Applications of Scaffolds in Tissue Engineering: Current Utilization and Future Prospective

Current regenerative medicine tactics focus on regenerating tissue structures pathologically modified by cell transplantation in combination with supporting scaffolds and biomolecules. Natural and synthetic polymers, bioresorbable inorganic and hybrid materials, and tissue decellularized were deemed biomaterials scaffolding because of their improved structural, mechanical, and biological abilities.Various biomaterials, existing treatment methodologies and emerging technologies in the field of Three-dimensional (3D) and hydrogel processing, and the unique fabric concerns for tissue engineering. A scaffold that acts as a transient matrix for cell proliferation and extracellular matrix deposition, with subsequent expansion, is needed to restore or regenerate the tissue. Diverse technologies are combined to produce porous tissue regenerative and tailored release of bioactive substances in applications of tissue engineering. Tissue engineering scaffolds are crucial ingredients. This paper discusses an overview of the various scaffold kinds and their material features and applications. Tabulation of the manufacturing technologies for fabric engineering and equipment, encompassing the latest fundamental and standard procedures.

Articulation inspired by nature: A review of biomimetic and biologically active 3D printed scaffolds for cartilage tissue engineering

In the human body, articular cartilage facilitates the frictionless movement of synovial joints. However, due to its avascular and aneural nature, it has a limited ability to self-repair when damaged due to injury or wear and tear over time. Current surgical treatment options for cartilage defects often lead to the formation of fibrous, non-durable tissue and thus a new solution is required. Nature is the best innovator and so recent advances in the field of tissue engineering have aimed to recreate the microenvironment of native articular cartilage using biomaterial scaffolds. However, the inability to mirror the complexity of native tissue has hindered the clinical translation of many products thus far. Fortunately, the advent of 3D printing has provided a potential solution. 3D printed scaffolds, fabricated using biomimetic biomaterials, can be designed to mimic the complex zonal architecture and composition of articular cartilage. The bioinks used to fabricate these scaffolds can also be further functionalised with cells and/or bioactive factors or gene therapeutics to mirror the cellular composition of the native tissue. Thus, this review investigates how the architecture and composition of native articular cartilage is inspiring the design of biomimetic bioinks for 3D printing of scaffolds for cartilage repair. Subsequently, we discuss how these 3D printed scaffolds can be further functionalised with cells and bioactive factors, as well as looking at future prospects in this field.

The tissue engineering triad of biomaterials, cells and therapeutics as it applies to the formulation of biomimetic bioinks for cartilage repair. These bioinks can be functionalised with cells or cellular therapeutics to promote cartilage repair.

Collagen type II: From biosynthesis to advanced biomaterials for cartilage engineering

Collagen type II is the major constituent of cartilage tissue. Yet, cartilage engineering approaches are primarily based on collagen type I devices that are associated with suboptimal functional therapeutic outcomes. Herein, we briefly describe cartilage's development and cellular and extracellular composition and organisation. We also provide an overview of collagen type II biosynthesis and purification protocols from tissues of terrestrial and marine species and recombinant systems. We then advocate the use of collagen type II as a building block in cartilage engineering approaches, based on safety, efficiency and efficacy data that have been derived over the years from numerous in vitro and in vivo studies.

A Microfabrication Method of PCL Scaffolds for Tissue Engineering by Simultaneous Two PDMS Molds Replication

Not very far away, "tissue engineering" will become one of the most important branches of medical science for curing many types of diseases. This branch needs the cooperation of a wide range of sciences like medicine, chemistry, cellular biology, and genetic and mechanical engineering. Different parameters affect the final produced tissue, but the most important one is the quality and biocompatibility of the scaffold with the desired tissue which can provide the functionality of "native ECM" as well. The quality of the scaffold is directly dependent on its materials, design, and method of fabrication. As to the design and fabrication, there are two main categories: (a) random microporosity such as phase separation, electrospinning, and fused deposition modeling (3D printing) and (b) designed microporosity mostly achievable by stereo lithography and soft lithography. The method of fabrication implemented in this research is a novel method in soft lithography employing a type of "replica molding" with one pair of polydimethylsiloxane (PDMS) molds in contrast to traditional replica molding with just one single mold. In this operation, the solution of polycaprolactone in chloroform is initially prepared, and one droplet of the solution is placed between the molds while a preset pressure is applied to maintain the molds tightly together during the solidification of the polymer layer and vaporization of the solvent. Thus, a perfect warp and woof pattern is created. In this research, it has been approved that this is a feasible method for creating complex patterns and simple straight fiber patterns with different spacings and pore sizes. Cell attachment and migration was studied to find the optimum pore size. It was shown that the small pore size improves the cells' adhesion while reducing cell migration capability within the scaffold.

