Minimally Invasive Management of Implant-Supported Rehabilitation in the Posterior Maxilla, Part II. Surgical Techniques and Decision Tree

Maxillary sinus floor augmentation: a review of current evidence on anatomical factors and a decision tree

Maxillary sinus floor augmentation using lateral window and crestal technique is considered as predictable methods to increase the residual bone height; however, this surgery is commonly complicated by Schneiderian membrane perforation, which is closely related to anatomical factors. This article aimed to assess anatomical factors on successful augmentation procedures. After review of the current evidence on sinus augmentation techniques, anatomical factors related to the stretching potential of Schneiderian membrane were assessed and a decision tree for the rational choice of surgical approaches was proposed. Schneiderian membrane perforation might occur when local tension exceeds its stretching potential, which is closely related to anatomical variations of the maxillary sinus. Choice of a surgical approach and clinical outcomes are influenced by the stretching potential of Schneiderian membrane. In addition to the residual bone height, clinicians should also consider the stretching potential affected by the membrane health condition, the contours of the maxillary sinus, and the presence of antral septa when evaluating the choice of surgical approaches and clinical outcomes.

Minimally invasive techniques for lateral maxillary sinus floor elevation: small lateral window and one-stage surgery-a 2-5-year retrospective study

This study aimed to introduce a minimally invasive technique for maxillary sinus floor elevation using the lateral approach (lSFE) and to determine the factors that influence the stability of the grafted area in the sinus cavity. Thirty patients (30 implants) treated with lSFE using minimally invasive techniques from 2015 to 2019 were included in the study. Five aspects of the implant (central, mesial, distal, buccal, and palatal bone heights [BHs]) were measured using cone-beam computed tomography (CBCT) before implant surgery, immediately after surgery (T0), 6 months after surgery (T1), and at the last follow-up visit (T2). Patients' characteristics were collected. A small bone window (height, (4.40 ± 0.74) mm; length, (6.26 ± 1.03) mm) was prepared. No implant failed during the follow-up period (3.67 ± 1.75) years. Three of the 30 implants exhibited perforations. Changes in BH of the five aspects of implants showed strong correlations with each other and BH decreased dramatically before second-stage surgery. Residual bone height (RBH) did not significantly influence BH changes, whereas smoking status and type of bone graft materials were the potentially influential factors. During the approximate three-year observation period, lSFE with a minimally invasive technique demonstrated high implant survival rate and limited bone reduction in grafted area. In conclusion, lSFE using minimally invasive techniques was a viable treatment option. Patients who were nonsmokers and whose sinus cavity was filled with deproteinized bovine bone mineral (DBBM) had significantly limited bone resorption in grafted area.

Retrospective analysis of dental implants immediately placed in extraction sockets with periapical pathology: immediate implant placement in infected areas

BACKGROUND

The aim of this study is to examine the survival rates of immediate implants placed in extraction sockets with chronic periapical pathology.

METHODS

69 patients and 124 immediate implants were included in the study. The patients included in the study were examined in 3 groups. Group 1: Patients who underwent tooth extraction with periapical pathology and immediate implant placement. Group 2: patients who underwent tooth extraction with periapical pathology, immediate implant placement and guided bone regeneration. Group 3: Patients who underwent tooth extraction with periapical pathology, sinus lift procedure and immediate implant placement. In statistical analysis, t-test and Anova analysis were used in the evaluation of quantitative data, cross-tables and chi-square (χ2) test were used in the evaluation of classified qualitative data. Statistical significance was determined as p < 0.05.

RESULTS

It was observed that 116 (95.55%) of 124 implants were successful and 8 (4.45%) failed. The success rate was 97.2% in Group 1, 93.5% in Group 2 and 81.8% in Group 3. A significant correlation was found between the study groups and implant success in terms of χ2 test (p = 0.037). A significant relationship was found between smoking and success in terms of the χ2 test (p = 0.015).

