Mapping of Uranium in Surrogate Nuclear Debris Using Laser-Induced Breakdown Spectroscopy (LIBS)

Detection of Off-Gassed Products From Molten Salts Using Laser-Induced Breakdown Spectroscopy

The detection of off-gassed sodium from molten sodium nitrate (NaNO3) at temperatures between 330 °C and 505 °C and off-gassed calcium from molten lithium chloride-potassium chloride eutectic (LKE) mixtures at 510 °C with laser-induced breakdown spectroscopy (LIBS) was demonstrated. NaNO3 and LKE samples were melted in a custom-built crucible that promoted the generation of off-gassed products from the molten sample. The off-gassed products were analyzed with a LIBS system designed to probe the high-temperature environment. Na D emission lines, Na(I)588.99 nm and Na(I) 589.59 nm, were detected from the NaNO3 samples after reaching a temperature threshold, which indicated the occurrence of phase change. In LKE mixtures, the detection of Ca impurities at a concentration of 78 mg/kg was possible using the emission lines Ca(II) 393.66 nm and Ca(II) 395.85 nm. This work demonstrates the real-time monitoring capabilities of LIBS in high-temperature environments that simulate the conditions of molten salt reactors.

Machine learning in analytical spectroscopy for nuclear diagnostics [Invited]

Analytical spectroscopy methods have shown many possible uses for nuclear material diagnostics and measurements in recent studies. In particular, the application potential for various atomic spectroscopy techniques is uniquely diverse and generates interest across a wide range of nuclear science areas. Over the last decade, techniques such as laser-induced breakdown spectroscopy, Raman spectroscopy, and x-ray fluorescence spectroscopy have yielded considerable improvements in the diagnostic analysis of nuclear materials, especially with machine learning implementations. These techniques have been applied for analytical solutions to problems concerning nuclear forensics, nuclear fuel manufacturing, nuclear fuel quality control, and general diagnostic analysis of nuclear materials. The data yielded from atomic spectroscopy methods provide innovative solutions to problems surrounding the characterization of nuclear materials, particularly for compounds with complex chemistry. Implementing these optical spectroscopy techniques can provide comprehensive new insights into the chemical analysis of nuclear materials. In particular, recent advances coupling machine learning methods to the processing of atomic emission spectra have yielded novel, robust solutions for nuclear material characterization. This review paper will provide a summation of several of these recent advances and will discuss key experimental studies that have advanced the use of analytical atomic spectroscopy techniques as active tools for nuclear diagnostic measurements.

10 kHz laser-induced schliere anemometry for velocity, Mach number, and static temperature measurements in supersonic flows

A new, to the best of our knowledge, technique for measuring velocity and Mach number in freestream flow is discussed and demonstrated. The technique, laser-induced schliere anemometry, uses a laser to write a laser-induced schliere in the flow, which can then be imaged using high-speed schlieren imaging. Here, we use a laser-induced plasma from the focusing of nanosecond-duration laser pulses from a pulse burst laser to write the disturbance. The resulting localized index of refraction gradient left from the plasma is tracked well beyond the plasma emission lifetime using schlieren imaging, and velocity is found from tracking or through a simple correlation analysis. The blast wave is also used to independently determine the Mach number via the Mach cone effect, which provides information about the mean static temperature. This technique shows great potential for use in characterizing freestream flow in supersonic facilities and is demonstrated here in a Mach 2 blowdown facility and a Mach 4 Ludwieg tube.

Time-Gated Single-Shot Picosecond Laser-Induced Breakdown Spectroscopy (ps-LIBS) for Equivalence-Ratio Measurements

Time-gated picosecond laser-induced breakdown spectroscopy (ps-LIBS) for the determination of local equivalence ratios in atmospheric-pressure adiabatic methane-air flames is demonstrated. Traditional LIBS for equivalence-ratio measurements employ nanosecond (ns)-laser pulses, which generate excessive amounts of continuum, reducing measurement accuracy and precision. Shorter pulse durations reduce the continuum emission by limiting avalanche ionization. Furthermore, by contrast the use of femtosecond lasers, plasma emission using picosecond-laser excitation has a high signal-to-noise ratio (S/N), allowing single-shot measurements suitable for equivalence-ratio determination in turbulent reacting flows. We carried out an analysis of the dependence of the plasma emission ratio H_α (656 nm)/N_II (568 nm) on laser energy and time-delay for optimization of S/N and minimization of measurement uncertainties in the equivalence ratios. Our finding shows that higher laser energy and shorter time delay reduces measurement uncertainty while maintaining high S/N. In addition to atmospheric-pressure flame studies, we also examine the stability of the ps-LIBS signal in a high-pressure nitrogen cell. The results indicate that the plasma emission and spatial position could be stable, shot-to-shot, at elevated pressure (up to 40 bar) using a lower excitation energy. Our work shows the potential of using ps-duration pulses to improve LIBS-based equivalence-ratio measurements, both in atmospheric and high-pressure combustion environments.

Measurement of electron density and temperature from laser-induced nitrogen plasma at elevated pressure (1-6 bar)

Laser-induced plasmas experience Stark broadening and shifts of spectral lines carrying spectral signatures of plasma properties. In this paper, we report time-resolved Stark broadening measurements of a nitrogen triplet emission line at 1-6 bar ambient pressure in a pure nitrogen cell. Electron densities are calculated using the Stark broadening for different pressure conditions, which are shown to linearly increase with pressure. Additionally, using a Boltzmann fit for the triplet, the electron temperature is calculated and shown to decrease with increasing pressure. The rate of plasma cooling is observed to increase with pressure. The reported Stark broadening based plasma diagnostics in nitrogen at high pressure conditions will be significantly useful for future studies on high-pressure combustion and detonation applications.

Quantitative Analysis of Cerium-Gallium Alloys Using a Hand-Held Laser Induced Breakdown Spectroscopy Device

A hand-held laser-induced breakdown spectroscopy device was used to acquire spectral emission data from laser-induced plasmas created on the surface of cerium-gallium alloy samples with Ga concentrations ranging from 0–3 weight percent. Ionic and neutral emission lines of the two constituent elements were then extracted and used to generate calibration curves relating the emission line intensity ratios to the gallium concentration of the alloy. The Ga I 287.4-nm emission line was determined to be superior for the purposes of Ga detection and concentration determination. A limit of detection below 0.25% was achieved using a multivariate regression model of the Ga I 287.4-nm line ratio versus two separate Ce II emission lines. This LOD is considered a conservative estimation of the technique’s capability given the type of the calibration samples available and the low power (5 mJ per 1-ns pulse) and resolving power ( λ / Δ λ = 4000) of this hand-held device. Nonetheless, the utility of the technique is demonstrated via a detailed mapping analysis of the surface Ga distribution of a Ce-Ga sample, which reveals significant heterogeneity resulting from the sample production process.