Manganese Oxide Nanoarchitectures as Chemoresistive Gas Sensors to Monitor Fruit Ripening

Improved Ethanol Sensing Performance of α-MnO2 Nanorods at Room Temperature Enabled through PPy Embedding

Ethanol is a colorless, highly flammable, volatile organic compound and is a biomarker for fatty liver diseases. So, high-performance and reliable ethanol sensors are the need of the day for biomedical and environmental monitoring applications and drunken driving detection. In this work, we have reported a polypyrrole (PPy)-embedded α-MnO2 nanorod (NR)-based chemiresistive sensor for the selective detection of trace ethanol vapor at room temperature (25 °C). PPy-embedded α-MnO2 NR nanocomposites (MP25, MP50, and MP100) were synthesized by in situ chemical oxidative polymerization of pyrrole followed by mixing of α-MnO2 NR having different weight ratios. The prepared nanocomposites were characterized by various sophisticated instruments such as XRD, FTIR, Raman spectroscopy, BET, FESEM, TEM, EDX, UV-vis spectroscopy, and current-voltage (I-V) measurement. The as-prepared sensor, namely, PPy-embedded α-MnO2 nanorod (MP50), shows the highest response to ethanol vapor with a detection lower limit of 1 ppm at room temperature with rapid response (∼2.39 s) and recovery (∼37.08 s) times associated with at least 60 days stability, excellent selectivity, good repeatability, and reproducibility. The formation of a p-n heterojunction and transfer of charge carriers between PPy and MnO2 nanoparticles are attributed to the enhancement of sensing performance. Thus, the prepared sensor could be potentially applicable to detect ethanol content in alcoholic beverages, diagnose liver disease from exhale breath analysis, and drunken driving detection.

The enhanced sensing properties of MOS-based resistive gas sensors by Au functionalization: a review

Gas sensors are essential for detecting toxic gases that can harm social life or industrial production. Traditional metal oxide semiconductor (MOS)-based sensors suffer from shortcomings such as high operating temperature and slow response time, which limits their detection capabilities. Thus, there is a need to improve their performance. One useful technique is noble metal functionalization, which can effectively enhance the response/recovery time, sensitivity and selectivity, sensing response, and optimum operating temperature of MOS gas sensors. Among the noble metals, Au NPs are considered a promising material for forming composite sensing materials to achieve better sensing performance. This paper aims to review and discuss the recent research on Au-decorated MOS-based sensors, including Au/n-type MOS-based sensors, Au/p-type MOS-based sensors, Au/MOS/carbon composite materials, and Au/MOS/perovskite composite materials. The sensing mechanism of Au-functionalized MOS-based materials will also be examined.

Evaluation of mixed transition metal (Co, Mn, and Cu) oxide electrocatalysts anchored on different carbon supports for robust oxygen reduction reaction in neutral media

Oxygen reduction reaction (ORR) remains a pivotal factor in assessing the overall efficiency of energy conversion and storage technologies. A promising family of ORR electrocatalysts is mixed transition-metal oxides (MTMOs), which have recently gained a growing research interest. In this study, we developed MTMOs with different compositions (designated as A_xB_3−xO₄; A = Cu, B = Co or Mn) anchored on two different carbon supports (activated carbon Vulcan XC-72 (AC) and graphene (G)) for catalyzing ORR in neutral media. Four different MTMO electrocatalysts (i.e., MnO₂–CuO/AC, CoO–CuO/AC, CoO–CuO/G, and MnO₂–CuO/G) were synthesized by a simple and scalable co-precipitation method. We documented the morphology and electrocatalytic properties of MTMO electrocatalysts using transmission and scanning electron microscopy, X-ray diffraction (XRD), X-ray photoelectron spectrometer (XPS), energy dispersive X-ray (EDX), and electrochemical techniques. Generally, MTMOs exhibited remarkably high ORR electrocatalytic activity with MTMOs anchored on an activated carbon support outperforming their respective MTMOs anchored on a graphene support, highlighting the importance of the catalyst support in determining the overall ORR activity of electrocatalysts. MnO₂–CuO/AC has the highest diffusion limiting current density (j) value of 4.2 mA cm⁻² at −600 mV (vs. SHE), which is ∼1.1–1.7-fold higher than other tested electrocatalysts (i.e., 3.9, 3.5, and 2.7 mA cm⁻² for CoO–CuO/AC, CoO–CuO/G, and MnO₂–CuO/G, respectively), and slightly lower than Pt/C (5.1 mA cm⁻²) at the same potential value. Moreover, all electrocatalysts exhibited good linearity and parallelism of the Koutechy–Levich (K–L) plots, suggesting that ORR followed first-order reaction kinetics with the number of electrons involved being close to four. Benefiting from their remarkable ORR electrochemical activities and low cost, our results reveal that non-precious MTMOs are efficient enough to replace expensive Pt for broad applications in energy conversion and electrocatalysis in neutral media, such as microbial fuel cells.

Mixed transition metal (Co, Mn, and Cu) oxide electrocatalysts anchored on different carbon supports for oxygen reduction reaction.