Controlled release of macromolecules from a degradable polyanhydride matrix

Canonical and non-canonical barriers facing antimiR cancer therapeutics

Once considered genetic "oddities", microRNAs (miRNAs) are now recognized as key epigenetic regulators of numerous biological processes, including some with a causal link to the pathogenesis, maintenance, and treatment of cancer. The crux of small RNA-based therapeutics lies in the antagonism of potent cellular targets; the main shortcoming of the field in general, lies in ineffective delivery. Inhibition of oncogenic miRNAs is a relatively nascent therapeutic concept, but as with predecessor RNA-based therapies, success hinges on delivery efficacy. This review will describes the canonical (e.g. pharmacokinetics and clearance, cellular uptake, endosome escape, etc.) and non-canonical (e.g. spatial localization and accessibility of miRNA, technical limitations of miRNA inhibition, off-target impacts, etc.) challenges to the delivery of antisense-based anti-miRNA therapeutics (i.e. antimiRs) for the treatment of cancer. Emphasis will be placed on how the current leading antimiR platforms-ranging from naked chemically modified oligonucleotides to nanoscale delivery vehicles-are affected by and overcome these barriers. The perplexity of antimiR delivery presents both engineering and biological hurdles that must be overcome in order to capitalize on the extensive pharmacological benefits of antagonizing tumor-associated miRNAs.

Controlled protein release from monodisperse biodegradable double-wall microspheres of controllable shell thickness

Biodegradable polymer microparticles are promising delivery depots for protein therapeutics due to their relatively simple fabrication and facile administration. Double-wall microspheres (DWMS) comprising a core and shell made of two distinct polymers may provide enhanced control of the drug release profiles. Using precision particle fabrication (PPF) technology, monodisperse DWMS were fabricated with model protein bovine serum albumin (BSA)-loaded poly(lactide-co-glycolide) (PLG) core and drug-free poly(d,l-lactic acid) (PDLL) shell of uniform thickness. Monolithic single-wall microspheres were also fabricated to mimic the BSA-loaded PLG core. Using ethyl acetate and dichloromethane as shell- and core-phase solvents, respectively, BSA was encapsulated selectively in the core region within DWMS with higher loading and encapsulation efficiency compared to using dichloromethane as core and shell solvents. BSA in vitro release rates were retarded by the presence of the drug-free PDLL shell. Moreover, increasing PDLL shell thickness resulted in decreasing BSA release rate. With a 14-μm thick PDLL shell, an extended period of constant-rate release was achieved.

Protein encapsulation in and release from monodisperse double-wall polymer microspheres

Biodegradable polymer double-wall microspheres (DWMS) are promising vehicles for macromolecular therapeutics such as proteins and peptides. Using precision particle fabrication (PPF) technology, uniform DWMS with outer diameter approximately 55 μm were fabricated comprising poly(lactide-co-glycolide) cores encapsulating bovine serum albumin (BSA) and approximately 10 μm thick, drug-free, poly(lactic acid) (PLA) shells of varying PLA molecular weight. Also, monolithic single-wall microspheres (SWMS) were fabricated to mimic the BSA-loaded core. The use of relatively fast-extracting ethyl acetate and slowly extracting dichloromethane as shell- and core-phase solvents, respectively, was found to produce DWMS with well-defined core-shell structure, high BSA encapsulation efficiency, and the desired localization of protein in the particle core. Initial protein distribution, particle erosion, and in vitro protein release from DWMS and SWMS were examined. The presence of a BSA-free shell in DWMS decreased the protein release rate and extended the duration of release from approximately 50 days to 70-80 days, demonstrating the capacity of such DWMS to provide enhanced control of protein delivery rates.

Mechanism of drug release from double-walled PDLLA(PLGA) microspheres

The drug release and degradation behavior of two double-walled microsphere formulations consisting of a doxorubicin-loaded poly(d,l-lactic-co-glycolic acid) (PLGA) core (∼46 kDa) surrounded by a poly(d,l-lactic acid) (PDLLA) shell layer (∼55 and 116 kDa) were examined. It was postulated that different molecular weights of the shell layer could modulate the erosion of the outer coating and limit the occurrence of water penetration into the inner drug-loaded core on various time scales, and therefore control the drug release from the microspheres. For both microsphere formulations, the drug release profiles were observed to be similar. The degradation of the microspheres was monitored for a period of about nine weeks and analyzed using scanning electron microscopy, laser scanning confocal microscopy, and gel permeation chromatography. Interestingly, both microsphere formulations exhibited occurrence of bulk erosion of PDLLA on a similar time scale despite different PDLLA molecular weights forming the shell layer. The shell layer of the double-walled microspheres served as an effective diffusion barrier during the initial lag phase period and controlled the release rate of the hydrophilic drug independent of the molecular weight of the shell layer.

