Promotion effect of Pd on TiO2 for visible light photocatalytic degradation of gaseous formaldehyde

Construction of functionalized In-based metal organic framework/BiOCl1-xIx Z-scheme heterojunction for efficient photocatalytic degradation of tetracycline: Performance and mechanism

The environmental implications of antibiotics have drawn widespread attention. Numerous monomer-based bismuth oxide halide catalysts have been extensively studied to remove tetracycline (TC) from aquatic environments. Integrating bismuth oxide halide composites with In-based metal organic framework (NH2-MIL-68(In)) might potentially serve as a novel strategy. By meticulously adjusting Cl and I within the composite bismuth halide oxide (B-x), a suite of purpose built heterojunctions (NMB-x) were synthesized, which were engineered to facilitate the efficient photodegradation of TC in simulated and actual aquatic environments. The incorporation of Z-scheme heterojunctions yielded a significant enhancement in photocatalytic responsiveness and charge carrier separation. Notably, NMB-0.3 demonstrated remarkable TC removal efficiency of 88.52 ± 3.05%, which is 3.74 times of B-0.3 within 90 min. The apparent quantum yield was also increased from 8.97% (B-0.3) to 19.68% (NMB-0.3). The removal of TC from natural water bodies was also assessed. Moreover, the photocatalyst concentration, assessed using response surface method, was found to show influential factors on TC removal. In addition, density functional theory (DFT) simulations were employed to identify vulnerable sites within TC. Intermediates and pathways in the photodegradation of TC have also been inferred. Furthermore, a comprehensive environmental toxicity assessment of representative intermediates demonstrated that these intermediates exhibited significantly reduced environmental toxicity compared to TC. This study provides a new approach to the design strategy of efficient and environmentally friendly MOF-based photocatalysts.

Improving bioelectrochemical performance by sulfur-doped titanium dioxide cooperated with Zirconium based metal-organic framework (S-TiO2@MOF-808) as cathode in microbial fuel cells

The sulfur-doped titanium dioxide (S-TiO2) cooperated with Zirconium based on a kind of metal-organic framework (MOF-808) was successfully prepared as cathode catalyst (S-TiO2@MOF-808) of microbial fuel cell (MFC) by two-step hydrothermal reaction. The particle size was approximately 5 μm, and the spherical S-TiO2 particle was attached to the surface of MOF-808 as irregular block solid. Zr-O, C-O and O-H bond were indicated to exist in S-TiO2@MOF-808. When n (Zr4+): n(Ti4+) was 1: 5, S-TiO2@MOF-808 showed better oxygen reduction reaction (ORR). The introduction of S-TiO2 restrained the framework collapse of MOF-808, S-TiO2@MOF-808 showed much higher catalytic stability in reaction. The recombination of sulfur and TiO2 reduced the charge transfer resistance, accelerated the electron transfer rate, and improved ORR greatly. The maximum power density of S-TiO2@MOF-808-MFC was 84.05 mW/m2, about 2.17 times of S-TiO2-MFC (38.64 mW/m2). The maximum voltage of S-TiO2@MOF-808-MFC was 205 mV, and the stability was maintained for 6 d.

Remarkable photocatalytic performances towards pollutant degradation under sunlight and enhanced electrochemical properties of TiO2/polymer nanohybrids

In this work, TiO₂-based nanocomposites containing polyaniline (PANI), poly(1-naphthylamine) (PNA), and polyindole (PIN) were synthesized by effective and simple routes and posteriorly employed as photocatalysts and supercapacitors. Characterization techniques such as XRD, FTIR, FESEM, UV, and PL were employed to investigate the structural, morphological, and optical properties of materials. XRD analysis confirmed the successful formation of TiO₂ and TiO₂/polymer nanocomposites. PANI, PNA, and PIN polymers were well distributed on the surface of TiO₂ nanoparticles and were investigated/explored from the FESEM analysis. The visible light absorption and the recombination rate of photogenerated charge carriers were confirmed by the UV-Vis and PL analysis. The photocatalytic properties of the nanocomposites were investigated towards malachite green (MG) dye degradation under sunlight. The dye degradation efficiency followed the order TiO₂/PNA > TiO₂/PANI > TiO₂ > TiO₂/PIN. The higher efficiency of TiO₂/PNA can be associated with its smaller bandgap energy compared to the other materials. Electrochemical properties of materials were also examined by cyclic voltammetry and galvanostatic charge-discharge measurements using a three-electrode experiment setup in an aqueous electrolyte. TiO₂/PNA nanocomposite showed higher supercapacitor behavior compared to the other materials due to higher electrical conductivity of PNA and redox potential of TiO₂ (pseudocapacitance).

A Review on Recent Sensing Methods for Determining Formaldehyde in Agri-Food Chain: A Comparison with the Conventional Analytical Approaches

Formaldehyde, the simplest molecule of the aldehyde group, is a gaseous compound at room temperature and pressure, is colorless, and has a strong, pungent odor. It is soluble in water, ethanol, and diethyl ether and is used in solution or polymerized form. Its maximum daily dosage established by the EPA is 0.2 μg g−1 of body weight whereas that established by the WHO is between 1.5 and 14 mg g−1: it is in category 1A of carcinogens by IARC. From an analytical point of view, formaldehyde is traditionally analyzed by HPLC with UV-Vis detection. Nowadays, the need to analyze this compound quickly and in situ is increasing. This work proposes a critical review of methods for analyzing formaldehyde in food using sensing methods. A search carried out on the Scopus database documented more than 50 papers published in the last 5 years. The increase in interest in the recognition of the presence of formaldehyde in food has occurred in recent years, above all due to an awareness of the damage it can cause to human health. This paper focuses on some new sensors by analyzing their performance and comparing them with various no-sensing methods but focusing on the determination of formaldehyde in food products. The sensors reported are of various types, but they all share a good LOD, good accuracy, and a reduced analysis time. Some of them are also biodegradable and others have a very low cost, many are portable and easy to use, therefore usable for the recognition of food adulterations on site.