Electrospinning of Chitosan for Antibacterial Applications—Current Trends

Chitosan is a natural biopolymer that can be suitable for a wide range of applications due to its biocompatibility, rigid structure, and biodegradability. Moreover, it has been proven to have an antibacterial effect against several bacteria strains by incorporating the advantages of the electrospinning technique, with which tailored nanofibrous scaffolds can be produced. A literature search is conducted in this review regarding the antibacterial effectiveness of chitosan-based nanofibers in the filtration, biomedicine, and food protection industries. The results are promising in terms of research into sustainable materials. This review focuses on the electrospinning of chitosan for antibacterial applications and shows current trends in this field. In addition, various aspects such as the parameters affecting the antibacterial properties of chitosan are presented, and the application areas of electrospun chitosan nanofibers in the fields of air and water filtration, food storage, wound treatment, and tissue engineering are discussed in more detail.

A decade development in the application of chitosan-based materials for dye adsorption: A short review

The presence of dyes in the aquatic environment as a result of anthropogenic activities, especially textile industries, is a critical environmental challenge that hinders the availability of potable water. Different wastewater treatment approaches have been used to remediate dyes in aquatic environments; however, most of these approaches are limited by factors ranging from high cost to the incomplete removal of the dyes and contaminants. Thus, the use of adsorption as a water treatment technology to remove dyes and other contaminants has been widely investigated using different adsorbents. This study evaluated the significance of chitosan as a viable adsorbent for removing dyes from water treatment. We summarised the literature and research results obtained between 2009 and 2020 regarding the adsorption of dyes onto chitosan and modified chitosan-based adsorbents prepared through physical and chemical processing, including crosslinking impregnation, grafting, and membrane preparation. Furthermore, we demonstrated the effects of various chitosan-based materials and modifications; they all improve the properties of chitosan by promoting the adsorption of dyes. Hence, the application of chitosan-based materials with various modifications should be considered a cutting-edge approach for the remediation of dyes and other contaminants in aquatic environments toward the global aim of making potable water globally available.

Coated electrospun polyamide-6/chitosan scaffold with hydroxyapatite for bone tissue engineering

Polyamide-6 (PA6) is a synthetic polymer that bears resemblance to collagen in its backbone and has excellent stability in human body fluid. Chitosan (CS) with the similar structure to that of the polysaccharides existing in the extracellular matrix (ECM), has a more suitable biodegradation rate for the formation of new-bone. Electrospun fiber have nanoscale structure, high porosity and large specific surface area, can simulate the structure and biological function of the natural ECM. To meet the requirements of mechanical properties and biocompatibility of bone tissue engineering, electrospun PA6/CS scaffolds were fabricated by electrospinning technology. The mineralized PA6/CS scaffolds were obtained through immersion in 1.5× simulated body fluid (1.5SBF), which allowed the hydroxyapatite (HA) layer to grow into the thickness range under very mild reaction conditions without the need of a prior chemical modification of the substrate surface. The results showed that electrospun PA6/CS fibrous scaffolds in the diameter range of 60-260 nm mimic the nanostructure of the ECM. The tensile strength and modulus of 10PA6/CS fibrous scaffolds reach up to 12.67 ± 2.31 MPa and 95.52 ± 6.78 MPa, respectively. After mineralization, HA particles uniformly distributed on the surface of PA6/CS fibrous scaffolds in a porous honeycomb structure, and the content of mineral was about 40%. In addition, cell culture study indicated that the mineralized PA6/CS composite scaffolds were non-cytotoxic, and had a good biocompatibility and an ability to promote MC3T3-E1 cell attachment and proliferation.

Modified Electrospun Polymeric Nanofibers and Their Nanocomposites as Nanoadsorbents for Toxic Dye Removal from Contaminated Waters: A Review

Electrospun polymer nanofibers (EPNFs) as one-dimensional nanostructures are characterized by a high surface area-to-volume ratio, high porosity, large number of adsorption sites and high adsorption capacity. These properties nominate them to be used as an effective adsorbent for the removal of water pollutants such as heavy metals, dyes and other pollutants. Organic dyes are considered one of the most hazardous water pollutants due to their toxic effects even at very low concentrations. To overcome this problem, the adsorption technique has proven its high effectiveness towards the removal of such pollutants from aqueous systems. The use of the adsorption technique depends mainly on the properties, efficacy, cost and reusability of the adsorbent. So, the use of EPNFs as adsorbents for dye removal has received increasing attention due to their unique properties, adsorption efficiency and reusability. Moreover, the adsorption efficiency and stability of EPNFs in aqueous media can be improved via their surface modification. This review provides a relevant literature survey over the last two decades on the fabrication and surface modification of EPNFs by an electrospinning technique and their use of adsorbents for the removal of various toxic dyes from contaminated water. Factors affecting the adsorption capacity of EPNFs, the best adsorption conditions and adsorption mechanism of dyes onto the surface of various types of modified EPNFs are also discussed. Finally, the adsorption capacity, isotherm and kinetic models for describing the adsorption of dyes using modified and composite EPNFs are discussed.

