Microphysiological Models for Mechanistic-Based Prediction of Idiosyncratic DILI

Drug-induced liver injury (DILI) is a major contributor to high attrition rates among candidate and market drugs and a key regulatory, industry, and global health concern. While acute and dose-dependent DILI, namely, intrinsic DILI, is predictable and often reproducible in preclinical models, the nature of idiosyncratic DILI (iDILI) limits its mechanistic understanding due to the complex disease pathogenesis, and recapitulation using in vitro and in vivo models is extremely challenging. However, hepatic inflammation is a key feature of iDILI primarily orchestrated by the innate and adaptive immune system. This review summarizes the in vitro co-culture models that exploit the role of the immune system to investigate iDILI. Particularly, this review focuses on advancements in human-based 3D multicellular models attempting to supplement in vivo models that often lack predictability and display interspecies variations. Exploiting the immune-mediated mechanisms of iDILI, the inclusion of non-parenchymal cells in these hepatoxicity models, namely, Kupffer cells, stellate cells, dendritic cells, and liver sinusoidal endothelial cells, introduces heterotypic cell-cell interactions and mimics the hepatic microenvironment. Additionally, drugs recalled from the market in the US between 1996-2010 that were studies in these various models highlight the necessity for further harmonization and comparison of model characteristics. Challenges regarding disease-related endpoints, mimicking 3D architecture with different cell-cell contact, cell source, and the underlying multi-cellular and multi-stage mechanisms are described. It is our belief that progressing our understanding of the underlying pathogenesis of iDILI will provide mechanistic clues and a method for drug safety screening to better predict liver injury in clinical trials and post-marketing.

Advanced preclinical models for evaluation of drug-induced liver injury - consensus statement by the European Drug-Induced Liver Injury Network [PRO-EURO-DILI-NET]

Drug-induced liver injury (DILI) is a major cause of acute liver failure (ALF) and one of the leading indications for liver transplantation in Western societies. Given the wide use of both prescribed and over the counter drugs, DILI has become a major health issue for which there is a pressing need to find novel and effective therapies. Although significant progress has been made in understanding the molecular mechanisms underlying DILI, our incomplete knowledge of its pathogenesis and inability to predict DILI is largely due to both discordance between human and animal DILI in preclinical drug development and a lack of models that faithfully recapitulate complex pathophysiological features of human DILI. This is exemplified by the hepatotoxicity of acetaminophen (APAP) overdose, a major cause of ALF because of its extensive worldwide use as an analgesic. Despite intensive efforts utilising current animal and in vitro models, the mechanisms involved in the hepatotoxicity of APAP are still not fully understood. In this expert Consensus Statement, which is endorsed by the European Drug-Induced Liver Injury Network, we aim to facilitate and outline clinically impactful discoveries by detailing the requirements for more realistic human-based systems to assess hepatotoxicity and guide future drug safety testing. We present novel insights and discuss major players in APAP pathophysiology, and describe emerging in vitro and in vivo pre-clinical models, as well as advanced imaging and in silico technologies, which may improve prediction of clinical outcomes of DILI.

A Critical Perspective on 3D Liver Models for Drug Metabolism and Toxicology Studies

The poor predictability of human liver toxicity is still causing high attrition rates of drug candidates in the pharmaceutical industry at the non-clinical, clinical, and post-marketing authorization stages. This is in part caused by animal models that fail to predict various human adverse drug reactions (ADRs), resulting in undetected hepatotoxicity at the non-clinical phase of drug development. In an effort to increase the prediction of human hepatotoxicity, different approaches to enhance the physiological relevance of hepatic in vitro systems are being pursued. Three-dimensional (3D) or microfluidic technologies allow to better recapitulate hepatocyte organization and cell-matrix contacts, to include additional cell types, to incorporate fluid flow and to create gradients of oxygen and nutrients, which have led to improved differentiated cell phenotype and functionality. This comprehensive review addresses the drug-induced hepatotoxicity mechanisms and the currently available 3D liver in vitro models, their characteristics, as well as their advantages and limitations for human hepatotoxicity assessment. In addition, since toxic responses are greatly dependent on the culture model, a comparative analysis of the toxicity studies performed using two-dimensional (2D) and 3D in vitro strategies with recognized hepatotoxic compounds, such as paracetamol, diclofenac, and troglitazone is performed, further highlighting the need for harmonization of the respective characterization methods. Finally, taking a step forward, we propose a roadmap for the assessment of drugs hepatotoxicity based on fully characterized fit-for-purpose in vitro models, taking advantage of the best of each model, which will ultimately contribute to more informed decision-making in the drug development and risk assessment fields.