CONCLUSIONS

High survival rates are observed for immediate implant placement in sockets with periapical pathology. The success rates observed in guided bone regenerations simultaneously with immediate implant placement are at satisfactory levels. In cases where simultaneous sinus lifting procedures are required, the success rates were observed to be significantly lower. In case of adequate curettage and debridement in sockets with periapical pathology, high implant survival rates are observed. As the complexity of the surgical procedure increases, treatment protocols may progress in safer ways.

Implant rehabilitation of a posterior maxilla with 4-mm long implants splinted to a 10-mm long implant in a patient with osteopenia taking antiresorptive drugs: A 5-year follow-up case report

The report describes the rehabilitation of a maxillary arch with limited bone volume in a 67-year-old female taking antiresorptives due to osteopenia. One 10-mm and two extra-short 4-mm implants were inserted, and implant-supported splinted crowns were fabricated. The 5-year follow-up showed stable bone levels, despite poor initial stability (ISQ: 14-51).

Clinical Effect and Aesthetic Evaluation of Minimally Invasive Implant Therapy

Objective

To explore the clinical effect and aesthetic evaluation of minimally invasive implant in the treatment of dentition defect.

Methods

From April 2020 to May 2021, 60 patients who received implant restoration were collected as the research objects. Randomly divided into minimally invasive surgery group (30 patients) and routine surgery group (30 patients). The postoperative antibiotic use time, pain disappearance time, swelling degree, and pain degree of the two groups were compared. Follow-up for one year, record and compare the success rate of implants and aesthetic evaluation of restoration between the two groups. The evaluation of patients' satisfaction with restoration was collected and compared.

Results

The operation time and antibiotic use time of patients in minimally invasive surgery group were significantly shorter than those in conventional surgery group, and the swelling degree rating was significantly better than that in conventional surgery group, with statistical significance (P < 0.05). The number of patients with no pain (0 degree) and mild pain (degree) in minimally invasive surgery group was significantly higher than that in routine surgery group, and the difference was statistically significant (P < 0.05). One year after the repair, the success rate of implants in minimally invasive surgery group was 100.00% compared with that in routine surgery group (93.33%), and the difference was not statistically significant (P > 0.05). The aesthetic effect scores of patients in minimally invasive surgery group were higher than those in routine surgery group in seven items: proximal gingival papilla, distal gingival papilla, labial gingival margin curvature, labial gingival margin height, root convexity, soft tissue color, and soft tissue texture, with statistical significance (P < 0.05). The satisfaction scores of the patients in minimally invasive surgery group in chewing function, comfort, aesthetics, retention function, and language function were higher than those in conventional surgery group, and the differences were statistically significant (P < 0.05).

Conclusion

Minimally invasive implant can achieve the same effect as conventional implant, and it has the advantages of lower postoperative swelling, shorter pain time, better aesthetic effect, and higher satisfaction after restoration.

Two-Step Progressive Transcrestal Sinus Augmentation Using a 4.5 mm Unloaded Implant as a "Temporary Implant" in Highly Atrophic Ridge: Case Report

Severe atrophic posterior maxillary ridge (residual bone height < 3 mm) could be a challenging situation to place dental implants. Several treatment options have been proposed, but some of them may require advanced surgical skills to achieve best results. In this article, we present a novel and easier technique to allow implant placing in localized areas of severe atrophy. In a first step, a 4.5-length extra-short (unloaded) implant is placed after a transcrestal maxillary sinus floor augmentation (MSFA). After the gained apical bone consolidation, this "temporary implant" is atraumatically removed and a longer and wider definitive implant is placed to support the definitive single restoration. The case of a 45-year-old female treated with this approach is also presented. The patient suffered a severe resorption in the upper right molar area after a tooth extraction. Four months after the "temporary implant" placement and MSFA grafting with plasma rich in growth factors and autologous bone, 3 mm of dense apical bone gain could be observed. In a second surgical time, the 4.5 mm-length "temporary implant" was removed, and a 5.5 mm-length "definitive implant" was placed. This second implant was placed in a denser type 1 (1,000 Hounsfield Unit) new formed apical bone. Four months later, the implant was loaded with a screw-retained crown over a transepithelial (intermediate abutment). After 1-year follow-up, the implant was in health and no mechanical or biological complications were noticed. The satisfactory results of this case encourage the realization of new studies to elucidate its reproducibility.