Nature-Based Biomaterials and Their Application in Biomedicine

Natural polymers, based on proteins or polysaccharides, have attracted increasing interest in recent years due to their broad potential uses in biomedicine. The chemical stability, structural versatility, biocompatibility and high availability of these materials lend them to diverse applications in areas such as tissue engineering, drug delivery and wound healing. Biomaterials purified from animal or plant sources have also been engineered to improve their structural properties or promote interactions with surrounding cells and tissues for improved in vivo performance, leading to novel applications as implantable devices, in controlled drug release and as surface coatings. This review describes biomaterials derived from and inspired by natural proteins and polysaccharides and highlights their promise across diverse biomedical fields. We outline current therapeutic applications of these nature-based materials and consider expected future developments in identifying and utilising innovative biomaterials in new biomedical applications.

Collagen-Based Electrospun Materials for Tissue Engineering: A Systematic Review

Collagen is a key component of the extracellular matrix (ECM) in organs and tissues throughout the body and is used for many tissue engineering applications. Electrospinning of collagen can produce scaffolds in a wide variety of shapes, fiber diameters and porosities to match that of the native ECM. This systematic review aims to pool data from available manuscripts on electrospun collagen and tissue engineering to provide insight into the connection between source material, solvent, crosslinking method and functional outcomes. D-banding was most often observed in electrospun collagen formed using collagen type I isolated from calfskin, often isolated within the laboratory, with short solution solubilization times. All physical and chemical methods of crosslinking utilized imparted resistance to degradation and increased strength. Cytotoxicity was observed at high concentrations of crosslinking agents and when abbreviated rinsing protocols were utilized. Collagen and collagen-based scaffolds were capable of forming engineered tissues in vitro and in vivo with high similarity to the native structures.

Recent Advances in Scaffolding from Natural-Based Polymers for Volumetric Muscle Injury

Volumetric Muscle Loss (VML) is associated with muscle loss function and often untreated and considered part of the natural sequelae of trauma. Various types of biomaterials with different physical and properties have been developed to treat VML. However, much work remains yet to be done before the scaffolds can pass from the bench to the bedside. The present review aims to provide a comprehensive summary of the latest developments in the construction and application of natural polymers-based tissue scaffolding for volumetric muscle injury. Here, the tissue engineering approaches for treating volumetric muscle loss injury are highlighted and recent advances in cell-based therapies using various sources of stem cells are elaborated in detail. An overview of different strategies of tissue scaffolding and their efficacy on skeletal muscle cells regeneration and migration are presented. Furthermore, the present paper discusses a wide range of natural polymers with a special focus on proteins and polysaccharides that are major components of the extracellular matrices. The natural polymers are biologically active and excellently promote cell adhesion and growth. These bio-characteristics justify natural polymers as one of the most attractive options for developing scaffolds for muscle cell regeneration.

Biopolymer Nanofibers for Nanogenerator Development

The development of nanogenerators (NGs) with optimal performances and functionalities requires more novel materials. Over the past decade, biopolymer nanofibers (BPNFs) have become critical sustainable building blocks in energy-related fields because they have distinctive nanostructures and properties and can be obtained from abundant and renewable resources. This review summarizes recent advances in the use of BPNFs for NG development. We will begin by introducing various strategies for fabricating BPNFs with diverse structures and performances. Then, we will systematically present the utilization of polysaccharide and protein nanofibers for NGs. We will mainly focus on the use of BPNFs to generate bulk materials with tailored structures and properties for assembling of triboelectric and piezoelectric NGs. The use of BPNFs to construct NGs for the generation of electricity from moisture and osmosis is also discussed. Finally, we illustrate our personal perspectives on several issues that require special attention with regard to future developments in this active field.

Electrospun Polymers in Cartilage Engineering-State of Play

Articular cartilage defects remain a clinical challenge. Articular cartilage defects progress to osteoarthritis, which negatively (e.g., remarkable pain, decreased mobility, distress) affects millions of people worldwide and is associated with excessive healthcare costs. Surgical procedures and cell-based therapies have failed to deliver a functional therapy. To this end, tissue engineering therapies provide a promise to deliver a functional cartilage substitute. Among the various scaffold fabrication technologies available, electrospinning is continuously gaining pace, as it can produce nano- to micro- fibrous scaffolds that imitate architectural features of native extracellular matrix supramolecular assemblies and can deliver variable cell populations and bioactive molecules. Herein, we comprehensively review advancements and shortfalls of various electrospun scaffolds in cartilage engineering.

A Parameter Study for 3D-Printing Organized Nanofibrous Collagen Scaffolds Using Direct-Write Electrospinning

Collagen-based scaffolds are gaining more prominence in the field of tissue engineering. However, readily available collagen scaffolds either lack the rigid structure (hydrogels) and/or the organization (biopapers) seen in many organ tissues, such as the cornea and meniscus. Direct-write electrospinning is a promising potential additive manufacturing technique for constructing highly ordered fibrous scaffolds for tissue engineering and foundational studies in cellular behavior, but requires specific process parameters (voltage, relative humidity, solvent) in order to produce organized structures depending on the polymer chosen. To date, no work has been done to optimize direct-write electrospinning parameters for use with pure collagen. In this work, a custom electrospinning 3D printer was constructed to derive optimal direct write electrospinning parameters (voltage, relative humidity and acetic acid concentrations) for pure collagen. A LabVIEW program was built to automate control of the print stage. Relative humidity and electrospinning current were monitored in real-time to determine the impact on fiber morphology. Fiber orientation was analyzed via a newly defined parameter (spin quality ratio (SQR)). Finally, tensile tests were performed on electrospun fibrous mats as a proof of concept.

