Pleiotropic Properties of Amphiphilic Dihydropyridines, Dihydropyridones, and Aminovinylcarbonyl Compounds

Development of Self-Assembling bis-1,4-Dihydropyridines: Detailed Studies of Bromination of Four Methyl Groups and Bromine Nucleophilic Substitution

One of the most important steps in the synthesis of 1,4-dihydropyridine (1,4-DHP) amphiphiles is the bromination of methyl groups in positions 2 and 6 of the entire ring. However, up to now, only N-bromosuccinimide was mainly used for bromination 1,4-DHPs. In this work, the synthesis of bis-1,4-DHP derivatives with ethyl and dodecyl ester groups attached to 1,4-DHP ring at positions 3 and 5 was performed by Hantzsch synthesis. The experimental studies were carried out to find out the best conditions and the agent for the tetra bromination of bis-1,4-DHP methyl groups at positions 2 and 6. Four different brominating agents were screened. The use of pyridinium bromide-perbromide in ethyl acetate was found to be optimal for the bromination of methyl groups. The bromination reaction was followed by the synthesis of cationic pyridine moiety containing amphiphilic bis-1,4-DHP derivatives. By nucleophilic substitution of bromine with various substituted pyridines, 12 new amphiphilic bis-1,4-DHP derivatives were obtained. Evaluation of self-assembling properties of tetracationic bis-1,4-dihydropyridine derivatives by dynamic light scattering (DLS) measurements was also performed.

Synthesis and Characterization of Novel Amphiphilic N-Benzyl 1,4-Dihydropyridine Derivatives-Evaluation of Lipid Monolayer and Self-Assembling Properties

Liposomes and other nanoparticles have been widely studied as innovative nanomaterials because of their unique properties. Pyridinium salts, on the basis of 1,4-dihydropyridine (1,4-DHP) core, have gained significant attention due to their self-assembling properties and DNA delivery activity. This study aimed to synthesize and characterize original N-benzyl substituted 1,4-dihydropyridines and evaluate the influence on structure modifications on compound physicochemical and self-assembling properties. Studies of monolayers composed of 1,4-DHP amphiphiles revealed that the mean molecular areas values were dependent on the compound structure. Therefore, the introduction of N-benzyl substituent to the 1,4-DHP ring enlarged the mean molecular area by almost half. All nanoparticle samples obtained by ethanol injection method possessed positive surface charge and average diameter of 395-2570 nm. The structure of the cationic head-group affects the size of the formed nanoparticles. The diameter of lipoplexes formed by 1,4-DHP amphiphiles and mRNA at nitrogen/phosphate (N/P) charge ratios of 1, 2, and 5 were in the range of 139-2959 nm and were related to the structure of compound and N/P charge ratio. The preliminary results indicated that more prospective combination are the lipoplexes formed by pyridinium moieties containing N-unsubstituted 1,4-DHP amphiphile 1 and pyridinium or substituted pyridinium moieties containing N-benzyl 1,4-DHP amphiphiles 5a-c at N/P charge ratio of 5, which would be good candidates for potential application in gene therapy.

1,1′-{[3,5-Bis((dodecyloxycarbonyl)-4-phenyl-1,4-dihydropyridine-2,6-diyl]bis(methylene)}bis[4-(anthracen-9-yl)pyridin-1-ium] Dibromide

A synthesis of a cationic moiety and fluorescent moieties containing amphiphilic 1,4-dihydropyridine (1,4-DHP) derivatives was performed starting with the Hantzsch-type cyclization of dodecyl acetoacetate, phenylaldehyde and ammonium acetate. Bromination of the 2,6-dimethyl groups of a parent 1,4-DHP compound, followed by nucleophilic substitution of bromine with 4-(anthracen-9-yl)pyridine, produced the desired 1,1′-{[3,5-bis((dodecyloxycarbonyl)-4-phenyl-1,4-dihydropyridine-2,6-diyl]bis(methylene)}bis[4-(anthracen-9-yl)pyridin-1-ium] dibromide. The obtained target compound was fully characterized by the IR, 1H NMR, 13C NMR and HRMS data. Studies of the self-assembling properties and characterization of the nanoparticles obtained by the ethanol injection method were performed using dynamic light scattering (DLS) measurements. DLS measurement data showed that 1,1′-{[3,5-bis((dodecyloxycarbonyl)-4-phenyl-1,4-dihydropyridine-2,6-diyl]bis(methylene)}bis[4-(anthracen-9-yl)pyridin-1-ium] dibromide produced liposomes that had average diameters of 200 nm when the samples were freshly prepared, and 140 nm after 7 days or 1 month storage. The PDI values of the samples were approximately 0.50 and their zeta-potential values were approximately 41 mV when the samples were freshly prepared, and 33 mV after storage. The obtained nanoparticles were stored at room temperature for one month and remained stable during that period. The mean molecular area of the cationic 1,4-DHP-anthracene hybrid 4 was 118 Å2, while the mean molecular area of the cationic 1,4-DHP 5 without anthracene substituents was only 83 Å2. The photoluminescence quantum yield (PLQY) value for the EtOH solution of the 1,4-DHP derivative 4 was 10.8%, but for the 1,4-DHP derivative 5 it was only 1.8%. These types of compounds could be used as synthetic lipids in the further development of prospective theranostic delivery systems.