Salicylic acid-derived poly(anhydride-ester) electrospun fibers designed for regenerating the peripheral nervous system

Continuous biomaterial advances and the regenerating potential of the adult human peripheral nervous system offer great promise for restoring full function to innervated tissue following traumatic injury via synthetic nerve guidance conduits (NGCs). To most effectively facilitate nerve regeneration, a tissue engineering scaffold within a conduit must be similar to the linear microenvironment of the healthy nerve. To mimic the native nerve structure, aligned poly(lactic-co-glycolic acid)/bioactive polyanhydride fibrous substrates were fabricated through optimized electrospinning parameters with diameters of 600 ± 200 nm. Scanning electron microscopy images show fibers with a high degree of alignment. Schwann cells and dissociated rat dorsal root ganglia demonstrated elongated and healthy proliferation in a direction parallel to orientated electrospun fibers with significantly longer Schwann cell process length and neurite outgrowth when compared to randomly orientated fibers. Results suggest that an aligned polyanhydride fiber mat holds tremendous promise as a supplement scaffold for the interior of a degradable polymer NGC. Bioactive salicylic acid-based polyanhydride fibers are not limited to nerve regeneration and offer exciting promise for a wide variety of biomedical applications.

In vitro degradation of polyanhydride/polyester core-shell double-wall microspheres

Double-wall microspheres (DWMS), comprising distinct polymer core and shell phases, are useful and interesting for controlled-release drug delivery. In particular, the presence of a surface-eroding polymer core may be expected to limit water penetration and, therefore, delay degradation of the core phase and drug release. In this study, solid microspheres and DWMS were fabricated using a surface-eroding polymer (poly[1,6-bis(p-carboxyphenoxy)hexane]; PCPH) and a bulk-eroding polymer (poly(D,L-lactide-co-glycolide); PLG). Erosion of the particles was observed by optical and electron microscopy, while polymer degradation was followed by gel permeation chromatography, during incubation in buffer at 37 degrees C. Degradation and erosion were very different depending on which polymer formed the particle shell. Nevertheless, the relatively thin (approximately 5 microm) PCPH shells could not prevent water penetration, and the PLG cores completely eroded by 6 weeks of incubation.

Role of polyanhydrides as localized drug carriers

Many drugs that are administered in an unmodified form by conventional systemic routes fail to reach target organs in an effective concentration, or are not effective over a length of time due to a facile metabolism. Various types of targeting delivery systems and devices have been tried over a long period of time to overcome these problems. Targeted delivery or localized drug delivery offers an advantage of reduced body burden and systemic toxicity of the drugs, especially useful for highly toxic drugs like anticancer agents. Local drug delivery via polymer is a simple approach and hypothesized to avoid the above stated problems. Polyanhydrides are a unique class of polymer for drug delivery because some of them demonstrate a near zero order drug release and relatively rapid biodegradation in vivo. Further, the release rate of polyanhydride fabricated device can be altered over a thousand fold by simple changes in the polymer backbone. Hence, these are one of the best-suited polymers for drug delivery, with biodegradability and biocompatibility. The review focuses on the advantages of polyanhydride carriers in localized drug delivery along with their degradability behavior, toxicological profile and role in various disease conditions.

Effect of Postmolding Heat Treatment on In Vitro Properties of a Polyanhydride Implant Containing Gentamicin Sulfate

A polyanhydride implant containing gentamicin sulfate was fabricated using a laboratory-scale injection-molding machine. After injection molding, the implants were subject to heat treatment at 60 degrees C for various time periods with or without nitrogen protection. The impact of this heat treatment on the in vitro properties of the implants including copolymer molecular weights, mechanical properties, and in vitro drug-release profiles was investigated. This heat treatment caused a drastic drop in the molecular weight of the copolymer. Heating without nitrogen protection resulted in the hardening of the implant, but heating in the presence of nitrogen rendered the implant less rigid. It was also found that a faster in vitro drug release profile was shown by implants heated without nitrogen protection and a pronounced slowing down in drug release was exhibited by implants heated with nitrogen protection.