Tissue Engineering: New Paradigm of Biomedicine

Tissue engineering is a multidisciplinary field of biomedicine that is being used to develop a new tissue or restore the function of diseased tissue/organ. The main objective of tissue engineering is to overcome the shortage of donor organs. Tissue engineering is mainly based on three components i.e. cells, scaffold and growth factors. Among these three components, scaffold is a primary influencing factor that provides the structural support to the cells and helps to deliver the growth factors which stimulate the proliferation and differentiation of cells to regenerate a new tissue. The properties of a scaffold mainly depend upon types of biomaterial and fabrication techniques that are used to fabricate the scaffold. Biofabrication facilitates the construction of three-dimensional complex of living (cells) and non-living (signaling molecules and extracellular matrices polymers etc.) components. Biofabrication has potential application especially in skin and bone tissue regeneration due to its accuracy, reproducibility and customization of scaffolds as well as cell and signaling molecule delivery. In this review article, different types of biomaterials and fabrication techniques have been discussed to fabricate of a nanofibrous scaffold along with different types of cells and growth factor which are used for tissue engineering applications to regenerate a new tissue. Among different techniques to fabricate a scaffold, electrospinning is simple and cost effective technique that has been mainly focused in the review to produce nanofibous scaffold. On the other hand, a tissue might be repair itself and restore to its normal function inside the body by applying the principle of regenerative medicine.

Advances in Porous Scaffold Design for Bone and Cartilage Tissue Engineering and Regeneration

IMPACT STATEMENT

Challenges in musculoskeletal tissue regeneration affect millions of patients globally. Scaffolds for tissue engineering bone and cartilage provide promising solutions that increase healing and decrease need for complicated surgical procedures. Porous scaffolds have emerged as an attractive alternative to traditional scaffolds. However, the success of advanced materials, use of biological factors, and manufacturing techniques can vary depending on use case. This review provides perspective on porous scaffold manufacturing, characterization and application, and can be used to inform future scaffold design.

Collagen Scaffolds in Cartilage Tissue Engineering and Relevant Approaches for Future Development

BACKGROUND

Cartilage tissue engineering (CTE) aims to obtain a structure mimicking native cartilage tissue through the combination of relevant cells, three-dimensional scaffolds, and extraneous signals. Implantation of 'matured' constructs is thus expected to provide solution for treating large injury of articular cartilage. Type I collagen is widely used as scaffolds for CTE products undergoing clinical trial, owing to its ubiquitous biocompatibility and vast clinical approval. However, the long-term performance of pure type I collagen scaffolds would suffer from its limited chondrogenic capacity and inferior mechanical properties. This paper aims to provide insights necessary for advancing type I collagen scaffolds in the CTE applications.

METHODS

Initially, the interactions of type I/II collagen with CTE-relevant cells [i.e., articular chondrocytes (ACs) and mesenchymal stem cells (MSCs)] are discussed. Next, the physical features and chemical composition of the scaffolds crucial to support chondrogenic activities of AC and MSC are highlighted. Attempts to optimize the collagen scaffolds by blending with natural/synthetic polymers are described. Hybrid strategy in which collagen and structural polymers are combined in non-blending manner is detailed.

RESULTS

Type I collagen is sufficient to support cellular activities of ACs and MSCs; however it shows limited chondrogenic performance than type II collagen. Nonetheless, type I collagen is the clinically feasible option since type II collagen shows arthritogenic potency. Physical features of scaffolds such as internal structure, pore size, stiffness, etc. are shown to be crucial in influencing the differentiation fate and secreting extracellular matrixes from ACs and MSCs. Collagen can be blended with native or synthetic polymer to improve the mechanical and bioactivities of final composites. However, the versatility of blending strategy is limited due to denaturation of type I collagen at harsh processing condition. Hybrid strategy is successful in maximizing bioactivity of collagen scaffolds and mechanical robustness of structural polymer.

CONCLUSION

Considering the previous improvements of physical and compositional properties of collagen scaffolds and recent manufacturing developments of structural polymer, it is concluded that hybrid strategy is a promising approach to advance further collagen-based scaffolds in CTE.

Electrospun protein nanofibers in healthcare: A review

Electrospun nanofibers are being utilized for a wide range of healthcare applications. A plethora of natural and synthetic polymers are exploited for their ability to be electrospun and replace the complex habitat provided by the extracellular matrix for the cells. The fabrication of nanofibers can be tuned to act as a multicarrier system to deliver drugs, growth factors and health supplements etc. in a sustained manner. Owing to its pliability, nanofibers reached its heights in tissue engineering and drug delivery applications. This review mainly focuses on various standardized parameters and optimized blending ratios for animal and plant proteins to yield fine, continuous nanofibers for effective utilization in various healthcare applications.

