Evaluation of the Risk of Recurrence in Patients with Local Advanced Rectal Tumours by Different Radiomic Analysis Approaches

Predictive performance of radiomic models based on features extracted from pretrained deep networks

OBJECTIVES

In radiomics, generic texture and morphological features are often used for modeling. Recently, features extracted from pretrained deep networks have been used as an alternative. However, extracting deep features involves several decisions, and it is unclear how these affect the resulting models. Therefore, in this study, we considered the influence of such choices on the predictive performance.

METHODS

On ten publicly available radiomic datasets, models were trained using feature sets that differed in terms of the utilized network architecture, the layer of feature extraction, the used set of slices, the use of segmentation, and the aggregation method. The influence of these choices on the predictive performance was measured using a linear mixed model. In addition, models with generic features were trained and compared in terms of predictive performance and correlation.

RESULTS

No single choice consistently led to the best-performing models. In the mixed model, the choice of architecture (AUC + 0.016; p < 0.001), the level of feature extraction (AUC + 0.016; p < 0.001), and using all slices (AUC + 0.023; p < 0.001) were highly significant; using the segmentation had a lower influence (AUC + 0.011; p = 0.023), while the aggregation method was insignificant (p = 0.774). Models based on deep features were not significantly better than those based on generic features (p > 0.05 on all datasets). Deep feature sets correlated moderately with each other (r = 0.4), in contrast to generic feature sets (r = 0.89).

CONCLUSIONS

Different choices have a significant effect on the predictive performance of the resulting models; however, for the highest performance, these choices should be optimized during cross-validation.

Application of Radiomics in Predicting Treatment Response to Neoadjuvant Chemoradiotherapy in Locally Advanced Rectal Cancer: Strategies and Challenges

Neoadjuvant chemoradiotherapy (nCRT) followed by total mesorectal excision is the standard treatment for locally advanced rectal cancer (LARC). A noninvasive preoperative prediction method should greatly assist in the evaluation of response to nCRT and for the development of a personalized strategy for patients with LARC. Assessment of nCRT relies on imaging and radiomics can extract valuable quantitative data from medical images. In this review, we examined the status of radiomic application for assessing response to nCRT in patients with LARC and indicated a potential direction for future research.

Computed tomography-based radiomics nomogram for the preoperative prediction of perineural invasion in colorectal cancer: a multicentre study

PURPOSE

To develop and validate a computed tomography (CT) radiomics nomogram from multicentre datasets for preoperative prediction of perineural invasion (PNI) in colorectal cancer.

METHODS

A total of 299 patients with histologically confirmed colorectal cancer from three hospitals were enrolled in this retrospective study. Radiomic features were extracted from the whole tumour volume. The least absolute shrinkage and selection operator logistic regression was applied for feature selection and radiomics signature construction. Finally, a radiomics nomogram combining the radiomics score and clinical predictors was established. The receiver operating characteristic curve and decision curve analysis (DCA) were used to evaluate the predictive performance of the radiomics nomogram in the training cohort, internal validation and external validation cohorts.

RESULTS

Twelve radiomics features extracted from the whole tumour volume were used to construct the radiomics model. The area under the curve (AUC) values of the radiomics model in the training cohort, internal validation cohort, external validation cohort 1, and external validation cohort 2 were 0.82 (0.75-0.90), 0.77 (0.62-0.92), 0.71 (0.56-0.85), and 0.73 (0.60-0.85), respectively. The nomogram, which combined the radiomics score with T category and N category by CT, yielded better performance in the training cohort (AUC = 0.88), internal validation cohort (AUC = 0.80), external validation cohort 1 (AUC = 0.75), and external validation cohort 2 (AUC = 0.76). DCA confirmed the clinical utility of the nomogram.

CONCLUSIONS

The CT-based radiomics nomogram has the potential to accurately predict PNI in patients with colorectal cancer.