Validation of in vitro methods for human cytochrome P450 enzyme induction: Outcome of a multi-laboratory study

CYP enzyme induction is a sensitive biomarker for phenotypic metabolic competence of in vitro test systems; it is a key event associated with thyroid disruption, and a biomarker for toxicologically relevant nuclear receptor-mediated pathways. This paper summarises the results of a multi-laboratory validation study of two in vitro methods that assess the potential of chemicals to induce cytochrome P450 (CYP) enzyme activity, in particular CYP1A2, CYP2B6, and CYP3A4. The methods are based on the use of cryopreserved primary human hepatocytes (PHH) and human HepaRG cells. The validation study was coordinated by the European Union Reference Laboratory for Alternatives to Animal Testing of the European Commission's Joint Research Centre and involved a ring trial among six laboratories. The reproducibility was assessed within and between laboratories using a validation set of 13 selected chemicals (known human inducers and non-inducers) tested under blind conditions. The ability of the two methods to predict human CYP induction potential was assessed. Chemical space analysis confirmed that the selected chemicals are broadly representative of a diverse range of chemicals. The two methods were found to be reliable and relevant in vitro tools for the assessment of human CYP induction, with the HepaRG method being better suited for routine testing. Recommendations for the practical application of the two methods are proposed.

Conceptual Design of Micro-Bioreactors and Organ-on-Chips for Studies of Cell Cultures

Engineering design of microbioreactors (MBRs) and organ-on-chip (OoC) devices can take advantage of established design science theory, in which systematic evaluation of functional concepts and user requirements are analyzed. This is commonly referred to as a conceptual design. This review article compares how common conceptual design principles are applicable to MBR and OoC devices. The complexity of this design, which is exemplified by MBRs for scaled-down cell cultures in bioprocess development and drug testing in OoCs for heart and eye, is discussed and compared with previous design solutions of MBRs and OoCs, from the perspective of how similarities in understanding design from functionality and user purpose perspectives can more efficiently be exploited. The review can serve as a guideline and help the future design of MBR and OoC devices for cell culture studies.

Human hepatocytes derived from pluripotent stem cells: a promising cell model for drug hepatotoxicity screening

Drug-induced liver injury (DILI) is a frequent cause of failure in both clinical and post-approval stages of drug development, and poses a key challenge to the pharmaceutical industry. Current animal models offer poor prediction of human DILI. Although several human cell-based models have been proposed for the detection of human DILI, human primary hepatocytes remain the gold standard for preclinical toxicological screening. However, their use is hindered by their limited availability, variability and phenotypic instability. In contrast, pluripotent stem cells, which include embryonic and induced pluripotent stem cells (iPSCs), proliferate extensively in vitro and can be differentiated into hepatocytes by the addition of soluble factors. This provides a stable source of hepatocytes for multiple applications, including early preclinical hepatotoxicity screening. In addition, iPSCs also have the potential to establish genotype-specific cells from different individuals, which would increase the predictivity of toxicity assays allowing more successful clinical trials. Therefore, the generation of human hepatocyte-like cells derived from pluripotent stem cells seems to be promising for overcoming limitations of hepatocyte preparations, and it is expected to have a substantial repercussion in preclinical hepatotoxicity risk assessment in early drug development stages.

Mind the gap-deficits in our knowledge of aspects impacting the bioavailability of phytochemicals and their metabolites--a position paper focusing on carotenoids and polyphenols

Various secondary plant metabolites or phytochemicals, including polyphenols and carotenoids, have been associated with a variety of health benefits, such as reduced incidence of type 2 diabetes, cardiovascular diseases, and several types of cancer, most likely due to their involvement in ameliorating inflammation and oxidative stress. However, discrepancies exist between their putative effects when comparing observational and intervention studies, especially when using pure compounds. These discrepancies may in part be explained by differences in intake levels and their bioavailability. Prior to exerting their bioactivity, these compounds must be made bioavailable, and considerable differences may arise due to their matrix release, changes during digestion, uptake, metabolism, and biodistribution, even before considering dose- and host-related factors. Though many insights have been gained on factors affecting secondary plant metabolite bioavailability, many gaps still exist in our knowledge. In this position paper, we highlight several major gaps in our understanding of phytochemical bioavailability, including effects of food processing, changes during digestion, involvement of cellular transporters in influx/efflux through the gastrointestinal epithelium, changes during colonic fermentation, and their phase I and phase II metabolism following absorption.

