Anticoagulant mechanisms of covalent antithrombin-heparin investigated by thrombelastography. Comparison with unfractionated heparin and low-molecular-weight heparin

Surface modification of polyvinyl chloride with sodium alginate/carboxymethyl chitosan and heparin for realizing the anticoagulation

Thrombosis of extracorporeal circuits causes significant morbidity and mortality worldwide. In this study, plasma treatment technology and chemical grafting method were used to construct heparinized surfaces on the PVC substrate, which could not only reduce thrombosis but also decrease the side effects of the direct injection of anticoagulants. The PVC substrate was modified by plasma treatment technology firstly to obtain the active surface with the hydroxyl groups used for grafting. Then, heparin was grafted onto the modified PVC surface using different grafting strategies to prepare different heparinized surfaces. The experimental results indicated that the sodium alginate (SA) and carboxymethyl chitosan (CCS) used as interlayers could significantly increase the graft density of heparin to improve the anticoagulant effects and hemocompatibility of heparinized surfaces. In addition, the modification of heparin can further improve the anticoagulant effects. The CCS/low-molecular-weight heparin (LWMH) surface has the best anticoagulant properties, which can prolong the activated partial thromboplastin time (APTT) values of human plasma for about 35 s, reduce the hemolysis rates to <0.3 %, and perform well in the in-vitro blood circulation test. The heparinized surfaces prepared in this work have great application potential in anticoagulant treatment for medical devices.

Thrombin and Factor Xa Hydrolysis of Chromogenic Substrates in the Presence of Sulfated Derivatives of Galactomannan and Galactoglucomannan Natural Gels

Polysaccharides are important structural components of all plant species. Gel-like polysaccharides have found wide application in various fields, including medicine, construction, and the food industry. In the present work, galactomannan and galactoglucomannan gel-like polysaccharides were modified with sulfate groups and their anticoagulant activity was studied. Sulfation with chlorosulfonic acid in pyridine and with sulfamic acid in pyridine and a sulfamic acid-urea deep eutectic solvent were used as synthesis routes. The resulting gel-like polysaccharide sulfates were studied by elemental analysis, Fourier-transform infrared spectroscopy, and gel permeation chromatography. It was established that the anticoagulant effect of sulfated galactoglucomannan (SGGM) and galactomannan (SGM-1 and SGM-2) is related to an independent antithrombin-independent decrease in the amidolytic activity of thrombin and factor Xa. It is shown that the inhibitory activity of SGGM and SGM-2 against the collagen-induced platelet aggregation can be an additional factor in selecting compounds that are most promising for modifying polymer surfaces to ensure resistance to blood clotting.

Analysis of sulfates on low molecular weight heparin using mass spectrometry: structural characterization of enoxaparin

INTRODUCTION

Structural characterization of low molecular weight heparin (LMWH) is critical to meet biosimilarity standards. In this context, the review focuses on structural analysis of labile sulfates attached to the side-groups of LMWH using mass spectrometry. A comprehensive review of this topic will help readers to identify key strategies for tackling the problem related to sulfate loss. At the same time, various mass spectrometry techniques are presented to facilitate compositional analysis of LMWH, mainly enoxaparin. Areas covered: This review summarizes findings on mass spectrometry application for LMWH, including modulation of sulfates, using enzymology and sample preparation approaches. Furthermore, popular open-source software packages for automated spectral data interpretation are also discussed. Successful use of LC/MS can decipher structural composition for LMWH and help evaluate their sameness or biosimilarity with the innovator molecule. Overall, the literature has been searched using PubMed by typing various search queries such as 'enoxaparin', 'mass spectrometry', 'low molecular weight heparin', 'structural characterization', etc. Expert commentary: This section highlights clinically relevant areas that need improvement to achieve satisfactory commercialization of LMWHs. It also primarily emphasizes the advancements in instrumentation related to mass spectrometry, and discusses building automated software for data interpretation and analysis.

Thromboelastometry versus free-oscillation rheometry and enoxaparin versus tinzaparin: an in-vitro study comparing two viscoelastic haemostatic tests' dose-responses to two low molecular weight heparins at the time of withdrawing epidural catheters from ten patients after major surgery

Background

Monitoring low molecular weight heparins (LMWH’s) in the perioperative period is prudent in patients at high risk of coagulative complications, especially when the patient has an epidural catheter requiring withdrawal, which is associated with the risk of spinal haematoma. The aim of this study was to evaluate the in vitro dose-responses of two different LMWH’s on two different viscoelastic haemostatic tests, using blood sampled from patients with normal routine coagulation parameters, on the day after major surgery when their epidural catheters were due to be withdrawn.