Biodegradable polymer scaffolds

Tissue engineering aims to repair the damaged tissue by transplantation of cells or introducing bioactive factors in a biocompatible scaffold. In recent years, biodegradable polymer scaffolds mimicking the extracellular matrix have been developed to promote the cell proliferation and extracellular matrix deposition. The biodegradable polymer scaffolds thus act as templates for tissue repair and regeneration. This article reviews the updated information regarding various types of natural and synthetic biodegradable polymers as well as their functions, physico-chemical properties, and degradation mechanisms in the development of biodegradable scaffolds for tissue engineering applications, including their combination with 3D printing.

Electrospun Nanofibers Surface-modified with Fluorescent Proteins

Electrospun nanofiber surfaces are modified with proteins to control protein release. A mixture of poly(ε-caprolactone) (PCL) and PCL—PEG block copolymers is electrospun to prepare amine-terminated block copolymers. The amount of surface exposed amine groups increases as the blend ratio of block copolymer increases. Cell attachments on the nanofibers change according to the ratio of the block copolymer in the blend; this indicates that the PEG moiety plays a significant role in enhancing and decreasing biocompatibility of nanofibers. Fluorescent proteins are immobilized on the surface of nanofibers by conjugating activated carboxylic groups of the protein to the surface exposed amine groups of nanofibers in an aqueous environment. The number of amine groups increases as the ratio of block copolymers increases. Proteins that are chemically associated with the nanofibers show an attenuated release profile while most of the proteins physically associated with the nanofibers are released in 1 day. These results show that the protein-immobilized nanofibers can be potentially applied to tissue engineering scaffolds and wound healing materials with bioactive protein being slowly released over a long period of time.

Perspectives On: Criteria for Complex Evaluation of the Morphology and Alignment of Electrospun Polymer Nanofibers

Electrospinning is a promising method for producing polymer materials composed of micro- and nanosized fibers. This method allows the preparation of random and aligned fibers of different morphologies, such as cylindrical or ribbon-shapes, defect-free or with defects, and with or without pores or porous. The increasing number of studies on electrospinning requires a set of criteria for more complex evaluation of the fiber morphology and the topology of these polymer materials to be established. The main characteristics necessary for a complex evaluation of the morphology of electrospun micro- and nanofibers have been systematized in this paper. Examples of characterization of the morphology and of the alignment of various micro- and nanofibers are given.

Preparation of PLLA/PEG Nanofibers by Electrospinning and Potential Applications

Poly(L-lactide) (PLLA)/polyethylene glycol (PEG) mixed solutions were successfully electrospun into micro-or nanofibrous polymer mats. The fiber diameter was in the range 100nm-6μm. The effect of the concentration of the spinning solutions and the ratio of PLLA/PEG on the fiber diameter and morphology was investigated. The hydrophilicity was tuned by varying the PLLA/PEG ratio. The tissue compatibility of the electrospun nanofibrous scaffolds was screened using two different cell models of human dermal fibroblasts and the osteoblast-like cell line MG-63. Both types of cells attached uniformly and approximately equally to all PLLA/PEG nanofibers. In long-term cultures osteoblast-like cells tend to spatially organize in tissue-like structure, particularly within the scaffold with the highest PEG content (PLLA/PEG at weight ratio 70/30). These results indicate that PLLA mixed with hydrophilic PEG produces a promising new biocompatible material for engineering scaffolds.

Multiscale Biofabrication of Articular Cartilage: Bioinspired and Biomimetic Approaches

Articular cartilage is the load-bearing tissue found inside all articulating joints of the body. It vastly reduces friction and allows for smooth gliding between contacting surfaces. The structure of articular cartilage matrix and cellular composition is zonal and is important for its mechanical properties. When cartilage becomes injured through trauma or disease, it has poor intrinsic healing capabilities. The spectrum of cartilage injury ranges from isolated areas of the joint to diffuse breakdown and the clinical appearance of osteoarthritis. Current clinical treatment options remain limited in their ability to restore cartilage to its normal functional state. This review focuses on the evolution of biomaterial scaffolds that have been used for functional cartilage tissue engineering. In particular, we highlight recent developments in multiscale biofabrication approaches attempting to recapitulate the complex 3D matrix of native articular cartilage tissue. Additionally, we focus on the application of these methods to engineering each zone of cartilage and engineering full-thickness osteochondral tissues for improved clinical implantation. These methods have shown the potential to control individual cell-to-scaffold interactions and drive progenitor cell differentiation into a chondrocyte lineage. The use of these bioinspired nanoengineered scaffolds hold promise for recreation of structure and function on the whole tissue level and may represent exciting new developments for future clinical applications for cartilage injury and restoration.