Poly(anhydride-ester) fibers: Role of copolymer composition on hydrolytic degradation and mechanical properties

Poly(anhydride-esters), based on carboxyphenoxydecanoate (CPD), are biocompatible polymers that hydrolytically degrade. The mechanical properties of the poly(anhydride-esters) can be altered by copolymerization with para-carboxyphenoxyhexane (pCPH). Mechanical properties of three CPD:pCPH compositions (30:70, 40:60, and 50:50) are reported as a function of hydrolytic degradation. The mechanical characteristics evaluated were tensile modulus at 1% strain (E(1%)), tensile strength (sigma(B)), ultimate elongation (epsilon(B)), and toughness (E(r)). The 30:70 CPD:pCPH fibers maintained higher values for tensile modulus at all time points than the two other fiber compositions. In addition, the 30:70 CPD:pCPH fibers maintained lower values for both tensile strength and toughness than the two other fiber compositions. These phenomena resulted from the brittle nature of pCPH, the major component of the 30:70 CPD:pCPH fibers; increasing the pCPH concentration in the polymer lowers both tensile strength and toughness of the polymer by decreasing ductility. With increasing amounts of pCPH, the hydrolytic degradation occurred more slowly, as reflected in the copolymers' improved ability to retain their mechanical properties. Therefore, copolymerization is useful for controlling the mechanical properties of the fibers as well as the polymer degradation rate, which ultimately determines the rate at which physically or chemically encapsulated drugs can be released.

Polyanhydrides: an overview

Polyanhydrides have been considered to be useful biomaterials as carriers of drugs to various organs of the human body such as brain, bone, blood vessels, and eyes. They can be prepared easily from available, low cost resources and can be manipulated to meet desirable characteristics. Polyanhydrides are biocompatible and degrade in vivo into non-toxic diacid counterparts that are eliminated from the body as metabolites. Owing to their usefulness, this review focuses on the development, synthesis methods, structures and characterization of polyanhydrides, which will provide an overview for the researchers in the field. Their in vitro and in vivo degradability, toxicity, biocompatibility and applications are discussed in the subsequent chapters of this special issue on polyanhydrides and poly(ortho esters).

Fabrication of PLG microspheres with precisely controlled and monodisperse size distributions

The size distribution of biodegradable polymer microspheres critically impacts the allowable routes of administration, biodistribution, and release rate of encapsulated compounds. We have developed a method for producing microspheres of precisely controlled and/or monodisperse size distributions. Our apparatus comprises spraying a polymer-containing solution through a nozzle with (i) acoustic excitation to produce uniform droplets, and (ii) an annular, non-solvent carrier stream allowing further control of the droplet size. We used this apparatus to fabricate poly(D,L-lactide-co-glycolide) (PLG) spheres. The acoustic excitation method, by itself, produced uniform microspheres as small as 30 microm in diameter in which > or =95% of the spheres were within 1.0-1.5 microm of the average. The carrier stream method alone allowed production of spheres as small as approximately 1-2 microm in diameter from a 100-microm diameter nozzle, but generated broader size distributions. By combining the two devices, we fabricated very uniform spheres with average diameters from approximately 5 to >500 microm. Furthermore, by discretely or continuously varying the experimental parameters, we fabricated microsphere populations with predefined size distributions. Finally, we demonstrate encapsulation and in vitro release of a model drug compound, rhodamine B. In summary, our apparatus provides unprecedented control of microsphere size and may allow development of advanced controlled-release delivery systems.

FTIR-ATR spectroscopy for monitoring polyanhydride/anhydride-amine reactions

The reactivity of 1,3-bis(p-carboxyphenoxy) propane:sebacic acid anhydride copolymer (CPPSA1:6), myristic and benzoic anhydrides with amine nucleophiles were investigated in non-polar solvents. FTIR-ATR (attenuated total reflectance) spectroscopy was used to monitor the polyanhydride/anhydride reaction rates in dichloromethane, dichloroethane, chloroform, and 1,4-dioxane solutions at room temperature. The reaction kinetics was determined by measuring the anhydride peak loss with time. Aminolysis resulted from nucleophilic attack of the added amine on the carbonyl group of the anhydride moiety. Primary and secondary amines reacted to form amides and the reaction followed second-order kinetics. Second-order rate constants and reaction half-life (t(1/2)) were calculated from the semilog plots of [anhydride]/[amine] in 1,4-dioxane at room temperature. The aminolysis rate decreased with pK(a) of the amine reactant, and half-life (t(1/2)) decreased with increasing amine concentration, as expected. With trifluoroethylamine (pK(a) 5.8), myristic anhydride reacted about 6-fold faster than benzoic anhydride. The lower reaction rate of benzoic anhydride was due to the higher stability of the aromatic anhydride compared to aliphatic. The overall CPPSA1:6 copolymer reactivity was the sum of aliphatic-aliphatic (SA-SA), aliphatic-aromatic (SA-CPP), and aromatic-aromatic (CPP-CPP) anhydride linkage reactivities. Based on the monomer ratio, the probability of SA-SA, SA-CPP, and CPP-CPP dyads were calculated to be 0.74, 0.24, and 0.02, respectively. This indicated that CPPSA1:6 reactivity will mainly result from SA-SA and SA-CPP linkages. The second-order rate constants and t(1/2) obtained for CPPSA1:6 with TFEA were closer to those for myristic anhydride than benzoic anhydride with TFEA.