Predictors of peri-implant bone remodeling outcomes after the osteotome sinus floor elevation: a retrospective study

BACKGROUND

This study aimed to evaluate the radiographic outcomes of implants after osteotome sinus floor elevation (OSFE), and further identify the separate predictors for these radiographic outcomes.

METHODS

In this retrospective cohort study, a total of 187 implants were inserted into 138 patients using the OSFE technique. Seventy-four patients in the grafted group, and 64 patients in the non-grafted group completed this study. The vertical bone gain (VBG) and marginal bone loss (MBL) at 3 years following surgery were assessed as outcome variables. Based on extensive literature results, variables considered potential predictors of outcome variables included sex, age, tooth position, implant length, implant diameter, with or without grafting materials, residual bone height, sinus width, bone density, and sinus membrane thickness. Subsequently, the binary logistic regression analysis was applied with VBG and MBL as dependent variables, respectively. The receiver operating characteristic curve (ROC) with its area under the curve (AUC) was performed to further determine the predictive value of these predictors.

RESULTS

One hundred and six implants in grafted group and 81 implants in the non-grafted group were analyzed. The average VBG was 2.12 ± 1.94 mm for the grafted group and 0.44 ± 1.01 mm for the non-grafted group at 3 years (P < 0.05). The mean MBL was 1.54 ± 1.42 mm for the grafted group and 1.13 ± 1.69 mm for the non-grafted group at 3 years (P > 0.05). After the adjustment for confounders, logistic regression analysis demonstrated that implant length, grafting, residual bone height, and sinus membrane thickness were predictors of VBG. The odds ratio for VBG was 3.90, 4.04, 4.13 and 2.62, respectively. Furthermore, grafting exhibited the largest AUC at 0.80. While tooth position and implant length were predictors of MBL, the odds ratio for MBL was 3.27 and 7.85, respectively. Meanwhile, implant length exhibited the largest AUC at 0.72.

CONCLUSIONS

OSFE with or without simultaneous grafting materials both showed predictable clinical outcomes. Additionally, the present study is the first quantitative and significant verification that VBG has a significant association with sinus membrane thickness, as well as residual bone height, implant length and grafting. Whereas tooth position and implant length are markedly associated with MBL.

Limited marginal bone loss in implant-supported fixed full-arch rehabilitations after 5 years of follow-up

PURPOSE

The aim of the present study was to evaluate the 5-year results in terms of marginal bone level (MBL) around implants supporting fixed full-arch metal-ceramic restorations in a series of cases of patients who had lost their teeth in that dental arch because of severe periodontal disease.

MATERIAL AND METHODS

A retrospective cohort study was designed to evaluate the 5-year MBL results of OsseoSpeed™ Astra Tech TX implants with internal tapered conical connection. Age, gender, bone substratum, smoking habits, history of periodontitis, and prosthetic features were recorded. Mixed linear model was used to determine the influence of the different variables on MBL.

RESULTS

In this series, a total of 160 implants placed in 19 patients were evaluated. No implant failure was reported during the 5 years of follow-up. Only 14 (8.75%) implants had more than 2 mm of MBL. Abutment height, F(3,142) = 6.917, p < .001, and implant diameter, F(1,141) = 15.059, p < .001, were determined to be statistically associated with MBL. No other effect was significant. Pairwise comparisons showed that MBL was larger for abutment height = 1 (MBL = -0.987, SE = 0.186) compared with the remaining heights [-0.335 (0.171), -0.169 (0.192) and -0.247 (0.267), 2, 4 and 6 mm, respectively]. MBL was larger for narrow (-0.510, SE = 0.169) than for wide implants (-0.364, SE = 0.190).

CONCLUSION

The current study demonstrates that the vast majority of internal conical connection implants supporting fixed full-arch metal-ceramic restorations do not suffer from relevant MBL after 5 years in function. Particularly, those implants with transmucosal abutments longer than 2 mm show less than 0.5 mm from the implant shoulder to the marginal bone.