A comparative mechanical and biocompatibility study of poly(ε-caprolactone), hybrid poly(ε-caprolactone)–silk, and silk nanofibers by colloidal electrospinning technique for tissue engineering

Poly(ε-caprolactone) is an established polymer used in the fabrication of scaffolds for tissue engineering applications. Poly(ε-caprolactone)’s intrinsic hydrophobicity and toxicity, however, is greater than other natural polymers which limits its applicability. In this study, these problems were addressed by the modification of poly(ε-caprolactone) nanofibers with nanoparticles made from natural polymers, such as silk fibroin. Silk fibroin nanoparticles were prepared by desolvation and blended with poly(ε-caprolactone) to form a colloidal solution capable of forming nanofibers by electrospinning. Fabricated silk fibroin nanoparticles and three different nanofibers were characterized by transmission electron microscopy, variable pressure field emission scanning electron microscope, contact angle, Fourier transform infrared spectroscopy, thermogravimetric analysis, as well as an evaluation of their mechanical properties. The hybrid nanofibers incorporated with silk nanoparticles improved water absorbability compared to pure poly(ε-caprolactone) nanofibers and had much better mechanical properties than the silk fibroin nanofibers. The cytotoxicity and cell attachment tests were carried by culturing NIH 3T3 fibroblasts with the nanofibers. The hybrid nanofibers exhibited better cell viability and cell attachment than the pure poly(ε-caprolactone) nanofibers. Furthermore, the silk fibroin nanoparticles improved the water contact angle and enhanced cell interaction compared to the unmodified poly(ε-caprolactone). Based on these results, the modification of poly(ε-caprolactone) nanofibers with silk nanoparticles is a promising strategy for the improvement of poly(ε-caprolactone)-based nanofibers for future tissue engineering applications.

Direct and indirect co-culture of chondrocytes and mesenchymal stem cells for the generation of polymer/extracellular matrix hybrid constructs

In this work, the influence of direct cell-cell contact in co-cultures of mesenchymal stem cells (MSCs) and chondrocytes for the improved deposition of cartilage-like extracellular matrix (ECM) within nonwoven fibrous poly(∊-caprolactone) (PCL) scaffolds was examined. To this end, chondrocytes and MSCs were either co-cultured in direct contact by mixing on a single PCL scaffold or produced via indirect co-culture, whereby the two cell types were seeded on separate scaffolds which were then cultured together in the same system either statically or under media perfusion in a bioreactor. In static cultures, the chondrocyte scaffold of an indirectly co-cultured group generated significantly greater amounts of glycosaminoglycan and collagen than the direct co-culture group initially seeded with the same number of chondrocytes. Furthermore, improved ECM production was linked to greater cellular proliferation and distribution throughout the scaffold in static culture. In perfusion cultures, flow had a significant effect on the proliferation of the chondrocytes. The ECM contents within the chondrocyte-containing scaffolds of the indirect co-culture groups either approximated or surpassed the amounts generated within the direct co-culture group. Additionally, within bioreactor culture there were indications that chondrocytes had an influence on the chondrogenesis of MSCs as evidenced by increases in cartilaginous ECM synthetic capacity. This work demonstrates that it is possible to generate PCL/ECM hybrid scaffolds for cartilage regeneration by utilizing the factors secreted by two different cell types, chondrocytes and MSCs, even in the absence of juxtacrine signaling.

Guiding the orientation of smooth muscle cells on random and aligned polyurethane/collagen nanofibers

Fabricating scaffolds that can simulate the architecture and functionality of native extracellular matrix is a huge challenge in vascular tissue engineering. Various kinds of materials are engineered via nano-technological approaches to meet the current challenges in vascular tissue regeneration. During this study, nanofibers from pure polyurethane and hybrid polyurethane/collagen in two different morphologies (random and aligned) and in three different ratios of polyurethane:collagen (75:25; 50:50; 25:75) are fabricated by electrospinning. The fiber diameters of the nanofibrous scaffolds are in the range of 174–453 nm and 145–419 for random and aligned fibers, respectively, where they closely mimic the nanoscale dimensions of native extracellular matrix. The aligned polyurethane/collagen nanofibers expressed anisotropic wettability with mechanical properties which is suitable for regeneration of the artery. After 12 days of human aortic smooth muscle cells culture on different scaffolds, the proliferation of smooth muscle cells on hybrid polyurethane/collagen (3:1) nanofibers was 173% and 212% higher than on pure polyurethane scaffolds for random and aligned scaffolds, respectively. The results of cell morphology and protein staining showed that the aligned polyurethane/collagen (3:1) scaffold promote smooth muscle cells alignment through contact guidance, while the random polyurethane/collagen (3:1) also guided cell orientation most probably due to the inherent biochemical composition. Our studies demonstrate the potential of aligned and random polyurethane/collagen (3:1) as promising substrates for vascular tissue regeneration.

