Synthesis and magnetic characterizations of La(1-x)Sr(x)MnO3 nanoparticles for biomedical applications

RF hyperthermia by encapsulated Fe3O4 nanoparticles induces cancer cell death via time-dependent caspase-3 activation

Aim: To explore the optimum temperature for cancer cell death using magnetic hyperthermia (MH), which in turn will affect the mode of cell death. Method: The focus of this study is to improve upon the existing methodology for the synthesis of chitosan encapsulated Fe3O4. MH was done at different temperatures. The cell death pathway was explored using flow cytometry and western blot. Results: Coated Fe3O4 exhibited low cytotoxicity, high stability and heating efficiency. MH at 43°C was the optimum temperature for robust cell death. Cell death pathway suggested that during the initial stages of recovery, apoptosis was the main mode of cell death. While at later stages, major apoptosis and minor necrosis were observed. Conclusion: It is important to find out the long-term effect of hyperthermia treatment on cancer cells and their consequences on surrounding healthy cells.

Research Progress in Rare Earth-Doped Perovskite Manganite Oxide Nanostructures

Perovskite manganites exhibit a broad range of structural, electronic, and magnetic properties, which are widely investigated since the discovery of the colossal magnetoresistance effect in 1994. As compared to the parent perovskite manganite oxides, rare earth-doped perovskite manganite oxides with a chemical composition of LnxA1-xMnO3 (where Ln represents rare earth metal elements such as La, Pr, Nd, A is divalent alkaline earth metal elements such as Ca, Sr, Ba) exhibit much diverse electrical properties due to that the rare earth doping leads to a change of valence states of manganese which plays a core role in the transport properties. There is not only the technological importance but also the need to understand the fundamental mechanisms behind the unusual magnetic and transport properties that attract enormous attention. Nowadays, with the rapid development of electronic devices toward integration and miniaturization, the feature sizes of the microelectronic devices based on rare earth-doped perovskite manganite are down-scaled into nanoscale dimensions. At nanoscale, various finite size effects in rare earth-doped perovskite manganite oxide nanostructures will lead to more interesting novel properties of this system. In recent years, much progress has been achieved on the rare earth-doped perovskite manganite oxide nanostructures after considerable experimental and theoretical efforts. This paper gives an overview of the state of art in the studies on the fabrication, structural characterization, physical properties, and functional applications of rare earth-doped perovskite manganite oxide nanostructures. Our review first starts with the short introduction of the research histories and the remarkable discoveries in the rare earth-doped perovskite manganites. In the second part, different methods for fabricating rare earth-doped perovskite manganite oxide nanostructures are summarized. Next, structural characterization and multifunctional properties of the rare earth-doped perovskite manganite oxide nanostructures are in-depth reviewed. In the following, potential applications of rare earth-doped perovskite manganite oxide nanostructures in the fields of magnetic memory devices and magnetic sensors, spintronic devices, solid oxide fuel cells, magnetic refrigeration, biomedicine, and catalysts are highlighted. Finally, this review concludes with some perspectives and challenges for the future researches of rare earth-doped perovskite manganite oxide nanostructures.

Recent advancements in manganite perovskites and spinel ferrite-based magnetic nanoparticles for biomedical theranostic applications

Recently, magnetic nanoparticles (MNPs) based on manganite perovskites (La_1-xSr_xMnO₃ or LSMO) and/or spinel ferrites (i.e. SPFs with the formula MFe₂O₄; M=Co, Mg, Mn, Ni and Zn and mixed SPFs (e.g. Co-Zn, Mg-Mn, Mn-Zn and/or Ni-Zn)) have garnered great interest in magnetic hyperthermia therapy (MHT) as heat-inducing agents due to their tuneable magnetic properties including Curie temperature (T _c) to generate controllable therapeutic temperatures (i.e. 42 °C-45 °C)-under the application of an alternating magnetic field (AMF)-for the treatment of cancer. In addition, these nanoparticles are also utilized in magnetic resonance imaging (MRI) as contrast-enhancing agents. However, the employment of the LSMO/SPF-based MNPs in these MHT/MRI applications is majorly influenced by their inherent properties, which are mainly tuned by the synthesis factors. Therefore, in this review article, we have systematically discussed the significant chemical methods used to synthesize the LSMO/SPF-based MNPs and their corresponding intrinsic physicochemical properties (size/shape/crystallinity/dispersibility) and/or magnetic properties (including saturation magnetization (M _s)/T _c). Then, we have analyzed the usage of these MNPs for the effective imaging of cancerous tumors via MRI. Finally, we have reviewed in detail the heating capability (in terms of specific absorption rate) of the LSMO/SPF-based MNPs under calorimetric/biological conditions for efficient cancer treatment via MHT. Herein, we have mainly considered the significant parameters-such as size, surface coating (nature and amount), stoichiometry, concentration and the applied AMFs (including amplitude (H) and frequency (f))-that influence the heat induction ability of these MNPs.

Studies on enhanced colloidal stability and heating ability of glycine functionalized LSMO nanoparticles for cancer hyperthermia therapy

The heating ability of glycine functionalized LSMO nanoparticles for cancer hyperthermia is measured in different physiological media.

Interplay between superparamagnetic and blocked behavior in an ensemble of lanthanum–strontium manganite nanoparticles

Magnetic nanoparticles constitute promising tools for addressing medical and health-related issues based on the possibility to obtain various kinds of responses triggered by safe remote stimuli.

