Voltammetric Determination of Codeine on Glassy Carbon Electrode Modified with Nafion/MWCNTs

Electrode Based on the MWCNTs and Electropolymerized Thymolphthalein for the Voltammetric Determination of Total Isopropylmethylphenols in Spices

Isopropylmethylphenols, namely thymol and carvacrol, are natural phenolic monoterpenoids with a wide spectrum of bioactivity making them applicable in the cosmetic, pharmaceutical, and food industry. The dose-dependent antioxidant properties of isopropylmethylphenols require their quantification in real samples. Glassy carbon electrode (GCE) modified with multi-walled carbon nanotubes (MWCNTs) and electropolymerized thymolphthalein has been developed for the sensitive quantification of isopropylmethylphenols. Conditions of thymolphthalein electropolymerization (monomer concentration, number of cycles, and electrolysis parameters) providing the best response to thymol have been found. Scanning electron microscopy and electrochemical methods confirm the effectivity of the electrode developed. The linear dynamic ranges of 0.050-25 and 25-100 µM for thymol and 0.10-10 and 10-100 µM for carvacrol with detection limits of 0.037 and 0.063 µM, respectively, have been achieved in differential pulse mode in Britton-Robinson buffer pH 2.0. The selectivity of the isopropylmethylphenols response in the presence of typical interferences (inorganic ions, saccharides, ascorbic acid) and other phenolics (caffeic, chlorogenic, gallic and rosmarinic acids, and quercetin) is a significant advantage over other electrochemical methods. The electrode has been used in the analysis of oregano and thyme spices. Total isopropylmethylphenols contents have been evaluated after a single sonication-assisted extraction with methanol.

CUPRAC Voltammetric Determination of Antioxidant Capacity in Tea Samples by Using Screen-Printed Microelectrodes

Measurement of antioxidant capacity represents an analytical major challenge in terms of accuracy, efficiency, rapid response, or low cost of detection methods. Quantification of antioxidant capacity of food samples using disposable screen-printed microelectrodes (SPMEs) was based on cyclic voltammetry versus open-circuit potential (CV vs OCP) and differential pulse voltammetry (DPV) as compared with spectrophotometric measurement of the CUPRAC reaction with 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (trolox). The SPMEs are organic-resistant electrodes and thus compatible with food samples and organic solvents used to dissolve trolox. A micropipette was used to release a drop of 50 μL sample on the spotted surface of the SPME sensor/working electrode that was time programmed to function according to the working protocol. The SPME response was linearly correlated with trolox content. This preliminary demonstration was focused on the analysis of tea infusions, due to the simplicity and reproducibility of the samples' preparations involved. Analytical results of the antioxidant capacity (expressed as mol·L^-1 trolox equivalents) of the tea samples showed a good agreement in the case of spectrophotometry and differential pulse voltammetry (R ² > 0.998). DPV with SPME based on CUPRAC reactions was proven to be a promising approach for the characterization of antioxidant capacity of tea samples with rapid response, cost-effectiveness, and simplicity of operation.

Glassy carbon electrode modified with carbon black for sensitive estradiol determination by means of voltammetry and flow injection analysis with amperometric detection

A voltammetric method for fast and sensitive estradiol determination using carbon black modified glassy carbon electrode (CBGC) is proposed. The use of carbon black as a modifying layer led to obtain low detection limit (9.2·10^-8 mol L^-1 for a preconcentration time of 60 s) and stability of registered signals (measured as RSD is 1.3%, n = 7, estradiol concentration 0.5·10^-6 mol L^-1). Cyclic voltammetry study revealed that in phosphate media estradiol suffers irreversible one-proton and one-electron oxidation process. Under the optimum conditions, estradiol calibration curve was linear in the concentration range from 0.15·10^-6 to 3.5·10^-6 mol L^-1. The proposed method enable to determine estradiol content in different pharmaceutical formulation with good recovery. Amperometric measurements of estradiol were performed as well to indicate the possibility of its fast and accurate determination under the flow conditions.