Biotransformation in vitro: An essential consideration in the quantitative in vitro-to-in vivo extrapolation (QIVIVE) of toxicity data

Early consideration of the multiplicity of factors that govern the biological fate of foreign compounds in living systems is a necessary prerequisite for the quantitative in vitro-in vivo extrapolation (QIVIVE) of toxicity data. Substantial technological advances in in vitro methodologies have facilitated the study of in vitro metabolism and the further use of such data for in vivo prediction. However, extrapolation to in vivo with a comfortable degree of confidence, requires continuous progress in the field to address challenges such as e.g., in vitro evaluation of chemical-chemical interactions, accounting for individual variability but also analytical challenges for ensuring sensitive measurement technologies. This paper discusses the current status of in vitro metabolism studies for QIVIVE extrapolation, serving today's hazard and risk assessment needs. A short overview of the methodologies for in vitro metabolism studies is given. Furthermore, recommendations for priority research and other activities are provided to ensure further widespread uptake of in vitro metabolism methods in 21st century toxicology. The need for more streamlined and explicitly described integrated approaches to reflect the physiology and the related dynamic and kinetic processes of the human body is highlighted i.e., using in vitro data in combination with in silico approaches.

State-of-the-art of 3D cultures (organs-on-a-chip) in safety testing and pathophysiology

Integrated approaches using different in vitro methods in combination with bioinformatics can (i) increase the success rate and speed of drug development; (ii) improve the accuracy of toxicological risk assessment; and (iii) increase our understanding of disease. Three-dimensional (3D) cell culture models are important building blocks of this strategy which has emerged during the last years. The majority of these models are organotypic, i.e., they aim to reproduce major functions of an organ or organ system. This implies in many cases that more than one cell type forms the 3D structure, and often matrix elements play an important role. This review summarizes the state of the art concerning commonalities of the different models. For instance, the theory of mass transport/metabolite exchange in 3D systems and the special analytical requirements for test endpoints in organotypic cultures are discussed in detail. In the next part, 3D model systems for selected organs--liver, lung, skin, brain--are presented and characterized in dedicated chapters. Also, 3D approaches to the modeling of tumors are presented and discussed. All chapters give a historical background, illustrate the large variety of approaches, and highlight up- and downsides as well as specific requirements. Moreover, they refer to the application in disease modeling, drug discovery and safety assessment. Finally, consensus recommendations indicate a roadmap for the successful implementation of 3D models in routine screening. It is expected that the use of such models will accelerate progress by reducing error rates and wrong predictions from compound testing.

State-of-the-art of 3D cultures (organs-on-a-chip) in safety testing and pathophysiology

Integrated approaches using different in vitro methods in combination with bioinformatics can (i) increase the success rate and speed of drug development; (ii) improve the accuracy of toxicological risk assessment; and (iii) increase our understanding of disease. Three-dimensional (3D) cell culture models are important building blocks of this strategy which has emerged during the last years. The majority of these models are organotypic, i.e., they aim to reproduce major functions of an organ or organ system. This implies in many cases that more than one cell type forms the 3D structure, and often matrix elements play an important role. This review summarizes the state of the art concerning commonalities of the different models. For instance, the theory of mass transport/metabolite exchange in 3D systems and the special analytical requirements for test endpoints in organotypic cultures are discussed in detail. In the next part, 3D model systems for selected organs--liver, lung, skin, brain--are presented and characterized in dedicated chapters. Also, 3D approaches to the modeling of tumors are presented and discussed. All chapters give a historical background, illustrate the large variety of approaches, and highlight up- and downsides as well as specific requirements. Moreover, they refer to the application in disease modeling, drug discovery and safety assessment. Finally, consensus recommendations indicate a roadmap for the successful implementation of 3D models in routine screening. It is expected that the use of such models will accelerate progress by reducing error rates and wrong predictions from compound testing.