Generation of spatially aligned collagen fiber networks through microtransfer molding

The unique biomechanical properties of native tissue are governed by the organization and composition of integrated collagen and elastin networks. An approach for fabricating spatially aligned, fiber-reinforced composites with adjustable collagen fiber dimensions, layouts, and distribution within an elastin-like protein matrix yielding a biocomposite with controllable mechanical responses is reported. Microtransfer molding is employed for the fabrication of hollow and solid collagen fibers with straight or crimped fiber geometries. Collagen fibers (width: 2-50 μm, thickness: 300 nm to 3 μm) exhibit a Young's modulus of 126 ± 61 MPa and an ultimate tensile strength of 7 ± 3.2 MPa. As fiber networks within composite structures, straight fiber layouts display orthotropic responses with Young's modulus ranging from 0.95 ± 0.35 to 10.4 ± 0.5 MPa and tensile strength from 0.22 ± 0.08 to 0.87 ± 0.5 MPa with increasing fraction of collagen fibers (1-10%, v/v). In contrast, composites based on crimped fiber layouts exhibit strain-dependent stiffness with an increase in Young's modulus from 0.7 ± 0.14 MPa to 3.15 ± 0.49 MPa, at a specific transition strain. Through controlling the microstructure of engineered collagen fiber networks, a facile means is established to control macroscale mechanical responses of composite protein-based materials.

In vitro and in vivo cytocompatibility of electrospun nanofiber scaffolds for tissue engineering applications

An electrospun polymeric-based nanofibrous scaffold mimicking the extracellular matrix and serving as a temporary support for cell growth, adhesion, migration and proliferation.

Resemblance of electrospun collagen nanofibers to their native structure

Electrospinning is a promising method to mimic the native structure of the extracellular matrix. Collagen is the material of choice, since it is a natural fibrous structural protein. It is an open question how much the spinning process preserves or alters the native structure of collagen. There are conflicting results in the literature, mainly due to the different solvent systems in use and due to the fact that gelatin is employed as a reference state for the completely unfolded state of collagen in calculations. Here we used circular dichroism (CD) and Fourier-transform infrared spectroscopy (FTIR) to investigate the structure of regenerated collagen samples and scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to illuminate the electrospun nanofibers. Collagen is mostly composed of folded and unfolded structures with different ratios, depending on the applied temperature. Therefore, CD spectra were acquired as a temperature series during thermal denaturation of native calf skin collagen type I and used as a reference basis to extract the degree of collagen folding in the regenerated electrospun samples. We discussed three different approaches to determine the folded fraction of collagen, based on CD spectra of collagen from 185 to 260 nm, since it would not be sufficient to obtain simply the fraction of folded structure θ from the ellipticity at a single wavelength of 221.5 nm. We demonstrated that collagen almost completely unfolded in fluorinated solvents and partially preserved its folded structure θ in HAc/EtOH. However, during the spinning process it refolded and the PP-II fraction increased. Nevertheless, it did not exceed 42% as deduced from the different secondary structure evaluation methods, discussed here. PP-II fractions in electrospun collagen nanofibers were almost same, being independent from the initial solvent systems which were used to solubilize the collagen for electrospinning process.

Fabrication and characterization of multiscale electrospun scaffolds for cartilage regeneration

Recently, scaffolds for tissue regeneration purposes have been observed to utilize nanoscale features in an effort to reap the cellular benefits of scaffold features resembling extracellular matrix (ECM) components. However, one complication surrounding electrospun nanofibers is limited cellular infiltration. One method to ameliorate this negative effect is by incorporating nanofibers into microfibrous scaffolds. This study shows that it is feasible to fabricate electrospun scaffolds containing two differently scaled fibers interspersed evenly throughout the entire construct as well as scaffolds containing fibers composed of two discrete materials, specifically fibrin and poly(ε-caprolactone). In order to accomplish this, multiscale fibrous scaffolds of different compositions were generated using a dual extrusion electrospinning setup with a rotating mandrel. These scaffolds were then characterized for fiber diameter, porosity and pore size and seeded with human mesenchymal stem cells to assess the influence of scaffold architecture and composition on cellular responses as determined by cellularity, histology and glycosaminoglycan (GAG) content. Analysis revealed that nanofibers within a microfiber mesh function to maintain scaffold cellularity under serum-free conditions as well as aid the deposition of GAGs. This supports the hypothesis that scaffolds with constituents more closely resembling native ECM components may be beneficial for cartilage regeneration.

Strategic design and fabrication of engineered scaffolds for articular cartilage repair

Damage to articular cartilage can eventually lead to osteoarthritis (OA), a debilitating, degenerative joint disease that affects millions of people around the world. The limited natural healing ability of cartilage and the limitations of currently available therapies make treatment of cartilage defects a challenging clinical issue. Hopes have been raised for the repair of articular cartilage with the help of supportive structures, called scaffolds, created through tissue engineering (TE). Over the past two decades, different designs and fabrication techniques have been investigated for developing TE scaffolds suitable for the construction of transplantable artificial cartilage tissue substitutes. Advances in fabrication technologies now enable the strategic design of scaffolds with complex, biomimetic structures and properties. In particular, scaffolds with hybrid and/or biomimetic zonal designs have recently been developed for cartilage tissue engineering applications. This paper reviews critical aspects of the design of engineered scaffolds for articular cartilage repair as well as the available advanced fabrication techniques. In addition, recent studies on the design of hybrid and zonal scaffolds for use in cartilage tissue repair are highlighted.