Synthesis and Evaluation of Self-Assembling Properties of 3-(3,5-Difluoro-3,5-bis((alkoxy)carbonyl)-2,6-dioxoheptan-4-yl)-1-methylpyridin-1-ium Iodides

A synthesis of 3-(3,5-difluoro-3,5-bis((alkoxy)carbonyl)-2,6-dioxoheptan-4-yl)-1-methylpyridin-1-ium iodides with ethyl or nonyl ester groups at positions 3 and 5 was performed. Treatment of the corresponding 2’,6’-dimethyl-1’,4’-dihydro-[3,4’-bipyridine]-3’,5’-dicarboxylates with Selectfluor® followed by quaternization of pyridine moiety in the obtained dialkyl 2,4-diacetyl-2,4-difluoro-3-(pyridin-3-yl)pentanedioates with methyl iodide gave the desired 3-(3,5-difluoro-3,5-bis((alkoxy)carbonyl)-2,6-dioxoheptan-4-yl)-1-methylpyridin-1-ium iodides. This type of compound would be useful as synthetic lipids for further development of the delivery systems. The obtained target compounds were fully characterized by 1H NMR, 19F NMR, 13C NMR, HRMS, IR and UV data. The estimation of self-assembling properties and characterization of the nanoparticles obtained by ethanol solution injection in an aqueous media were performed by dynamic light scattering (DLS) measurements. DLS measurement data showed that 3-(3,5-difluoro-3,5-bis((nonyloxy)carbonyl)-2,6-dioxoheptan-4-yl)-1-methylpyridin-1-ium iodide created liposomes with the average diameter of 300–400 nm and polydispersity index (PDI) value around 0.30–0.40, while 3-(3,5-difluoro-3,5-bis((ethyloxy)carbonyl)-2,6-dioxoheptan-4-yl)-1-methylpyridin-1-ium iodide formed a heterogeneous sample with PDI value 1, which was not prospective for delivery system development.

1,1′-{[3,5-Bis(dodecyloxycarbonyl)-4-(naphthalen-2-yl)-1,4-dihydropyridine-2,6-diyl]bis(methylene)}bis{4-[(E)-2-(naphthalen-2-yl)vinyl]pyridin-1-ium}dibromide

Synthesis of a double-charged cationic amphiphilic 1,4-dihydropyridine derivative with dodecyl ester groups at positions 3 and 5 of the 1,4-DHP ring was performed starting from Hantzsch type cyclization of dodecyl acetoacetate, 2-naphthaldehyde and ammonium acetate. Bromination of this compound followed by nucleophilic substitution of bromine with (E)-4-(2-(naphthalen-2-yl)vinyl)pyridine gave the desired cationic amphiphilic 1,1′-{[3,5-bis(dodecyloxycarbonyl)-4-(naphthalen-2-yl)-1,4-dihydropyridine-2,6-diyl]bis(methylene)}bis{4-[(E)-2-(naphthalen-2-yl)vinyl]pyridin-1-ium}dibromide. The obtained target compound was fully characterized by IR, UV, 1H-NMR, 13C-NMR, HRMS and microanalysis. The characterization of the cationic 1,4-DHP nanoparticles in an aqueous solution was performed by DLS measurements. The obtained results showed that the compound formed nanoparticles with an average diameter of around 300 nm, a PDI value of around 490 and a zeta-potential of around 20 mV for freshly prepared samples. However, after one week of storage at room temperature, an aggregation of nanoparticles was detected.

Evaluation of Physicochemical Properties of Amphiphilic 1,4-Dihydropyridines and Preparation of Magnetoliposomes

This study was focused on the estimation of the targeted modification of 1,4-DHP core with (1) different alkyl chain lengths at 3,5-ester moieties of 1,4-DHP (C₁₂, C₁₄ and C₁₆); (2) N-substituent at position 1 of 1,4-DHP (N-H or N-CH₃); (3) substituents of pyridinium moieties at positions 2 and 6 of 1,4-DHP (H, 4-CN and 3-Ph); (4) substituent at position 4 of 1,4-DHP (phenyl and napthyl) on physicochemical properties of the entire molecules and on the characteristics of the obtained magnetoliposomes formed by them. It was shown that thermal behavior of the tested 1,4-DHP amphiphiles was related to the alkyl chains length, the elongation of which decreased their transition temperatures. The properties of 1,4-DHP amphiphile monolayers and their polar head areas were determined. The packing parameters of amphiphiles were in the 0.43–0.55 range. It was demonstrated that the structure of 1,4-DHPs affected the physicochemical properties of compounds. “Empty” liposomes and magnetoliposomes were prepared from selected 1,4-DHP amphiphiles. It was shown that the variation of alkyl chains length or the change of substituents at positions 4 of 1,4-DHP did not show a significant influence on properties of liposomes.