Multimodal Superparamagnetic Nanoparticles with Unusually Enhanced Specific Absorption Rate for Synergetic Cancer Therapeutics and Magnetic Resonance Imaging

Superparamagnetic nanoparticles (SPMNPs) used for magnetic resonance imaging (MRI) and magnetic fluid hyperthermia (MFH) cancer therapy frequently face trade off between a high magnetization saturation and their good colloidal stability, high specific absorption rate (SAR), and most importantly biological compatibility. This necessitates the development of new nanomaterials, as MFH and MRI are considered to be one of the most promising combined noninvasive treatments. In the present study, we investigated polyethylene glycol (PEG) functionalized La1-xSrxMnO3 (LSMO) SPMNPs for efficient cancer hyperthermia therapy and MRI application. The superparamagnetic nanomaterial revealed excellent colloidal stability and biocompatibility. A high SAR of 390 W/g was observed due to higher colloidal stability leading to an increased Brownian and Neel's spin relaxation. Cell viability of PEG capped nanoparticles is up to 80% on different cell lines tested rigorously using different methods. PEG coating provided excellent hemocompatibility to human red blood cells as PEG functionalized SPMNPs reduced hemolysis efficiently compared to its uncoated counterpart. Magnetic fluid hyperthermia of SPMNPs resulted in cancer cell death up to 80%. Additionally, improved MRI characteristics were also observed for the PEG capped La1-xSrxMnO3 formulation in aqueous medium compared to the bare LSMO. Taken together, PEG capped SPMNPs can be useful for diagnosis, efficient magnetic fluid hyperthermia, and multimodal cancer treatment as the amphiphilicity of PEG can easily be utilized to encapsulate hydrophobic drugs.

Low temperature magnetic and transport properties of LSMO–PZT nanocomposites

(a) M–H curves of different nanocomposites (NCs) at 80 K. Left and right insets show M vs. H and dM/dH vs. H curves respectively; (b) Magneto-resistance (MR) vs. H curve of different NCs at 200 K. Inset figure shows MR vs. H curve for a typical NC at various temperatures.

Facile synthesis of multifunctional La1−xSrxMnO3@Au core–shell nanoparticles for biomedical applications

Multifunctional high-performance La_1−xSrxMnO₃@Au core–shell nanoparticles were synthesized by nanoemulsion with polymers, showing sharp Curie transition, excellent amphiphilic dispersibility and optical properties as well as biocompatibility.

Functionalization of La(0.7)Sr(0.3)MnO3 nanoparticles with polymer: studies on enhanced hyperthermia and biocompatibility properties for biomedical applications

Now-a-days surface functionalized La(0.7)Sr(0.3)MnO(3) (LSMO) nanoparticles by different biocompatible polymers are attracted considerable interest in various biomedical applications in general and magnetic fluid hyperthermia treatment of cancer in particular. In this paper La(0.7)Sr(0.3)MnO(3) nanoparticles are synthesized and functionalized with polymer (dextran, with mean particle size ~25 nm). Magnetic measurements of both coated and uncoated particles reveal the superparamagnetic nature at room temperature. The resulting coated particles form a stable suspension in an aqueous environment at physiological pH and possess a narrow hydrodynamic size distribution. In vitro cytotoxicity of the MNPs has been assessed under Trypan blue dye exclusion and MTT assay on HeLa and L929 cell lines. The results demonstrate that dextran functionalized nanoparticles have no significant effect on cell viability within the tested concentrations (0.2-1 mg/mL) as compared to bare LSMO. Magnetic fluid hyperthermia studies have been done in detail; the influence of an applied alternating current (AC) magnetic field on heat generation is presented in brief. Dextran functionalized LSMO has the higher Specific absorption rate (SAR) value than the bare LSMO. After functionalization with dextran the SAR values of LSMO nanoparticles increased from 25 to 51 W/g. The study shows that the rise in temperatures by these nanoparticles could be safely controlled around Curie temperature (T(c)).

Polyvinyl alcohol: an efficient fuel for synthesis of superparamagnetic LSMO nanoparticles for biomedical application

La(0.7)Sr(0.3)MnO(3) (LSMO) nanoparticles have been prepared using glycine and polyvinyl alcohol (PVA) as fuels. Their crystal structure, particle morphology and compositions are characterized using X-ray diffraction, transmission electron microscopy, field-emission electron microscopy and energy dispersive analysis of X-ray. They show a pseudo-cubic perovskite structure. The spherical particle sizes of 30 and 20 nm have been obtained from samples prepared by glycine and PVA respectively. The field cooled (FC) and zero field cooled (ZFC) magnetizations have been recorded from 5 to 375 K at 500 Oe and superparamagnetic blocking temperatures (T(B)) of 75 and 30 K are obtained from samples prepared by glycine and PVA respectively. Particle size distribution is observed from dynamic light scattering measurements. Dispersion stability of the particles in water is studied by measuring the Zeta potential with varying the pH of the medium from 1 to 12. Under induction heating experiments, a hyperthermia temperature (42-43 °C) is achieved by both the samples (3-6 mg mL(-1)) at magnetic fields of 167-335 Oe and at a frequency of 267 kHz. The bio-compatibility of the LSMO nanoparticles is studied on the L929 and HeLa cell lines by MTT assay for up to 48 h. The present work reveals the importance of synthesis technique and fuel choice on structural, morphological, magnetic, hyperthermia and biocompatible properties of LSMO and predicts the suitability for biomedical applications.