Toughening of Poly(L-lactide) with Blends of Poly(ε-caprolactone-co-L-lactide) in the Presence of Chain Extender

Raman evaluation of the crystallinity degree and composition of poly(L-lactide-co-ε-caprolactone)

In this work, we study two series of the copolymers of L-lactide (LLA) and ε-caprolactone (CL) with the CL molar content of 5, 15, and 30 %. The first series was the commercial semicrystalline granules (Corbion, Netherlands), which we analyzed without any additional modification. The second series was amorphous films, prepared from the granules by hot pressing with the subsequent fast quenching in order to avoid the crystallization. We used Raman spectroscopy in conjunction with the quantum chemical modeling to evaluate the structure of the copolymers. As additional methods, we applied X-ray diffraction (XRD) analysis and differential scanning calorimetry (DSC). The main result of our study is the elaboration of the Raman methods of quantitative analysis of the relative contents of the comonomers and the crystallinity degree of the poly(L-lactide-co-ε-caprolactone). These methods are based on measurements of the ratios of the peak intensities of the poly(L-lactide) (PLLA) bands at 411 and 874 cm-1, the PLLA band at 2947 cm-1 and the poly(ε-caprolactone) band at 2914 cm-1. Raman study shows that growth of the CL content causes the monotonous decrease in the crystallinity degree of PLLA blocks. Density functional theory analysis of LLA decamer in the conformation of helix 103 allows us to assign the PLLA Raman bands. The Raman data on the composition and crystallinity degree of the copolymers correlate very well with the results of XRD and DSC studies, as well as with the information on the composition of the copolymers provided by manufacturer.

Investigation of the Effects of Chain Extender on Material Properties of PLA/PCL and PLA/PEG Blends: Comparative Study between Polycaprolactone and Polyethylene Glycol

This study investigated the effect of the Joncryl concentration on the properties of polylactide/poly(ε-caprolactone) (PLA/PCL) and PLA/poly(ethylene glycol) (PEG) blends. The addition of Joncryl influenced the properties of both PLA-based blends. In the blend of PLA/PCL blends, the addition of Joncryl reduced the size of PCL droplets, which implies the compatibility of the two phases, while PLA/PEG blends showed a co-continuous type of morphology at 0.1% and 0.3 wt.% of Joncryl loading. The crystallinity of PCL and PEG was studied on both PLA/PCL and PLA/PEG blend systems. In both scenarios, the crystallinity of the blends decreased upon the addition of Joncryl. Thermal stabilities were shown to depend on the addition of Joncryl. The toughness increased when 0.5 wt.% of Joncryl was added to both systems. However, the stiffness of PLA/PCL decreased, while the stiffness of PLA/PEG increased with the increasing concentration of Joncryl. This study provides new insight into the effect of chain extenders on the compatibility of PLA-based blends.

Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone)

Well-defined six-arm star-branched bio-degradable block copolymers of l-lactide and ε-caprolactone were prepared using controlled ring-opening polymerization and a sequential monomer addition method using dipentaerythritol as the initiator core and organocatalysts at low temperatures in solution. Sequence of enchainment was changed by reversing the order of monomer addition giving, either, a crystalline PLA block or an amorphous PCL block as the outer segment. Well-defined six-arm poly(ε-caprolactone-b-l-lactide, 6s-PCL-b-PLA) block copolymers were obtained with a range of segment molecular weights. However, in the case of six-arm poly(l-lactide-b-ε-caprolactone, 6s-PLA-b-PCL), disruption of the block structure was observed on account of competing transesterification reactions accompanying a chain-growth reaction. Such sequence-controlled block copolymers showed interesting phase morphologies, as evidenced by differential scanning calorimetry (DSC) studies. 6s-PCL-b-PLA showed two glass-transition temperatures and two melting temperatures characteristic of the amorphous and crystalline blocks. 6s-PCL-b-PLA and 6s-PLA-b-PCL with different segment chain lengths were solution blended (10 wt %) with a commercially sourced PLA. All the blends were highly transparent. The structure and properties of the blend were examined by DSC, measurement of mechanical properties, and scanning electron microscopy. The results show that a phase-separated 6s-PCL-b-PLA copolymer results in two- to three-fold improvement in tensile toughness without the loss of modulus. A possible hypothesis for the mechanism of tensile toughness in the blend has been proposed.