Minimal invasiveness in the transcrestal elevation of the maxillary sinus floor: A systematic review

In the attempt to reduce the invasiveness of a transcrestal sinus floor elevation procedure, different aspects must be considered; that is, the minimization of intra- and postsurgery morbidity, the reduction of treatment time, and the simplification/elimination of the reconstructive technology. Within this context, a systematic literature search was performed for controlled clinical trials evaluating the impact of one or more of these aspects on transcrestal sinus floor elevation invasiveness. Nineteen articles (15 studies) were included. Overall, the results confirmed that transcrestal sinus floor elevation is a minimally invasive and effective option for bone augmentation in the edentulous, atrophic posterior maxilla. By using powered instruments rather than manual osteotomes and hand mallet, the invasiveness of transcrestal sinus floor elevation can be further reduced without affecting its clinical effectiveness. To impact effectively on morbidity, the key elements to consider when selecting instruments for transcrestal sinus floor elevation are (a) their availability as a standardized sequence, to be adapted on predetermined residual bone height, and (b) the possibility to control pressure (eg, with screwable osteotomes) and/or instrument excursion (eg, with stop devices) to fracture the maxillary sinus floor. Among powered instruments, a standardized sequence of drills incorporating a trephine drill seem to be particularly indicated, due to reduced chair time, high tolerability for the patient, and the possibility to isolate a bone core to implement histomorphometric outcomes. At molar extraction sites with an interradicular septum characterized by a height of at least 4 mm, immediate transcrestal sinus floor elevation and implant placement can be considered a valid option to shorten treatment time.

Clinical and radiographic outcomes following transcrestal maxillary sinus floor elevation with injectable xenogenous bone substitute in gel form: a prospective multicenter study

Purpose

To investigate clinical and radiographic outcomes of transcrestal maxillary sinus floor elevation performed with an injectable xenograft in gel form, analyzing general, local and surgical variables possibly influencing the results.

Methods

Patients with residual crestal height < 5 mm underwent transcrestal sinus floor elevation with xenograft in gel form to allow the placement of a single implant. Simultaneous implant placement was performed when primary stability was ≥ 15 Ncm. Graft height was measured immediately after surgery (T0) and after 6 months of healing (T1). Univariate and multivariate regression models were built to assess associations between clinical variables with implant survival and graft height at T1.

Results

71 patients underwent transcrestal sinus floor elevation and 54 implants were simultaneously placed. Delayed implant placement (at T1) was possible in 5 cases out of 17 (29.4%), whereas in 12 patients (70.6%) implant insertion was not possible or required additional sinus grafting. Implant survival rate, with a follow-up varying from 12 to 32 months after loading, was 100%. Mean pre-operative bone height was 3.8 ± 1.0 mm, at T0 was 13.9 ± 2.2 mm and at T1 was 9.9 ± 2.8 mm. Bone height at T1 was negatively influenced by membrane perforation at surgery (p = 0.004) and positively influenced by immediate implant insertion (p < 0.001).

Conclusions

Transcrestal sinus floor elevation performed with injectable xenograft gel resulted in 100% implant survival rate. However, immediate implant insertion seems a crucial factor to preserve vertical bone gain: one-stage technique seems to be the most predictable approach to optimize clinical outcomes with this approach.

Trial registration clinicaltrials.gov, NCT05305521. Registered 31 March 2022—Retrospectively registered, https://clinicaltrials.gov/ct2/show/NCT05305521.

Intraoperative complications and early implant failure after transcrestal sinus floor elevation with residual bone height ≤5 mm: A retrospective multicenter study

OBJECTIVE

Clinical indications for maxillary sinus floor elevation with transcrestal techniques have increased in recent years even in sites with minimal residual bone height (RBH). Nevertheless, limited information is currently available on incidence of intraoperative complications and early implant failure in these cases.