Nanomaterials design and tests for neural tissue engineering

Nanostructured scaffolds recently showed great promise in tissue engineering: nanomaterials can be tailored at the molecular level and scaffold morphology may more closely resemble features of extracellular matrix components in terms of porosity, framing and biofunctionalities. As a consequence, both biomechanical properties of scaffold microenvironments and biomaterial-protein interactions can be tuned, allowing for improved transplanted cell engraftment and better controlled diffusion of drugs. Easier said than done, a nanotech-based regenerative approach encompasses different fields of know-how, ranging from in silico simulations, nanomaterial synthesis and characterization at the nano-, micro- and mesoscales to random library screening methods (e.g. phage display), in vitro cellular-based experiments and validation in animal models of the target injury. All of these steps of the "assembly line" of nanostructured scaffolds are tightly interconnected both in their standard analysis techniques and in their most recent breakthroughs: indeed their efforts have to jointly provide the deepest possible analyses of the diverse facets of the challenging field of neural tissue engineering. The purpose of this review is therefore to provide a critical overview of the recent advances in and drawbacks and potential of each mentioned field, contributing to the realization of effective nanotech-based therapies for the regeneration of peripheral nerve transections, spinal cord injuries and brain traumatic injuries. Far from being the ultimate overview of such a number of topics, the reader will acknowledge the intrinsic complexity of the goal of nanotech tissue engineering for a conscious approach to the development of a regenerative therapy and, by deciphering the thread connecting all steps of the research, will gain the necessary view of its tremendous potential if each piece of stone is correctly placed to work synergically in this impressive mosaic.

Electrospun composite polycaprolactone scaffolds for optimized tissue regeneration

There is evidence to suggest that the development of a stable microvasculature at the site of a critical-sized bone defect or fracture aids in repairing or regenerating bone. Identifying a tissue engineering scaffold that optimizes bone tissue and blood vessel development could improve regenerative capabilities. In this paper we study the proliferation and directed differentiation potentials of endothelial colony forming cells and mesenchymal stem cells cultured on electrospun polycaprolactone matrices and compare them with data obtained for composite polycaprolactone–hydroxyapatite, polycaprolactone–hydroxyapatite/β-tricalcium phosphate and polycaprolactone–small intestine submucosa electrospun matrices. Polycaprolactone–hydroxyapatite and polycaprolactone–hydroxyapatite/β-tricalcium phosphate fibers on average displayed a two-fold increase in fiber diameter and average pore-size area as compared with polycaprolactone or polycaprolactone–small intestine submucosa scaffolds. X-ray diffraction showed that significant additions of hydroxyapatite, hydroxyapatite/β-tricalcium phosphate and small intestine submucosa were present in the composite scaffolds. Incorporating hydroxyapatite or hydroxyapatite/β-tricalcium phosphate into the polycaprolactone fiber increased the modulus and ultimate tensile strength significantly. Both endothelial colony forming cell and mesenchymal stem cell proliferation was two-fold greater on polycaprolactone–small intestine submucosa scaffolds; whereas on polycaprolactone–hydroxyapatite and polycaprolactone–hydroxyapatite/β-tricalcium phosphate scaffolds only endothelial colony forming cell proliferation was observed to be significant. Alkaline phosphatase analysis for mesenchymal stem cell-seeded scaffolds indicated that only polycaprolactone–small intestine submucosa scaffolds displayed significant increases after 10 days of culture, suggesting an osteoblast phenotype. Electrospun polycaprolactone–small intestine submucosa scaffolds stimulated proliferation of both cell types and directed mesenchymal stem cell differentiation, providing a stable platform to investigate the potential of endothelial colony forming cell in directing bone tissue repair or regeneration.

Fabrication and evaluation of electrospun collagen/poly(N-isopropyl acrylamide)/chitosan mat as blood-contacting biomaterials for drug delivery

The recent advances in electrospinning have resulted in technologies facilitating easy drug entrapment, obtaining high surface area and thereby higher drug loading and release efficacy, burst control as well as the specific morphology which could be controlled according to the desired requirement. The present study focused on the fabrication of collagen/poly(N-isopropyl acrylamide)/chitosan complex with incorporated 5-fluorouracil, an anticancer drug by the method of electrospinning. The effect of chitosan on the fiber morphology and release kinetics was analyzed by varying its concentration. The release kinetics showed that the increase in chitosan concentration delayed the release of the drug from the fiber network. Nano hydroxyapatite was added to the fiber matrix in order to impart bioactivity, which was confirmed by studies in simulated body fluid. The addition of poly(N-isopropyl acrylamide) increased the blood compatibility of the prepared model. Thus, the model prepared to can find potential application in the field of cancer therapy as a drug-delivery agent in post-surgical treatment of cancer and as blood contacting biomaterial.