Perception of the Impact of Artificial Intelligence in the Decision-Making Processes of Public Healthcare Professionals

Technologies are increasingly independent and play important roles in society. Artificial intelligence (AI) is a branch of science that can improve various environments and processes. The health sector stands out among these contexts, especially ophthalmology and dentistry. Studies evaluating the impact of using these technologies in these contexts are still developing. There are still few studies that assess how AI can impact the decision-making process of health professionals and how it can improve the quality of care provided to these professionals. In this sense, this study aims to evaluate the perception of the impact of AI on the decision-making process of health professionals and the quality of patient care from the perspective of ophthalmologists and dentists. The methodological strategy used was the application of an online questionnaire with eighteen professionals in these areas. Based on the respondents' opinions, we sought to assess how these decision-making processes are affected by the use of technologies and how they impact the quality of patient care. As a result, it was observed that AI has become essential and a facilitator of the diagnostic processes. However, it presents some challenges related to cost, accessibility, AI x  professional responsibility, and incentive of agreements.

The Practices of Solid Waste Utility and Thriving Conditions of Logistics (a Case of Tepi Town): A Study to Treat the Healthy Environment

Unwanted remains, discarded residues, and byproduct materials that are not required by the initial user are known as wastes. In Ethiopia, improper solid waste management becomes endemic and it affects the health conditions, comforts, and freedom of town communities. Improper solid waste management can also adversely affect infrastructure damages, socioeconomic conditions, and environmental and health problems. So, awareness creation among the communities is necessary. The main objective of the study was to assess the management of existing solid waste activities and reverse logistic systems in Tepi town. The impacts of improper solid waste management were reduced through waste accumulation, transportation, recycling, and waste removal. Available pieces of information for the study were gathered from 450 near house places and 549 survivals. The collected data were analyzed by using Vensim system dynamics software, and the obtained results were modeled by a system dynamic cause and effect relationship diagram. Finally, the appropriate recommendations for communities, municipals, and institutions were provided.

Quantitative Evaluation of Extramural Vascular Invasion of Rectal Cancer by Dynamic Contrast-Enhanced Magnetic Resonance Imaging

This study was carried out to explore the preoperative predictive value of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) in extramural vascular invasion (EMVI) in patients with rectal cancer. 124 patients with rectal cancer were randomly divided into two groups, with 62 groups in each group. One group used conventional magnetic resonance imaging (MRI) and was recorded as the control group. The other group used DCE-MRI and was recorded as the experimental group. The diagnostic value was evaluated by comparing the MRI quantitative parameters of EMVI positive and EMVI negative patients, as well as the area under the curve (AUC) of the receiver operating characteristic curve (ROC), diagnostic sensitivity, and specificity of the two groups. The results showed that the Ktrans and Ve values of EMVI positive patients in the experimental group and the control group were 1.08 ± 0.97 and 1.03 ± 0.93, and 0.68 ± 0.29 and 0.65 ± 0.31, respectively, which were significantly higher than those in EMVI negative patients (P < 0.05). The AUC of EMVI diagnosis in the experimental group and the control group were 0.732 and 0.534 (P < 0.05), the sensitivity was 0.913 and 0.765 (P < 0.05), and the specificity was 0.798 and 0.756 (P > 0.05), respectively. In conclusion, DCE-MRI has a higher diagnostic value than conventional MRI in predicting EMVI in patients with rectal cancer, which was worthy of further clinical promotion.

Artificial Intelligence Technique of Synthesis and Characterizations for Measurement of Optical Particles in Medical Devices

The aim of this study is to demonstrate the effect of particle size on semiconductor properties; artificial intelligence is being used for the research methods. As a result, we picked cadmium sulfide (CdS), which is a unique semiconductor material that is employed in a broad variety of current applications. Given that CdS has distinct electrical and optical characteristics, it may be employed in the production of solar cells, for example. Solar cells, as is also well known, have become an essential source of energy in the world. Within the visible range (500-700 nm), we create one layer of bulk CdS and one layer of nano-CdS air bulk CdS air and air nano-CdS air. We used a number of instrumentation methods to investigate the naked CdS nanoparticles, including XRD, SEM-EDX, UV-Vis spectroscopy, TEM, XPS, and PL spectroscopy, among others. The results show that for bulk CdS at normal incidence, the transmittance is T = 45, and for nano-CdS with particle size 3 nm, the transmittance is T = 85.8, with transverse-electric (S-polarized) and transverse-magnetic (P-polarized) transmittances of TE = 75 and TM = 80, respectively.