MATERIAL AND METHODS

This retrospective multicenter study was performed on anonymized clinical and radiographic records of patients who underwent transcrestal sinus floor elevation in seven clinical centers. Influence of different factors related to patient, sinus anatomy and surgical technique on the incidence of intraoperative complications and early implant failure rate after transcrestal sinus lift were investigated.

RESULTS

A total of 430 patients treated with transcrestal sinus floor elevation for single implant insertion in sites with RBH ≤5 mm were included in the final analysis. After one year of loading, 418 implants out of 430 were satisfactorily in function. Early implant failure was recorded in 12 cases (2.8%), resulting significantly associated with the presence of large sinus cavities and with the occurrence of membrane perforation. The following adverse events were recorded: membrane perforation (7.2%), acute sinusitis (0.9%), implant displacement into the sinus cavity (0.7%), oro-antral fistula (0.2%) and benign paroxysmal positional vertigo (0.5% of osteotome cases). A strong direct correlation between sinus membrane perforation and bucco-palatal sinus width (p=0.000) was demonstrated.

CONCLUSIONS

Early implant failure after transcrestal sinus elevation showed significant direct correlation with bucco-palatal maxillary sinus width and the presence of membrane perforation. Sinus membrane perforation was strongly associated with bucco-palatal sinus width (extremely low perforation rate in narrow and much higher incidence in wide sinuses).

Does new bone formation vary in different sites within the same maxillary sinus after lateral augmentation? A prospective histomorphometric study

OBJECTIVE

The aim of this study was to evaluate histomorphometric outcomes of lateral maxillary sinus augmentation in different areas of the same cavity and to correlate results to bucco-palatal sinus width (SW) and residual bone height (RBH).

MATERIAL AND METHODS

Patients needing maxillary sinus floor elevation (RBH <5 mm) to insert two nonadjacent implants were treated with lateral augmentation using a composite graft. Six months later, two bone-core biopsies (mesial/distal) were retrieved in implant insertion sites. SW and RBH were measured on cone beam computed tomography, and correlations between histomorphometric and anatomical parameters were evaluated by multivariate linear regression analysis.

RESULTS

Twenty patients underwent sinus augmentation, and eighteen were included in the final analysis (two dropouts for membrane perforation). Mean newly formed mineralized tissue percentage (%NFMT) after 6 months in mesial and distal sites was 17.5 ± 4.7 and 11.6 ± 4.7, respectively (p = .0004). Multivariate linear regression showed a strong negative correlation between SW and %NFMT (β coefficient=-.774, p < .0001) and no correlation between RBH and %NFMT (β coefficient =-.038, p = .825).

CONCLUSIONS

The present study confirms that %NFMT after lateral sinus augmentation occurs at different rates in different anatomical areas of the same maxillary sinus, showing a strong negative correlation with SW, whereas no influence of RBH was observed. Clinicians should regard SW as a guide for graft selection and to decide duration of the healing period. Researchers should consider SW as a predictor variable, when comparing regenerative outcomes of different biomaterials by using maxillary sinus as an experimental model.

Clearance of Bone Substitute in Gel Form Accidentally Dispersed into the Sinus Cavity during Transcrestal Maxillary Sinus Floor Elevation: Two-Case Report

Sinus membrane perforation is the most frequent intraoperative complication occurring during maxillary sinus floor elevation. Although numerous techniques for perforation management are present, grafting material dissemination may still occur, representing a potential trigger factor leading to acute or chronic sinusitis. This case report describes two cases of xenogeneic bone substitute in gel form accidentally dispersed into the sinus cavity during maxillary sinus floor elevation with a transcrestal approach. In both cases, immediately postoperative radiographic imaging showed an important amount of gel graft dislodged into the sinus cavity as a consequence of hidden perforations that remained undetected during surgery. Patients were monitored for 6 months after surgery and reported no signs or symptoms related to possible sinus disease. Control radiographs showed no sinus membrane hypertrophy and/or presence of residual disseminated gel, confirming complete clearance of the accidentally dispersed graft through the ostiomeatal complex. In order to minimize postoperative complications, bone substitutes in gel form could represent an interesting alternative to granular grafts for their easier clearance from the maxillary sinus cavity in case of accidental dissemination during sinus augmentation procedures.