A denatured collagen microfiber scaffold seeded with human fibroblasts and keratinocytes for skin grafting

Biomaterial scaffolds are categorized into artificial or natural polymers, or combinations of the two. Artificial polymers often undergo serum protein adsorption, elicit foreign body and encapsulation immune responses post-implantation. Large pore bovine electrospun collagen I was therefore screened as a candidate for human keratinocyte and fibroblast cell scaffolds. Human HaCaT keratinocyte and dermal fibroblasts were seeded on electrospun denatured collagen I microfiber (DCM) scaffolds and after 72 h Livedead(®) assays performed to determine adhesive cell, survival and scaffold penetration. Both keratinocytes and fibroblasts attached to and survived on DCM scaffolds, however only fibroblasts migrated over and into this biomaterial. HaCaT keratinocytes remained largely stationary on the scaffold surface in discrete islands of monolayered cells. For this reason, normal human epidermal keratinocyte (NHEK) scaffold interactions were assessed using scanning and transmission electron microscopy (EM) that demonstrated DCM scaffolds comprised networks of interlocking and protruding collagen fibers with a mean diameter of 2-5 μm, with a mean inter-fiber pore size of 6.7 μm (range 3-10 μm) and scaffold thickness 50-70 μm. After 72 h the keratinocytes and fibroblasts on DCM scaffolds had attached, flattened and spread over the entire scaffold with assembly of lamellapodia and focal adhesion (FA)-like junctions. Using transmission EM, NHEKs and HaCaT keratinocytes assembled desmosomes, lamellapodia and FA junctions, however, neither hemidesmosomes nor basal lamina were present. In long term (21 day) co-culture fibroblasts migrated throughout the scaffold and primary keratinocytes (and to a lesser extend HaCaTs) stratified on the scaffold surface forming a human skin equivalent (HSE). In vivo testing of these HSEs on immunocompetent (BalbC) and immunodeficient (SCID) excisionally wounded model mice demonstrated scaffold wound biocompatibility and ability to deliver human cells after scaffold biodegradation.

Electrospinning jets and nanofibrous structures

Electrospinning is a process that creates nanofibers through an electrically charged jet of polymer solution or melt. This technique is applicable to virtually every soluble or fusible polymer and is capable of spinning fibers in a variety of shapes and sizes with a wide range of properties to be used in a broad range of biomedical and industrial applications. Electrospinning requires a very simple and economical setup but is an intricate process that depends on several molecular, processing, and technical parameters. This article reviews information on the three stages of the electrospinning process (i.e., jet initiation, elongation, and solidification). Some of the unique properties of the electrospun structures have also been highlighted. This article also illustrates some recent innovations to modify the electrospinning process. The use of electrospun scaffolds in the field of tissue engineering and regenerative medicine has also been described.

hMSC interaction with PCL and PCL/gelatin platforms: A comparative study on films and electrospun membranes

Polycaprolactone (PCL) and PCL/gelatin membranes and films were fabricated by electrospinning and solvent casting. A systematic analysis of the morphology evolution, as degradation occurred, was made to separate the contribution of fiber nanotexture and gelatin biochemical signal on cell adhesion and proliferation. Field emission scanning electron microscope was used to assess the contribution of platform architecture on the gelatin degradation by the morphological changes that occurred at different times. The evaluation of human mesenchymal stem cells’ biocompatibility confirmed the role of architecture and chemical composition on cell response. The nanostructured surfaces positively affected the cell recognition by increasing the surface area. The gelatin embedded in the PCL matrix of the nanofibers improved the cell/material interaction and provided support to the proliferation. The PCL/gelatin electrospun membranes showed an increase in mineralization when conditioned in osteogenic medium; this system has promise for long-term in vitro investigations of bone regeneration.

Spontaneous redifferentiation of dedifferentiated human articular chondrocytes on hydrogel surfaces

Chondrocytes rapidly dedifferentiate into a more fibroblastic phenotype on a two-dimensional polystyrene substratum. This impedes fundamental research on these cells as well as their clinical application. This study investigated the redifferentiation behavior of dedifferentiated chondrocytes on a hydrogel substratum. Dedifferentiated normal human articular chondrocyte-knee (NHAC-kn) cells were released from the sixth-passage monolayer cultured on a polystyrene surface. These cells were then subcultured on a chemically crosslinked copolymer hydrogel, that is, poly(NaAMPS-co-DMAAm), and the cells thus obtained were used as the seventh-passage cultivation. Copolymer gels were synthesized from a negatively charged monomer, the sodium salt of 2-acrylamido-2-methyl-1-propanesulfonic acid (NaAMPS), and a neutral monomer, N,N-dimethylacrylamide (DMAAm). These gels were of different compositions because the molar fraction (F) of NaAMPS was varied (F = 0, 0.2, 0.4, 0.6, 0.8, and 1.0). The dedifferentiated NHAC-kn cells spontaneously redifferentiated to normal NHAC-kn cells on neutral (F = 0) and poly(NaAMPS-co-DMAAm) hydrogels of low charge density (F = 0.2). This was deduced from the cell morphology and expression of cartilage-specific genes and proteins. These results should enable us to establish a simple and efficient method for preparing large amounts of chondrocytes by cultivation on the surfaces of neutral and low-charge-density hydrogels.