstrates its selectivity, sensitivity, and stability.