Application of Cell, Tissue, and Biomaterial Delivery in Cardiac Regenerative Therapy

Cardiovascular diseases (CVD) are the leading cause of death around the world, being responsible for 31.8% of all deaths in 2017 (Roth, G. A. et al. The Lancet 2018, 392, 1736-1788). The leading cause of CVD is ischemic heart disease (IHD), which caused 8.1 million deaths in 2013 (Benjamin, E. J. et al. Circulation 2017, 135, e146-e603). IHD occurs when coronary arteries in the heart are narrowed or blocked, preventing the flow of oxygen and blood into the cardiac muscle, which could provoke acute myocardial infarction (AMI) and ultimately lead to heart failure and death. Cardiac regenerative therapy aims to repair and refunctionalize damaged heart tissue through the application of (1) intramyocardial cell delivery, (2) epicardial cardiac patch, and (3) acellular biomaterials. In this review, we aim to examine these current approaches and challenges in the cardiac regenerative therapy field.

Strategies for Enhancing Polyester-Based Materials for Bone Fixation Applications

Polyester-based materials are established options, regarding the manufacturing of bone fixation devices and devices in routine clinical use. This paper reviews the approaches researchers have taken to develop these materials to improve their mechanical and biological performances. Polymer blending, copolymerisation, and the use of particulates and fibre bioceramic materials to make composite materials and surface modifications have all been studied. Polymer blending, copolymerisation, and particulate composite approaches have been adopted commercially, with the primary focus on influencing the in vivo degradation rate. There are emerging opportunities in novel polymer blends and nanoscale particulate systems, to tune bulk properties, and, in terms of surface functionalisation, to optimise the initial interaction of devices with the implanted environment, offering the potential to improve the clinical performances of fracture fixation devices.

Improving the Thermal and Mechanical Properties of Poly(l-lactide) by Forming Nanocomposites with an in Situ Ring-Opening Intermediate of Poly(l-lactide) and Polyhedral Oligomeric Silsesquioxane

In this study, a series of poly(l-lactide) and (3-amino)-propylheptaisobutyl cage silsesquioxane (PLLA-AMPOSS) intermediates were first fabricated using single-arm in situ solution polymerization of LLA monomers and AMPOSS nanoparticles with different contents, 0.02-1.00 mol%. Then, the PLLA-AMPOSS intermediate with 0.5 mol% AMPOSS was selected as a representative and investigated by nuclear magnetic resonance (NMR) and X-ray diffraction (XRD). Afterwards, it was added into the pure PLLA with different mass fractions. Finally, the thermal behavior, crystallization kinetics, morphological characteristics, and mechanical properties of the obtained PLLA/PLLA-AMPOSS nanocomposites were carefully measured and investigated by differential scanning calorimetry (DSC), polarizing microscopy (POM), scanning electron microscopy (SEM), and tensile test. After comparing the PLLA-AMPOSS intermediate and PLLA/AMPOSS blend, the results show that the ring-open polymerization of PLLA-AMPOSS intermediate was successful. The results also show that the existence of PLLA-AMPOSS has a strong influence on the crystallization behavior of PLLA/PLLA-AMPOSS composites, which can be attributed to the heterogeneous nucleation effect of PLLA-AMPOSS. In addition, it was also found from the tensile test results that the addition of the PLLA-AMPOSS nanofiller improved the tensile strength and strain at break of PLLA/PLLA-AMPOSS nanocomposites. All of these results indicate the good nucleating effect of PLLA-AMPOSS and that the AMPOSS disperses well in the PLLA/PLLA-AMPOSS nanocomposites. A conclusion can be drawn that the selective nucleating agent and the combined method of in situ ring-opening polymerization and physical blending are feasible and effective.