Electrostatically coupled SiO2 nanoparticles/poly (L-DOPA) antifouling coating on a nanofiltration membrane

In this work, the fouling resistance of TFC (thin film composite) nanofiltration membranes have been enhanced using an electrostatically coupled SiO₂ (silica dioxide) nanoparticles/poly(L-DOPA) (3-(3,4-dihydroxyphenyl)-l-alanine) antifouling coating. SiO₂ nanoparticles were synthesized in different size ranges and combined with L-DOPA; and then coated as an anti-fouling layer on the membrane surface by recirculated deposition. Membranes were coated with S-NP (silica nanoparticles) in small (19.8 nm), medium (31.6 nm) and large (110.1 nm) sizes. The zwitterionic compound L-DOPA in the form of self-polymerized poly(L-DOPA) (PDOPA) helped with the attachment of the S-NP to the membrane surface. It was confirmed by AFM (atomic force microscopy) measurement that coating of membranes led to an increase in hydrophilicity and reduction in surface roughness, which in turn led to a 60% reduction in the adhesion force of the foulant on the membrane as compared to the neat membrane. The modified membranes experienced almost no flux decline during the filtration experimental period, whereas the unmodified membrane showed a sharp flux decline. The best coating conditions of silica nanoparticles resulting in enhanced anti-fouling properties were identified. The biofouling film formation on the membranes was evaluated quantitatively using the flow cytometry method. The results indicated that the modified membranes had 50% lower microbial population growth in terms of total event count compared to the neat membrane. Overall, the experimental results have confirmed that the coating of electrostatically coupled SiO₂ nanoparticles and PDOPA (S-NP/PDOPA) on TFC-NF (nanofiltration) membrane surfaces is effective in improving the fouling resistance of the membranes. This result has positive implications for reducing membrane fouling in desalination and industrial wastewater treatment applications.

Facile fabrication of a low-cost and environmentally friendly inorganic-organic composite membrane for aquatic dye removal

This study reports a new inorganic-organic composite membrane fabricated by an electrostatic self-assembling method. The low-cost and eco-friendly porous geopolymer (PG) was chosen as a support, on which chitosan (CS), a "green" biomaterial, was used to form an active layer. With optimum dosage of CS (2.0 mL of 1.0% CS solution), the obtained CS/PG membrane exhibited a high porosity of 50.97% with an average pore diameter of 13.93 nm as well as a high water flux of 1663.82 ± 22.46 L/m²·h·bar. The effects of initial concentration, pH, flow rate and temperature of the feed solution on crystal violet (CV) removal by the CS/PG were evaluated in a continuous mode. The results indicated ~95% CV could be removed from water during continuous treating of 14 h. The effectiveness in CV removal by the CS/PG membrane was attributed to the synergistic effect of rejection and adsorption. Furthermore, the composite membrane could be easily regenerated for prolonged use. Overall, this work opens a new possibility of building cost-saving and eco-friendly composite membranes for practical applications in water purification.

Nanomaterials: Solutions to Water-Concomitant Challenges

Plenty of fresh water resources are still inaccessible for human use. Calamities such as pollution, climate change, and global warming pose serious threats to the fresh water system. Although many naturally and synthetically grown materials have been taken up to resolve these issues, there is still plenty of room for enhancements in technology and material perspectives to maximize resources and to minimize harm. Considering the challenges related to the purification of water, materials in the form of nanofiber membranes and nanomaterials have made tremendous contributions to water purification and filtration. Nanofiber membranes made of synthetic polymer nanofibers, ceramic membranes etc., metal oxides in various morphologies, and carbonaceous materials were explored in relation to waste removal from water. In this review, we have discussed a few key materials that have shown effectiveness in removing pollutants from waste water, enabling solutions to existing problems in obtaining clean drinking water.

Application of response surface methodology to tailor the surface chemistry of electrospun chitosan-poly(ethylene oxide) fibers

Chitosan is a promising biocompatible polymer for regenerative engineering applications, but its processing remains challenging due to limited solubility and rigid crystalline structure. This work represents the development of electrospun chitosan/poly(ethylene oxide) blend nanofibrous membranes by means of a numerical analysis in order to identify and tailor the main influencing parameters with respect to accessible surface nitrogen functionalities which are of importance for the biological activity as well as for further functionalization. Depending on the solution composition, both gradient fibers and homogenous blended fiber structures could be obtained with surface nitrogen concentrations varying between 0 and 6.4%. Response surface methodology (RSM) revealed chitosan/poly(ethylene oxide) ratio and chitosan molecular weight as the main influencing factors with respect to accessible nitrogen surface atoms and respective concentrations. The model showed good adequacy hence providing a tool to tailor the surface properties of chitosan/poly(ethylene oxide) blends by addressing the amount of accessible chitosan.

Robust electrospinning cellulose acetate@TiO2 ultrafine fibers for dyeing water treatment by photocatalytic reactions

Cellulose acetate (CA) composite ultrafine fibers containing different TiO₂ nanoparticle (NP) contents were synthesized via electrospinning for effective dyeing water treatment.