Applying Dynamic Systems to Social Media by Using Controlling Stability

This study focuses on hybrid synchronization, a new synchronization phenomenon in which one element of the system is synced with another part of the system that is not allowing full synchronization and nonsynchronization to coexist in the system. When $\underset{t⟶\infty }{\lim }Y-\alpha X=0$ , where Y and X are the state vectors of the drive and response systems, respectively, and Wan ( $\alpha$  =  $\mp$ 1)), the two systems’ hybrid synchronization phenomena are realized mathematically. Nonlinear control is used to create four alternative error stabilization controllers that are based on two basic tools: Lyapunov stability theory and the linearization approach.

Comparative Study of Artificial Intelligence Techniques for the Diagnosis of Chronic Nerve Diseases

Farming is essential to the long-term viability of any economy. It differs in each country, but it is essential for long-term economic success. Only a few of the agricultural industry's issues include a lack of suitable irrigation systems, weeds, and plant monitoring concerns as a consequence of efficient management in distinct open and closed zones for crop and plant treatment. The objective of this work is to carry out a study on the use of artificial intelligence and computer vision methods for diagnosis of diseases in agro sectors in the context of agribusiness, demonstrating the feasibility of using these techniques as tools to support automation and obtain productivity gains in this sector. During the literary analysis, it was determined that technology could improve efficiency, hence decreasing these types of concerns. Given the consequences of a wrong diagnosis, diagnosis is work that requires a high level of precision. Fuzzy cognitive maps were shown to be the most efficient method of utilizing bibliographically reviewed preferences, which led to the consideration of neural networks as a second option because this technique is the most robust in terms of the qualifying criteria of the data stored in databases.

A Novel of New 7D Hyperchaotic System with Self-Excited Attractors and Its Hybrid Synchronization

In this study, a novel 7D hyperchaotic model is constructed from the 6D Lorenz model via the nonlinear feedback control technique. The proposed model has an only unstable origin point. Thus, it is categorized as a model with self-excited attractors. And it has seven equations which include 19 terms, four of which are quadratic nonlinearities. Various important features of the novel model are analyzed, including equilibria points, stability, and Lyapunov exponents. The numerical simulation shows that the new class exhibits dynamical behaviors such as chaotic and hyperchaotic. This paper also presents the hybrid synchronization for a novel model via Lyapunov stability theory.

Hand Gesture of Recognition Pattern Analysis by Image Treatment Techniques

The goal of this project is to write a program in the C++ language that can recognize motions made by a subject in front of a camera. To do this, in the first place, a sequence of distance images has been obtained using a depth camera. Later, these images are processed through a series of blocks into which the program has been divided; each of them will yield a numerical or logical result, which will be used later by the following blocks. The blocks into which the program has been divided are three; the first detects the subject's hands, the second detects if there has been movement (and therefore a gesture has been made), and the last detects the type of gesture that has been made accomplished. On the other hand, it intends to present to the reader three unique techniques for acquiring 3D images: stereovision, structured light, and flight time, in addition to exposing some of the most used techniques in image processing, such as morphology and segmentation.

Implementation of Machine Learning Models for the Prevention of Kidney Diseases (CKD) or Their Derivatives

Chronic kidney disease (CKD) is a global health issue with a high rate of morbidity and mortality and a high rate of disease progression. Because there are no visible symptoms in the early stages of CKD, patients frequently go unnoticed. The early detection of CKD allows patients to receive timely treatment, slowing the disease's progression. Due to its rapid recognition performance and accuracy, machine learning models can effectively assist physicians in achieving this goal. We propose a machine learning methodology for the CKD diagnosis in this paper. This information was completely anonymized. As a reference, the CRISP-DM® model (Cross industry standard process for data mining) was used. The data were processed in its entirety in the cloud on the Azure platform, where the sample data was unbalanced. Then the processes for exploration and analysis were carried out. According to what we have learned, the data were balanced using the SMOTE technique. Four matching algorithms were used after the data balancing was completed successfully. Artificial intelligence (AI) (logistic regression, decision forest, neural network, and jungle of decisions). The decision forest outperformed the other machine learning models with a score of 92%, indicating that the approach used in this study provides a good baseline for solutions in the production.