Modeling anesthetic developmental neurotoxicity using human stem cells

Mounting preclinical evidence in rodents and nonhuman primates has demonstrated that prolonged exposure of developing animals to general anesthetics can induce widespread neuronal cell death followed by long-term memory and learning disabilities. In vitro experimental evidence from cultured neonatal animal neurons confirmed the in vivo findings. However, there is no direct clinical evidence of the detrimental effects of anesthetics in human fetuses, infants, or children. Development of an in vitro neurogenesis system using human stem cells has opened up avenues of research for advancing our understanding of human brain development and the issues relevant to anesthetic-induced developmental toxicity in human neuronal lineages. Recent studies from our group, as well as other groups, showed that isoflurane influences human neural stem cell proliferation and neurogenesis, whereas ketamine induces neuroapoptosis. Application of this high throughput in vitro stem cell neurogenesis approach is a major stride toward ensuring the safety of anesthetic agents in young children. This in vitro human model allows us to (1) screen the toxic effects of various anesthetics under controlled conditions during intense neuronal growth, (2) find the trigger for the anesthetic-induced catastrophic chain of toxic events, and (3) develop prevention strategies to avoid this toxic effect. In this article, we reviewed the current findings in anesthetic-induced neurotoxicity studies, specifically focusing on the in vitro human stem cell model.

Characterization of hepatic markers in human Wharton's Jelly-derived mesenchymal stem cells

Stem cell technology could offer a unique tool to develop human-based in vitro liver models that are applicable for testing of potential liver toxicity early during drug development. In this context, recent research has indicated that human Wharton's Jelly-derived mesenchymal stem cells (hWJs) represent an interesting stem cell population to develop human hepatocyte-like cells. Here, an in-depth analysis of the expression of liver-specific transcription factors and other key hepatic markers in hWJs is evaluated at both the mRNA and protein level. Our results reveal that transcription factors that are mandatory to acquire and maintain an adult hepatic phenotype (HNF4A and HNF1A), as well as adult hepatic markers (ALB, CX32, CYP1A1, CYP1A2, CYP2B6 and CYP3A4) are not expressed in hWJs with the exception of K18. On the contrary, transcription factors involved in liver development (GATA4, GATA6, SOX9 and SOX17) and liver progenitor markers (DKK1, DPP4, DSG2, CX43 and K19) were found to be highly expressed in hWJs. These findings provide additional indication that hWJs could be a promising stem cell source to generate hepatocyte-like cells necessary for the development of a functional human-based in vitro liver model.

Assessment of cytochrome P450 (1A2, 2B6, 2C9 and 3A4) induction in cryopreserved human hepatocytes cultured in 48-well plates using the cocktail strategy

1. A fast, straightforward and cost-effective assay was validated for the assessment of CYP induction in cryopreserved human hepatocytes cultured in 48-well plates. The cocktail strategy (in situ incubation) was used to assess the induction of CYP1A2, CYP2B6, CYP2C9 and CYP3A4 by using the recommended probe substrate, i.e. phenacetin, bupropion, diclofenac and midazolam, respectively. 2. Cryopreserved human hepatocytes were treated for 72 h with prototypical reference inducers, β-naphthoflavone (25 µM), phenobarbital (500 µM) and rifampicin (10 µM) as positive controls for CYP induction. The use of a cocktail strategy has been validated and compared to the classical approach (single incubation). The need of using phase II inhibitor (salicylamide) in CYP induction assay was also investigated. 3. By using three different batches of cryopreserved human hepatocytes and our conditions of incubations, we showed that there was no relevant drug-drug interaction using the cocktail strategy. The same conclusions were observed when a broad range of enzyme activity has to be assessed (wide range of reference inducers, i.e. EC50-Emax experiment). In addition, the interassay reproducibility assessment showed that the day-to-day variability was minimal. 4. In summary, the study showed that the conditions used (probe substrates, concentration of probe substrate and time of incubation) for the cocktail approach were appropriate for investigations of CYP induction potential of new chemical entities. In addition, it was also clear that the use of salicylamide in the incubation media was not mandatory and could generate drug-drug interactions. For this reason, we recommend to not use salicylamide in CYP induction assay.

