Lesion Index Titration Using Contact-Force Technology Enables Safe and Effective Radiofrequency Lesion Creation at the Root of the Aorta and Pulmonary Artery

Distribution of excitation recoverable myocardium after radiofrequency ablation and its relation to energy application time and irrigation

INTRODUCTION

Radiofrequency (RF) catheter ablation induces excitation recoverable myocardium around durable core lesions, and its distribution may be different depending on energy delivery methods.

METHODS AND RESULTS

In coronary perfusing porcine hearts, pacing threshold through the ventricle was measured using eight-pole (1-mm distance) needle electrodes vertically inserted into myocardium before, within 3 min after and 40 min after 40 W ablation with 10-g catheter contact (Group 1: irrigation catheter for 15 s, Group 2: irrigation catheter for 40 s, Group 3: nonirrigation catheter for 15 s, Group 4: nonirrigation catheter for 40 s). Ablation was accomplished in all 12 ablations in Groups 1-3 whereas in 8/12 ablations in Group 4 because of high-temperature rise. Within 3 min after ablation, 10.0 V pacing uncaptured electrodes were distributed from the surface to inside the myocardium, and its depth was deeper in 40 s than in 15 s ablation. 40 min after ablation, excitation recovery at one or more electrodes below the durable lesion was observed in all Groups. Excitation recovery electrodes were also observed on the surface in Group 1 but not the other Groups. Accordingly, the number of excitation-recovered electrodes were larger in Group 1 than the other Groups.

CONCLUSIONS

Regardless of the ablation methods, excitation recoverable myocardium was present around 1.0 mm below the durable lesions. Lesions created by short application time using an irrigation catheter may have included large excitation recoverable myocardium soon after ablation because of the presence of reversible myocardium on well-irrigated myocardial surfaces.

Impedance-decline-guide power control long application time bipolar radiofrequency catheter ablation

INTRODUCTION

Bipolar (BIP) radiofrequency (RF) ablation creates deep myocardial lesions but ideal energy application modes to treat ventricular arrhythmias originating from deep inside the thick myocardium have not been well established. An experimental study was performed to clarify whether high power and long application time BIP ablation were performable by impedance-decline-guide power control (PC) and whether it could create transmural lesions in the thick ventricle with a minimum risk of steam-pop.

METHODS AND RESULTS

Perfused porcine ventricle (18.4 ± 2.3 mm) was placed in an experimental bath and BIP ablation (50 W) for 120 s was attempted with catheter contact of 30-g using two protocols; fixed power (FP) and impedance-decline-guide PC. In the latter protocol, BIP ablation was started from 50 W, while the energy was decreased to 40-20 W according to the impedance decline during RF ablation. FP ablation was attempted in 30 applications and the transmural lesion was created in all 30, although steam-pop occurred in 16/30 applications (53%). Low minimum impedance, large total impedance decline (TID), and %-TID were associated with the steam-pop occurrence. PC ablation was attempted in another 21 applications, and the transmural lesion was created in all 21 without steam-pop. PC ablation was superior to FP ablation (21/21 vs. 14/30, p < .001) in the creation of a transmural lesion without resulting in steam-pop.

CONCLUSIONS

High power and long application time BIP ablation seems to be feasible according to the impedance-decline-guide approach, which could create transmural lesions in thick porcine ventricles with minimal risk of steam-pop.

Electro-characteristics of Myocardial Pouches and Reduction of the Frequency of Steam Pops During Radiofrequency Ablation

Background: Radiofrequency ablation (RFA) effectively treats arrhythmia. Steam pop (SP) is a dangerous complication of RFA, which can lead to pericardial tamponade or even death.

Objective: This study aimed to explore the electro-characteristics of myocardial pouches, and the relationship between SP, pouch, and impedance.

Methods: Swine myocardium was divided into the pouch group and smooth myocardium group. Continuous RFA at 50 W was applied. The initial impedance reduction within the first 3 s of ablation and the time from the start of ablation to SP were recorded. After enabling the delta impedance cutoff function, RFA was performed at different percentage of delta impedance (PDI) cutoff thresholds.

Results: The impedance was higher for the pouch myocardium compared to the smooth myocardium (123.22 ± 8.63 Ω and 95.75 ± 4.75 Ω, respectively; p < 0.001). The RFA duration before SPs was shorter in the pouch group compared to the smooth myocardium group [9 s (interquartile range, IQR: 6.25–13 s) and 33 s (IQR: 26.25–40.75 s), respectively; p < 0.001]. Within the first 3 s of RFA, impedance reduction (24.65 ± 6.57 Ω and 12.78 ± 3.35 Ω, respectively; p < 0.001) and PDI [19.18% (IQR: 16.39–24.20%) and 12.96% (IQR: 11.17–14.39%), respectively; p < 0.001] were greater in the pouch group compared to the smooth myocardium group. A PDI of 15% and delta time of 3 s effectively reduced the frequency of SPs without seriously affecting RFA use.

Conclusion: SPs occur more frequently in the pouch area during RFA. Appropriate delta impedance cutoff settings (PDI: 15%; delta time: 3 s) can reduce the frequency of SPs and improve the RFA safety.

Impedance decrement indexes for avoiding steam-pop during bipolar radiofrequency ablation: An experimental study using a dual-bath preparation

INTRODUCTION

This experimental study was conducted to explore impedance monitoring for safely performing bipolar (BIP) radiofrequency (RF) ablation targeted to arrhythmia focus.

METHODS AND RESULTS

Using a newly designed dual-bath experimental model, contact-force-controlled (20-g) BIP ablation (50 W, 60 s) was attempted for porcine left ventricle (17.0 ± 2.7 mm thickness). BIP ablation was successfully accomplished for 60 s in 75 of the 89 RF applications (84.3%), whereas audible steam-pop occurred in the other 14 RF applications (15.7%). Receiver operating characteristic analysis demonstrated the optimal predictive values regarding the occurrence of steam-pop as follows; thinner myocardial wall (≤14.8 mm), low minimum impedance (≤89 ohm), greater total impedance decrement (TID) (≤ -25 ohm) and %TID (≤ -22.5%). Greater impedance decrement was not observed immediately preceding the occurrence of steam-pop but appeared around 15 s before. Four steam-pops happened before reaching the optimal predictive values of minimum impedance, whereas all 14 steam-pops developed 11.5 ± 9.2 and 8.1 ± 8.1 s after reaching the optimal predictive values of TID and %TID, respectively. Total lesion depth (endocardial plus epicardial) was 10.7 ± 1.2 mm on average, and was well correlated with TID and %TID. Transmural lesion through the myocardial wall was created in 22 RF applications.

CONCLUSION

Relatively thinner areas of the myocardium are likely to be at greater risk for steam-pop during BIP RF ablation. Lowering the RF application energy to reduce the impedance decrement may help to lessen this risk.