Quantitative and qualitative analyses of grafted okra for corrosion inhibition of mild steel in acidic medium

Introduction: Natural plant polymers demonstrate effective corrosion inhibition abilities, because of their numerous binding sites and excellent adsorption abilities. Methodology: In this study, the Box-Behnken method, gravimetric and electrochemical analyses were used to design and investigate the corrosion inhibition potential of a modified graft polymer of okra for mild steel in a 1M HCl medium. The influence of inhibitor concentration, temperature, and time were also investigated. Qualitatively, the Fourier Transform Infrared (FTIR) spectroscopy, Thermogravimetric Analysis (TGA), and Field emission scanning electron microscopy (FESEM) were used to characterize the extracts and evaluate the metal's surface morphology. Results and discussion: The quantitative analyses showed that the modified natural polymer's inhibition efficiency (IE) increased with concentration and reached 73.5% at 800 ppm, with a mixed-type mode of inhibition. From the response surface methodology, it was revealed that temperature influences the IE more than concentration and immersion time. The optimized IE using the desirability function showed the possibility of attaining 88.2% inhibition with inhibitor concentration at 142.3 ppm, temperature at 60.4°C, and an immersion time of 22.4 h. The new functional groups in the hybrid polymer revealed by FTIR analysis shows that grafting improved the inhibitor's adsorption abilities. TGA analysis confirmed the extract's high thermal stability, which highlights the inhibitor's strong adsorption and efficiency for high temperatures. FESEM analysis indicated evidence of inhibitor adsorption onto the metal surface. Conclusion: These findings suggest that the grafting of okra with acrylamide enhances its inhibition properties and contributes to its functionality as a cost-effective plant-based alternative inhibitor against corrosion for mild steel facilities.

Evaluation of pectin isolated from tomato peel waste as natural tin corrosion inhibitor in sodium chloride/acetic acid solution

The pectin from tomato peel waste (TPP) was employed as tin corrosion inhibitor with the aim to enhance the knowledge regarding the application of natural inhibitors, instead synthetic, and reducing the waste disposal for value-added biopolymers production. To evaluate the TPP anticorrosion activity the commercial apple pectin (CAP) was also utilised. The gravimetric tests show that the highest inhibitive impact (η) of 75.9 % (CAP) and 73.9 % (TPP) are gained at concentration of 20 g L^-1. By electrochemical, potentiodynamic polarization and impedance spectroscopy measurements, the maximum η (60.05-65.5 %) are reached at lower concentration (4 g L^-1), due to tendency of pectins to form viscous solution. The prominent decreases in current density with the shifts of potential in the cathodic direction revealed that pectins provided cathodic protection of tin surface. Similar inhibition impact of pectins, and fine agreement between applied methods confirmed their suitability against tin corrosion.

A facile water-induced complexation of lycopene and pectin from pink guava byproduct: Extraction, characterization and kinetic studies

The redfleshed pulp discarded from pink guava puree industry is a rich source of lycopene and pectin. In this study, we developed a facile extraction process employing water as the primary extraction medium to isolate the lycopene and pectin from pink guava decanter. When the decanter was suspended in water, the complexation of lycopene and pectin formed the cloudy solution, where the colloidal complexes were recovered through centrifugation. The presence of lycopene and pectin in the complex was confirmed by the spectroscopic, microscopic and chromatographic analyses. The lycopene fractionated from the complexes had a purity level of 99% and was in all-trans configuration. The colloidal complexes yielding the highest concentration of lycopene was obtained at pH 7, 1% (w/v) solid loading and 25 °C. The experimental data of time-course extraction of lycopene-pectin complex were best fitted with two-site kinetic model, hinting the fast- and slow-release phases in the extraction process.

Electron Beam Synthesis and Characterization of Acrylamide/Acrylic Acid Hydrogels Using Trimethylolpropane Trimethacrylate as Cross-Linker

The purpose of the paper is to present the synthesis and characterization of hydrogels prepared by free-radical copolymerization of acrylamide and acrylic acid in aqueous solutions using potassium persulfate as initiator and trimethylolpropane trimethacrylate as cross-linker, via the radiation technique. The samples were subjected to electron beam treatment in the dose range of 2 to 4 kGy and the influence of the absorbed dose and amount of cross-linker on the swelling properties, diffusion coefficient, and network parameters of hydrogels was investigated. A possible reaction mechanism for acrylamide/acrylic acid/trimethylolpropane trimethacrylate hydrogels was also suggested. The structure and morphology of hydrogels were characterized by Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy.

Modified biopolymer-dextrin based crosslinked hydrogels: application in controlled drug delivery

This review describes hydrogels and their classifications along with the synthesis and properties of biopolymer-dextrin based crosslinked hydrogels towards potential application in controlled drug delivery.