Stable isotope-assisted metabolomics to detect metabolic flux changes in mammalian cell cultures

The determination of metabolic fluxes provides detailed information of cellular physiology, and the assessment of metabolic flux changes upon a certain perturbation can help to improve biotechnological and pharmaceutical processes. Stable isotope-assisted metabolomics using tracer-labeled substrates is the method of choice to determine the fluxes. Though well-established for microbial cultures, the application to mammalian cells is generally complex and still limited. However, there have been great achievements in recent years and it is now emerging that stable isotope-assisted metabolic flux analysis in mammalian cell cultures will help improving biotechnological production and will also support drug development and discovery.

Latest advances in predicting DILI in human subjects: focus on biomarkers

INTRODUCTION

The quest for a biomarker that would reliably identify patients at risk of developing acute drug-induced liver injury (DILI) to a specific agent or class of agents before it occurs, has been underway for years. Historical host factors for DILI, such as older age and female gender, are not considered sufficient to truly predict an individual's inherent risk of DILI. In vitro and animal-based biomarker discoveries, in many instances, have not been considered accurate enough for drug development in human subjects nor for use in clinical practice.

AREAS COVERED

In order to assess the current state of biomarkers to predict idiosyncratic human DILI, the authors utilized the PubMed literature search tool to identify research reports dealing with clinical DILI biomarkers covering the period of 2010 through to June 2012. Studies involving pharmacogenetic, proteomic and toxicogenomic analyses are preferentially reviewed.

EXPERT OPINION

Although acute DILI has been linked to specific genetic associations (e.g., flucloxacillin and HLA-B*5701; and certain polymorphisms seen with anti-TB agent DILI), such predictors have been able to identify only some patients at risk for only a limited number of drugs. Proteomic-based biomarkers from stored sera in the US DILI Network, such as apolipoprotein E, have been identified as potential candidates, but require further study. As it currently stands, the quest for a widely applicable, validated DILI biomarker remains an ongoing clinical challenge.

How can measurement, monitoring, modeling and control advance cell culture in industrial biotechnology?

This report highlights the potential of measurement, monitoring, modeling and control (M(3) C) methodologies in animal and human cell culture technology. In particular, state-of-the-art of M(3) C technologies and their industrial relevance of existing technology are addressed. It is a summary of an expert panel discussion between biotechnologists and biochemical engineers with both academic and industrial backgrounds. The latest ascents in M(3) C are discussed from a cell culture perspective for industrial process development and production needs. The report concludes with a set of recommendations for targeting M(3) C research toward the industrial interests. These include issues of importance for biotherapeutics production, miniaturization of measurement techniques and modeling methods.

Metabolomics-on-a-chip and metabolic flux analysis for label-free modeling of the internal metabolism of HepG2/C3A cells

In vitro microfluidic systems are increasingly used as an alternative to standard Petri dishes in bioengineering and metabolomic investigations, as they are expected to provide cellular environments close to the in vivo conditions. In this work, we combined the recently developed "metabolomics-on-a-chip" approach with metabolic flux analysis to model the metabolic network of the hepatoma HepG2/C3A cell line and to infer the distribution of intracellular metabolic fluxes in standard Petri dishes and microfluidic biochips. A high pyruvate reduction to lactate was observed in both systems, suggesting that the cells operate in oxygen-limited environments. Our results also indicate that HepG2/C3A cells in the biochip are characterized by a higher consumption rate of oxygen, presumably due to a higher oxygenation rate in the microfluidic environment. This leads to a higher entry of the ultimate glycolytic product, acetyl-CoA, into the Krebs cycle. These findings are supported by the transcriptional activity of HepG2/C3A cells in both systems since we observed that genes regulated by a HIF-1 (hypoxia-regulated factor-1) transcriptional factor were over expressed under the Petri conditions, but to a lesser extent in the biochip.

The use of integrated and intelligent testing strategies in the prediction of toxic hazard and in risk assessment

There is increasing concern that insurmountable differences between humans and laboratory animals limit the relevance and reliability for hazard identification and risk assessment purposes of animal data produced by traditional toxicity test procedures. A way forward is offered by the emerging new technologies, which can be directly applied to human material or even to human beings themselves. This promises to revolutionise the evaluation of the safety of chemicals and chemical products of various kinds and, in particular, pharmaceuticals. The available and developing technologies are summarised and it is emphasised that they will need to be used selectively, in integrated and intelligent testing strategies, which, in addition to being scientifically sound, must be manageable and affordable. Examples are given of proposed testing strategies for general chemicals, cosmetic ingredients, candidate pharmaceuticals, inhaled substances, nanoparticles and neurotoxicity.