Functional Elements Coatings on the Plasma Electrolytic Oxidation-Treated Ti-6Al-4V Alloy by Electrochemical Precipitation Method

Study of Microscale Meniscus Confined Electrodeposition Based on COMSOL

The rate and quality of microscale meniscus confined electrodeposition represent the key to micromanipulation based on electrochemistry and are extremely susceptible to the ambient relative humidity, electrolyte concentration, and applied voltage. To solve this problem, based on a neural network and genetic algorithm approach, this paper optimizes the process parameters of the microscale meniscus confined electrodeposition to achieve high-efficiency and -quality deposition. First, with the COMSOL Multiphysics, the influence factors of electrodeposition were analyzed and the range of high efficiency and quality electrodeposition parameters were discovered. Second, based on the back propagation (BP) neural network, the relationships between influence factors and the rate of microscale meniscus confined electrodeposition were established. Then, in order to achieve effective electrodeposition, the determined electrodeposition rate of 5 × 10⁻⁸ m/s was set as the target value, and the genetic algorithm was used to optimize each parameter. Finally, based on the optimization parameters obtained, we proceeded with simulations and experiments. The results indicate that the deposition rate maximum error is only 2.0% in experiments. The feasibility and accuracy of the method proposed in this paper were verified.

Simulation of Picking Up Metal Microcomponents Based on Electrochemistry

The technology of picking up microcomponents plays a decisive role in the assembly of complex systems in micro- and nanoscale. The traditional method of picking up microcomponents with a mechanical manipulation tool can easily cause irreversible damage to the object, and only one object can be manipulated at a time. Furthermore, it is difficult to release the object with this method, and the release location is not accurate. With the aim of solving the above problems, the present study proposes an electrochemistry-based method for picking up metal microcomponents. First, the effect of ambient relative humidity on pickup was analyzed, and the effect of current density and electrolyte concentration on the deposition was examined. Then, a force analysis in the process of manipulation was carried out. Through the analysis of influence factors, the ideal experimental parameters were obtained theoretically. Finally, a simulation was carried out with COMSOL Multiphysics based on the above analysis. Copper microwires with a diameter of 60 μm and lengths of 300, 500, and 700 μm were successfully picked up and released using a pipette with a nozzle diameter of 15 μm. Compared with the traditional method, this method is simple to manipulate. Furthermore, it has a high success rate, causes less damage to the object, and good releasing accuracy.