Radiographic and Histomorphometric Evaluation of Biomaterials Used for Lateral Sinus Augmentation: A Systematic Review on the Effect of Residual Bone Height and Vertical Graft Size on New Bone Formation and Graft Shrinkage

The aim of the present systematic review was to investigate the effect of residual bone height (RBH) and vertical bone gain on new bone formation (NBF) and graft shrinkage after lateral sinus lifts using different biomaterials.

METHODS

An electronic search was conducted on three databases to identify randomized controlled trials (RCTs) published until January 2021 with at least one follow-up at 6 months and at least five patients treated, comparing biomaterials used for maxillary sinus augmentation with a lateral approach. Graft volumetric changes, RBH, vertical bone gain, implant failure, and post-operative complications were evaluated. The risk of bias was assessed using the Cochrane tool.

RESULTS

We used 4010 identified studies, of which 21 were RCTs. Overall, 412 patients and 533 sinuses were evaluated. Only three publications had an overall low risk of bias. After 6 months, xenograft (XG) showed the least volume reduction (7.30 ± 15.49%), while autogenous graft (AU) was the most reabsorbed (41.71 ± 12.63%). NBF appeared to not be directly correlated with RBH; on the contrary, the overall linear regression analysis showed that NBF significantly decreased by 1.6% for each mm of postoperative vertical graft gain. This finding suggests that the greater the augmentation, the lower the NBF. A similar tendency, with a regression coefficient even higher than the overall one, was also observed with alloplast (AP) and XG.

CONCLUSIONS

The present results suggested that NBF was essentially independent of preoperative bone height. On the contrary, the smaller the volume was of the graft placed, the higher the amount of new bone formed, and the smaller the graft shrinkage was. Minimizing the augmentation volume might be beneficial to graft healing and stability especially when using AP and XG.

Can Bone Compaction Improve Primary Implant Stability? An In Vitro Comparative Study with Osseodensification Technique

Background: This study aims to analyze bone compaction and osseodensification techniques and to investigate how cancellous bone compaction could influence primary implant stability (PS). Methods: Two different surgical protocols (bone compactors—BC; osseodensification drills—OD) were compared by placing 20 implants into 20 fresh pig ribs for each procedure. Peak insertion torque (PIT) and peak removal torque (PRT) were investigated using an MGT-12 digital torque gauge, and implant stability quotient (ISQ) was analyzed using an Osstell® Beacon device. Results: Analysis of our data (T-test p < 0.05) evidenced no statistically significant difference between BC and OD in terms of PIT (p = 0.33) or ISQ (p = 0.97). The comparison of PRT values showed a statistically significant difference between BC and OD protocols (p = 0.009). Conclusions: Cancellous bone compaction seems to improve PS, preserving a significant amount of bone and evenly spreading trabeculae on the entire implant site. While the PIT and ISQ values obtained are similar, the PRT values suggest different physical responses from the surrounding bone tissue. Nevertheless, a larger sample and further in vivo studies are necessary to validate the usefulness of BC protocol in several clinical settings.

Factors influencing the prevalence of peri-implantitis in implants inserted in augmented maxillary sinuses: A multicenter cross-sectional study

BACKGROUND

Peri-implantitis is widely recognized as a major cause of late implant failure, both in pristine and regenerated bone. The present study aims to evaluate the prevalence of peri-implantitis in implants inserted in augmented maxillary sinuses and to analyze possible risk factors.

METHODS

A cross-sectional study was conducted in four centers including patients who underwent lateral or transcrestal sinus augmentation and received dental implants. Clinical and anamnestic data were collected using a standardized form. Univariate and multivariate logistic regression analyses have been performed for both implant-level and patient-level variables. Subsequently, a multilevel logistic mixed-effect model was built to analyze variables correlated with the occurrence of peri-implantitis.