Methods

Enoxaparin or tinzaparin were added in vitro to blood from ten patients who had undergone oesophageal resection, to obtain plasma concentrations of approximately 0, 0.5, 1.0 and 1.5 IU/mL. Coagulation was monitored using thromboelastometry (ROTEM®) using the InTEM® activating reagent; and free oscillation rheometry (FOR: ReoRox®), activated using thromboplastin. Clot initiation was measured using ROTEM-CT, ReoRox-COT1 and ReoRox–COT2. Clot propagation was measured using ROTEM-CFT, ROTEM-Alpha Angle and ReoRox-Slope. Clot stability was measured using ROTEM-MCF and ReoRox-G’max, and clot lysis was measured using ROTEM-ML and ReoRox-ClotSR.

Results

Clot initiation time assessed by thromboelastometry and FOR was prolonged by increasing concentrations of both LMWH’s (P < 0.01). Equivalent doses of tinzaparin in international units (anti-FXa units) per millilitre prolonged clot initiation more than enoxaparin (P < 0.05). There was significant inter-individual variation – the ranges of CT and COT1 at LMWH-concentrations of 0 and 1.5 IU/mL overlapped. None of the tests reflecting clot formation rate or stability showed a dose–response to either LMWH but clot lysis showed a tentative negative dose–response to the LMWH’s.

Conclusions

Clot initiation time’s dose-dependent prolongation by LMWH’s in this study agrees with previous research, as does tinzaparin’s stronger anti-coagulative effect than enoxaparin at equivalent levels of anti-FXa activity. This casts doubt on the validity of using anti-FXa assays alone to guide dosage of LMWH’s. The significant inter-individual variation in dose–response suggests that the relationship between dose and effect in the postoperative period is complicated. While both ROTEM and FOR may have some role in postoperative monitoring, more research is needed before any conclusion can be made about their clinical usefulness.

Electronic supplementary material

The online version of this article (doi:10.1186/s12871-015-0145-2) contains supplementary material, which is available to authorized users.

Endogenous glycosaminoglycan anticoagulation in extracorporeal membrane oxygenation

A heparin-like effect was recently described in infants, children, and adults receiving bivalirudin while supported on extracorporeal membrane oxygenation following cardiopulmonary bypass. This is most likely due to endogenous release of glycosaminoglycans from vascular endothelium and mast cells and is associated with longer duration of extracorporeal membrane oxygenation and an increased incidence of sepsis. Further investigation into this effect should include patients without recent cardiopulmonary bypass, exclude the presence of covalent antithrombin-heparin complexes, and employ a variety of different heparinases for thromboelastography. The phenomenon may partially explain the heterogeneity of anticoagulation requirements in patients on extracorporeal life support.

Surface modification of polydimethylsiloxane with a covalent antithrombin-heparin complex to prevent thrombosis

To prevent coagulation in contact with blood, polydimethylsiloxane (PDMS) was modified with an antithrombin-heparin (ATH) covalent complex using polyethylene glycol (PEG) as a linker/spacer. Using NHS chemistry, ATH was attached covalently to the distal chain end of the immobilized PEG linker. Surfaces were characterized by contact angle and X-ray photoelectron spectroscopy; attachment was confirmed by decrease in contact angles and an increase in nitrogen content as determined by X-ray photoelectron spectroscopy. Protein interactions in plasma were investigated using radiolabeled proteins added to plasma as tracers, and by immunoblotting of eluted proteins. Modification of PDMS with PEG alone was effective in reducing non-specific protein adsorption; attachment of ATH at the distal end of the PEG chains did not significantly affect protein resistance. It was shown that surfaces modified with ATH bound antithrombin selectively from plasma through the pentasaccharide sequence on the heparin moiety of ATH, indicating the ability of the ATH-modified surfaces to inhibit coagulation. Using thromboelastography, the effect of ATH modification on plasma coagulation was evaluated directly. It was found that initiation of coagulation was delayed and the time to clot was prolonged on PDMS modified with ATH/PEG compared to controls. For comparison, surfaces modified in a similar way with heparin were prepared and investigated using the same methods. The data suggest that the ATH-modified surfaces have superior anticoagulant properties compared to those modified with heparin.