RESULTS

A total of 156 patients (61 males and 95 females; mean age: 60.9 ± 11.6 years) with 315 implants inserted into augmented maxillary sinuses with a follow-up ranging from 1 to 18 years were evaluated. Seven implants in seven patients were previously lost for peri-implantitis (2.2% and 4.5% at implant- and patient-level, respectively); 250 implants showed no signs of peri-implant diseases (79.4%), 34 implants presented mucositis (10.8%), and 24 implants exhibited peri-implantitis (7.6%). Corresponding data evaluated at patient-level were 125 (80.1%), 17 (10.9%), and 14 (9.0%), respectively. At the multilevel analysis, history of periodontitis, sinus elevation with lateral approach, and one-stage sinus floor elevation significantly correlated with the occurrence of peri-implantitis (P <0.001).

CONCLUSIONS

History of periodontitis confirmed its well-known role as a risk factor for peri-implant pathologies. In addition, both lateral window technique and one-stage sinus floor elevation seemed to represent significant risk factors for peri-implantitis.

Wedge-Shaped Implants for Minimally Invasive Treatment of Narrow Ridges: A Multicenter Prospective Cohort Study

The present study aims to investigate clinical and patient-centered outcomes after the implant-supported rehabilitation of narrow ridges using a novel wedge-shaped implant. Forty-four patients were treated with the insertion of 59 tissue-level wedge implants (1.8 mm bucco-lingual width) in horizontally atrophic ridges (mean bone width 3.8 ± 0.4 mm). The main outcome measures were: implant stability quotient (ISQ), marginal bone loss (MBL) and patient morbidity. Fifty-eight implants were functioning satisfactorily after one year of loading (98.3% survival rate). ISQ values measured in the mesio-distal direction resulted significantly higher than those in the bucco-lingual direction at all time points (p < 0.001). Both mesio-distal and bucco-lingual ISQ values at 6-month follow-up resulted significantly higher than at 4-month follow-up (p < 0.001 for both). Mean MBL was 0.38 ± 0.48 mm at prosthesis delivery (6 months after implant insertion) and 0.60 ± 0.52 mm after one year of functional loading. The majority of patients reported slight discomfort related to the surgical procedure. Postoperative pain score was classified as mild pain on the day of surgery and the first postoperative day and no pain over the following five days. Within the limitations of the present study, the device investigated showed low morbidity and positive short-term clinical results in narrow ridges treatment.

The Effectiveness of Chlorhexidine and Air Polishing System in the Treatment of Candida albicans Infected Dental Implants: An Experimental In Vitro Study

Background: Peri-implantitis is an inflammatory disease with an increasing diffusion rate which can affect the long-term survival of a prosthetic rehabilitation. The present study focused on the decontaminating efficacy of chlorhexidine and air polishing system with sodium bicarbonate powder against Candida albicans, a microorganism which seems to have a superinfecting opportunistic role in the pathology. The aim of the authors was to investigate and compare the effectiveness of these treatments, commonly used in clinical practice. Methods: An in vitro study was conducted to analyze the effects of two widely used therapeutic aids for the disinfection of affected titanium implants: chlorhexidine (CHX) and air polishing with sodium bicarbonate powder (P). A qualitative and quantitative comparative analysis of the residual biofilm was carried out using a colorimetric assay (XTT) and scanning electron microscopy (SEM) observation. The experiment was conducted both on machined titanium surfaces and on rough sandblasted ones with the aim of bringing out differences in the therapeutic outcomes concerning the superficial texture of the implant. The null hypothesis was that no difference could be detected between the samples, regarding both the treatments performed and the nano-structural features of titanium. Results: The best results (on both types of implant surfaces) were obtained when combining the use of chlorhexidine and air polishing (C + P). A linear decrease in the optical density (OD) values recorded at three different time points (30 s, 1 min, 5 min) was also observed passing from the first to the last one. When observed under scanning electron microscope rough surfaces showed an extensive and highly structured biofilm, more complex if compared to the one encountered when analyzing machined implants. Conclusions: the present pilot study showed that rough surfaces can promote fungal adhesion and eventually hinder the outcome of a decontaminating treatment. For this purpose, the physio-chemical technique is always more efficient if compared to a single-technique approach regardless of the surface characteristics.